Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compressible flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Transverse injection into Mach 2 flow behind a rearward-facing step - A 3-D, compressible flow test case for hypersonic combustor CFD validation

A spatially-complete data set of the important primitive flow variables is presented for the complex, nonreacting, 3D unit combustor flow field employing transverse injection into a Mach 2 flow behind a rearward-facing step. A unique wind tunnel facility providing the capability for iodine seeding was built specifically for these measurements. Two optical techniques based on laser-induced-iodine fluorescence were developed and utilized for nonintrusive, in situ flow field measurements. LDA provided both mean and fluctuating velocity component measurements. A thermographic phosphor wall temperature measurement technique was developed and employed. Data from the 2D flow over a rearward-facing step and the complex 3D mixing flow with injection are reported.

Mcdaniel, James C.↗
NASA NTRS1938

Compressible flow about symmetrical Joukowski profiles

The method of Poggi is employed for the determination of the effects of compressibility upon the flow past an obstacle. A general expression for the velocity increment due to compressibility is obtained. The general result holds whatever the shape of the obstacle; but, in order to obtain the complete solution, it is necessary to know a certain Fourier expansion of the square of the velocity of flow past the obstacle. An application is made to the case flow of a symmetrical Joukowski profile with a sharp trailing edge, fixed in a stream of an arbitrary angle of attack and with the circulation determined by the Kutta condition. The results are obtained in a closed form and are exact insofar as the second approximation to the compressible flow is concerned, the first approximation being the result for the corresponding incompressible flow. Formulas for lift and moment analogous to the Blasius formulas in incompressible flow are developed and are applied to thin symmetrical Joukowski profiles for small angles of attack.

Kaplan, Carl↗
NASA NTRS1973

Unsteady subsonic compressible flow around finite thickness wings.

A general formulation for the unsteady subsonic compressible potential flow around aircraft having arbitrary configurations is presented. An integral representation of the velocity potential is obtained. From this a linear integral equation relating the perturbation potential and its normal derivative (which is known from the boundary conditions) is derived. For the numerical solution of the integral equation, the surface of the aircraft is divided into small elements and the potential is assumed to be constant within each element. Numerical results are obtained for an oscillating finite-thickness wing and indicate good convergence and excellent agreement with existing lifting surface solutions.

Morino, L.↗
NASA NTRS1990

Simple explicit upwind schemes for solving compressible flows

Several upwind numerical methods for solving the compressible inviscid and viscous flow equations are discussed. Due to their explicit nature, the schemes are very simple and easy to apply to solutions on multi-block structured grids. Their favorable high frequence damping results in good rates of convergence when combined with multigrid procedures. The schemes are optimized using a simple stability and damping factor analysis. Results for three-dimensional test cases are shown and discussed. Attention is payed to the relative efficiencies of these schemes.

Von Lavante, E.↗
NASA NTRS1986

Interferometer for Observing Compressible Flow

Moving pictures show changing flow-field contours. Optical interferometer enables instantaneous visualization of compressible fluid flows. Relatively immune to vibration, unit suited to observation of flows over models in large wind tunnels. In improved point-diffraction interferometer, reference beam generated by pinhole (point) diffraction at place in object beam outside experimental volume. Object under test positioned so interior or supporting stand lies in shadows of turning mirrors.

Bacnalo, W.↗
NASA NTRS1975

Compressible flow computer program for gas film seals

Computer program, AREAX, calculates properties of compressible fluid flow with friction and area change. Program carries out quasi-one-dimensional flow analysis which is valid for laminar and turbulent flows under both subsonic and choked flow conditions. Program was written to be applied to gas film seals.

Zuk, J.↗
NASA NTRS1972

Quasi-one-dimensional compressible flow across face seals and narrow slots. 1: Analysis

An analysis is presented for compressible fluid flow across shaft face seals and narrow slots. The analysis includes fluid inertia, viscous friction, and entrance losses. Subsonic and choked flow conditions can be predicted and analyzed. The model is valid for both laminar and turbulent flows. Results agree with experiment and with solutions which are more limited in applicability. Results show that a parallel film can have a positive film stiffness under choked flow conditions.

Zuk, J.↗
NASA NTRS1983

An analysis of the two-dimensional acoustic field in a nonuniform duct carrying compressible flow

An analytical/numerical linear acoustic solution in a nonuniform two-dimensional duct carrying a compressible mean flow is developed. A quasi-one dimensional mean flow model is employed together with a consistent expression for the cross-flow velocity. The acoustic solution is obtained using the Wave Envelope Method. Numerical results are compared with those of an existing Wave Envelope solution which includes a more general mean flow model. In addition, the singular behavior of the solutions derived in the current work for nearly sonic flow conditions is examined explicitly.

Uenishi, K.↗
NASA NTRS1987

Multigrid acceleration of the isenthalpic form of the compressible flow equations

A numerical method for solving the isenthalpic form of the governing equations for compressible inviscid flows was developed. The method is based on the concept of flux vector splitting in its implicit form and was tested on several demanding configurations. Time marching to steady state was accelerated by the implementation of the multigrid procedure which very effectively increased the rate of convergence. High quality steady-state results were obtained for various test cases and required only short computational times due to the relative efficiency of the basic method.

