Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “critical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Failure modes, effects and criticality analyses.

Failure mode, effects and criticality analyses were developed by NASA as a means of assuring that hardware built for space applications has the desired reliability characteristics. The failure mode and effects analysis is a qualitative reliability technique for systematically analyzing each possible failure mode within a hardware system, and identifying the resulting effect on that system, the mission and personnel. The criticality analysis is a quantitative procedure which ranks the critical failure modes according to their probability of occurrence. This paper describes the failure modes, effects analysis and the criticality analysis. It employs a simple hardware system, not related to the aerospace field, to illustrate the method. It encourages application of this type of analysis to industrial development programs outside the aerospace and defense complex.

Jordan, W. E.↗
NASA NTRS1973

The choking pressure ratio of a critical flow venturi

The critical flow venturi has many important applications in the measurement and control of gas flow. In many of these applications, it is desirable to minimize the pressure loss required to maintain critical flow conditions. The performance of the venturi may be characterized by the ratio of outlet static pressure to inlet total pressure just sufficiently small to produce critical flow. This ratio is called choking pressure ratio. The optimization of diffusers for critical flow venturis is discussed and suggestions for designs practice are presented. Test results are given for six different diffuser configurations, and a comparison is made with data on 11 configurations from other investigators. It is shown that, for the small divergence angles considered, a simply defined diffuser effectiveness parameter is approximately independent of flow conditions and may be used to predict choking pressure ratio.

Hillbrath, H. S.↗
NASA NTRS1974

Study of a flight monitor for jet engine disk cracks using the critical length criterion of fracture mechanics

A disk crack detector is discussed which is intended to operate while in flight. The crack detector monitors the disk rim for radial surface cracks emanating from the blade root interface. An eddy current type sensor with a remotely located capacitance-resistance bridge and signal analyzer is able to detect reliably a simulated crack 1/8 in. long. The sensor was tested at rim velocities of 600 fps and at 1000 F. Fracture mechanics is used to calculate the critical crack length. Knowledge of the crack growth rate permits the calculation of the number of stress cycles remaining for the detected crack to grow to critical size. A plot is presented of the remaining life as a function of the critical crack length and the operating stress. It is shown that for a disk of Inconel 718 a through-the-thickness crack operating under a rim stress of 50 kpsi has a critical length of 0.7-in. and a remaining life of 130 flights.

Barranger, J. P.↗
NASA NTRS1974

Normalizing parameters for the critical flow rate of simple fluids through nozzles

It is shown that two-phase critical nozzle flow of simple fluids almost obeys the principle of corresponding states. Quantum fluid departures from the principle are resolved as a function of temperature for para-hydrogen and helium. The critical flow rates are normalized, using a normalizing parameter for which the critical flow rates of all simple fluids reduce to a single isothermal curve. The expression obtained for the normalizing parameter is shown to provide good agreement with the experiment for the critical flow rates of nitrogen, oxygen, and para-hydrogen.

Hendricks, R. C.↗
NASA NTRS1975

Experimental evaluation of multiplane-multispeed rotor balancing through multiple critical speeds

The experimentally proven range of application of the influence-coefficient balancing method, especially the least-squares procedure, is extended to include the case of multiple bending critical speeds within the operating range of a test rotor. Tests were conducted on a laboratory quality machine capable of speeds up to 18,000 rpm in order to investigate several distinct practical aspects of flexible-rotor balancing. These include: (1) balancing for operation through four bending critical speeds, (2) balancing of rotors mounted in both rigid and flexible bearing supports, (3) balancing of rotors with various amounts of measured vibration-response data and different numbers of correction planes, and (4) balancing of rotors with different arbitrary initial-unbalance configurations. The results show that a lightly damped, flexible rotor can be balanced systematically and efficiently through four bending critical speeds. It is concluded that the influence-coefficient method should be equally applicable to rotors or shafts having more than four bending critical speeds in their operating-speed ranges.

Tessarzik, J. M.↗
NASA NTRS1977

Velocity and temperature profiles in near-critical nitrogen flowing past a horizontal flat plate

Boundary layer velocity and temperature profiles were measured for nitrogen near its thermodynamic critical point flowing past a horizontal flat plate. The results were compared measurements made for vertically upward flow. The boundary layer temperatures ranged from below to above the thermodynamic critical temperature. For wall temperatures below the thermodynamic critical temperature there was little variation between the velocity and temperature profiles in three orientations. In all three orientations the point of crossing into the critical temperature region is marked by a significant flattening of the velocity and temperature profiles and also a decrease in heat transfer coefficient.

Simoneau, R. J.↗
NASA NTRS1978

Critical fault patterns determination in fault-tolerant computer systems

The method proposed tries to enumerate all the critical fault-patterns (successive occurrences of failures) without analyzing every single possible fault. The conditions for the system to be operating in a given mode can be expressed in terms of the static states. Thus, one can find all the system states that correspond to a given critical mode of operation. The next step consists in analyzing the fault-detection mechanisms, the diagnosis algorithm and the process of switch control. From them, one can find all the possible system configurations that can result from a failure occurrence. Thus, one can list all the characteristics, with respect to detection, diagnosis, and switch control, that failures must have to constitute critical fault-patterns. Such an enumeration of the critical fault-patterns can be directly used to evaluate the overall system tolerance to failures. Present research is focused on how to efficiently make use of these system-level characteristics to enumerate all the failures that verify these characteristics.

