Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data predictive control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Overview and Evaluation of a Computational Bone Physiology Modeling Toolchain and Its Application to Testing of Exercise Countermeasures

Prolonged microgravity exposure disrupts natural bone remodeling processes and can lead to a significant loss of bone strength, increasing injury risk during missions and placing astronauts at a greater risk of bone fracture later in life. Resistance-based exercise during missions is used to combat bone loss, but current exercise countermeasures do not completely mitigate the effects of microgravity. To address this concern, we present work to develop a personalizable, site-specific computational modeling toolchain of bone remodeling dynamics to understand and estimate changes in volumetric bone mineral density (BMD) in response to microgravity-induced bone unloading and in-flight exercise. The toolchain is evaluated against data collected from subjects in a 70-day bed rest study and is found to provide insight into the amount of exercise stimulus needed to minimize bone loss, quantitatively predicting post-study volumetric BMD of control subjects who did not perform exercise, and qualitatively predicting the effects of exercise. Results suggest that, with additional data, the toolchain could be improved to aid in developing customized in-flight exercise regimens and predict exercise effectiveness.

Schepelmann, Alexander↗
NASA NTRS1982

Aerodynamic comparisons of STS-1 Space Shuttle entry vehicle

A conventional flight-test program, which slowly and cautiously approaches more severe flight conditions, was not possible with the Orbiter. On the first flight, the Orbiter entered the atmosphere at Mach 28 and decelerated through the Mach range. (The subsonic portion of flight was also flown by another orbiter vehicle during the Approach and Landing Test Program.) Certification for the first flight was achieved by an extensive wind-tunnel test and analysis program and by restricting the flight maneuvers severely. The initial flights of the orbiter were heavily instrumented for the purpose of obtaining accurate aerodynamic data. Even without maneuvers to excite the system, the first flight provided comparisons between flight and wind-tunnel-derived predicted data in the areas of aerodynamic performance, longitudinal trim, and reaction-control jet interaction. The aerodynamic performance comparisons are presented.

Young, J. C.↗
NASA NTRS1991

Rotor noise

The physical characteristics and sources of rotorcraft noise as they exist today are presented. Emphasis is on helicopter-like vehicles, that is, on rotorcraft in nonaxial flight. The mechanisms of rotor noise are reviewed in a simple physical manner for the most dominant sources of rotorcraft noise. With simple models, the characteristic time- and frequency-domain features of these noise sources are presented for idealized cases. Full-scale data on several rotorcraft are then reviewed to allow for the easy identification of the type and extent of the radiating noise. Methods and limitations of using scaled models to test for several noise sources are subsequently presented. Theoretical prediction methods are then discussed and compared with experimental data taken under very controlled conditions. Finally, some promising noise reduction technology is reviewed.

Schmitz, F. H.↗
NASA NTRS1992

The F-18 High Alpha Research Vehicle: A High-Angle-of-Attack Testbed Aircraft

The F-18 High Alpha Research Vehicle is the first thrust-vectoring testbed aircraft used to study the aerodynamics and maneuvering available in the poststall flight regime and to provide the data for validating ground prediction techniques. The aircraft includes a flexible research flight control system and full research instrumentation. The capability to control the vehicle at angles of attack up to 70 degrees is also included. This aircraft was modified by adding a pitch and yaw thrust-vectoring system. No significant problems occurred during the envelope expansion phase of the program. This aircraft has demonstrated excellent control in the wing rock region and increased rolling performance at high angles of attack. Initial pilot reports indicate that the increased capability is desirable although some difficulty in judging the size and timing of control inputs was observed. The aircraft, preflight ground testing and envelope expansion flight tests are described.

