Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud boundaries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

The Impact of Dry Intrusions on Midlatitude Cold-Air Outbreak Cloud Transitions

Cold-air outbreaks (CAOs) form marine boundary layer (MBL) clouds that undergo rapid overcast-to-broken cloud regime transitions, initiated by substantial rain. CAOs are usually accompanied by dry intrusions (DIs) that subside as free-tropospheric (FT) air into the postfrontal sector of mid-latitude storms. For an exemplary cold-air outbreak in the NW Atlantic that showed faster transitions (corresponding to reduced extents of overcast clouds) closer to the low-pressure system, we posit that varying transitions are caused by an uneven meteorological pattern imposed by the prevailing DI. We compile satellite observations, reanalysis fields, and Lagrangian large-eddy simulations (LES) translating along MERRA2-based trajectories to show that postfrontal trajectories closer to the low-pressure system are uniquely favorable to rain formation (and, thus, cloud transitions) as they show (1) weaker FT subsidence rates, (2) greater FT humidity, (3) greater MBL windspeeds, and (4) a colder MBL as well as reduced lower-tropospheric stability. We present an updated conceptual view of postfrontal cloud formation that may guide future investigations.

Cold-air outbreaks↗
NASA NTRS2014

Extending 3D Near-Cloud Corrections from Shorter to Longer Wavelengths

Satellite observations have shown a positive correlation between cloud amount and aerosol optical thickness (AOT) that can be explained by the humidification of aerosols near clouds, and/or by cloud contamination by sub-pixel size clouds and the cloud adjacency effect. The last effect may substantially increase reflected radiation in cloud-free columns, leading to overestimates in the retrieved AOT. For clear-sky areas near boundary layer clouds the main contribution to the enhancement of clear sky reflectance at shorter wavelengths comes from the radiation scattered into clear areas by clouds and then scattered to the sensor by air molecules. Because of the wavelength dependence of air molecule scattering, this process leads to a larger reflectance increase at shorter wavelengths, and can be corrected using a simple two-layer model. However, correcting only for molecular scattering skews spectral properties of the retrieved AOT. Kassianov and Ovtchinnikov proposed a technique that uses spectral reflectance ratios to retrieve AOT in the vicinity of clouds; they assumed that the cloud adjacency effect influences the spectral ratio between reflectances at two wavelengths less than it influences the reflectances themselves. This paper combines the two approaches: It assumes that the 3D correction for the shortest wavelength is known with some uncertainties, and then it estimates the 3D correction for longer wavelengths using a modified ratio method. The new approach is tested with 3D radiances simulated for 26 cumulus fields from Large-Eddy Simulations, supplemented with 40 aerosol profiles. The results showed that (i) for a variety of cumulus cloud scenes and aerosol profiles over ocean the 3D correction due to cloud adjacency effect can be extended from shorter to longer wavelengths and (ii) the 3D corrections for longer wavelengths are not very sensitive to unbiased random uncertainties in the 3D corrections at shorter wavelengths.

aerosol optical depth↗
NASA NTRS2024

Long-Term Trends in Aerosols, Low Clouds, and Large-scale Meteorology over the Western North Atlantic from 2003 to 2020

A continuous decrease of aerosol over the western North Atlantic Ocean (WNAO) on decadal timescales provides a long-term experiment to evaluate how other natural and anthropogenic processes affect the manifestation of aerosol-cloud interactions in this region. Furthermore, the WNAO is a natural laboratory with diverse aerosol sources, marine boundary layer clouds that are more variable than marine stratocumulus deck regions, and unique flow regimes set up by the Gulf Stream and semi-permanent Bermuda High. We investigate how satellite-retrieved macrophysical and microphysical properties of low clouds and the surface shortwave irradiance changed from 2003 to 2020, in tandem with this aerosol decrease. The decadal changes in large-scale meteorology relating to the North Atlantic Oscillation (NAO) are also examined. We find no significant changes in low-cloud fraction but a widespread reduction in low-cloud optical depth attributed to fewer and larger cloud droplets with almost no change in cloud liquid water path. Despite robust signals in low-cloud optical properties together with aerosol decrease, a corresponding increase in the surface shortwave irradiance trends, also called surface brightening, is lacking. This absence of brightening is potentially due to concomitant changes found in large-scale meteorology associated with NAO— a Bermuda High strengthening, sea surface warming, and atmospheric moistening— as well as an increase in high cloud fraction that can counteract the surface brightening. Ultimately, our findings suggest that spatial patterns in the decadal meteorological variability, likely set up by NAO, contribute more to the surface cloud radiative effect over the WNAO than aerosol-cloud interactions.

