Results for “controlled environment” — Page 9

NASA NTRS2012

Data Distribution System (DDS) and Solar Dynamic Observatory Ground Station (SDOGS) Integration Manager

The DDS SDOGS Integration Manager (DSIM) provides translation between native control and status formats for systems within DDS and SDOGS, and the ASIST (Advanced Spacecraft Integration and System Test) control environment in the SDO MOC (Solar Dynamics Observatory Mission Operations Center). This system was created in response for a need to centralize remote monitor and control of SDO Ground Station equipments using ASIST control environment in SDO MOC, and to have configurable table definition for equipment. It provides translation of status and monitoring information from the native systems into ASIST-readable format to display on pages in the MOC. The manager is lightweight, user friendly, and efficient. It allows data trending, correlation, and storing. It allows using ASIST as common interface for remote monitor and control of heterogeneous equipments. It also provides failover capability to back up machines.

Pham, Kim↗

NASA NTRS1984

Toward a lunar base

A research program leading to the development of a design for a permanent manned lunar base is described. Attention is given to the advantages offered by the lunar environment for materials processing and scientific investigations, due to the absence of an atmosphere and the plentiful supply of certain materials (iron and titanium). It is shown that once a controlled environment capsule is placed on the lunar surface, work could begin toward the construction of a permanent facility using lunar materials. It is pointed out that the research effort required for the design of a lunar base could perform concurrently with the R&D for the Space Station, resulting in the emplacement of a controlled environment capsule by the year 2007.

Duke, M. B.↗

NASA NTRS2000

Wheat response to differences in water and nutritional status between zeoponic and hydroponic growth systems

Hydroponic culture has traditionally been used for controlled environment life support systems (CELSS) because the optimal environment for roots supports high growth rates. Recent developments in zeoponic substrate and microporous tube irrigation (ZPT) also offer high control of the root environment. This study compared the effect of differences in water and nutrient status of ZPT or hydroponic culture on growth and yield of wheat (Triticum aestivum L. cv. USU-Apogee). In a side-by-side test in a controlled environment, wheat was grown in ZPT and recirculating hydroponics to maturity. Water use by plants grown in both culture systems peaked at 15 to 20 L m-2 d-1 up to Day 40, after which it declined more rapidly for plants grown in ZPT culture due to earlier senescence of leaves. No consistent differences in water status were noted between plants grown in the two culture systems. Although yield was similar, harvest index was 28% lower for plants grown in ZPT than in hydroponic culture. Sterile green tillers made up 12 and 0% of the biomass of plants grown in ZPT and hydroponic culture, respectively. Differences in biomass partitioning were attributed primarily to NH4-N nutrition of plants grown in ZPT compared with NO3-N in hydroponic nutrient solution. It is probable that NH4-N-induced Ca deficiency produced excess tillering and lower harvest index for plants grown in ZPT culture. These results suggest that further refinements in zeoponic substrate would make ZPT culture a viable alternative for achieving high productivity in a CELSS.

NASA Center JSC↗

NASA NTRS1998

Charging of Single Micron Sized Dust Grains by Secondary Electron Emission: A Laboratory Study

We present the details of a new laboratory study whose objective is to experimentally study the interaction of micron sized particles with plasmas and electromagnetic radiation. Specifically, to investigate under what conditions and to what extent do particles of various compositions and sizes become charged, or discharged, while exposed to an electron beam and ultraviolet radiation environment The emphasis is the study of the two charging mechanisms, secondary emission of electrons and photoelectric effect. The experiment uses a technique known as electrodynamic suspension of particles. With this technique, a single charged particle is electrodynamically levitated and then exposed to a controlled environment. Its charge to mass ratio is directly measured. Viscous drag measurements and the light scattering measurements characterize its size and optical characteristics. The environment to which the particle is expose may consist of room temperature and pressure or a rarefied atmosphere where only one major gaseous constituent is present, or, as in this case, a vacuum environment under electron bombardment or UV radiation . In addition, the environment can be cycled as part of the experiment. Therefore, using this technique, a single particle can be repeatedly exposed to a controlled environment and its response measured, or a single particle can be exposed to similar environments with minor differences and its response measured as a function of only the changed environmental conditions.