Regenie, Victoria↗
NASA NTRS1992

Operational seasonal and interannual predictions of ocean conditions

Dr. Leetmaa described current work at the U.S. National Meteorological Center (NMC) on coupled systems leading to a seasonal prediction system. He described the way in which ocean thermal data is quality controlled and used in a four dimensional data assimilation system. This consists of a statistical interpolation scheme, a primitive equation ocean general circulation model, and the atmospheric fluxes that are required to force this. This whole process generated dynamically consist thermohaline and velocity fields for the ocean. Currently routine weekly analyses are performed for the Atlantic and Pacific oceans. These analyses are used for ocean climate diagnostics and as initial conditions for coupled forecast models. Specific examples of output products were shown both in the Pacific and the Atlantic Ocean.

Leetmaa, Ants↗
NASA NTRS1992

The F-18 High Alpha Research Vehicle - A high-angle-of-attack testbed aircraft

The F-18 High Alpha Research Vehicle is the first thrust-vectoring testbed aircraft used to study the aerodynamics and maneuvering available in the poststall flight regime and to provide the data for validating ground prediction techniques. The aircraft includes a flexible research flight control system and full research instrumentation. The capability to control the vehicle at angles of attack up to 70 degrees is also included. This aircraft was modified by adding a pitch and yaw thrust-vectoring system. No significant problems occurred during the envelope expansion phase of the program.

Regenie, Victoria↗
NASA NTRS1993

SAO mission support software and data standards, version 1.0

This document defines the software developed by the SAO AXAF Mission Support (MS) Program and defines standards for the software development process and control of data products generated by the software. The SAO MS is tasked to develop and use software to perform a variety of functions in support of the AXAF mission. Software is developed by software engineers and scientists, and commercial off-the-shelf (COTS) software is used either directly or customized through the use of scripts to implement analysis procedures. Software controls real-time laboratory instruments, performs data archiving, displays data, and generates model predictions. Much software is used in the analysis of data to generate data products that are required by the AXAF project, for example, on-orbit mirror performance predictions or detailed characterization of the mirror reflection performance with energy.

Hsieh, P.↗
NASA NTRS1994

Large-displacement structural durability analyses of simple bend specimen emulating rocket nozzle liners

Large-displacement elastic and elastic-plastic, finite-element stress-strain analyses of an oxygen-tree high-conductivity (OFHC) copper plate specimen were performed using an updated Lagrangian formulation. The plate specimen is intended for low-cost experiments that emulate the most important thermomechanical loading and failure modes of a more complex rocket nozzle. The plate, which is loaded in bending at 593 C, contains a centrally located and internally pressurized channel. The cyclic crack initiation lives were estimated using the results from the analyses and isothermal strain-controlled low-cycle fatigue data for OFHC copper. A comparison of the predicted and experimental cyclic lives showed that an elastic analysis predicts a longer cyclic life than that observed in experiments by a factor greater than 4. The results from elastic-plastic analysis for the plate bend specimen, however, predicted a cyclic life in close agreement with experiment, thus justifying the need for the more rigorous stress-strain analysis.

Arya, Vinod K.↗
NASA NTRS1994

(abstract) Navigating through the Venus Atmosphere

This paper presents the problems and challenges of the Magellan Navigation Team. The challenges are: 1) to predict the periapsis time to an accuracy of less than 100 seconds, 2) to accurately predict the dynamic pressure incurred by the spacecraft, 3) to model and to generate this prediction in a timely manner, 4) to provide navigation support 7 days per week for 70 days with 3 navigators and one graphic specialist to generate a daily package for presentation and display. The problems encountered by the Navigation Team in order to meet the above challenges are: 1) the uncertainty in the Venus atmosphere model, 2) the uncertainty in the Venus gravity model, 3) the uncertainty in predicting the attitude control thruster firing, 4) the sparse amount of radiometric tracking data, 5) the radiometric data editing is complicated by the effects of the Venus atmosphere fluctuations.