J Minnie Park↗
NASA NTRS2022

Impact of Clouds and Blowing Snow on Surface and Atmospheric Boundary Layer Properties over Dome C, Antarctica

Clouds and blowing snow (BLSN) occur frequently over Antarctica, where it is critical to understand their feedbacks to surface and atmospheric boundary layer processes. Dome C, an elevated East Antarctic station, dominated by lengthy periods of surface longwave (LW) radiative cooling, is selected to reveal cloud and BLSN impacts within a largely stable environment. The sky condition is classified as clear, cloudy, or BLSN, using 3 years of Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations satellite data. Co-located and contemporaneous in situ observations are used to investigate the relationship of sky condition with surface and atmospheric boundary layer thermal structure, focusing on seasonal variability. Results show that increased downwelling LW radiation from clouds abate surface radiative cooling losses, contributing to warming during all seasons. An increase of 3°C in the mean surface air temperature is observed during spring, whereas, a more dramatic rise (around 10°C), due to accompanying large-scale subsidence, is observed during fall and winter in association with clouds. For all seasons, the wind speed and wind speed shear are strongest during BLSN events, and the surface-based inversion is weakened by cooling which peaks in a shallow above-surface turbulent layer. The stronger background stability during fall and winter seasons, restricts turbulence and BLSN depths generally to the lowest tens of meters. The Earth's cryosphere is among the most rapidly evolving yet least well-observed regions, and knowledge of clouds and BLSN interactions with the typical stable atmospheric boundary layer can help further understand energy and moisture exchanges.

CALIPSO↗
NASA NTRS2009

Evaluation of Low Altitude Cloud Amount Using CALIPSO Observations

Clouds strongly modulate the transfer of solar and thermal radiation within the atmosphere. Changes in the distribution and properties of clouds in a changing climate represent climate feedbacks affecting climate sensitivity, but the predicted responses of clouds from current climate models are inconsistent. Of particular concern is the response of low clouds, and it is recognized that proper representation of low clouds in global models is in need of improvement. Accurate satellite cloud climatologies are necessary to evaluate model performance, but existing climatologies require validation and are inadequate in some respects for model evaluation. CALIPSO and CloudSat have been acquiring high vertical resolution cloud profiles since launch in 2006. These global cloud datasets represent a new tool for evaluation of both models and existing satellite climatologies. While a recently available merged CALIPSO-CloudSat cloud climatology provides the most comprehensive view of global 3-D cloud distribution, the CALIPSO dataset set on its own has several unique characteristics, including profiles of the atmospheric boundary layer with 30 meter vertical resolution. In this paper we investigate the use of CALIPSO data to characterize boundary layer clouds, looking toward the development of a reliable global dataset suitable for evaluation of model performance.

Winker, Dave↗
NASA NTRS1986

Convective scale interaction: Arc cloud lines and the development and evolution of deep convection

Information is used from satellite data and research aircraft data to provide new insights concerning the mesoscale development and evolution of deep convection in an atmosphere typified by weak synoptic-scale forcing. The importance of convective scale interaction in the development and evolution of deep convection is examined. This interaction is shown to manifest itself as the merger and intersection of thunderstorm outflow boundaries (arc cloud lines) with other convective lines, areas or boundaries. Using geostationary satellite visible and infrared data convective scale interaction is shown to be responsible for over 85 percent of the intense convection over the southeast U.S. by late afternoon, and a majority of that area's afternoon rainfall. The aircraft observations provided valuable information concerning critically important regions of the arc cloud line: (1) the cool outflow region, (2) the density surge line interface region; and (3) the sub-cloud region above the surge line. The observations when analyzed with rapid scan satellite data, helped in defining the arc cloud line's life cycle as 3 evolving stages.

