Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “differential inclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

$f$ 0 (980) production in inelastic pp collisions at s = 5.02 TeV

The measurement of the production of f 0 (980) in inelastic pp collisions at $\sqrt{s}$ = 5.02 TeV is presented. This is the first reported measurement of inclusive f 0 (980) yield at LHC energies. The production is measured at midrapidity, |y| < 0.5, in a wide transverse momentum range, 0 < p T < 16 GeV/c, by reconstructing the resonance in the f 0 (980) → π + π - hadronic decay channel using the ALICE detector. The p T -differential yields are compared to those of pions, protons and $φ$ mesons as well as to predictions from the HERWIG 7.2 QCD-inspired Monte Carlo event generator and calculations from a coalescence model that uses the AMPT model as an input. The ratio of the p T -integrated yield of f 0 (980) relative to pions is compared to measurements in e + e - and pp collisions at lower energies and predictions from statistical hadronisation models and HERWIG 7.2. A mild collision energy dependence of the f 0 (980) to pion production is observed in pp collisions from SPS to LHC energies. All considered models underpredict the p T -integrated 2f 0 (980)/(π + +π - ) ratio. The prediction from the canonical statistical hadronisation model assuming a zero total strangeness content of f 0 (980) is consistent with the data within 1.9σ and is the closest to the data. The results provide an essential reference for future measurements of the particle yield and nuclear modification in p–Pb and Pb–Pb collisions, which have been proposed to be instrumental to probe the elusive nature and quark composition of the f 0 (980) scalar meson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nuclear charge densities in spherical and deformed nuclei: Toward precise calculations of charge radii

Precise measurements of atomic transitions affected by electron-nucleus hyperfine interactions offer sensitivity to explore basic properties of the atomic nucleus and study fundamental symmetries, including the search for new physics beyond the standard model of particle physics. Specifically, such measurements, augmented by atomic and nuclear calculations, will enable extraction of the higher-order radial moments of the charge-density distribution in spherical and deformed nuclei. The new data impose higher precision requirements on a theoretical description. The nuclear charge density is composed of the proton point distribution folded with the nucleonic charge distributions. The latter induce subtle relativistic corrections due to the coupling of nucleon magnetic moments with the nuclear spin-orbit density. Additional corrections come from the effect of center-of-mass projection. We assess the precision of nuclear charge density calculations by studying the behavior of relativistic and center-of-mass motion corrections to the second and fourth charge radial moments. Special attention has been paid to the magnetic spin-orbit density associated with the local variations of the spin-orbit current. The calculations for semimagic and open-shell nuclei are performed in the framework of self-consistent mean-field theory using quantified energy density functionals and density-dependent pairing forces. We used the general expression for the spin-orbit form factor that is valid for spherical and deformed nuclei. We studied the impact of various correction terms on the charge radii, fourth radial moments, diffraction radii, and surface thickness of spherical and deformed nuclei. The spin-orbit corrections to charge radial moments and surface thickness show strong shell fluctuations which can make an appreciable effect when aiming at high-precision predictions of isotopic shifts. The inclusion of relativistic and center-of-mass corrections impacts the quality of energy density functionals optimized to charge radii data. To establish reliable constraints on the existence of new forces from isotope shift measurements, precise calculations of nuclear charge densities of deformed nuclei are needed. The proper inclusion of the spin-orbit charge density and other correction terms is essential when aiming at extraction of subtle effects which become particularly visible in isotopic trends. It is also important when developing high-quality nuclear energy density functionals optimized using heterogeneous datasets involving absolute charge radii, differential charge radii, and charge form factor properties deduced from electron-scattering data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Search for jet quenching effects in high-multiplicity pp collisions at $\sqrt{s}$ = 13 TeV via di-jet acoplanarity

