Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “control structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Experimental Quantification of Spin–Phonon Coupling in Molecular Qubits Using Inelastic Neutron Scattering

Electronic spin superposition states enable nanoscale sensing through their sensitivity to the local environment, yet their sensitivity to vibrational motion also limits their coherence times. In molecular spin systems, chemical tunability and atomicscale resolution are accompanied by a dense, thermally accessible phonon spectrum that introduces efficient spin relaxation pathways. Despite extensive theoretical work, there is little experimental consensus on which vibrational energies dominate spin relaxation or how molecular structure controls spin−phonon coupling (SPC). We present a fully experimental method to quantify SPC coefficients by combining temperature-dependent vibrational spectra from inelastic neutron scattering with spin relaxation rates measured by electron paramagnetic resonance. We apply this framework to two model S = 1/2 systems, copper(II) phthalocyanine (CuPc) and copper(II) octaethylporphyrin (CuOEP). Two distinct relaxation regimes emerge: below 40 K, weakly coupled lattice modes below 50 cm −1 dominate, whereas above 40 K, optical phonons above ∼185 cm −1 become thermally populated and drive relaxation with SPC coefficients nearly 3 orders of magnitude larger. Structural distortions in CuOEP that break planar symmetry soften the crystal lattice and enhance anharmonic scattering but also raise the energy of stretching modes at the molecular core where the spins reside. This redistributes vibrational energy toward the molecular periphery and out of plane, ultimately reducing SPC relative to CuPc and enabling room-temperature spin coherence in CuOEP. Although our method does not provide mode-specific SPC coefficients, it quantifies contributions from distinct spectral regions and establishes a broadly applicable, fully experimental link between crystal structure, lattice dynamics, and spin relaxation.

Lohaus, Stefan H. [California Institute of Technol↗

Determinants of photochemical characteristics of the photosynthetic electron transport chain of maize

The photosynthetic electron transport chain (ETC) is the bridge that links energy harvesting during the photophysical reactions at one end and energy consumption during the biochemical reactions at the other. Its functioning is thus fundamental for the proper balance between energy supply and demand in photosynthesis. Currently, there is a lack of understanding regarding how the structural properties of the ETC are affected by nutrient availability and plant developmental stages, which is a major roadblock to comprehensive modeling of photosynthesis. Redox parameters reflect the structural controls of ETC on the photochemical reactions and electron transport. We conducted joint measurements of chlorophyll fluorescence (ChlF) and gas exchange under systematically varying environmental conditions and growth stages of maize and sampled foliar nutrient contents. We utilized the recently developed steady-state photochemical model to infer redox parameters of electron transport from these measurements. We found that the inferred values of these photochemical redox parameters varied with leaf macronutrient content. These variations may be caused either directly by these nutrients being components of protein complexes on the ETC or indirectly by their impacts on the structural integrity of the thylakoid and feedback from the biochemical reactions. Also, the redox parameters varied with plant morphology and developmental stage, reflecting seasonal changes in the structural properties of the ETC. Our findings will facilitate the parameterization and simulation of complete models of photosynthesis.

59 BASIC BIOLOGICAL SCIENCES↗

Zr‐Porphyrin Metal–Organic Framework as nanoreactor for boosting the formation of hydrogen clathrates

Abstract We report the first experimental evidence for rapid formation of hydrogen clathrates under mild pressure and temperature conditions within the cavities of a zirconium‐metalloporphyrin framework, specifically PCN‐222. PCN‐222 has been selected for its 1D mesoporous channels, high water‐stability, and proper hydrophilic behavior. Firstly, we optimize a microwave (MW)‐assisted method for the synthesis of nanosized PCN‐222 particles with precise structure control (exceptional homogeneity in morphology and crystalline phase purity), taking advantage of MW in terms of rapid/homogeneous heating, time and energy savings, as well as potential scalability of the synthetic method. Second, we explore the relevance of the large mesoporous 1D open channels within the PCN‐222 to promote the nucleation and growth of confined hydrogen clathrates. Experimental results show that PCN‐222 drives the nucleation process at a lower pressure than the bulk system (1.35 kbar vs 2 kbar), with fast kinetics (minutes), using pure water, and with a nearly complete water‐to‐hydrate conversion. Unfortunately, PCN‐222 cannot withstand these high pressures, which lead to a significant alteration of the mesoporous structure while the microporous network remains mainly unchanged.

