Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Cloud Properties Simulated by a Single-Column Model. Part II: Evaluation of Cumulus Detrainment and Ice-phase Microphysics Using a Cloud Resolving Model

This paper is the second in a series in which kilometer-scale-resolving observations from the Atmospheric Radiation Measurement program and a cloud-resolving model (CRM) are used to evaluate the single-column model (SCM) version of the National Centers for Environmental Prediction Global Forecast System model. Part I demonstrated that kilometer-scale cirrus properties simulated by the SCM significantly differ from the cloud radar observations while the CRM simulation reproduced most of the cirrus properties as revealed by the observations. The present study describes an evaluation, through a comparison with the CRM, of the SCM's representation of detrainment from deep cumulus and ice-phase microphysics in an effort to better understand the findings of Part I. It is found that detrainment occurs too infrequently at a single level at a time in the SCM, although the detrainment rate averaged over the entire simulation period is somewhat comparable to that of the CRM simulation. Relatively too much detrained ice is sublimated when first detrained. Snow falls over too deep of a layer due to the assumption that snow source and sink terms exactly balance within one time step in the SCM. These characteristics in the SCM parameterizations may explain many of the differences in the cirrus properties between the SCM and the observations (or between the SCM and the CRM). A possible improvement for the SCM consists of the inclusion of multiple cumulus cloud types as in the original Arakawa-Schubert scheme, prognostically determining the stratiform cloud fraction and snow mixing ratio. This would allow better representation of the detrainment from deep convection, better coupling of the volume of detrained air with cloud fraction, and better representation of snow field.

Luo, Yali↗

GCM Simulations of Cirrus Clouds and Cloud Feedbacks

Cirrus clouds are a particularly uncertain component of general circulation model (GCM simulations of long-term climate change for a variety of reasons: (1) They encompass a wide range of optical thicknesses and altitudes, from thin tropopause cirrus to thick anvil cirrus that descend to the freezing level, and thus can exert both positive and negative forcing and feedback on the climate; (2) The dynamical processes that create them are poorly resolved in climate GCMs and different in the tropics and midlatitudes; (3) Predictions of their formation and microphysical properties depend on the accuracy of dynamical transports of small concentrations of water vapor to and within the upper troposphere; (4) The relative humidity conditions at which they form depends on the nature and concentration of nucleating particles and is poorly understood; (5) They are more difficult to observe than other cloud types, and hence their parameterization is more loosely constrained by available data. We will illustrate the potential sensitivity of the perturbed climate to uncertainties in cirrus cloud formulation. We will also examine the processes that form cirrus in climate models and discuss the accuracy with which climate GCMs represent these processes. We will also discuss ways in which GCM grid-scale parameterizations might be derived from cloud-scale observations. Finally, we will emphasize the types of global observations needed to constrain parameterizations of cirrus in climate GCMs.

DelGenio, Anthony D.↗

A test of a cumulus parameterization model using the GATE data

Two parametric, ensemble cloud models were tested with data obtained during GATE (GARP Atlantic Tropical Experiment) (1974). The first model is an adaption of the Arakawa-Schubert scheme which uses an entraining jet to represent individual cumulus cloud types. The second model consists of an ensemble of cylindrical cells to represent the convective cloud field.