The ALICE Collaboration reports a search for jet quenching effects in high-multiplicity (HM) proton-proton collisions at $\sqrt{s}$ = 13 TeV, using the semi-inclusive azimuthal-difference distribution Δφ of charged-particle jets recoiling from a high transverse momentum (high-p T,trig ) trigger hadron. Jet quenching may broaden the Δφ distribution measured in HM events compared to that in minimum bias (MB) events. The measurement employs a p T,trig -differential observable for data-driven suppression of the contribution of multiple partonic interactions, which is the dominant background. While azimuthal broadening is indeed observed in HM compared to MB events, similar broadening for HM events is observed for simulations based on the PYTHIA 8 Monte Carlo generator, which does not incorporate jet quenching. Detailed analysis of these data and simulations show that the azimuthal broadening is due to bias of the HM selection towards events with multiple jets in the final state. The identification of this bias has implications for all jet quenching searches where selection is made on the event activity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sensitivity of magnetohydrodynamic simulations of Joule-heated conductors to the vaporization curve in equations of state

Magnetohydrodynamic (MHD) simulations of electrically exploded aluminum and copper rods demonstrate a technique to validate equations of state (EOS) for rapidly Joule-heated conductors. The balance of internal and magnetic forces at the conductor-insulator interface drives the metal there along the vaporization phase boundary. Variations between critical points and vaporization curves in existing models predict differing densities and temperatures in MHD simulations for these models. Here, the inclusion of Maxwell constructs in the liquid-vapor biphase region of the EOS caused the rod surface to vaporize earlier in time than unmodified tables with van der Waals loops. Velocimetry of recent experiments is used to validate the location of the vaporization curve in existing EOS models and differentiate between the vapor dome treatments. Dielectric coatings applied to the metal surface restricted the conductor’s expansion and diverted the metal into the warm dense matter regime.

36 MATERIALS SCIENCE↗

The importance of temporal and spatial incoherence in quantitative interpretation of 4D-STEM

Recent developments in pixelated detectors, when combined with aberration correction of probe forming optics have greatly enhanced the field of scanning electron diffraction. Differential phase contrast is now routine and deep learning has been proposed as a method to extract maximum information from diffraction patterns. This study examines the effects of temporal and spatial incoherence on convergent beam electron diffraction patterns and demonstrates that simple center of mass measurements cannot be naively interpreted. The inclusion of incoherence in deep learning data sets is also discussed.

36 MATERIALS SCIENCE↗

Analyses of internal structures and defects in materials using physics-informed neural networks

Characterizing internal structures and defects in materials is a challenging task, often requiring solutions to inverse problems with unknown topology, geometry, material properties, and nonlinear deformation. Here, we present a general framework based on physics-informed neural networks for identifying unknown geometric and material parameters. By using a mesh-free method, we parameterize the geometry of the material using a differentiable and trainable method that can identify multiple structural features. We validate this approach for materials with internal voids/inclusions using constitutive models that encompass the spectrum of linear elasticity, hyperelasticity, and plasticity. We predict the size, shape, and location of the internal void/inclusion as well as the elastic modulus of the inclusion. Our general framework can be applied to other inverse problems in different applications that involve unknown material properties and highly deformable geometries, targeting material characterization, quality assurance, and structural design.

36 MATERIALS SCIENCE↗

Advanced Materials & Manufacturing Technology (AMMT): Process understanding for qualifying LPBF 316H SS

Investigations were conducted in fiscal years (FY) 2023 and 2024 to gather relevant data sets addressing challenges related to qualifying 316H stainless steel (SS) for use in future nuclear reactors. This work was a collaborative effort involving researchers from Idaho National Laboratory (INL), Argonne National Laboratory (ANL), and Oak Ridge National Laboratory (ORNL). Key outcomes included: • Development of process-structure-property data sets to better understand the relationships between manufacturing processes, material structure, and performance characteristics. • Establishment of an in-situ monitoring system to link these various data sets together. • Detailed characterization of the raw material feedstock to further strengthen the understanding of process-structure and process-property relationships. Building on this foundation, in FY25 there was interest in exploring the behavior of additively manufactured 316H SS under different test conditions to support the overall material qualification process. Los Alamos National Laboratory (LANL) was tasked with providing specimen samples to the collaborating labs, who then conducted a round-robin study examining factors like selective heat treatment, low-cycle fatigue (LCF), and tensile-creep (T-C) properties. Additionally, high-temperature differential scanning calorimetry (DSC) was performed by LANL to better understand how the material's thermal characteristics change as it is heated up to the melting point. This provided a more comprehensive understanding of the material's behavior. The combined results from these investigations could potentially be used to support the inclusion of 316H stainless steel in Section III, Division 5 of the relevant codes and standards, allowing its use in future nuclear reactor applications.