Spann, James F., Jr.↗

NASA NTRS1991

A fiber-optic probe for particle sizing in concentrated suspensions

A fiber-optic probe employing two monomode optical fibers, one for transmitting a Gaussian laser beam to the scattering volume and the second, positioned at some backscatter angle, for receiving the scattered light is described. Performance and suitability of the system for a process control environment is assessed by studying a suspension of polystyrene latex particles over a wide range of sizes and concentrations. The results show that the probe is ideal for a process control environment in industrial and laboratory applications. Particle size is recovered, without any additional corrections for multiple light scattering, in concentrations containing up to 10 percent solids of 39-nm polystyrene latex spheres.

Dhadwal, Harbans S.↗

NASA NTRS2017

Plants for Human Life Support and Space Exploration

The concept of using plants and algae for human life support in space goes back to testing in the 1950s and 1960. The basis for this is harnessing photosynthesis to generate oxygen, remove and fix carbon dioxide, and produce food. For several decades, NASA conducted studies with crops in controlled environments to assess their requirements for optimum growth. This includes tests with wheat, soybeans, potatoes, lettuce, tomatoes, and other crops. In many ways, these studies have paralleled growing interests in controlled environment agriculture on Earth. For example, NASA operated perhaps the first working example of a vertical agriculture facility in the late 1980s. The facility used recirculating hydroponic systems to conserve water and nutrients, with multiple growing shelves and light banks. NASA also pioneered the use LED lighting for growing plants. Findings from these tests suggest that an area of 20-25 sq m of crops could provide all the O2 for one human, and about 40-50 sq m could provide all the O2 and food. But this is dependent on the amount of light provided. Most of these studies targeted surface settings like habitats on Mars or the Moon. Growing plants in weightless settings, like the International Space Station (ISS) requires different approaches to contain and deliver water to plants, but lettuce, mizuna, pea, and other crops have been grown in small chambers aboard the ISS to provide supplemental fresh food for the astronauts.

Plants↗

NASA NTRS1981

Modeling the human controller in environments that include continuous and discrete tasks

In complex environments where the human operator is a supervisor, he must allocate his attention between different kinds of tasks for satisfactory overall performance. When a portion of the future reference trajectory for a continuous control task is available for preview, scheduling various other discrete activities is possible. A model has been developed for this situation using dynamic programming to solve an optimal control problem. An experiment was conducted where subjects controlled an airplane symbol over a map, shown a fixed distance into the future. Discrete tasks were introduced as data entry tasks. Results showed that the model compared favorably with experimental results.

Govindaraj, T.↗

NASA NTRS2010

Voice Over Internet Protocol (VoIP) in a Control Center Environment

The technology of transmitting voice over data networks has been available for over 10 years. Mass market VoIP services for consumers to make and receive standard telephone calls over broadband Internet networks have grown in the last 5 years. While operational costs are less with VoIP implementations as opposed to time division multiplexing (TDM) based voice switches, is it still advantageous to convert a mission control center s voice system to this newer technology? Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) has converted its mission voice services to a commercial product that utilizes VoIP technology. Results from this testing, design, and installation have shown unique considerations that must be addressed before user operations. There are many factors to consider for a control center voice design. Technology advantages and disadvantages were investigated as they refer to cost. There were integration concerns which could lead to complex failure scenarios but simpler integration for the mission infrastructure. MSFC HOSC will benefit from this voice conversion with less product replacement cost, less operations cost and a more integrated mission services environment.

Calvelage, Steven↗

NASA NTRS2010

Voice Over Internet Protocol (VoIP) in a Control Center Environment

The technology of transmitting voice over data networks has been available for over 10 years. Mass market VoIP services for consumers to make and receive standard telephone calls over broadband Internet networks have grown in the last 5 years. While operational costs are less with VoIP implementations as opposed to time division multiplexing (TDM) based voice switches, is it still advantageous to convert a mission control center s voice system to this newer technology? Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) has converted its mission voice services to a commercial product that utilizes VoIP technology. Results from this testing, design, and installation have shown unique considerations that must be addressed before user operations. There are many factors to consider for a control center voice design. Technology advantages and disadvantages were investigated as they refer to cost. There were integration concerns which could lead to complex failure scenarios but simpler integration for the mission infrastructure. MSFC HOSC will benefit from this voice conversion with less product replacement cost, less operations cost and a more integrated mission services environment.