Venus↗
NASA NTRS1982

Analysis of rotary balance data for the F-15 airplane including the effect of conformal fuel tanks

F-15 rotary balance data was analyzed, and the influence of control deflections, Reynolds number and airplane components, i.e., body, wing, horizontal and vertical tails, as well as conformal tanks, on the aerodynamics up to 90 degrees angle of attack are discussed. Steady state spin mode predictions using these data are presented, which show excellent correlation with spin tunnel and flight test results. Generally, the data shows damped yawing moment slopes with rotation at all angles of attack, and good control effectiveness. Differences in the rotary aerodynamics due to the addition of conformal tanks are minimal. The small differences in the region of the flat spin do, however, indicate that the resulting spin mode would be slightly flatter and faster for a conformal tank equipped airplane. The addition of conformal tanks make the airplane more departure susceptible.

Barnhart, B.↗
NASA NTRS1996

Improved Models for the Porous Surface with Passive Control

A computational investigation of afterbody flow using a passive control method is conducted. The passive control method consists of a porous surface placed over a plenum. The purpose of the passive control method is to exploit the adverse pressure gradient present in afterbody flow in an attempt to reduce boundary layer separation and afterbody drag. Four different porous wall models are used to model the transpiration velocity in the region of passive control. A three-dimensional, time-dependent, Reynolds-averaged, simplified Navier-Stokes solver, PAB3D, is used to simulate afterbody flow with and without passive control. Three afterbody configurations with boat-tail angles of 10, 20, and 30 deg. are used to obtain two-dimensional solutions with a freestream Mach number of 0.6 and nozzle pressure ratio of 6. The region of passive control was initially placed from 20-60% of the nozzle length. The effect of the porous placement and porous extent is also studied. Baseline (no porosity) two-dimensional solutions are qualitatively similar to experimental data but under-predict the magnitude of the pressure recovery. Results for the subsonic solutions show losses in the pressure recovery for some cases with passive control. Three-dimensional effects are also investigated and seen to be very significant. Three-dimensional baseline solutions, for both sub- and super-critical freestream Mach numbers, compare very favorably with the experimental data in comparison to the two-dimensional solution. Future work is required to examine three-dimensional afterbody flows with passive porosity.

Kraushaar, Sandra L.↗
NASA NTRS1982

Quantitative tests of a steady state theory of solar wind electrons

A comparison is made of IMP 6, 7 and 8 electron data with the predictions of a solar wind electron steady state theory in which the control of transport by the macroscopic interplanetary electric and magnetic fields, as well as elastic Coulomb collisions with solar wind protons and thermal electrons, is assumed. While a ratio of forward to backward phase density for field-aligned extrathermal electrons of 6:1 is predicted, electron distribution measurements within the high speed solar wind show this ratio to be typically about an order of magnitude larger. A set of solar wind bulk speed anticorrelations predicted by the theory on the basis of a larger set of assumptions cannot be found in the IMP electron data set, so that improved agreement may require such modifications of the theory's assumptions as the inclusion of inelastic Coulomb and/or wave electron collisions.

Feldman, W. C.↗
NASA NTRS2020

Investigating Effects of Controlled Flights through Fast-Time Simulation

Departure flights at major U.S. airports are often subject to Traffic Management Initiatives to mitigate congestion and delay due to demand-capacity imbalances. These controlled flights can lead to inefficiency and delay on the airport surface. The integrated arrival, departure, and surface traffic management capabilities developed by NASA’s Airspace Technology Demonstration 2 (ATD-2) sub-project provide enhanced operational efficiency and predictability of flight operations through data exchange and integration, surface metering, and automated coordination of release time of controlled flights for overhead stream insertion. This paper evaluates the impacts of controlled flights on airport performance and assesses the ATD-2 benefits of pushback hold advisories for both controlled and non-controlled flights using fast-time simulation for Charlotte Douglas International Airport.

controlled flight↗
NASA NTRS1990

System identification requirements for high-bandwidth rotorcraft flight control system design

The application of system identification methods to high-bandwidth rotorcraft flight control system design is examined. Flight test and modeling requirements are illustrated using flight test data from a BO-105 hingeless rotor helicopter. The proposed approach involves the identification of nonparametric frequency-response models followed by parametric (transfer funtion and state space) model identification. Results for the BO-105 show the need for including coupled body/rotor flapping and lead-lag dynamics in the identification model structure to allow the accurate prediction of control system bandwidth limitations. Lower-order models are useful for estimating nominal control system performance only when the flight data used for the identification are band-limited to be consistent with the frequency range of applicability of the model. The flight test results presented in this paper are consistent with theoretical studies by previous researchers.