36 MATERIALS SCIENCE↗

First Ever Field Pilot on Alaska's North Slope to Validate the Use of Polymer Floods for Heavy Oil EOR a.k.a Alaska North Slope Field Laboratory (ANSFL)

Alaska’s high viscosity oil resources that range between 20–30+ billion barrels represent about a third of known North Slope original oil in place (OOIP). These resources are primarily concentrated in the Schrader Bluff formation (also called West Sak on the Western North Slope) and Ugnu reservoirs and are categorized as “viscous oils” and “heavy oils” owing to their in-situ viscosities between 5–10,000 cP and up to a million+ cP respectively. The viscous oil deposits are relatively deeper (2,000 – 5,000 ft), whereas the heavy oils are somewhat shallower (2,000 – 4,000 ft). The typically shallow depths and the proximity to the continuous permafrost results in relatively lower formation temperatures and pressures, and consequently higher viscosities. The vertical depth vs. viscosity delineated in Paskvan et al. (2016) differentiates the viscous and heavy oils. As depicted in Paskvan et al. (2016), currently the main focus (referred to as “developing”) is on the viscous oils in the Schrader Bluff formation in the Milne Point Unit (MPU). Notwithstanding this Alaska North Slope (ANS) specific categorization, we use the industry adopted, all-inclusive term “heavy oil” for all high viscosity oils. Resource characterization and additional details can be found in topical publications of Paskvan et al. (2016) and Targac et al. (2005). Despite the vast resource base, the development pace, vis-à-vis the production of heavy oils has been very slow and limited due to multiple factors such as cost, logistics, challenging arctic environment, poor waterflood sweep efficiency due to mobility contrasts, and significantly high minimum miscibility pressures (MMP). Most importantly, typical or standard thermal methods that are commonplace elsewhere (Canada, California) are inapplicable due to the continuous permafrost. As a consequence, cumulative production of heavy and viscous oils is a little over 1% of OOIP slope wide and currently, there is hardly any production from Ugnu. However, on a broader level, these unfavorable factors are outweighed by the fact that (1) these resources, within the established infrastructure, are too large to ignore because of their strategic importance to the Nation and the State of Alaska and (2) Prudhoe Bay type diluent crude oil is still available for heavy oil transport through the Trans Alaska Pipeline System (TAPS). Similarly, from a reservoir standpoint, the following factors also are important offsets: (1) favorable rock characteristics of Schrader Bluff; (2) the promise demonstrated by the initial scoping studies (Seright 2010, 2011) suggesting significant increase of heavy oil recovery using polymer flooding; (3) successful field implementation in Canada, China and elsewhere in the world, and (4) availability of the existing pairs of horizontal injector-producer in Schrader Bluff The foregoing was recognized as the best readily available opportunity for significant investment by the US Department of Energy and the field operator Hilcorp Alaska LLC to conduct the first ever field scale experiment to test the polymer flooding technology to unlock the vast heavy oil resources on ANS. With this primary goal in mind, the research team embarked on a ~4.5 years long project that focused on the field polymer pilot complemented by supporting laboratory and simulation studies. As documented in this final report, over the course of the project, many lessons have been learned and valuable field and supporting laboratory data has been collected, which also is complemented by numerical reservoir simulations. We have been able to establish the injectivity of polymer solution, evidence of significant reduction in the water cut of previously waterflooded pattern, effective propagation of a hydrolyzed polyacrylamide (HPAM), benefits of low salinity water, provide practical guidance on handling of produced fluids containing breakthrough polymer, fit-for-purpose forecast-worthy history matched simulation model, polymer EOR benefit of 700-1000 bopd over waterflood, and most importantly a low polymer utilization factor of ~1.7 lb/stb. In summary this project is deemed as a scientific, technical and economic success, having met all objectives, fulfilled deliverables and within budget, providing impetus to apply polymer EOR throughout the Milne Point Field paving the way for even heavier viscosity oils in the Ugnu area, eventually extending the economic life of TAPS.