Carrillo‐Carrión, Carolina↗

Zr‐Porphyrin Metal–Organic Framework as nanoreactor for boosting the formation of hydrogen clathrates

Abstract We report the first experimental evidence for rapid formation of hydrogen clathrates under mild pressure and temperature conditions within the cavities of a zirconium‐metalloporphyrin framework, specifically PCN‐222. PCN‐222 has been selected for its 1D mesoporous channels, high water‐stability, and proper hydrophilic behavior. Firstly, we optimize a microwave (MW)‐assisted method for the synthesis of nanosized PCN‐222 particles with precise structure control (exceptional homogeneity in morphology and crystalline phase purity), taking advantage of MW in terms of rapid/homogeneous heating, time and energy savings, as well as potential scalability of the synthetic method. Second, we explore the relevance of the large mesoporous 1D open channels within the PCN‐222 to promote the nucleation and growth of confined hydrogen clathrates. Experimental results show that PCN‐222 drives the nucleation process at a lower pressure than the bulk system (1.35 kbar vs 2 kbar), with fast kinetics (minutes), using pure water, and with a nearly complete water‐to‐hydrate conversion. Unfortunately, PCN‐222 cannot withstand these high pressures, which lead to a significant alteration of the mesoporous structure while the microporous network remains mainly unchanged.

Carrillo‐Carrión, Carolina↗

Accurate Consensus-based Distributed Averaging with Variable Time Delay in Support of Distributed Secondary Control Algorithms

We report that distributed secondary control has been widely used in hierarchical control structures, where multiple distributed generators (DGs) need to coordinate to regulate system voltage and frequency. In these systems, consensus algorithms determine the average of a group of dynamic states (e.g. voltages measured by a group of DGs). To be useful, consensus algorithms must be computationally efficient, stable and accurate. In practice, numerous practical implementation challenges significantly affect the consensus equilibrium. In this paper, we quantify the accuracy deviations of the distributed average observer algorithms proposed in the literature to demonstrate the problems with the state-of-the-art distributed averaging techniques. A novel approach is proposed that achieves accurate average tracking in the presence of time-varying communication delays among agents. In our implementation, time synchronization of all distributed controllers is enabled by a novel software platform, called Resilient Information Architecture Platform for the Smart Grid (RIAPS). The proposed distributed average observer is implemented on hardware controllers and its effectiveness is validated in a controller hardware-in-the-loop testbed.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A new era in ferroelectrics

Topological structures in ferroic materials have drawn great interest in recent years due to the richness of the underlying physics and the potential for applications in next generation electronics. Recent advances in atomically precise thin-film materials synthesis and characterization of structural/physical phenomena at unprecedented length/energy/time scales have enabled us to study exotic phases and their associated physics [Rößler et al., Nature 442, 797 (2006); S. Das, Nature 568, 368 (2019); Yadav et al., Nature 530, 198 (2016); and Stoica et al., Nat. Mater. 18, 377 (2019)]. It is appropriate that, in the second century of ferroelectrics, some dramatic discoveries are propelling the field into directions heretofore unimaginable. In this review, we explore the recent progress in ferroelectric-oxide superlattices in which researchers can control structure and physical properties through the application of epitaxial strain, layer thickness, temperature, electric field, etc. We provide a discussion of exotic topological structures (e.g., closure domains, vortices, polar skyrmions, and other exotic phases) and associated functionalities in ferroelectric/paraelectric superlattices. We conclude with a brief overview of and prospects for how the field may evolve in the coming years.

36 MATERIALS SCIENCE↗

Differentiating Ligand Tailoring and Cation Incorporation as Strategies for Tuning Heterobimetallic Cerium Complexes

Tuning of redox-active complexes featuring metals with high coordination numbers by incorporation of secondary redox-inactive cations has received far less attention than it deserves. Here, appending moderate steric bulk to a tripodal ligand framework has been tested for its influence on secondary-cation-driven structural and electrochemical tuning of cerium, a lanthanide that tends to adopt high coordination numbers. A quasi -C 3 -symmetric cerium(III) complex denoted [Ce] has been prepared that features pendant benzyloxy groups, and this work demonstrates that this species offers a site capable of binding single Na + or Ca 2+ ions. Electrochemical and UV-visible spectroscopic studies reveal equilibrium binding affinity of [Ce] for Na + in acetonitrile solvent, contrasting with tight binding of all cations in all other previously studied systems of this type. The modulated cation binding can be attributed to the bulky benzyloxy groups, which impact the thermodynamics of cation binding but do not impede the formation of cerium centers with coordination number 8 upon binding of either Na + or Ca2 + . Finally, the Ce(IV/III) reduction potential was found to be tunable under the equilibrium binding conditions, highlighting the potentially significant role that controlled structural changes can play in modulating the solution properties of heterobimetallic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Delineating the Impact of Diluent on High-Concentration Electrolytes for Developing High-Voltage LiNi 0.5 Mn 1.5 O 4 Spinel Cathode