Purdom, James Francis Whitehurst↗
NASA NTRS1992

On the determination of cloud cover from satellite sensors - The effect of sensor spatial resolution

The effect of sensor spatial resolution on satellite-derived estimates of cloud fractional coverage is quantified on the basis of Landsat satellite radiance data. Cloud fraction is found to depend on cloud algorithm as much as it depends on sensor spatial resolution. Even for 28.5-m spatial resolution data, large cloud fraction differences exist between algorithms. Satellite cloud retrieval algorithms depend strongly on sensor spatial resolution and/or on the optical depth of the cloud field. When present, spatial resolution effects are small (less than 0.01) for pixel diameter less than 1/4 km and are large for pixel diameter larger than 1 km. The International Satellite Cloud Climatology Project bispectral threshold gives an increase in cloud fraction of 0.11 as spatial resolution degrades from 20 m to 8 km. The spatial coherence algorithm underestimates boundary layer cloud fraction by 0.18. The use of functional box counting and an assumption of fractal scale invariance overestimates the dependence of cloud fraction for spatial scales below 1 km.

Wielicki, Bruce A.↗
NASA NTRS2005

Comparison of Cloud Resolving Model Simulations to Remote Sensing Data

The purpose of this research was to evaluate the ability of a cloud-resolving model (CRM) to simulate the dynamical, radiative, and microphysical properties of deep convective cloud objects identified using CERES (Clouds and the Earth s Radiant Energy System) on board the Tropical Rainfall Measuring Mission (TRMM) satellite platform, for many cases. A deep convective cloud object is a contiguous region that is composed of satellite footprints that fulfill the following selection criteria: 100% cloud fraction, cloud optical depth > 10, and a cloud top height of at least 10 km. Selection criteria have also been formed for different types of boundary-layer clouds, as described in Xu et al. (2005). The purpose of the cloud object approach is to identify specific areas of where the cloud properties simulated by the CRM systematically differ from the observed cloud properties. Where these systematic differences exist, concrete steps can be made to improve the CRM s simulation of an entire class of clouds, rather than by tuning the model to correctly simulate a single case study, as is often done. Additional information regarding detailed approaches and findings are presented.

Randall, David A.↗
NASA NTRS1996

Independent Pixel and Two Dimensional Estimates of LANDSAT-Derived Cloud Field Albedo

A theoretical study has been conducted on the effects of cloud horizontal inhomogeneity on cloud albedo bias. A two-dimensional (2D) version of the Spherical Harmonic Discrete Ordinate Method (SHDOM) is used to estimate the albedo bias of the plane parallel (PP-IPA) and independent pixel (IPA-2D) approximations for a wide range of 2D cloud fields obtained from LANDSAT. They include single layer trade cumulus, open and closed cell broken stratocumulus, and solid stratocumulus boundary layer cloud fields over ocean. Findings are presented on a variety of averaging scales and are summarized as a function of cloud fraction, mean cloud optical depth, cloud aspect ratio, standard deviation of optical depth, and the gamma function parameter Y (a measure of the width of the optical depth distribution). Biases are found to be small for small cloud fraction or mean optical depth, where the cloud fields under study behave linearly. They are large (up to 0.20 for PP-IPA bias, -0.12 for IPA-2D bias) for large v. On a scene average basis PP-IPA bias can reach 0.30, while IPA-2D bias reaches its largest magnitude at -0.07. Biases due to horizontal transport (IPA-2D) are much smaller than PP-IPA biases but account for 20% RMS of the bias overall. Limitations of this work include the particular cloud field set used, assumptions of conservative scattering, constant cloud droplet size, no gas absorption or surface reflectance, and restriction to 2D radiative transport. The LANDSAT data used may also be affected by radiative smoothing.

Chambers, L. H.↗
NASA NTRS1998

FIRE Arctic Clouds Experiment

An overview is given of the First ISCCP Regional Experiment (FIRE) Arctic Clouds Experiment that was conducted in the Arctic during April through July, 1998. The principal goal of the field experiment was to gather the data needed to examine the impact of arctic clouds on the radiation exchange between the surface, atmosphere, and space, and to study how the surface influences the evolution of boundary layer clouds. The observations will be used to evaluate and improve climate model parameterizations of cloud and radiation processes, satellite remote sensing of cloud and surface characteristics, and understanding of cloud-radiation feedbacks in the Arctic. The experiment utilized four research aircraft that flew over surface-based observational sites in the Arctic Ocean and Barrow, Alaska. In this paper we describe the programmatic and science objectives of the project, the experimental design (including research platforms and instrumentation), conditions that were encountered during the field experiment, and some highlights of preliminary observations, modelling, and satellite remote sensing studies.