02 PETROLEUM↗

Comparative Uptake Patterns of Radioactive Iodine and [18F]-Fluorodeoxyglucose (FDG) in Metastatic Differentiated Thyroid Cancers

Background: Metastatic differentiated thyroid cancer (DTC) represents a molecularly heterogeneous group of cancers with varying radioactive iodine (RAI) and [ 18 F]-fluorodeoxyglucose (FDG) uptake patterns potentially correlated with the degree of de-differentiation through the so-called “flip-flop” phenomenon. However, it is unknown if RAI and FDG uptake patterns correlate with molecular status or metastatic site. Materials and Methods: A retrospective analysis of metastatic DTC patients (n = 46) with radioactive 131-iodine whole body scan (WBS) and FDG-PET imaging between 2008 and 2022 was performed. The inclusion criteria included accessible FDG-PET and WBS studies within 1 year of each other. Studies were interpreted by two blinded radiologists for iodine or FDG uptake in extrathyroidal sites including lungs, lymph nodes, and bone. Cases were stratified by BRAF V600E mutation status, histology, and a combination of tumor genotype and histology. The data were analyzed by McNemar’s Chi-square test. Results: Lung metastasis FDG uptake was significantly more common than iodine uptake (WBS: 52%, FDG: 84%, p = 0.04), but no significant differences were found for lymph or bone metastases. Lung metastasis FDG uptake was significantly more prevalent in the papillary pattern sub-cohort (WBS: 37%, FDG: 89%, p = 0.02) than the follicular pattern sub-cohort (WBS: 75%, FDG: 75%, p = 1.00). Similarly, BRAF V600E+ tumors with lung metastases also demonstrated a preponderance of FDG uptake (WBS: 29%, FDG: 93%, p = 0.02) than BRAF V600E- tumors (WBS: 83%, FDG: 83%, p = 1.00) with lung metastases. Papillary histology featured higher FDG uptake in lung metastasis (WBS: 39%, FDG: 89%, p = 0.03) compared with follicular histology (WBS: 69%, FDG: 77%, p = 1.00). Patients with papillary pattern disease, BRAF V600E+ mutation, or papillary histology had reduced agreement between both modalities in uptake at all metastatic sites compared with those with follicular pattern disease, BRAF V600E- mutation, or follicular histology. Low agreement in lymph node uptake was observed in all patients irrespective of molecular status or histology. Conclusions: The pattern of FDG-PET and radioiodine uptake is dependent on molecular status and metastatic site, with those with papillary histology or BRAF V600E+ mutation featuring increased FDG uptake in distant metastasis. Further study with an expanded cohort may identify which patients may benefit from specific imaging modalities to recognize and surveil metastases.

60 APPLIED LIFE SCIENCES↗

Transverse-momentum-dependent parton distributions up to N 3 LL from Drell-Yan data

We present an extraction of unpolarised Transverse-Momentum-Dependent Parton Distribution Functions (TMD PDFs or TMDs) based on Drell-Yan production data from different experiments, including those at the LHC, and spanning a wide kinematic range. We include resummation of leading logarithms up to N 3 LL accuracy. The high per- turbative accuracy and the inclusion of non-perturbative contributions, along with a sound treatment of the experimental uncertainties, allow us to obtain a remarkable agreement with the data. We show that higher-order perturbative corrections are in fact crucial to achieve a suitable description of the data. In addition, we show that the precise rapidity- differential cross sections measured by the ATLAS experiment at 7 and 8 TeV provide a marked sensitivity to the x dependence of TMDs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Differential two-particle number and momentum correlations with the AMPT, UrQMD, and EPOS models in Pb-Pb collisions at s N N = 2.76 TeV

We report studies of charge-independent and charge-dependent two-particle differential number correlation functions, R 2 (Δη,Δφ), and transverse momentum correlation functions, P 2 (Δη,Δφ), of charged particles produced in Pb–Pb collisions at the LHC center-of-mass energy √sNN= 2.76 TeV with the UrQMD, AMPT, and EPOS models. Model calculations for R2 and P2 correlation functions are presented for inclusive charged hadrons (h ± ) in selected transverse momentum ranges and with full azimuthal coverage in the pseudorapidity range |η|<1.0. We compare these calculations for the strength, shape, and particularly the width of the correlation functions with recent measurements of these observables by the ALICE collaboration. Our analysis indicates that comparative studies of R 2 and P 2 correlation functions provide valuable insight towards the understanding of particle production in Pb–Pb collisions. We find, in particular, that these models produce quantitatively different magnitudes and shapes for these correlation functions and none reproduce the results reported by the ALICE collaboration. Accounting for quantum number conservation in models, particularly charge conservation, is mandatory to reproduce the detailed measurements of number and transverse momentum correlation functions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