LiNi 0.5 Mn 1.5 O 4 (LNMO) is a high-voltage spinel cathode with low nickel content, making it an attractive candidate for next-generation lithium-ion batteries (LIBs). However, its application is limited by interfacial instability with conventional carbonate-based electrolytes at high voltages. In this work, a localized saturated electrolyte (LSE) capable of stably operating up to 4.85 V is investigated. Molecular dynamics simulations and Fourier transform infrared spectroscopy reveal that adding “non-solvating” 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether diluent in the saturated electrolyte, more PF 6 − anions are present in the first solvation shell of Li + , at the expense of solvent molecules. This tailored solvation environment promotes the formation of a robust, LiF-rich cathode-electrolyte interphase that mitigates transition metal dissolution and parasitic side reactions. The optimized LSE enables excellent cycling performance, with 95% capacity retention in Li|LNMO half-cells after 100 cycles and 94% retention in Li 4 Ti 5 O 12 |LNMO full cells after 250 cycles, even at a practically relevant LNMO cathode loading of ≈15 mg cm −2 . In conclusion, these results highlight the benefits of electrolyte engineering and solvation structure control in advancing high-voltage LIB technologies.

LNMO cathode↗

Size dependent lattice pseudosymmetry for frustrated decahedral nanoparticles

Geometric frustration—where geometry prevents simultaneous satisfaction of local interactions—generates pseudosymmetry and emergent behaviors across physical and biological systems. At the nanoscale, pseudosymmetric features in crystalline materials manifest as local strain and distortion, but how they depend on particle size and control structural stability remains unclear. Here, we report the first study of a size-dependent crossover in pseudosymmetry in multi-twinned gold nanoparticles (NPs), combining four-dimensional scanning transmission electron microscopy with nanoscale strain mapping grounded in continuum solid mechanics. Analysis of more than 20 decahedral NPs (20–55 nm) reveals pronounced heterogeneity in multiple modes of in-plane strain and displacement field in small NPs as five tetrahedral grains close the geometric gap, without extended defects. With increasing particle size, strain fields homogenize across grains and local phases shift from predominantly low-symmetry body-centered tetragonal motifs at small sizes to face-centered cubic character approaching the bulk limit. We identify a crossover particle size of ~35 nm, well below bulk, correlating with a transition from modified-Wulff shapes to pentagonal bipyramids, consistent with finite element predictions. This quantitative framework for mapping size-dependent strain and pseudosymmetry enables precise design and control of functional crystalline solids and phase transformation for catalysis, photonics, electronics, and energy storage.

Lin, Oliver [University of Illinois at Urbana-Cham↗

Highly Conjugated Porphyrin Arrays Enable Optical Resolution of Ferromagnetic and Antiferromagnetic Aligned States of the Triplet Exciton and an Incorporated Stable Radical

Well-defined photogenerated molecular spin systems have potential utility in spintronics and quantum information science (QIS). Because molecular magnetic, optical, and electronic properties can be controlled by design, diverse spin systems can be prepared at modest temperatures. Photogenerated molecular spin systems often involve states prepared from the interaction of excitons and charges. Resolving the nature of electron spin alignment in photogenerated spin states described by the coupling of a triplet exciton and a stable radical commonly relies on EPR spectroscopy. Here, we describe ethyne-bridged (porphinato)metal ( PM n ) oligomers that incorporate a macrocycle-bound Cu(II) radical center. Upon photoexcitation of such PM n arrays, a singdoublet ( 2 S 1 ) state is formed; ultrafast internal conversion (IC) then produces a tripdoublet ( 2 T 1 ) state, which undergoes intersystem crossing (ISC) to produce a tripquartet ( 4 T 1 ) state, before relaxation to the ground state ( 2 S 0 ). These highly conjugated Cu(II) radical-containing PMn arrays enable direct observation of copper porphyrin 2 T 1 → 4 T 1 ISC dynamics from the biexponential decay of the near-infrared (NIR) 2,4 T 1 → 2,4 T n transient absorption manifold. Multireference n-electron valence perturbation theory (NEVPT2) computations illuminate how PM n electronic structure controls the relaxation dynamics of these long-lived (>10 ns) electronically excited multiplet states. These studies show that highly conjugated and polarizable porphyrin arrays incorporating stable spin centers provide rare π-delocalized systems where the ferromagnetic and antiferromagnetic alignment between a triplet exciton and a stable radical are both spectrally resolved and addressable using transient optical spectroscopy at wavelengths exceeding 1 μm, providing new opportunities to QIS.