Rodenhuis, D.↗

Antarctica Cloud Cover for October 2003 from GLAS Satellite Lidar Profiling

Seeing clouds in polar regions has been a problem for the imagers used on satellites. Both clouds and snow and ice are white, which makes clouds over snow hard to see. And for thermal infrared imaging both the surface and the clouds cold. The Geoscience Laser Altimeter System (GLAS) launched in 2003 gives an entirely new way to see clouds from space. Pulses of laser light scatter from clouds giving a signal that is separated in time from the signal from the surface. The scattering from clouds is thus a sensitive and direct measure of the presence and height of clouds. The GLAS instrument orbits over Antarctica 16 times a day. All of the cloud observations for October 2003 were summarized and compared to the results from the MODIS imager for the same month. There are two basic cloud types that are observed, low stratus with tops below 3 km and high cirrus form clouds with cloud top altitude and thickness tending at 12 km and 1.3 km respectively. The average cloud cover varies from over 93 % for ocean and coastal regions to an average of 40% over the East Antarctic plateau and 60-90% over West Antarctica. When the GLAS monthly average cloud fractions are compared to the MODIS cloud fraction data product, differences in the amount of cloud cover are as much as 40% over the continent. The results will be used to improve the way clouds are detected from the imager observations. These measurements give a much improved understanding of distribution of clouds over Antarctica and may show how they are changing as a result of global warming.

Spinhirne, J. D.↗

Examination of Regional Trends in Low Level Cloud Properties Found in the Aqua-MODIS Satellite Record

Clouds have a pronounced influence on the Earth?s climate. Relative to cloud free conditions, they cool the planet by increasing the amount of solar radiation reflected back to space and reducing the amount of sunlight reaching the surface, but they warm the planet by decreasing the amount of thermal infrared radiation escaping to space and increasing the amount reaching the surface (a greenhouse effect). The global mean net cloud radiative effect (CRE) is about -20 W/m2, a cooling effect at both the top-ofatmosphere and surface. Given the magnitude of CRE?s, it is expected that changes in cloud properties could be a significant factor in climate change due to anthropogenic forcing?s, yet cloud feedbacks are not well known and remain one of the largest uncertainties in climate prediction. This paper explores relationships between coincident observations of atmospheric aerosols, clouds and radiation derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) and from the Clouds and the Earth?s Radiant Energy System (CERES) instruments on the Aqua satellite. We investigate several interesting regional trends that have emerged in the nearly 18-year satellite record that suggest correlation between changes in low-level cloud properties and changes in aerosol optical depth that may be associated with changes in pollution emissions and possibly with other factors. MERRA reanalysis of meteorological conditions and aerosol particulate species are investigated to help better understand the potential mechanisms responsible for the observed cloud property trends. Finally, we analyze a new CERES flux by cloud type dataset in order to try and isolate the associated trends in low-level cloud radiative effects. It is anticipated that this study using long-term observations of clouds, aerosols and radiative fluxes combined with model reanalysis data will contribute to an improved understanding of cloud climate feedbacks.

William L Smith Jr.↗

Micropulse Lidar Cloud Mask Machine-Learning Value-Added Product Report

Cloud detection algorithms of various techniques have been developed and applied to atmospheric ground-based lidar data to identify cloud boundaries and produce clouds masks. While these algorithms are able to identify a wide variety of cloud types and conditions, it is often observed that the algorithms can still fail to accurately detect clouds that are readily discernible when inspecting the lidar imagery. Based on this observation, an alternative approach for cloud detection is to take advantage of machine-learning capabilities and the trained human eye as an interpreter of lidar images, and in turn, to train a neural network to recognize the desired features in the lidar data.

54 ENVIRONMENTAL SCIENCES↗

The effect of clouds on the earth's radiation budget

The radiative fluxes from the Earth Radiation Budget Experiment (ERBE) and the cloud properties from the International Satellite Cloud Climatology Project (ISCCP) over Indonesia for the months of June and July of 1985 and 1986 were analyzed to determine the cloud sensitivity coefficients. The method involved a linear least squares regression between co-incident flux and cloud coverage measurements. The calculated slope is identified as the cloud sensitivity. It was found that the correlations between the total cloud fraction and radiation parameters were modest. However, correlations between cloud fraction and IR flux were improved by separating clouds by height. Likewise, correlations between the visible flux and cloud fractions were improved by distinguishing clouds based on optical depth. Calculating correlations between the net fluxes and either height or optical depth segregated cloud fractions were somewhat improved. When clouds were classified in terms of their height and optical depth, correlations among all the radiation components were improved. Mean cloud sensitivities based on the regression of radiative fluxes against height and optical depth separated cloud types are presented. Results are compared to a one-dimensional radiation model with a simple cloud parameterization scheme.