First measurement of $Ω^0_c$ production in pp collisions at $\sqrt{s}=$13 TeV

The inclusive production of the charm–strange baryon $Ω^0_c$ is measured for the first time via its hadronic decay into Ω – π + at midrapidity(|y| < 0.5) in proton–proton (pp) collisions at the centre-of-mass energy $\sqrt{s}=$ 13 TeV with the ALICE detector at the LHC. The transverse momentum (p T ) differential cross section multiplied by the branching ratio is presented in the interval 2 < p T < 12 GeV/c. The p T dependence of the $Ω^0_c$-baryon production relative to the prompt D 0 -meson and to the prompt $Ξ^0_c$-baryon production is compared to various models that take different hadronisation mechanisms into consideration. In the measured p T interval, the ratio of the p T -integrated cross sections of $Ω^0_c$ and prompt $Λ^+_c$ baryons multiplied by the Ω – π + branching ratio is found to be larger by a factor of about 20 with a significance of about 4σ when compared to e + e – collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of a $ {\varLambda}_b^0 $ - $ {\overline{\varLambda}}_b^0 $ production asymmetry in proton-proton collisions at $ \sqrt{s} $ = 7 and 8 TeV

This article presents differential measurements of the asymmetry between $ {\varLambda}_b^0 $ - $ {\overline{\varLambda}}_b^0 $ baryon production rates in proton-proton collisions at centre-of-mass energies of $\sqrt{s}$ = 7 and 8 TeV collected with the LHCb experiment, corresponding to an integrated luminosity of 3 fb -1 . The ${\varLambda}_b^0 $ baryons are reconstructed through the inclusive semileptonic decay ${\varLambda}_b^0 $ → Λ+c μ - $\overline{ν}$ μX. The production asymmetry is measured both in intervals of rapidity in the range 2.15 < y < 4.10 and transverse momentum in 2 < p T < 27 GeV/c. The results are found to be incompatible with symmetric production with a significance of 5.8 standard deviations for both $\sqrt{s}$ = 7 and 8 TeV data, assuming no CP violation in the decay. There is evidence for a trend as a function of rapidity with a significance of 4 standard deviations. Comparisons to predictions from hadronisation models in PYTHIA and heavy-quark recombination are provided. This result constitutes the first observation of a particle-antiparticle asymmetry in b-hadron production at LHC energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of Ω c 0 baryon production and branching-fraction ratio BR ( Ω c 0 → Ω - e + ν e ) / BR ( Ω c 0 → Ω - π + ) in p p collisions at s = 13 TeV

The inclusive production of the charm-strange baryon $Ω^0_c$ is measured for the first time via its semileptonic decay into $Ω$ - e + ν e at midrapidity (|y| < 0.8) in proton-proton (pp) collisions at the center-of mass energy $\sqrt{s}$ = 13 TeV with the ALICE detector at the LHC. The transverse momentum (p T ) differential cross section multiplied by the branching ratio is presented in the interval 2 < p T < 12 GeV=c. The branching-fraction ratio BR($Ω^0_c$ → $Ω$ - e + ν e )/BR($Ω^0_c$→ Ω - π + ) is measured to be 1.12 ± 0.22 (stat) ± 0.27 (syst). Comparisons with other experimental measurements, as well as with theoretical calculations, are presented

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of cold nuclear matter effects for inclusive J / ψ in p +Au collisions at s NN = 200 GeV