14 SOLAR ENERGY↗

Bottom-up Assembly of Nanoporous Graphene with Emergent Electronic States

The incorporation of nanoscale pores into a sheet of graphene allows it to switch from an impermeable semimetal to a semiconducting nanosieve. Nanoporous graphenes are desirable for applications ranging from high-performance semiconductor device channels to atomically thin molecular sieve membranes, and their performance is highly dependent on the periodicity and reproducibility of pores at the atomic level. Achieving precise nanopore topologies in graphene using top-down lithographic approaches has proven to be challenging due to poor structural control at the atomic level. Alternatively, atomically precise nanometer-sized pores can be fabricated via lateral fusion of bottom-up synthesized graphene nanoribbons. This technique, however, typically requires an additional high temperature cross-coupling step following the nanoribbon formation that inherently yields poor lateral conjugation, resulting in 2D materials that are weakly connected both mechanically and electronically. Here, we demonstrate a novel bottom-up approach for forming fully conjugated nanoporous graphene through a single, mild annealing step following the initial polymer formation. We find emergent interface-localized electronic states within the bulk band gap of the graphene nanoribbon that hybridize to yield a dispersive two-dimensional low-energy band of states. We show that this low-energy band can be rationalized in terms of edge states of the constituent single-strand nanoribbons. The localization of these 2D states around pores makes this material particularly attractive for applications requiring electronically sensitive molecular sieves.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Directed Synthesis of Gold Nanoparticle Superstructures Using Self-Assembling Peptoids Containing Metal-Bonding N-Heterocyclic Carbenes

N-Heterocyclic carbene (NHC) ligands, with strong metal-binding affinity, offer a robust platform for constructing organic–inorganic nanohybrids with high stability and tunable properties. However, achieving precise structural control in a simple manner remains challenging. Here, we report a one-pot synthesis of nanohybrids using self-assembling peptoids functionalized with histidine-2-ylidene, which simultaneously enable peptoid assembly and NHC–metal binding. Histidine-2-ylidene-functionalized peptoids were designed to self-assemble and provide NHC binding sites, while AuNPs served as the inorganic component due to NHCs’ strong affinity for gold surfaces. The resulting peptoid-NHC@AuNPs form well-defined vesicles that are characterized by UV–vis spectroscopy, X-ray photoelectron spectroscopy, and electron microscopy. Importantly, the vesicle size and morphology can be tuned via the peptoid sequence or environmental conditions. Further experiments highlight the crucial role of the NHC sites in the formation and stabilization of these nanohybrids. This modular strategy offers a versatile route to fabricating functional NHC-based nanohybrids for potential applications in sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Dopant-Induced Ordering Enhances the Thermoelectric Properties of a Polythiophene-Based Block Copolymer

Conjugated polymer-based block copolymers (CP-BCPs) are an unexplored class of materials for organic thermoelectrics. In this study, the authors report on the electronic conductivity (σ) and Seebeck coefficient (α) of a newly synthesized CP-BCP, poly(3-hexylthiophene)-block-poly (oligo-oxyethylene methacrylate) (P3HT-b-POEM), upon solution co-processing with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and subsequently vapor-doping with a molecular dopant, 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). It is found that the addition of the hydrophilic block POEM greatly enhances the processability of P3HT, enabling homogeneous solution-mixing with LiTFSI. Notably, interactions between P3HT-b-POEM with ionic species significantly improve molecular order and unexpectedly cause electrical oxidizing doping of P3HT block both in solution and solid-states, a phenomenon that has not been previously observed in Li-salt containing P3HT. Vapor doping of P3HT-b-POEM-LiTFSI thin films with F4TCNQ further enhances σ and yields a thermoelectric power factor PF = α 2 σ of 13.0 μW m -1 K -2 , which is more than 20 times higher than salt-free P3HT-b-POEM sample. Through modeling thermoelectric behaviors of P3HT-b-POEM with the Kang-Snyder transport model, the improvement in PF is attributed to higher electronic charge mobility originating from the enhanced molecular ordering of P3HT. The results demonstrate that solution co-processing CP-BCPs with a salt is a powerful method to control structure and performance of organic thermoelectric materials.