Ziskin, Daniel↗

Profiling of Atmospheric Water Vapor from the SSM/T-2 Radiometric Measurements

An advantage of using the millimeter-wave measurements for water vapor profiling is the ability to probe beyond a moderate cloud cover. Such a capability has been demonstrated from an airborne MIR (Millimeter-wave Imaging Radiometer) flight over the Pacific Ocean during an intense observation period of TOGA/COARE (Tropical Ocean Global Atmosphere/ Couple Ocean Atmospheric Response Experiment) in early 1993. A Cloud Lidar System (CLS) and MODIS Airborne Simulator (MAS) were on board the same aircraft to identify the presence of clouds and cloud type. The retrieval algorithm not only provides output of a water vapor profile, but also the cloud liquid water and approximate cloud altitude required to satisfy convergence of the retrieval. The validity of these cloud parameters has not been verified previously. In this document, these cloud parameters are compared with those derived from concurrent measurements from the CLS and AMPR (Advanced Microwave Precipitation Radiometer).

Wang, J. R.↗

Clouds Around the World: How a Simple Citizen Science Data Challenge Became a Worldwide Success

Citizen science is often recognized for its potential to directly engage the public in science, and is uniquely positioned to support and extend participants’ learning in science. In March 2018, the Global Learning and Observations to Benefit the Environment (GLOBE) Program, NASA’s largest and longest-lasting citizen science program about Earth, organized a month-long event that asked people around the world to contribute daily cloud observations and photographs of the sky (15 March–15 April 2018). What was considered a simple engagement activity turned into an unprecedented worldwide event that garnered major public interest and media recognition, collecting over 55,000 observations from 99 different countries, in more than 15,000 locations, on every continent including Antarctica. The event was called the “Spring Cloud Challenge” and was created to 1) engage the general public in the scientific process and promote the use of the GLOBE Observer app, 2) collect ground-based visual observations of varying cloud types during boreal spring, and 3) increase the number and locations of ground-based visual cloud observations collocated with cloud-observing satellites. The event resulted in roughly 3 times more observations than during the historic and highly publicized 2017 North American total solar eclipse. The dataset also includes observations over the Drake Passage in Antarctica and reports from intense Saharan dust events. This article describes how the challenge was crafted, outreach to volunteer scientists around the world, details of the data collected, and impact of the data.

GLOBE↗

Weak influence of anthropogenic emissions on aerosol, cloud, and rain in the wet season of the Amazon rainforest

Anthropogenic emissions have been shown to affect new particle formation, aerosol concentrations, and clouds. Such effects vary with region, environmental conditions, and cloud types. In the wet season of Amazonia, anthropogenic emissions emitted from Manaus, Brazil, can significantly increase the cloud condensation nuclei (CCN) concentrations compared to the background of mainly natural aerosols. However, the regional response of cloud and rain to anthropogenic emissions in Amazonia remains very uncertain. Here, we aim to quantify how aerosol concentration, cloud, and rain respond to changes in anthropogenic emissions through parameterized new particle formation and primary aerosol emission in the Manaus region and to understand the underlying mechanisms. We ran the atmosphere-only configuration of the HadGEM3 climate model with a nested regional domain that covers most of the rainforest region (720 km by 1200 km with 3 km resolution) under scaled regional emissions. The 7 d simulations show that, in the areas that are affected by anthropogenic emissions, when aerosol and precursor gas emissions are doubled from the baseline emission inventories, aerosol number concentrations increase by 13 %. The nucleation rate that involves sulfuric acid and biogenic compounds generally increases with pollution levels. However, nucleation is suppressed very close to the pollution source, resulting in lower nucleation and soluble Aitken mode aerosol number concentrations. We also found that doubling the anthropogenic emission can increase the cloud droplet number concentrations ( N d ) by 9 %, but cloud water and rain mass mixing ratios do not change significantly. Even very strong reductions in aerosol number concentrations by a factor of 4, which is an unrealistic condition, cause only a 4 % increase in rain over the domain. If we assume our simulation has a fine enough grid resolution and an accurate representation of the relevant atmospheric processes, the simulated weak and non-linear response of cloud and rain properties to linearly scaled anthropogenic emissions suggests that the interactions among aerosol, cloud, and precipitation in the Amazonian convective environment are buffered by microphysical processes. It also implies that the convective environment is resilient to the changes in Nd that occur in response to localized anthropogenic aerosol perturbations.

