Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “composites dislocations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Constituent properties, process, and formulation effects contributing to functional characteristics in pharmaceutical and explosive composites [Slides]

Crystal properties and defects contribute substantially to basic properties. Dip-coated films display a number of properties which are expected to be present in wet agglomeration / real formulation. Nanoindentation provides more detailed information about static dislocations and a useful simulation of real deformation processes during formulation of pressed composites. Continuum measurements are limited in what can be mechanistically determined, but we are on the verge of breakthroughs in dynamic in situ experiments!

36 MATERIALS SCIENCE↗

Crystal structure, energetics, and phase stability of strengthening precipitates in Mg alloys: A first-principles study

Magnesium alloys have attracted increasing interest due to their potential use as light-weight structural materials but their application is limited by their low strength compared to conventional alloys. Age hardening is commonly employed to form strengthening precipitates in such alloys, which impedes the motion of dislocations, and leads to improved strength. However, the exact composition, crystal structure, and energetics of many of these strengthening precipitates are either unknown or not clearly resolved, making the precise engineering and design of such alloys difficult. Toward this end, we use first-principles density functional theory calculations to elucidate the crystal structures and energetics of a very large set of precipitates in magnesium alloys. For cases where the precipitate crystal structure is not known, we comprehensively search over decorations of many prototype structures, including hcp superstructures, and in addition, perform global structural optimization using the Minima Hopping Method to predict suitable crystal structures. For all the strengthening precipitates, we calculate the formation energies, construct the respective zero temperature convex hulls, and analyze their stabilities. Here, we show that the bulk formation energies per solute atom (essentially, the solute chemical potentials) decrease along the observed sequences of precipitation, validating our calculations in Mg-{Nd, Gd, Y, Y-Nd, Nd-Zn, Gd-Zn, Y-Zn, Al, Zn, Sn, Al-Ca, Ca-Zn} alloy systems. In addition, we construct a monolayer model for the Guinier-Preston zones (GP zones) observed in the Mg-Nd-Zn system during early stages of age hardening, and thereby explain the formation of the γ" (Mg 5 (Nd,Zn)) phase from the GP zones, as observed in experiments.

36 MATERIALS SCIENCE↗

Performance Study of Virtual Frisch Grid CdZnTeSe Detectors

Nuclear detectors for x-ray and gamma-ray spectroscopy and imaging are a vital tool in many homeland security, medical imaging, astrophysics and other applications. Most of these applications require room-temperature operation due to the operational constraints imposed by a cryogenic cooling system. CdZnTe (CZT) has been the main material with the desired detection properties, and CZT crystals have been used commercially for three decades. However, CdZnTe still suffers from long-standing issues of high densities of performance-limiting intrinsic defects such as Te inclusions and networks of dislocation walls (sub-grain boundaries). A recently invented new quaternary material CdZnTeSe showed excellent material properties for radiation detection. The material was found to be free from dislocation networks, possess reduced Te inclusions, and have better compositional homogeneity. Virtual Frisch grid detectors were fabricated from crystals taken from a CdZnTeSe ingot that was grown by the traveling heater method. The detectors were fabricated from an as-grown ingot, bypassing the post-growth annealing process commonly practiced for industrial-grade CZT. The performances of the detectors were studied with different Frisch grid lengths using an amplifier shaping time ranging from 1–6 µs. The detectors showed high-quality spectroscopic performance with an as-measured energy resolution of ~1.1% at 662 keV for an optimum Frisch grid length of 3 mm. The charge collection was observed to enhance for longer Frisch grids.

47 OTHER INSTRUMENTATION↗

Structure and Voltage Recovery Driven by Defects Elimination in Li-Rich Layered Oxide Cathode Materials