Mccluskey, E. J.↗
NASA NTRS1978

Critical phenomena experiments in space

The paper analyzes several types of critical phenomena in fluids, shows how they are affected by the presence of gravity, and describes how experiments conducted in an orbiting laboratory under low gravity conditions could extend the range of measurements needed to study critical phenomena. Future experiments are proposed. One would be a careful measurement of the dielectric constant in a low gravity environment. Two basic problems that can benefit especially from space experiments are the specific heat near the critical point and the shear viscosity at the gas-liquid critical point.

Sengers, J. V.↗
NASA NTRS1982

A relationship between chemical structure and the critical temperature

The present investigation is concerned with the effect of both molecular weight and chemical structure on the critical temperature. Using data from the comprehensive compilation of critical constants of Kudchadker et al. (1968), a simple relationship could be developed between the critical temperature and chemical structure. This relationship does not require experimental data such as the normal boiling point. It was found that the critical temperature (Tc) is given by an expression containing m and the sum of delta-i, where m is the total number of atoms in the molecule and delta-i is a number whose value is obtained from a table of additive atomic, group, and structural constants.

Fedors, R. F.↗
NASA NTRS1985

Critical Transport Phenomena in Fluid Helium Under Low Gravity

The feasibility of carrying out measurements of certain critical transport properties of pure fluid under conditions of low gravity was studied. These properties are the thermal conductivity, kappa, the shear viscosity zeta and the diffusive relaxation time tau, which are predicted to diverge (tend to infinity) as the liquid-vapor critical point is approached. However, in this critical region, the Earth's gravity effect becomes very important. As the critical point is approached, the gravity effects increasingly distort the results. The reason for this is that the compressibility of the fluid also diverges and under the influence of gravity causes a vertical density gradient in the fluid, which is significant even when very thin fluid layers (typically 1 mm high) are being used. The result is that the temperature dependence of kappa, zeta, and tau tends to flatten off as T sub c is approached instead of continuing to increase, and therefore the predictions from the renormalization group and mode coupling theories cannot be subjected to a satisfactory test.

Meyer, H.↗
NASA NTRS1986

Efficient identification of critical stresses in structures subject to dynamic loads

Optimum structural design problems generally employ constraints which are parametric in terms of space and time variables. A parametric constraint may be replaced by equivalent critical point constraints at its local minima for optimization applications. In complex structures, accurate identification of such critical points is computationally expensive due to the cost of finite element analyses. Three techniques are described for efficiently and accurately identifying critical points for space- and time-dependent parametric constraints. An adaptive search technique and a spline interpolation technique are developed for exactly known response. A least squares spline approximation is suggested for noisy behavior. A helicopter tail-boom structure subjected to transient loading is used as an example to demonstrate the techniques described. All three techniques are shown to be computationally efficient for critical point identification and the least squares approximation also removes noise from the data. The case of multiple constraints per element is shown to be particularly suited to the use of spline techniques.

Haftka, R. T.↗
NASA NTRS1988

An exactly solvable model for calculating critical misfit and thickness in epitaxial superlattices - Layers of equal elastic constants and thicknesses

A parabolic interaction potential has been used to develop a model for calculating the misfit dislocation (MD) energy in the case of a superlattice of alternating layers of materials with equal elastic constants and thicknesses. The model, which is believed to be a good one for small misfits and to have some merit for covalent bonded materials, is exactly solvable for the critical thickness above which it is energetically favorable to lose coherency by the introduction of MDs into the interfaces. It was found, for a given misfit f, that the critical thickness for epitaxial superlattices free from their substrate is somewhat more than four times that for a single epilayer on a thick substrate. Furthermore, the critical thickness varies almost inversely with misfit to the power 1.22 when Poisson's ratio is 1/3. It was also shown that the critical misfit f(c) obtained by equating maximal misfit strain and MD energies is a significant overestimate of f(c). The results for a superlattice are compared with those of a thin layer on a thick substrate.