Wang, Xuemei [University of Leeds (United Kingdom)↗

Intercomparison of satellite-derived cloud analyses for the Arctic Ocean in spring and summer

Several methods of deriving Arctic cloud information, primarily from satellite imagery, have been intercompared. The comparisons help in establishing what cloud information is most readily determined in polar regions from satellite data analysis. The analyses for spring-summer conditions show broad agreement, but subjective errors affecting some geographical areas and cloud types are apparent. The results suggest that visible and thermal infrared data may be insufficient for adequate cloud mapping over some Arctic surfaces.

Mcguffie, K.↗

Evaluating and Constraining Models’ Stratocumulus and Cumulus Cloud Feedbacks in the Tropics using Satellite Observations to Reduce Uncertainties in Future Climate Projections

Low-cloud feedbacks are thought to be the greatest source of uncertainty in climate projections on the centennial scale. Past research has mainly focused on the global low-cloud feedback as a whole whereas only a few studies have examined separated contributions from the two main low cloud categories: stratocumulus (Sc) and shallow cumulus (Cu). Here we aim to evaluate and constrain Sc and Cu cloud feedbacks in models using satellite observations to ultimately reduce their contribution to the spread in equilibrium climate sensitivity. We utilize the Cumulus and Stratocumulus CloudSat-CALIPSO Dataset (CASCCAD) recently developed by Cesana et al. (2019), which discriminates Sc from Cu clouds. This algorithm – based on cloud morphological characteristics at the orbital level – outperforms previous cloud-type classifications stemming from passive-sensor measurements. We investigate the observed relationship between the Sc and Cu cloud cover in tropical subsidence oceanic regions and their link to the primary low-cloud controlling factors (sea surface temperature, estimated inversion strength). To gain further insight into the Sc-Cu cloud partitioning, we explore the Sc-Cu relationship during the four meteorological seasons (DJF, MAM, JJA, SON) as well as on monthly timescale. We find a substantial negative correlation between the Sc and Cu cloud cover on annual, seasonal and monthly timescales. We finally evaluate how well climate models of the Coupled Model Intercomparison Project phase 5 (CMIP5) and phase 6 (CMIP6) agree with the observations. These results establish a framework to advance model parameterizations of the underlying physical processes driving the stratocumulus and shallow cumulus clouds (turbulence and convection).

Cloud feedbacks↗

Polar Cirrus Cloud Properties Through Long-Term Lidar and Radiometer Observations

In comparison to mid latitude cloud cover, knowledge of polar cirrus and other cloud cover is limited. The interpretations of satellite-based cloud imaging and retrievals in polar regions have major problems due to factors such as darkness and extreme low temperatures. Beginning in 2002 a NASA orbiting lidar instrument, GLAS, (Geoscience Laser Altimeter System) will unambiguously define cloud type and fraction with good coverage of polar regions. Active laser sensing gives the spatial and temporal distribution of clouds and diamond dust. In preparation for, and supplementing the GLAS measurements are ground based MP (micro pulse) lidar experiments providing continuous profiling. MP lidar installations have been operating at the South Pole since December 1999 and at the Atmospheric Radiation Measurement (ARM) program arctic site since 1996. Both at the ARM Barrow, Alaska site and at the South Pole station, Fourier-transform interferometers also observe clouds in the wavelength intervals between approximately 5 and 18 microns. Spectral instruments can yield cloud microphysical properties with additional information from lidar about the vertical extent of clouds being modeled. We examine the simultaneous lidar and spectral data from both Barrow and South Pole, to obtain cloud properties (optical depth, particle size) by the use of both instruments. The results have applications to interpretation of current satellite data, and GLAS measurements when available.