36 MATERIALS SCIENCE↗

Electrostatic Superlattices Beyond 1:1 Stoichiometry

ABSTRACT Exotic nanoparticle superstructures can be accessed by harnessing nanoparticle softness and charge regulation, features often viewed as obstacles to structural control. Here, we show that regulated charge mismatch in polymer‐grafted nanoparticles enables the assembly of high‐stoichiometry cubic superlattices. By co‐tuning grafting density, particle size, and bulk composition, we realize ionic‐lattice analogues, such as and , as well as single‐component and superlattices without atomic counterparts. The superlattice has recently been identified theoretically as a photonic band‐gap lattice. These phases emerge from a 1:1 “parent” lattice when local charge neutrality cannot be satisfied, driving either progressive interstitial filling or reorganization into a larger basis. For instance, the systematic occupation of ZnS tetrahedral sites yields , while ligand‐swapping symmetry breaking converts CsCl into . Upon heating, the assemblies exhibit reversible lattice contraction and pronounced negative thermal expansion. Furthermore, the energetic penalty for defects increases with nanoparticle size, facilitating the scalable production of high‐quality, open superlattices for photonic applications.

36 MATERIALS SCIENCE↗

Defect Chemistry in High‐Voltage Cathode Materials for Lithium‐Ion Batteries

High-voltage cathodes (HVCs) have emerged as a paramount role for the next-generation high-energy-density lithium-ion batteries (LIBs). However, the pursuit of HVCs comes with inherent challenges related to defective structures, which significantly impact the electrochemical performance of LIBs. The current obstacle lies in the lack of a comprehensive understanding of defects and their precise effects. This perspective aims to provide insights into defect chemistry for governing HVCs. The classifications, formation mechanisms, and evolution of defects are outlined to explore the intricate relationship between defects and electrochemical behavior. The pressing need for cutting-edge characterization techniques that comprehensively investigate defects across various temporal and spatial scales is emphasized. Building on these fundamental understandings, engineering strategies such as composition tailoring, morphology design, interface modification, and structural control to mitigate or utilize defects are thoroughly discussed for enhanced HVCs performance. Furthermore, these insights are expected to provide vital guidelines for developing high-performance HVCs for next-generation high-energy lithium-ion batteries.

cross-scale characterization↗

Nanoscale Mapping and Defect-Assisted Manipulation of Surface Plasmon Resonances in 2D Bi 2 Te 3 /Sb 2 Te 3 In-Plane Heterostructures

Here, the Bi 2 Te 3 /Sb 2 Te 3 in-plane heterostructure is reported as a low-dimensional tunable chalcogenide well suited as plasmonic building block for the visible-UV spectral range. Electron-driven plasmon excitations of low-dimensional Bi 2 Te 3 /Sb 2 Te 3 are investigated by monochromated electron energy loss spectroscopy spectrum imaging. To resolve the nanoscale spatial distribution of various local plasmonic resonances, singular value decomposition is used to disentangle the spectral data and identify the individual spectral contributions of various corner, edge, and face modes. Furthermore, defect-plasmon interactions are investigated both for nanoscale intrinsic and thermally induced extrinsic polygonal defects (in situ sublimation). Signature of defect-induced red shift ranging from a several hundreds of millielectronvolts to a few electronvolts, broadening of various plasmon response, together with selective enhancement and significant variations in their intensity are detected. This study highlights the presence of a heterointerface and identifies defects as physical tuning pathways to modulate the plasmonic response over a broad spectral range. Finally, the experimental observations are compared qualitatively and validated with numerical simulations using the electron-driven discrete dipole approximation. Low-dimensional Bi 2 Te 3 /Sb 2 Te 3 as a less explored plasmonic system holds great promises as emerging platform for integrated plasmonics. Furthermore, introducing controlled structural defects can open the door for nanoengineering of plasmonic properties in such systems.

36 MATERIALS SCIENCE↗

Enhancement of Magneto‐Mechanical Actuation of Micropillar Arrays by Anisotropic Stress Distribution

Abstract Magnetically active shape‐reconfigurable microarrays undergo programmed actuation according to the arrangement of magnetic dipoles within the structures, achieving complex twisting and bending deformations. Cylindrical micropillars have been widely used to date, whose circular cross‐sections lead to identical actuation regardless of the actuating direction. In this study, micropillars with triangular or rectangular cross‐sections are designed and fabricated to introduce preferential actuation directions and explore the limits of their actuation. Using such structures, controlled liquid wetting is demonstrated on micropillar surfaces. Liquid droplets pinned on magnetic micropillar arrays undergo directional spreading when the pillars are actuated as depinning of the droplets is enabled only in certain directions. The enhanced deformation due to direction dependent magneto‐mechanical actuation suggests that micropillar arrays can be fundamentally tailored to possess application specific responses and opens up opportunities to exploit more complex designs such as micropillars with polygonal cross sections. Such tunable wetting of liquids on microarray surfaces has potential to improve printing technologies via contactless reconfiguration of stamp geometry by magnetic field manipulation.

Park, Jeong Eun↗