Pirani, Joseph↗

NASA NTRSDate not supplied

KSC to EDEN ISS: Outredgeous Lettuce Growth on the Passive Porous Tube Nutrient Delivery System (PPTNDS)

EDEN ISS is a controlled environment greenhouse established near the Neumayer Station III in Antarcticawith the mission to enable fresh crop production for the crew who are working in this remote location. EDEN provides a space to conduct plant biology and related research in a unique and isolated controlled environment (CE), while providing a platform to test developing methods relevant to long duration manned space missions. In 2021, Kennedy Space Center (KSC) scientist Jess Bunchek fulfilled a one-year mission at EDEN. During that time a variety of fresh crops were grown to record horticultural and microbiological data as well as provide the crew with fresh food to eat. One method for crop growth included an experimental irrigation system called the Passive Porous Tube Nutrient Delivery System (PPTNDS) which was developed at KSC as a microgravity-capable plant irrigation system designed to support Space Plant Biology investigations and/or crop growth during space missions. The PPTNDS was employed to grow Outredgeous Lettuce (OL) during two growouts at EDEN, (harvesting at Day After Planting (DAP) 61 and 63) and two growouts at KSC where plant growth and micro sample data were captured. This paper presents the data collected from the PPTNDS and compares it to growth on a Nutrient Film Technique (NFT) hydroponic system operated in the same environment. The result shows a system that grows OL at a reduced rate compared to the NFT system but uses less water and crew interaction to operate.

Jacob Torres↗

NASA NTRS1994

Regulation of assimilate partitioning by daylength and spectral quality

The effects of daylength and spectral quality on assimilate partitioning and leaf carbohydrate content should be considered when conducting controlled environment experiments or comparing results between studies obtained under different lighting conditions. Changes in partitioning may indicate alterations to photoregulatory processes within the source leaf rather than disruptions in sink strength. Moreover, it may be possible to use photoregulatory responses of assimilate partitioning to probe mechanisms of growth and development involving translocation of carbon or adaptation to environmental factors such as elevated CO2. It may also be possible to steer assimilate partitioning for the benefit of controlled environment agriculture using energy-efficient manipulations such as daylength extensions with dim irradiances, end-of-day alterations in light quality, or shifting plants between different spectral qualities as a part of phasic control of growth and development. Note that high starch levels measured on a one-time basis provide little information, since it is the proportion of photosynthate stored as starch that is meaningful. Large differences in starch content can result from small changes in partitioning integrated over several days. Rate information is required.

Britz, Steve J.↗

NASA NTRS1994

The Electronic Documentation Project in the NASA mission control center environment

NASA's space programs like many other technical programs of its magnitude is supported by a large volume of technical documents. These documents are not only diverse but also abundant. Management, maintenance, and retrieval of these documents is a challenging problem by itself; but, relating and cross-referencing this wealth of information when it is all on a medium of paper is an even greater challenge. The Electronic Documentation Project (EDP) is to provide an electronic system capable of developing, distributing and controlling changes for crew/ground controller procedures and related documents. There are two primary motives for the solution. The first motive is to reduce the cost of maintaining the current paper based method of operations by replacing paper documents with electronic information storage and retrieval. And, the other is to improve the efficiency and provide enhanced flexibility in document usage. Initially, the current paper based system will be faithfully reproduced in an electronic format to be used in the document viewing system. In addition, this metaphor will have hypertext extensions. Hypertext features support basic functions such as full text searches, key word searches, data retrieval, and traversal between nodes of information as well as speeding up the data access rate. They enable related but separate documents to have relationships, and allow the user to explore information naturally through non-linear link traversals. The basic operational requirements of the document viewing system are to: provide an electronic corollary to the current method of paper based document usage; supplement and ultimately replace paper-based documents; maintain focused toward control center operations such as Flight Data File, Flight Rules and Console Handbook viewing; and be available NASA wide.