Measurement by the STAR experiment at RHIC of the cold nuclear matter (CNM) effects experienced by inclusive J / ψ at mid-rapidity in 0-100% p +Au collisions at s NN = 200 GeV is presented. Such effects are quantified utilizing the nuclear modification factor, R p Au , obtained by taking a ratio of J / ψ yield in p +Au collisions to that in p + p collisions scaled by the number of binary nucleon-nucleon collisions. The differential J / ψ yield in both p + p and p +Au collisions is measured through the dimuon decay channel, taking advantage of the trigger capability provided by the Muon Telescope Detector in the RHIC 2015 run. Consequently, the J / ψ R p Au is derived within the transverse momentum ( p T ) range of 0 to 10 GeV/ c . A suppression of approximately 30% is observed for p T < 2 GeV/ c , while J / ψ R p Au becomes compatible with unity for p T greater than 3 GeV/ c , indicating the J / ψ yield is minimally affected by the CNM effects at high p T . Comparison to a similar measurement from 0-20% central Au+Au collisions reveals that the observed strong J / ψ suppression above 3 GeV/ c is mostly due to the hot medium effects, providing strong evidence for the formation of the quark-gluon plasma in these collisions. Several model calculations show qualitative agreement with the measured J / ψ R p Au , while their agreement with the J / ψ yields in p + p and p +Au collisions is worse.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the inclusive $t\bar{t}$ production cross section in the lepton + jets channel in $pp$ collisions at $\sqrt{s}$ = 7 TeV with the ATLAS detector using support vector machines

A measurement of the top quark pair-production cross section in the lepton + jets decay channel is presented. It is based on 4.6 fb -1 of $\sqrt{s}$ = 7 TeV pp collision data collected during 2011 by the ATLAS experiment at the CERN Large Hadron Collider. A three-class, multidimensional event classifier based on support vector machines is used to differentiate $t\bar{t}$ events from backgrounds. The $t\bar{t}$ production cross section is found to be σ $t\bar{t}$ = 168.5 ± 0.7(stat)$^{+6.2}_{-5.9}$(syst)$^{+ 3.4}_{-3.2}$(lumi) pb. In conclusion, the result is consistent with the Standard Model prediction based on QCD calculations at next-to-next-to-leading order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Inclusive quarkonium production in pp collisions at $\sqrt{s}$ = 5.02 TeV

This article reports on the inclusive production cross section of several quarkonium states, J/ψ, ψ(2S), $\mathcal{Υ}$(1S), $\mathcal{Υ}$(2S), and $\mathcal{Υ}$(3S), measured with the ALICE detector at the LHC, in pp collisions at $\sqrt{s}$=5.02 TeV. The analysis is performed in the dimuon decay channel at forward rapidity ( 2.5 < y < 4). The integrated cross sections and transverse-momentum (p T ) and rapidity (y) differential cross sections for J/ψ, ψ(2S), $\mathcal{Υ}$(1S), and the ψ(2S) -to-J/ψ cross section ratios are presented. The integrated cross sections, assuming unpolarized quarkonia, are: σ J/ψ (p T <20 GeV/c) = 5.88 ± 0.03 ± 0.34 μb, σ ψ(2S) (p T <12 GeV/c) = 0.87 ± 0.06 ± 0.10 μb, σ Υ(1S) (p T <15 GeV/c) = 45.5 ± 3.9 ± 3.5 nb, σ Υ(2S) (p T <15 GeV/c) = 22.4 ± 3.2 ± 2.7 nb, and σ Υ(3S) (p T <15 GeV/c) = 4.9 ± 2.2 ± 1.0 nb, where the first (second) uncertainty is the statistical (systematic) one. For the first time, the cross sections of the three $\mathcal{Υ}$ states, as well as the ψ(2S) one as a function of p T and y , are measured at $\sqrt{s}$=5.02 TeV at forward rapidity. These measurements also significantly extend the J/ψ p T reach and supersede previously published results. A comparison with ALICE measurements in pp collisions at $\sqrt{s}$=2.76, 7, 8, and 13 TeV is presented and the energy dependence of quarkonium production cross sections is discussed. Finally, the results are compared with the predictions from several production models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Exploring the impact of high-precision top-quark pair production data on the structure of the proton at the LHC

The impact of recent LHC top-quark pair production single differential cross section measurements at 13 TeV collision energy on the structure of the proton is explored. In particular, the impact of these high-precision data on the gluon and other parton distribution functions (PDFs) of the proton at intermediate and large partonic momentum fraction x is analyzed. This study extends the CT18 global analysis framework to include these new data. The interplay between top-quark pair and inclusive jet production as well as other processes at the LHC, is studied. In addition, a study of the impact of scale choice on the theory description of the new 13 TeV t t ¯ measurements is performed. Published by the American Physical Society 2024

Astronomy & Astrophysics↗