Lithium-ion batteries (LIBs) are ubiquitous in a wide range of technologies, including cell phones, electric vehicles, and energy grid, and are indispensable in the transition toward sustainable energy technology. The battery performance is inherently connected to the capability of lithium ions to reversibly intercalate with the electrodes. The capacity of classical layered transition metal (TM) oxides, the primary commercial cathode materials, is limited to cationic redox activity. Anionic redox has thus emerged as a new paradigm for designing novel cathodes for next generation LIBs. It is recently confirmed oxygen redox in lithium-rich layered oxides (LRLO) with composition xLi 2 MnO 3 ∙(1-x)LiTMO 2 , which enables this group of materials exhibit reversible capacities exceeding 280 mAh g -1 . Unfortunately, this material undergoes voltage fading and instability that is rooted in irreversible structural transformation in terms of defects formation including lithium and oxygen vacancies, lithium tetrahedron, TM migration, edge dislocations, stacking fault, and local strain. Modification methods including morphology control, composition gradient, surface treatment, foreign elements doping, etc., have been proposed in the literatures to mitigate the defects formation and maintain the structure reversibility. Despite their improvement, the intrinsic voltage fading is still inevitable and remains a challenge that will require considerable effort to overcome. In this work, we demonstrate a path to recover the layer structure and working voltage through high-temperature annealing. The treatment at high temperature recovers the local Li-excess environments around oxygen, oxygen stacking sequence, and eliminates microstrain associated with different defects. As a result, the voltage profile once more shows plateau region during charge and the average discharge voltage is restored of the cycled cathode after heat treatment. Both theoretical calculations and experimental characterizations illustrate the mechanisms underlying the heating induced recovery. The structure metastability and defects removal are decisive in structure and voltage recovery of LRLO cathode material.

Zhang, Minghao↗

Structure of Diamond-Silicoin Carbide Nanocomposites as a Function of Sintering Temperature at 8 GPa

Nanosize diamond-silicon carbide composites have been sintered at high temperatures and a fixed pressure of about 8 GPa. Crystallite size, densities of stacking faults and dislocations in diamond and silicon carbide crystallites are determined by X-ray diffraction profile analysis. It has been shown that crystallite sizes increase while population of stacking faults and dislocations decrease with temperature increasing from 1820 C to 2320 C. These conclusions indicate that to produce composites with small residual stresses the sintering process should be conducted at the highest possible temperatures.

36 MATERIALS SCIENCE↗

P/M aluminum metal matrix composites

Development of lightweight, high specific stiffness engineered materials has been the long term goal of many investigators. Recently, this quest has focused on discontinuously reinforced aluminum metal matrix composites. This paper reviews the fabrication of powder metallurgy discontinuously reinforced metal matrix composites. Emphasis is given to the differences in heat treatment response reported between unreinforced and reinforced powder metallurgy materials. It is proposed that these observations can be rationalized by considering the effects of pre-existing heterogeneous nucleation sites, i.e., the dislocation substructure developed during rapid cooling of discontinuously reinforced aluminum metal matrix composites, on precipitation in reinforced aluminum alloys.

Rack, H. J.↗

An in situ ambient and cryogenic transmission electron microscopy study of the effects of temperature on dislocation behavior in CrCoNi-based high-entropy alloys with low stacking-fault energy

Temperature is known to affect deformation mechanisms in metallic alloys. As temperature decreases, the stacking-fault energy in many face-centered cubic (fcc) alloys decreases, resulting in a change of deformation mode from dislocation slip to deformation twinning. Such an impact of temperature can be more complex in compositionally heterogeneous microstructures that exhibit, for example, local concentration fluctuation such as that in multi-principal element alloys. In this work, we compare the dislocation behavior and mechanical properties of a fcc Cr 20 Mn 10 Fe 30 Co 30 Ni 10 high-entropy alloy at ambient and liquid-nitrogen temperatures. We find that a network of stacking faults is formed by uniformly extended dislocations at ambient temperatures with low stacking-fault energy, whereas at lower temperatures, uneven dissociation of dislocations becomes significant, which results in severe dislocation pile-ups together with their pronounced entanglement. Our findings indicate that as the stacking-fault energy decreases with decreasing temperature, the heterogeneity of the distribution of elements becomes more dominant in tuning the local variation of lattice resistance. As a result, the change in dislocation behavior at low temperatures strongly affects microstructural evolution and consequently leads to significantly more pronounced work hardening.