Curry, J. A.↗
NASA NTRS2001

Toward a Unified Parameterization of the Boundary Layer and Moist Convection: Simulations of Clear and Cloudy Convection - Part 3

A model that employs a new form of mass-flux closure (described in Part I of this paper) is applied to a variety of clear and cloudy planetary boundary layers (PBLs) including dry convection from the Wangara Experiment, trade wind cumulus from the Barbados Oceanographic and Meteorological Experiment (BOMEX), and marine stratocumulus from the Atlantic Stratocumulus Experiment (ASTEX). For Wangara, the simulated variances and fluxes match that expected from similarity arguments, while the mean state is a little less mixed than the observations. In the BOMEX simulation. the shape and magnitude of the fluxes and the turbulence kinetic energy budget agree with LES results and observations. However, the liquid water mixing ratio is too large. This is attributed to an underprediction of the skewness. In agreement with observations from the ASTEX experiment, many of the model-simulated fields distinctly reflect a regime in transition between the trade wind cumulus and the classic stratocumulus-topped boundary layers. In general, the simulated entrainment rate tends to be a little underpredicted in regimes where there is little cloud-top radiative cooling (Wangara and BOMEX), while it is overpredicted in regimes where this process is more critical (e.g., ASTEX). Prior work suggests that this may be related to the manner in which the pressure terms are parameterized in the model. Overall, the model is able to capture some key physical features of these PBL regimes, and appears to have the potential to represent both cloud and boundary layer processes. Thus, this approach is a first step toward unifying these processes in large-scale models.

Lappen, Cara-Lyn↗
NASA NTRS1991

Warm neutral halos around molecular clouds. II - H I and CO (J = 1-0) observations

Observational data are presented relating to the boundary regions between dense, molecular clouds and the more diffuse atomic gas. The data set consists of H I 21 cm and CO (J = 1-0) strip maps in 14 molecular clouds which traverse 62 known CO cloud boundaries. The angular lengths of the strips range from 0.5 deg to several degrees of arc, which is generally adequate to eliminate confusion with background (and foreground) H I. Most of the crossed boundaries (49 of 62) show clear evidence for the presence of H I emission maxima, or halos, lying outside the molecular clouds' gas. There is also general evidence for limb brightening in the CO emission.

Wannier, Peter G.↗
NASA NTRSDate not supplied

Overview of ACTIVATE’s First Year of Flights Targeting Aerosol-Cloud-Meteorology Interactions

The Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE) included 40 research flights in the winter and summer months of 2020 using a two-aircraft approach to simultaneously obtain in situ and remote sensing data of regions below, inside, and above boundary layer clouds. This presentation will summarize early findings from the first year of ACTIVATE flights with focus on aerosol and cloud droplet number concentration behavior, formation and evolution of clouds, and analysis of remote sensing retrievals of aerosol and cloud properties. There is a clear annual cycle in cloud droplet number concentration suggesting a marked annual cycle in aerosol-cloud interactions. Although aerosol particles are more abundant in spring and summer, the conditions needed to activate those particles into cloud droplets are weaker than in other colder months. Several flights targeted post-frontal clouds associated with cold air outbreaks pointing to enhanced levels of nucleated particles immediately above such clouds, and that ice formation hastens the transition from closed to open cloud structures in the sampled CAO events. Also observed in the marine boundary layer during CAOs is the frequent occurrence of non-spherical sea salt particles, which has significant implications for remote sensing retrievals.

Taylor Shingler↗
NASA NTRS1990

FIRE aircraft observations of horizontal and vertical transport in marine stratocumulus

A major goal of research on marine stratocumulus is to try to understand the processes that generate and dissipate them. One approach to studying this problem is to investigate the boundary layer structure in the vicinity of a transition from a cloudy to a cloud-free region to document the differences in structure on each side of the transition. Since stratiform clouds have a major impact on the radiation divergence in the boundary layer, the transition from a cloudy to a clear boundary layer is a region of large horizontal inhomogeneity in air temperature and turbulence intensity. This leads to a considerable difference in horizontal and vertical transports between the cloudy and cloud-free regions. Measurements are used from the NCAR Electra aircraft during flights 5 (7 July 1987) and 10 (18 July 1987) of FIRE for this purpose. Flight 5 coincided with a LANDSAT overflight, and was designed to investigate the transition across a well-defined N-S cloud boundary, since the LANDSAT image can document the cloud cover in considerable detail. Turbulence legs were flown about 60 km on both sides of the cloud boundary. Flight 10 was flown at night in an area of scattered small cumuli and broken cloud patches.