Melson, N. Duane↗
NASA NTRS1987

Multigrid acceleration of the isenthalpic form of the compressible flow equations

A numerical method for solving the isenthalpic form of the governing equations for compressible inviscid flows was developed. The method is based on the concept of flux vector splitting in its implicit form and was tested on several demanding configurations. Time marching to steady state was accelerated by the implementation of the multigrid procedure which very effectively increased the rate of convergence. High quality steady-state results were obtained for various test cases and required only short computational times due to the relative efficiency of the basic method.

Melson, N. Duane↗
NASA NTRS1972

Quasi-one-dimensional compressible flow across face seals and narrow slots. 2: Computer program

A computer program is presented for compressible fluid flow with friction across face seals and through narrow slots. The computer program carries out a quasi-one-dimensional flow analysis which is valid for laminar and turbulent flows under both subsonic and choked flow conditions for parallel surfaces. The program is written in FORTRAN IV. The input and output variables are in either the International System of Units (SI) or the U.S. customary system.

Zuk, J.↗
NASA NTRS1974

Computer program for quasi-one-dimensional compressible flow with area change and friction - Application to gas film seals

A computer program is presented for compressible fluid flow with friction and area change. The program carries out a quasi-one-dimensional flow analysis which is valid for laminar and turbulent flows under both subsonic and choked flow conditions. The program was written to be applied to gas film seals. The area-change analysis should prove useful for choked flow conditions with small mean thickness, as well as for face seals where radial area change is significant. The program is written in FORTRAN 4.

Zuk, J.↗
NASA NTRS1950

Two-dimensional compressible flow in centrifugal compressors with straight blades

Six numerical examples are presented for steady, two-dimensional, compressible, nonviscous flow in centrifugal compressors with thin straight blades, the center lines of which generate the surface of a right circular cone when rotated about the axis of the compressor. A seventh example is presented for incompressible flow. The solutions were obtained in a region of the compressors, including the impeller tip, that was considered to be unaffected by the diffuser vanes or by the impeller-inlet configuration. Each solution applies to radial and mixed flow compressors with various cone angles but with the same angle between blades on the conic flow surface. The solution also apply to radial and mixed flow turbines with the rotation and the flow direction reversed. The effects of variations in the following parameters were investigated: (1) flow rate, (2) impeller-tip speed, (3) variation of passage height with radius, and (4) angle between blades on conic flow surface. The numerical results are presented in plots of the streamlines and constant Mach number lines. Correlation equations are developed whereby the flow conditions in any impeller with straight blades can be determined (in the region investigated by this analysis) for all operating conditions.

Stanitz, John D↗
NASA NTRS1989

A locally implicit finite element analysis algorithm for 3-D compressible flows

The paper outlines the research results on the development of a finite-element analysis procedure for three-dimensional compressible viscous flows. Some new algorithmic features of the computational model, such as a locally implicit solution scheme which avoids the necessity of computation and assembly of global matrices. The new algorithm makes it applicable to large-scale three-dimensional flow problems of practical interest, for example, the analysis of flows in Space Shuttle Main Engine (SSME).

Reddy, K. C.↗
DOE OSTI2021

A moving discontinuous Galerkin finite element method with interface condition enforcement for compressible flows

A variation of moving discontinuous Galerkin finite element method with interface condition enforcement (MDG-ICE) is developed for solving the compressible Euler equations. The MDG-ICE method, originating from the work of Corrigan et al. [1], [2], [3], [4], is based on the space-time DG formulation, where both flow field and grid geometry are considered as independent variables and the conservation laws are enforced both on discrete elements and element interfaces. The element conservation laws are solved in the standard discontinuous solution space to determine conservative quantities, while the interface conservation is enforced using a variational formulation in a continuous space to determine discrete grid geometry. The resulting over-determined system of nonlinear equations arising from the MDG-ICE formulation can then be solved in a least-squares sense, leading to an unconstrained nonlinear least-squares problem that is regularized and solved by Levenberg-Marquardt method. A number of numerical experiments for both 1D unsteady and 2D steady state compressible flow problems are conducted to assess the accuracy and robustness of the MDG-ICE method. Numerical results obtained indicate that the MDG-ICE method is able to implicitly detect and track all types of discontinuities via interface conservation enforcement and satisfy the conservation law on both elements and interfaces via grid movement and grid management, demonstrating that an exponential rate of convergence for Sod and Lax-Harden shock tube problems can be achieved and highly accurate solutions without overheating to both double-rarefaction wave and Noh problems can be obtained.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1986

Viscous compressible flow direct and inverse computation and illustrations

An algorithm for laminar and turbulent viscous compressible two dimensional flows is presented. For the application of precise boundary conditions over an arbitrary body surface, a body-fitted coordinate system is used in the physical plane. A thin-layer approximation of tne Navier-Stokes equations is introduced to keep the viscous terms relatively simple. The flow field computation is performed in the transformed plane. A factorized, implicit scheme is used to facilitate the computation. Sample calculations, for Couette flow, developing pipe flow, an isolated airflow, two dimensional compressor cascade flow, and segmental compressor blade design are presented. To a certain extent, the effective use of the direct solver depends on the user's skill in setting up the gridwork, the time step size and the choice of the artificial viscosity. The design feature of the algorithm, an iterative scheme to correct geometry for a specified surface pressure distribution, works well for subsonic flows. A more elaborate correction scheme is required in treating transonic flows where local shock waves may be involved.

Yang, T. T.↗