Wang, Lui↗

NASA NTRS1994

Light emitting diodes as a plant lighting source

Electroluminescence in solid materials is defined as the generation of light by the passage of an electric current through a body of solid material under an applied electric field. A specific type of electroluminescence, first noted in 1923, involves the generation of photons when electrons are passed through a p-n junction of certain solid materials (junction of a n-type semiconductor, an electron donor, and a p-type semiconductor, an electron acceptor). The development of this light emitting semiconductor technology dates back less than 30 years. During this period of time, the LED has evolved from a rare and expensive light generating device to one of the most widely used electronic components. A number of LED characteristics are of considerable importance in selecting a light source for plant lighting in a controlled environment facility. Of particular importance is the characteristic that light is generated by an LED at a rate far greater than the corresponding thermal radiation predicted by the bulk temperature of the device as defined by Plank's radiation law. This is in sharp contrast to other light sources, such as an incandescent or high intensity discharge lamp. A plant lighting system for controlled environments must provide plants with an adequate flux of photosynthetically active radiation, plus providing photons in the spectral regions that are involved in the photomorphogenic and phototropic responses that result in normal plant growth and development. Use of light sources that emit photons over a broad spectral range generally meet these two lighting requirements. Since the LED's emit over specific spectral regions, they must be carefully selected so that the levels of photsynthetically active and photomorphogenic and phototropic radiation meet these plant requirements.

Bula, R. J.↗

NASA NTRS1997

Selection and Characterization of Vegetable Crop Cultivars for use in Advanced Life Support Systems

Cultivar evaluation for controlled environments is a lengthy and multifaceted activity. The chapters of this thesis cover eight steps preparatory to yield trials, and the final step of cultivar selection after data are collected. The steps are as follows: 1. Examination of the literature on the crop and crop cultivars to assess the state of knowledge. 2. Selection of standard cultivars with which to explore crop response to major growth factors and determine set points for screening and, later, production. 3. Determination of practical growing techniques for the crop in controlled environments. 4. Design of experiments for determination of crop responses to the major growth factors, with particular emphasis on photoperiod, daily light integral and air temperature. 5. Developing a way of measuring yield appropriate to the crop type by sampling through the harvest period and calculating a productivity function. 6. Narrowing down the pool of cultivars and breeding lines according to a set of criteria and breeding history. 7. Determination of environmental set points for cultivar evaluation through calculating production cost as a function of set points and size of target facility. 8. Design of screening and yield trial experiments emphasizing efficient use of space. 9. Final evaluation of cultivars after data collection, in terms of production cost and value to the consumer. For each of the steps, relevant issues are addressed. In selecting standards to determine set points for screening, set points that optimize cost of production for the standards may not be applicable to all cultivars. Production of uniform and equivalent- sized seedlings is considered as a means of countering possible differences in seed vigor. Issues of spacing and re-spacing are also discussed.

Langhans, Robert W.↗

NASA NTRSDate not supplied

Testing Specialized Fertigation Blends for Agronomic Biofortification for Spaceflight Applications

The current spaceflight diet is prepackaged and vitamins degrade over time. Plants grown in the Veggie and APH units on the ISS currently provide the astronauts with a hefty dose of vitamins and minerals, but some nutrients could be improved. Agronomic Biofortifcation of crops with fertilizers has been tested on Earth, with the successful addition of minerals and vitamin C to crops that have otherwise been deficient. We intend to test if we can replicate this in a controlled environment and expand it to nutrients that are not often present in abundance in plants. This will be done by adding fluid nutrient blends to the water supply of candidate crops for spaceflight applications. We hypothesize that fertilization of plants with nutrients that are of value to human health will have neutral to positive effect on plants, with desired nutrients present in greater abundance in treated plants than untreated plants. We intend to show this through germination percent and pace, yield of edible biomass, the growth rate, and overall development of the crop plant. For this experiment, radish microgreens were grown on mats in a controlled environment chamber in enriched CO2, with LED lighting similar to what is found in the ISS Veggie hardware. Watering was conducted once at planting with a specialized blend of ½ strength Hoagland’s hydroponic solution with additional vitamins. Preliminary results show no decrease in overall biomass production with plants grown using additional vitamin D, but additional nutrients will be tested. Future direction will be to perform nutritional analysis of plants. Test that resulting produce will be suitable for human consumption, including meeting or exceeding food safety guidelines and palatability.