Paluch, Ilga R.↗
NASA NTRS2014

Remote Sensing of Cloud Top Height from SEVIRI: Analysis of Eleven Current Retrieval Algorithms

The role of clouds remains the largest uncertainty in climate projections. They influence solar and thermal radiative transfer and the earth's water cycle. Therefore, there is an urgent need for accurate cloud observations to validate climate models and to monitor climate change. Passive satellite imagers measuring radiation at visible to thermal infrared (IR) wavelengths provide a wealth of information on cloud properties. Among others, the cloud top height (CTH) - a crucial parameter to estimate the thermal cloud radiative forcing - can be retrieved. In this paper we investigate the skill of ten current retrieval algorithms to estimate the CTH using observations from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) onboard Meteosat Second Generation (MSG). In the first part we compare ten SEVIRI cloud top pressure (CTP) data sets with each other. The SEVIRI algorithms catch the latitudinal variation of the CTP in a similar way. The agreement is better in the extratropics than in the tropics. In the tropics multi-layer clouds and thin cirrus layers complicate the CTP retrieval, whereas a good agreement among the algorithms is found for trade wind cumulus, marine stratocumulus and the optically thick cores of the deep convective system. In the second part of the paper the SEVIRI retrievals are compared to CTH observations from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) and Cloud Profiling Radar (CPR) instruments. It is important to note that the different measurement techniques cause differences in the retrieved CTH data. SEVIRI measures a radiatively effective CTH, while the CTH of the active instruments is derived from the return time of the emitted radar or lidar signal. Therefore, some systematic differences are expected. On average the CTHs detected by the SEVIRI algorithms are 1.0 to 2.5 kilometers lower than CALIOP observations, and the correlation coefficients between the SEVIRI and the CALIOP data sets range between 0.77 and 0.90. The average CTHs derived by the SEVIRI algorithms are closer to the CPR measurements than to CALIOP measurements. The biases between SEVIRI and CPR retrievals range from −0.8 kilometers to 0.6 kilometers. The correlation coefficients of CPR and SEVIRI observations vary between 0.82 and 0.89. To discuss the origin of the CTH deviation, we investigate three cloud categories: optically thin and thick single layer as well as multi-layer clouds. For optically thick clouds the correlation coefficients between the SEVIRI and the reference data sets are usually above 0.95. For optically thin single layer clouds the correlation coefficients are still above 0.92. For this cloud category the SEVIRI algorithms yield CTHs that are lower than CALIOP and similar to CPR observations. Most challenging are the multi-layer clouds, where the correlation coefficients are for most algorithms between 0.6 and 0.8. Finally, we evaluate the performance of the SEVIRI retrievals for boundary layer clouds. While the CTH retrieval for this cloud type is relatively accurate, there are still considerable differences between the algorithms. These are related to the uncertainties and limited vertical resolution of the assumed temperature profiles in combination with the presence of temperature inversions, which lead to ambiguities in the CTH retrieval. Alternative approaches for the CTH retrieval of low clouds are discussed.

Hamann, U.↗
NASA NTRS2011

An Estimate of Low-Cloud Feedbacks from Variations of Cloud Radiative and Physical Properties with Sea Surface Temperature on Interannual Time Scales