Tischler, Mark B.↗
NASA NTRS1973

AE-C attitude determination and control prelaunch analysis and operations plan

A description of attitude control support being supplied by the Mission and Data Operations Directorate is presented. Included are descriptions of the computer programs being used to support the missions for attitude determination, prediction, and control. In addition, descriptions of the operating procedures which will be used to accomplish mission objectives are provided.

Werking, R. D.↗
NASA NTRSDate not supplied

A CFD Validation Study using Artemis 1 Orbital Slosh Test Data

Advancements in liquid propellant management science and technologies are key to increasing safety, decreasing cost, and increasing payload mass of NASA space missions. Liquid propellant usually comprises a large portion of the total mass of launch vehicles and spacecraft, so predicting and controlling the motion of it are important. Computational fluid dynamics (CFD) programs are critical to predicting slosh dynamics, but CFD programs require experimental validation with physically relevant test data before the results can be trusted. Low-gravity slosh test data is lacking, and most of what exists is inadequate for CFD validation. A potential slosh risk for Orion, and the lack of validated low-gravity slosh models, led to performing on-orbit slosh tests during the Artemis 1 mission to assess the impacts of slosh on the guidance, navigation, and control of Orion. This work details the validation of a coupled slosh-motion CFD model using the Orion orbital slosh test data set.

CFD↗
NASA NTRSDate not supplied

A CFD Validation Study Using Artemis 1 Orbital Slosh Test Data

Advancements in liquid propellant management science and technologies are key to increasing safety, decreasing cost, and increasing payload mass of NASA space missions. Liquid propellant usually comprises a large portion of the total mass of launch vehicles and spacecraft, so predicting and controlling the motion of it are important. Computational fluid dynamics (CFD) programs are critical to predicting slosh dynamics, but CFD programs require experimental validation with physically relevant test data before the results can be trusted. Low-gravity slosh test data is lacking, and most of what exists is inadequate for CFD validation. A potential slosh risk for Orion, and the lack of validated low-gravity slosh models, led to performing on-orbit slosh tests during the Artemis 1 mission to assess the impacts of slosh on the guidance, navigation, and control of Orion. This work details the validation of a coupled slosh-motion CFD model using the Orion orbital slosh test data set.

CFD↗
NASA NTRS1984

JT15D simulated flight data evaluation

The noise characteristics of the JT15D turbofan engine was analyzed with the objectives of: (1) assessing the state-of-art ability to simulate flight acoustic data using test results acquired in wind tunnel and outdoor (turbulence controlled) environments; and (2) predicting the farfield noise directivity of the blade passage frequency (BPF) tonal components using results from rotor blade mounted dynamic pressure instrumentation. Engine rotor tip speeds at subsonic, transonic, and supersonic conditions were evaluated. The ability to simulate flight results was generally within 2-3 dB for both outdoor and wind tunnel acoustic results. Some differences did occur in the broadband noise level and in the multiple-pure-tone harmonics at supersonic tip speeds. The prediction of blade passage frequency tone directivity from dynamic pressure measurements was accomplished for the three tip speed conditions. Predictions were made of the random and periodic components of the tone directivity. The technique for estimating the random tone component used hot wire data to establish a correlation between dynamic pressure and turbulence intensity. This prediction overestimated the tone level by typically 10 dB with the greatest overestimates occurring at supersonic conditions.

Holm, R. G.↗