Spinhirne, James↗

Statistics of Cloud Optical Properties from Airborne Lidar Measurements

Cloud optical properties, such as extinction-to-backscatter ratio and depolarization ratio, have a significant impact on the accuracy of cloud extinction retrievals from lidar systems because parameterizations of these variables are often used in non-ideal conditions to determine cloud type and optical depth. Statistics and trends of these optical parameters were analyzed for four years, 2003-2007, of Cloud Physics Lidar data during five projects of varying geographic locations. Extinction-to-backscatter ratio (at 532 nm) was derived by calculating the transmission loss through the cloud layer, while depolarization ratio was computed using the parallel and perpendicular polarized 1064 nm channels. The majority of the cloud layers yielded an S-ratio between 10 and 40 sr with the S-ratio frequency distribution centered at 25 sr for ice clouds, 21 sr for mixed phase clouds, and 11 sr for water clouds. On average for ice clouds, S ratio slightly decreased with decreasing temperature, while depolarization ratio increased significantly as temperatures decreased. Trends for water and mixed phase clouds were also observed. Ultimately, these observed trends in optical properties as a function of temperature and geographic location will improve current parameterizations of extinction-to-backscatter ratio, which consequently increases accuracy in cloud optical depth and radiative forcing estimates.

Yorks, John E.↗

Characterizing the Influence of the General Circulation on Marine Boundary Layer Clouds

The seasonal and intraseasonal variability of boundary layer cloud in the subtropical eastern oceans are studied using combined data from the International Satellite Cloud Climatology Project (ISCCP) and the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis. Spectral analysis reveals that most of the time variability of cloud properties occurs on seasonal to annual time scales. The variance decreases one to two orders of magnitude for each decade of time scale decrease, indicating that daily to monthly time scales have smaller, but non-negligible variability. The length of these dominant time scales suggests that the majority of the variability is influenced by the general circulation and its interaction with boundary layer turbulence, rather than a product of boundary layer turbulence alone. Previous datasets have lacked the necessary resolution in either time or in space to properly characterize variability on synoptic scales; this is remedied by using global satellite-retrieved cloud properties. We characterize the intraseasonal subtropical cloud variability in both hemispheres and in different seasons. In addition to cloud fraction, we examine variability of cloud optical thickness - cloud top pressure frequency distributions. Despite the large concentration of research on the variability of Northern Hemisphere (NH) regions during summer, it is noted that the largest amplitude intraseasonal variability in the NH regions occurs during local winter. The effect of intraseasonal variability on the calculation and interpretation of seasonal results is investigated. Decreases in seasonally averaged cloud cover, optical thickness and cloud top pressure from the May-through-September season to the November-through-March season are most apparent in the NH regions. Further analysis indicates that these changes are due to an increase in frequency, but a decrease in the persistence of synoptic events. In addition, changes in cloud top pressure and optical thickness characteristics from the summer to winter seasons indicate that the NH subtropics undergo a change in dynamic regime with season. This change appears in the cloud fields as a shift from the more commonly seen lower-altitude, thicker optical thickness clouds to higher-altitude, thinner clouds. The latter cloud-type is associated with the lower sea level pressure, upward vertical velocity phase of the synoptic wave. Intraseasonal changes in cloud properties in the Southern Hemisphere and NH summer are much smaller in amplitude. Although they also appear to be linked to changes in the large-scale dynamics, similarly to NH winter variations, the relationships are more ambiguous due to the small amplitudes and longer time scales. We attempt to interpret some of these relationships using the results of the Betts and Ridgway (1989) box model. However, these results cannot consistently explain the patterns when results from all regions are considered, implying that this model may not adequately explain all the processes involved in the variability.