36 MATERIALS SCIENCE↗

Synthesis and characterization of aluminium–alumina micro- and nano-composites by spark plasma sintering

Graphical abstract: The evolution of microstructure by varying the particle size of reinforcement in the matrix employing spark plasma sintering has been demonstrated here in Al–Al{sub 2}O{sub 3} system. An emphasis has been laid on varying the reinforcement particle size and evaluating the microstructural morphologies and their implications on mechanical performance of the composites. Nanocomposites of 0.5, 1, 3, 5, 7 volume % alumina (average size < 50 nm) reinforced in aluminium matrix were fabricated by powder metallurgy route using spark plasma sintering technique technique at a temperature of 773 K and pressure of 50 MPa. Another set of specimens having composition 1, 5, 20 vol.% of alumina (average size ∼ 10 μm) had been fabricated to compare the physical as well as mechanical attributes of the microcomposite as well as the nanocomposites. These micro- and nano-composites have been characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy followed by density, microhardness and nanoindentation measurements. The alumina nanoparticles revealed an interface showing appreciable physical intimacy with the aluminium matrix compared to that of the alumina microparticles. The interfacial integrity in case of nanocomposites is better than in the microcomposite which has been studied using microscopic techniques. Spark plasma sintering imparts enhanced densification as well as matrix-reinforcement proximity which has been corroborated with the experimental results. - Highlights: • The Al–Al{sub 2}O{sub 3} micro- and nano-composites fabricated by spark plasma sintering. • Better matrix-reinforcement integrity in nanocomposites than microcomposites. • Spark plasma sintering method results in higher density and hardness values. • High density and hardness values of nanocomposites than microcomposites. • High dislocation density in spark plasma sintered Al–Al{sub 2}O{sub 3} composites. - Abstract: In the present study, an emphasis has been laid on evaluation of the microstructural morphologies and their implications on mechanical performance of the composites by varying the reinforcement particle size. Nanocomposites of 0.5, 1, 3, 5, 7 volume % alumina (average size < 50 nm) and microcomposites of 1, 5, 20 volume % of alumina (average size ∼ 10 μm) reinforced in aluminium matrix were fabricated by spark plasma sintering technique at a temperature of 773 K and pressure of 50 MPa. These micro- and nano-composites have been characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy followed by density, microhardness and nanoindentation hardness measurements. The alumina nanoparticles revealed appreciable physical intimacy with the aluminium matrix than that of alumina microparticles. The highest nanohardness recorded 0.85 GPa and 99% densification for 7 and 1 vol.% Al–Al{sub 2}O{sub 3} nancomposites respectively. Spark plasma sintering imparts enhanced densification and matrix-reinforcement proximity which have been corroborated with the experimental results.

36 MATERIALS SCIENCE↗

Dislocation nucleation facilitated by atomic segregation

Surface segregation—the enrichment of one element at the surface, relative to the bulk—is ubiquitous to multi-component materials. Using the example of a Cu–Au solid solution, we demonstrate that compositional variations induced by surface segregation are accompanied by misfit strain and the formation of dislocations in the subsurface region via a surface di˙usion and trapping process. The resulting chemically ordered surface regions acts as an e˙ective barrier that inhibits subsequent dislocation annihilation at free surfaces. Using dynamic, atomic-scale resolution electron microscopy observations and theory modelling, we show that the dislocations are highly active, and we delineate the specific atomic-scale mechanisms associated with their nucleation, glide, climb, and annihilation at elevated temperatures. As a result, these observations provide mechanistic detail of how dislocations nucleate and migrate at heterointerfaces in dissimilar-material systems.

36 MATERIALS SCIENCE↗

Ni Nanoparticle-Added Ni{sub x}/(Cu{sub 0.5}Tl{sub 0.5})Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10-δ} Superconductor Composites and Their Enhanced Flux Pinning Characteristics