Simulations of climate change have yet to reach a consensus on the sign and magnitude of the changes in physical properties of marine boundary layer clouds. In this study, the authors analyze how cloud and radiative properties vary with SST anomaly in low-cloud regions, based on five years (March 2000 - February 2005) of Clouds and the Earth s Radiant Energy System (CERES) -- Terra monthly gridded data and matched European Centre for Medium-Range Weather Forecasts (ECMWF) meteorological reanalaysis data. In particular, this study focuses on the changes in cloud radiative effect, cloud fraction, and cloud optical depth with SST anomaly. The major findings are as follows. First, the low-cloud amount (-1.9% to -3.4% /K) and the logarithm of low-cloud optical depth (-0.085 to -0.100/K) tend to decrease while the net cloud radiative effect (3.86 W/m(exp 2)/ K) becomes less negative as SST anomalies increase. These results are broadly consistent with previous observational studies. Second, after the changes in cloud and radiative properties with SST anomaly are separated into dynamic, thermodynamic, and residual components, changes in the dynamic component (taken as the vertical velocity at 700 hPa) have relatively little effect on cloud and radiative properties. However, the estimated inversion strength decreases with increasing SST, accounting for a large portion of the measured decreases in cloud fraction and cloud optical depth. The residual positive change in net cloud radiative effect (1.48 W/m(exp 2)/ K) and small changes in low-cloud amount (-0.81% to 0.22% /K) and decrease in the logarithm of optical depth (-0.035 to -0.046/ K) with SST are interpreted as a positive cloud feedback, with cloud optical depth feedback being the dominant contributor. Last, the magnitudes of the residual changes differ greatly among the six low-cloud regions examined in this study, with the largest positive feedbacks (approximately 4 W/m(exp 2)/ K) in the southeast and northeast Atlantic regions and a slightly negative feedback (-0.2 W/m(exp 2)/ K) in the south-central Pacific region. Because the retrievals of cloud optical depth and/or cloud fraction are difficult in the presence of aerosols, the transport of heavy African continental aerosols may contribute to the large magnitudes of estimated cloud feedback in the two Atlantic regions.

Eitzen, Zachary A.↗
NASA NTRS1998

The detection of clouds, aerosols and marine atmospheric boundary layer characteristics from simulated GLAS data

Scheduled for launch in 2001 as part of NASA's Earth Observing System (EOS), the Geoscience Laser Altimeter System (GLAS) will provide continuous laser sounding of the earth's atmosphere from space for the first time. From its polar orbit about 600 km above the surface, GLAS will employ a 40 Hz solid state laser operating at 1064 nm to measure topography to an accuracy of 10 cm. Simultaneously, the atmospheric channels (1064 and 532 nm) of GLAS will provide profiles of atmospheric backscatter from 40 km to the ground with 75 meter vertical resolution (Spinhirne and Palm, 1996). These measurements will give scientists an unprecedented global data set on the vertical structure of clouds and aerosols which will greatly aid research efforts aimed at understanding their effects on climate and their role in climate change (Hartman, 1994). To better understand and predict the performance of the GLAS atmospheric channels, a computer model was developed to simulate the type of signal that the instrument would likely produce. The model uses aircraft lidar data and provides realistic simulated GLAS data sets over large areas spanning a wide range of atmospheric conditions. These simulated GLAS datasets are invaluable for designing and testing algorithms for the retrieval of parameters such as cloud and aerosol layer height, optical depth and extinction cross section. This work is currently proceeding and in this paper we will present results of the cloud and aerosol detection algorithm with emphasis on the detection of Marine Atmospheric Boundary Layer (MABL) aerosol. In addition, we use a recently developed technique to ascertain the feasability of estimating MABL moisture and temperature structure from spaceborne systems such as GLAS.

Palm, Stephen P.↗
NASA NTRS1990

Structures observed on the spot radiance fields during the FIRE experiment

Three Spot images taken during the FIRE experiment on stratocumulus are analyzed. From this high resolution data detailed observations of the true cloud radiance field may be made. The structure and inhomogeneity of these radiance fields hold important implications for the radiation budget, while the fine scale structure in radiance field provides information on cloud dynamics. Wieliki and Welsh, and Parker et al., have quantified the inhomogeneities of the cumulus clouds through a careful examination of the distribution of cloud (and hole) size as functions of an effective cloud diameter and radiance threshold. Cahalan (1988) has compared for different cloud types of (stratocumulus, fair weather cumulus, convective clouds in the ITCZ) the distributions of clouds (and holes) sizes, the relation between the size and the perimeter of these clouds (and holes), and examining the possibility of scale invariance. These results are extended from LANDSAT resolution (57 m and 30 m) to the Spot resolution (10 m) resolution in the case of boundary layer clouds. Particular emphasis is placed on the statistics of zones of high and low reflectivity as a function of a threshold reflectivity.

Seze, Genevieve↗