Rozendaal, Margaret A.↗

Improving Prediction of Surface Solar Irradiance Variability by Integrating Observed Cloud Characteristics and Machine Learning

A 5-year, 1-minute resolution observational dataset of clouds and solar radiation was produced that includes two metrics of the variability in surface solar irradiance due to cloud type and fractional sky cover. Multiple regression models were trained to fit observations of surface solar irradiance variability from those two cloud property predictors. We found that ensemble tree-based methods, Random Forest and Gradient Boosting Machine, have the least overfitting issues and showed the best performance with an R2 of 0.42. While the observational data trained in this study was only from one site, the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site in Oklahoma, initial comparisons of the seasonality of the statistics suggest that these results are relatively weather regime independent; the generality of such a finding across sites will be tested in future work. The observational data and developed machine learning model are being used to create a numerical weather prediction model parameterization to enable day-ahead solar variability prediction in a computationally efficient way. This is a first step towards creating a new paradigm of predicting day-ahead variability with the potential to provide a new tool to improve grid operation, planning, and resilience.

Riihimaki, Laura↗

Assessment of Two Stochastic Cloud Subcolumn Generators Using Observed Fields of Vertically Resolved Cloud Extinction

We evaluate two stochastic subcolumn generators used in GCMs to emulate subgrid cloud variability enabling comparisons with satellite observations and simulations of certain physical processes. Our evaluation necessitated the creation of a reference observational dataset that resolves horizontal and vertical cloud variability. The dataset combines two CloudSat cloud products that resolve two-dimensional cloud optical depth variability of liquid, ice, and mixed phase clouds when blended at ~200 m vertical and ~ 2 km horizontal scales. Upon segmenting the dataset to individual “scenes”, mean profiles of the cloud fields are passed as input to generators that produce scene-level cloud subgrid variability. The assessment of generator performance at the scale of individual scenes and in a mean sense is largely based on inferred joint histograms that partition cloud fraction within predetermined combinations of cloud top pressure –cloud optical thickness ranges. Our main finding is that both generators tend to underestimate optically thin clouds, while one of them also tends to overestimate some cloud types of moderate and high optical thickness. Associated radiative flux errors are also calculated by applying a simple transformation to the cloud fraction histogram errors, and are found to approach values almost as high as 3 Wm-2 for the cloud radiative effect in the shortwave part of the spectrum.

cloud variability↗

Global Radiative Flux Profile Dataset: Revised and Extended

The third generation of the radiative flux profile data product, called ISCCP-FH, is described. The revisions over the previous generation (called ISCCP-FD) include improvements in the radiative model representation of gaseous and aerosol effects, as well as a refined statistical model of cloud vertical layer variations with cloud types, and increased spatial resolution. The new product benefits from the changes in the new H-version of the ISCCP cloud products (called ISCCP-H): higher spatial resolution, revised radiance calibration and treatment of ice clouds, treatment of aerosol effects, and revision of all the ancillary atmosphere and surface property products. The ISCCP-FH product is evaluated against more direct measurements from the Clouds and the Earth’s Radiant Energy System and the Baseline Surface Radiation Network products, showing some small, overall reductions in average flux uncertainties; but the main results are similar to ISCCP-FD: the ISCCP-FH uncertainties remain ≲10 Wm −2 at the top-of-atmosphere (TOA) and ≲15 Wm −2 at surface for monthly, regional averages. The long-term variations of TOA, surface and in-atmosphere net fluxes are documented and the possible transient cloud feedback implications of a long-term change of clouds are investigated. The cloud and flux variations from 1998 to 2012 suggest a positive cloud-radiative feedback on the oceanic circulation and a negative feedback on the atmospheric circulation. This example demonstrates that the ISCCP-FH product can provide useful diagnostic information about weather-to-interannual scale variations of radiation induced by changes in cloudiness as well as atmospheric and surface properties.

ISCCP-FH↗