Ni nanoparticle-added Ni{sub x}/(Cu{sub 0.5}Tl{sub 0.5})Ba{sub 2}Ca{sub 2} Cu{sub 3}O{sub 10-δ} superconductor composites are synthesized at normal pressure by two-step solid-state reaction method. The idea for adding ferromagnetic nanoparticles was to create artificial pinning centers at grain boundaries. The samples have shown orthorhombic crystal structure in which the cell parameters increase with an increase in the added concentration of Ni nanoparticles. This shows that due to the higher reactivity, Ni nanoparticles partially diffuse into the unit cell of (Cu{sub 0.5}Tl{sub 0.5})Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10-δ} superconductors. This also indicates as an evidence of the occupancy of these nanoparticles at grain boundaries. A metallic variation of resistivity from room temperature down to the onset of superconductivity is a typical feature of these samples with T{sub c}(R = 0) varying between 92 and 94 K. The magnitude of diamagnetism is significantly enhanced in 7 and 10% nanoparticle-added samples. The enhanced magnetization of ferromagnetic nanoparticles at reduced temperature plays a vital role in reducing the diamagnetism of nanosuperconductor composites. The softening of apical oxygen modes of type Cu(1)–O{sub A}–Cu(2) has confirmed the diffusion of Ni nanoparticles into the unit cell of the final compound. The excess conductivity analyses of conductivity data have shown that the values of B{sub c}(0), B{sub c1}, and J{sub c} are enhanced with the addition of Ni nanoparticles in the final compound. Variation of superconducting properties was attributed to pair breaking due to spin scattering across these ferromagnetic Ni nanoparticles. This shows that added Ni nanoparticles act as efficient pinning centers, which is also confirmed by the suppression of the London penetration depth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Visualizing the Distribution of Water in Nominally Anhydrous Minerals at the Atomic Scale: Insights From Atom Probe Tomography on Fayalite

Olivine is an important reservoir for hydrogen in the Earth’s upper mantle, and the presence of OH in this nominally anhydrous mineral can play an important role in determining the physical properties of the host phase. Here we report on the 3-D distribution of the hydrated region at atomic scale in fayalite using atom probe tomography. Site-specific analysis reveals regions that are either compositionally homogenous or contain interlayers that are consistent with hydrated dislocations. Elemental distributions of the minor elements within the hydrated interlayers show enrichment of Na, indicating the formation of equilibrium environment is associated with Na geochemically, as well as depletion of Mn and Mg, the result of incompatibility of OH. This direct observation of hydrated region distribution in 3-D at the nanometer scale, can provide insight into the material properties of these nominally anhydrous minerals and possible rheology of upper mantle minerals and geodynamics.

58 GEOSCIENCES↗

Epitaxial growth of very large grain bicrystalline Cu(In,Ga)Se{sub 2} thin films by a hybrid sputtering method

Epitaxial bicrystals of Cu(In,Ga)Se{sub 2} (CIGS) have been grown and characterized spanning high angle incoherent grain boundaries. The grain boundaries in the CIGS were generally found to be fully dense, although voids were occasionally observed as is typical in CIGS polycrystals. There was no significant difference in composition of the grains across the boundary. No reduction in dislocation density near the grain boundary was found. X-ray diffraction results were consistent with partially strained epitaxial layers with domains tilted relative to the surface normal and with different rotations in the surface plane. The tetragonal symmetry of the unit cell appears to have affected the residual strain in the layers and the amount of misfit observed. The surface morphology was found to reflect trends observed in growth of single well-oriented crystals. Differences in surface potential of air-exposed grains showed a morphology-dependent work function. However, no significant potential difference was observed that was related to the grain boundary. Surface morphology effects were much greater. The surface showed a clear rotation of morphology across twin boundaries in the surface plane of one grain. The twin boundaries were also fully dense.

36 MATERIALS SCIENCE↗

High figure of merit extreme bandgap Al 0.87 Ga 0.13 N-Al 0.64 Ga 0.36 N heterostructures over bulk AlN substrates

We report on high-quality n -Al 0.87 Ga 0.13 N-A 0.64 Ga 0.36 N heterostructures over single crystal AlN. For these pseudomorphic heterostructures, high-resolution X-ray and X-ray Topographic analysis was used to establish a threading dislocation density of 7 × 10 3 cm -2 . Using reverse composition graded n + -Al x Ga 1- x N contact layers, we obtained linear ohmic contacts with 4.3 Ω mm specific resistance. A critical breakdown field >11 MV cm -1 was also measured. In combination with the channel resistance of 2400 Ω sq -1 , these translate to a Baliga’s Figure of Merit of 2.27 GW cm -2 . This, to the best of our knowledge is the highest reported value for extreme bandgap AlGaN heterostructures.