Christina M Johnson↗

NASA NTRSDate not supplied

Testing Specialized Fertigation Blends for Agronomic Biofortification for Spaceflight Applications

The current spaceflight diet is prepackaged and vitamins degrade over time. Plants grown in the Veggie and APH units on the ISS currently provide the astronauts with a hefty dose of vitamins and minerals, but some nutrients could be improved. Agronomic Biofortifcation of crops with fertilizers has been tested on Earth, with the successful addition of minerals and vitamin C to crops that have otherwise been deficient. We intend to test if we can replicate this in a controlled environment and expand it to nutrients that are not often present in abundance in plants. This will be done by adding fluid nutrient blends to the water supply of candidate crops for spaceflight applications. We hypothesize that fertilization of plants with nutrients that are of value to human health will have neutral to positive effect on plants, with desired nutrients present in greater abundance in treated plants than untreated plants. We intend to show this through germination percent and pace, yield of edible biomass, the growth rate, and overall development of the crop plant. For this experiment, radish microgreens were grown on mats in a controlled environment chamber in enriched CO2, with LED lighting similar to what is found in the ISS Veggie hardware. Watering was conducted once at planting with a specialized blend of ½ strength Hoagland’s hydroponic solution with additional vitamins. Preliminary results show no decrease in overall biomass production with plants grown using additional vitamin D, but additional nutrients will be tested. Future direction will be to perform nutritional analysis of plants. Test that resulting produce will be suitable for human consumption, including meeting or exceeding food safety guidelines and palatability.

microgreens↗

NASA NTRS2023

Orion Cabin Lighting System: Filter Workaround for Maintaining Crew Circadian Entrainment

Introduction: Suboptimal crew circadian entrainment (CCE) is common and results in cumulative fatigue and reduced cognitive function. This may promote use of psychostimulants and hypnotics. The Orion Cabin Lighting System (OCLS) consists of 15 dimmable lamps circuited to several zones. The OCLS monochromatic white lamp design is insufficient for maintaining CCE. While blue light (480-nm) elicits peak wake-cycle response, it is a powerful disruptor of CCE. We propose OCLS lamp filters (OLFs) as a workaround for maintaining CCE. Methods: Preliminary OLFs testing utilized a tunable-white LED to serve as a baseline lamp in the NASA Lighting Lab’s controlled environment (prototype OCLS lamps were unavailable). Illuminance and spectral irradiances were measured with the NASA Lighting Lab’s spectroradiometer. ConOps is proposed for OLFs. Results: OLFs markedly attenuated 480-nm light and illumination with minimal mass/volume requirements. ConOps includes in-flight deployment of OLFs and reducing OCLS lamp intensity prior to bedtime. Pros: minimal mass/volume, no added power, and a simplistic design. Cons: manual twice-daily articulation of OLFs, undetermined frangibility/flammability/off-gassing and effects on thermal regulation, and untested task illumination or color fidelity in the Orion cabin. Discussion: While OLFs aptly attenuate 480-nm light from our tunable LED lamp in the Lighting Lab’s controlled environment, they remain untested within the Orion cabin on OCLS lamps. Future tests include Orion cabin illumination optimization for appropriate Lux delivery and ensuring task/color fidelity with OLFs deployed. Adequate OCLS cooling should be similarly assessed. Other safety testing includes OLF frangibility/flammability/off-gassing in an enriched-O 2 /hypobaric environment. Together, these data will demonstrate OLFs provide a viable workaround for maintaining CCE further ensuring mission safety and success.

Carlos Rene Dostal↗

NASA NTRS2010

Cold Stowage Flight Systems

The International Space Station (ISS) provides a test bed for researchers to perform science experiments in a variety of fields, including human research, life sciences, and space medicine. Many of the experiments being conducted today require science samples to be stored and transported in a temperature controlled environment. NASA provides several systems which aide researchers in preserving their science. On orbit systems provided by NASA include the Minus Eighty Laboratory freezer for ISS (MELFI), Microgravity Experiment Research Locker Incubator (MERLIN), and Glacier. These freezers use different technologies to provide rapid cooling and cold stowage at different temperature levels on board ISS. Systems available to researchers during transportation to and from ISS are MERLIN, Glacier, and Coldbag. Coldbag is a passive cold stowage system that uses phase change materials. Details of these current technologies will be provided along with operational experience gained to date. With shuttle retirement looming, NASA has protected the capability to provide a temperature controlled environment during transportation to and from the ISS with the use of Glacier and Coldbags, which are compatible with future commercial vehicles including SpaceX's Dragon Capsule, and Orbital s Cygnus vehicle. This paper will discuss the capability of the current cold stowage hardware and how it may continue to support NASA s mission on ISS and in future exploration missions.

Campana, Sharon↗