Van Der Merwe, Jan H.↗
NASA NTRS1990

Effects of grain size and grain boundary on critical current density of high T(sub c) superconducting oxides

By means of adding impurity elements in high T sub c oxides, the effects were studied of grain size and grain boundary on the critical current density of the following systems: YBa2Cu3O(7-y) and Bi-Pr-Sr-Ca-Cu-O. In order to only change the microstructure instead of the superconductivity of the grains in the samples, the impurity elements were added into the systems in terms of the methods like this: (1) substituting Y with the lanthanide except Pr, Ce, and Tb in YBa2Cu3O(7-y) system to finning down grains in the samples, therefore, the effect can be investigated of the grain size on the critical current density of 1:2:3 compounds; (2) mixing the high T sub c oxides with the metal elements, such as Ag, according to the composition of (high T sub c oxide)1-xAgx to metallize the grain boundaries in the samples, studying the effect of the electric conductivity of the grain boundaries on the critical current density; (3) adding SiO2, PbO2, and SnO2 into the high T sub c oxide to form impurity phases in the grain boundaries, trying to find out the effects of the impurity phases or metalloid grain boundaries on the critical current density of the high T sub c superconductors. The experimental results indicate that in the case of of the presence of the metalloid grain boundaries finning down grains fails to enhance the j sub c, but restrains it strongly, the granular high T sub c superconductors with the small size grains coupled weakly is always the low j sub c system.

Zhao, Y.↗
NASA NTRS1990

Critical speeding up in pure fluids

The extreme compressibility of a pure fluid near its critical point significantly affects its bulk dynamic response to temperature changes through adiabatic processes. Equations that describe the dynamics in the absence of gravity are developed, and the magnitude of the effect is illustrated with numerical solutions in one dimension. The results are remarkable: 5 mm of critical xenon, quenched from 20 to 10 mK above its critical temperature, cools by over 99 percent in less than 5 s. Moreover, adiabatic cooling is faster when the fluid is closer to the critical point.

Boukari, Hacene↗
NASA NTRS1990

Convective heat flow in space cryogenics plugs - Critical and moderate He II heat flux densities

Plug flow rates of entropy, heat and normal fluid in phase separators and in zero net mass flow systems are, to some extent, quite similar. A simplified analysis of critical conditions is presented in agreement with data trends. A critical temperature gradient arises on the basis of the He II two-fluid model at the stability limit constraining the thermohydrodynamics of the system. Thus, the question of critical thermodynamic fluctuations associated with nucleation versus the possibility of critical gradients in externally imposed parameters is answered in favor of the latter route toward turbulence. Furthermore, a similarity equation is presented which incorporates size dependent rates for moderate heat flow densities observed in experiments.

Yuan, S. W. K.↗
NASA NTRS1990

Critical exponent for the viscosity of carbon dioxide and xenon

The viscosities of carbon dioxide and xenon have been measured near their critical points and the critical exponent y characterizing the asymptotic divergence has been determined. Both fluids yielded exponents in the range y = 0.041 + or - 0.001 and thus also fell in the range y = 0.042 + or - 0.002 from an earlier study of four binary liquids. This agreement between experiments is the first evidence that pure fluids and binary liquids are in the same dynamic universality class. A recent theoretical value for y is 0.032. The 30 percent discrepancy is much greater than the combined errors from experiment and theory. The torsion oscillator viscometer operated at low frequency and low shear rate to avoid systematic errors caused by critical slowing down. Far from T(c) the analysis accounted for the crossover from critical to noncritical temperature dependence, where the latter was obtained from previously published correlations. Corrections for gravitational stratification were included close to T(c).

Berg, R. F.↗
NASA NTRS1992

The Critical Point Facility (CPF)

The Critical Point Facility (CPF) is an ESA multiuser facility designed for microgravity research onboard Spacelab. It has been conceived and built to offer investigators opportunities to conduct research on critical point phenomena in microgravity. This facility provides the high precision and stability temperature standards required in this field of research. It has been primarily designed for the purpose of optical investigations of transparent fluids. During a Spacelab mission, the CPF automatically processes several thermostats sequentially, each thermostat corresponding to an experiment. The CPF is now integrated in Spacelab at Kennedy Space Center, in preparation for the International Microgravity Lab. mission. The CPF was designed to submit transparent fluids to an adequate, user defined thermal scenario, and to monitor their behavior by using thermal and optical means. Because they are strongly affected by gravity, a good understanding of critical phenomena in fluids can only be gained in low gravity conditions. Fluids at the critical point become compressed under their own weight. The role played by gravity in the formation of interfaces between distinct phases is not clearly understood.

Source record↗
NASA NTRS1992

Critical fluid thermal equilibration experiment (19-IML-1)

Gravity sometimes blocks all experimental techniques of making a desired measurement. Any pure fluid possesses a liquid-vapor critical point. It is defined by a temperature, pressure, and density state in thermodynamics. The critical issue that this experiment attempts to understand is the time it takes for a sample to reach temperature and density equilibrium as the critical point is approached; is it infinity due to mass and thermal diffusion, or do pressure waves speed up energy transport while mass is still under diffusion control. The objectives are to observe: (1) large phase domain homogenization without and with stirring; (2) time evolution of heat and mass after temperature step is applied to a one phase equilibrium sample; (3) phase evolution and configuration upon going two phase from a one phase equilibrium state; (4) effects of stirring on a low g two phase configuration; (5) two phase to one phase healing dynamics starting from a two phase low g configuration; and (6) effects of shuttle acceleration events on spatially and temporally varying compressible critical fluid dynamics.

Wilkinson, R. Allen↗