42 ENGINEERING↗

TEM Characterization of Neutron Irradiated HfAl3-Al Composite Specimens

Particles comprised of a thermal neutron absorbing material (HfAl3) are dispersed in a metal matrix material with high thermal conductivity (aluminum) to conduct the heat generated by neutron capture away from the fuel and materials. This metal matrix composite is very promising for use as a conduction-cooled neutron absorber and has the potential to be useful as a shroud or heat sink for testing advanced fast reactor fuels and materials in an existing thermal reactor. To design and optimize the absorber block system for advanced reactor designs, fundamental understanding of the irradiation effect on material properties is necessary. This dataset contains TEM characterization results of neutron irradiated HfAl3-Al composite specimens. It is focused on the irradiation induced defects (dislocation lines and loops) characterization using the on-zone axis bright field STEM technique. This data was collected using a FEI Tecnai G2 F30 S/TEM at the Microscopy and Characterization Suite (MaCS), Center for Advanced Energy Studies (CAES).

Guillen, Donna↗

TEM Characterization of Neutron Irradiated HfAl3-Al Composite Specimens

Particles comprised of a thermal neutron absorbing material (HfAl3) are dispersed in a metal matrix material with high thermal conductivity (aluminum) to conduct the heat generated by neutron capture away from the fuel and materials. This metal matrix composite is very promising for use as a conduction-cooled neutron absorber and has the potential to be useful as a shroud or heat sink for testing advanced fast reactor fuels and materials in an existing thermal reactor. To design and optimize the absorber block system for advanced reactor designs, fundamental understanding of the irradiation effect on material properties is necessary. This dataset contains TEM characterization results of neutron irradiated HfAl3-Al composite specimens. It is focused on the irradiation induced defects (dislocation lines and loops) characterization using the on-zone axis bright field STEM technique. This data was collected using a FEI Tecnai G2 F30 S/TEM at the Microscopy and Characterization Suite (MaCS), Center for Advanced Energy Studies (CAES).

Guillen, Donna↗

Characterization of precipitates in a niobium-zirconium-carbon alloy

A niobium alloy with 1 percent zirconium and 0.063 percent carbon by weight was investigated in the as-rolled and annealed conditions, and after high-temperature (1350 and 1400 K) exposure with and without an applied stress. In the as-rolled and annealed conditions, large metastable carbides were observed in addition to a regular distribution of small particles. During the high-temperature exposure, the majority of the large carbides were dissolved and a more stable carbide phase formed. This finely dispersed phase had a composition determined to be approximately 70 percent ZrC and approximately 30 percent NbC and showed some evidence of an orientation relationship with the matrix. The precipitates appeared to coarsen slightly after approximately 5000 hr exposure in the presence of an applied stress resulted in a decrease in the size and in the interparticle spacing of the stable precipitates. However, the composition of the precipitate phase and its ability to pin dislocations were not affected by the temperature or stress conditions.

Grobstein, T. L.↗

Models of Mass Transport During Microgravity Crystal Growth of Alloyed Semiconductors in a Magnetic Field

Alloyed semiconductor crystals, such as germanium-silicon (GeSi) and various II-VI alloyed crystals, are extremely important for optoelectronic devices. Currently, high-quality crystals of GeSi and of II-VI alloys can be grown by epitaxial processes, but the time required to grow a certain amount of single crystal is roughly 1,000 times longer than the time required for Bridgman growth from a melt. Recent rapid advances in optoelectronics have led to a great demand for more and larger crystals with fewer dislocations and other microdefects and with more uniform and controllable compositions. Currently, alloyed crystals grown by bulk methods have unacceptable levels of segregation in the composition of the crystal. Alloyed crystals are being grown by the Bridgman process in space in order to develop successful bulk-growth methods, with the hope that the technology will be equally successful on earth. Unfortunately some crystals grown in space still have unacceptable segregation, for example, due to residual accelerations. The application of a weak magnetic field during crystal growth in space may eliminate the undesirable segregation. Understanding and improving the bulk growth of alloyed semiconductors in microgravity is critically important. The purpose of this grant to to develop models of the unsteady species transport during the bulk growth of alloyed semiconductor crystals in the presence of a magnetic field in microgravity. The research supports experiments being conducted in the High Magnetic Field Solidification Facility at Marshall Space Flight Center (MSFC) and future experiments on the International Space Station.

Ma, Nancy↗