Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “chemical elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

The case for at least three mare basalt magmas at the Luna 24 landing site

Petrographic and electron microprobe studies have been carried out for 1230 particles from the Luna 24 drill core. At least three mare basalts were distinguished on the basis of major and minor element chemical compositions of pyroxenes. Mg-rich monomineralic particles of olivine and pyroxene defined one major type. The other two magmas were identified by the Ti/(Ti + Cr) ratio at constant Fe/(Fe + Mg) ratio in pyroxenes derived from polymineralic igneous lithic fragments. Whole rock chemical analyses for V and Cr also provided evidence for these distinct magmas.

Nielsen, R. L.↗

Ar-39-Ar-40 and petrologic study of Luna 24 samples 24077,13 and 24077,63

The ferrogabbro 24077,13, with pyroxene and plagioclase major and minor element chemical ranges comparable to the dominant ferrogabbro component in the Luna 24 core, has a Ar-39-Ar-40 temperature release age of 3.33 plus or minus 0.21 billion years. The metaferrobasalt 24077,63 is very fine-grained with a texture and mineralogy consistent with contact metamorphism between superimposed basalt flows or within a single flow. The Ar-39-Ar-40 plateau age of 24077,63 is 3.26 plus or minus 0.4 billion years. The basalt flows in Mare Crisium are about the same age as those of Mare Imbrium and younger than those of Mare Tranquillitatis and Mare Serenitatis.

Schaeffer, O. A.↗

Chemical processes involved in the initiation of hot corrosion of B-1900 and NASA-TRW VIA

Sodium sulfate induced hot corrosion of B-1900 and NASA-TRW VIA at 900 C was studied with special emphasis on the chemical reactions occurring during and immediately after the induction period. Thermogravimetric tests were run for set periods of time after which the samples were washed with water and water soluable metal salts and/or residual sulfates were analyzed chemically. Element distributions within the oxide layer were obtained from electron microprobe X-ray micrographs. A third set of samples were subjected to surface analysis by X-ray photoelectron spectroscopy. Evolution of SO2 was monitored throughout many of the hot corrosion tests. Results are interpreted in terms of acid-base fluxing mechanisms.

Fryburg, G. C.↗

Float zone experiments

The objectives of this work are: to determine if surface tension-driven convection in float zone experiments may be controlled by means of surface films; and if convection can be controlled, determine whether homogeneous solute distributions will be achieved in float zone solidification and whether accurate measurements of liquid diffusion coefficients may be obtained from float zone solidification experiments. Sn was chosen as a model material because it is a group IV element, chemically similar to Si and Ge and its low melting point and low vapor pressure allow Auger spectroscopy to be employed with liquid samples.

Verhoeven, J.↗

Planetary phase equilibria - Application to formation of earth, Venus and Mercury

Calculations of phase equilibria in a solar mixture with variable hydrogen abundance show that the major element chemical composition of the earth and Venus can be simply explained by their formation in equilibrium at 800 and 1000 K, respectively, at a pressure of 0.001 atm, provided that there is an iron loss from the region of proto-Venus relative to the solar nebula. The calculated mineralogical chemical compositions of the two planets are in excellent agreement with the available chemical and physical data. Phase equilibrium calculations at 1500 K and 0.001 atm show that nearly 96% of the silicates and 81% of metal must have been lost from the region of proto-Mercury.

Saxena, S. K.↗

Long-term thermal degradation and alloying constituent effects on five boron/aluminum composites

Thermal exposure effects on the properties of five boron/aluminum composite systems were experimentally investigated. The composite systems were 49 volume percent boron fibers (203 micron diameter) in aluminum-alloy matrices 1100 Al, 2024 Al, 3003 Al, 5052 Al, and 6061 Al. Specimens were thermally exposed up to 10,000 hours at 500 K and 590 K, up to 500 hours at 730 K, and up to 10,000 hours at 500 K and 590 K, up to 500 hours at 730 K, and up to 2000 thermal cycles between 200 K and 590 K. Composite longitudinal and transverse tensile strengths, longitudinal compression strength, and in-plane shear strength were determined. None of the systems was severely degraded by exposure at 590 K. The best performing system was B-2024 Al. Effects of matrix alloys on degradation mechanisms were experimentally investigated. Composite specimens and individual fibers were metallurgically analyzed with a scanning electron microscope and an electron microprobe to determine failure characteristics, chemical element distribution, and reaction layer morphology. Alloying constituents were found to be affect the composite degradation mechanisms as follows: alloys containing iron, but without manganese as a stabilizer, caused increased low-temperature degradation; alloys containing magnesium, iron, or manganese caused increased degradation; and alloys containing copper caused increased fiber strength.

Olsen, G. C.↗

VLA observations of Saturn at 1.3, 2, and 6 cm

Radio maps with a resolution of 1.5 arcsec were made of Saturn at 1.3, 2, and 6 cm. The inclination of the ring plane was -5.4 deg. A fraction of 0.49 + or - 0.08 of Saturn's emitted light is transmitted through the rings at 2 and 6 cm. This value converts to an effective head-on or normal optical depth of 0.07 + or - 0.02. The transparency at this small inclination angle must be provided entirely by the regions of very low optical depth, e.g., the Cassini and Encke's Divisions, and to achieve the desired number this requires either a relatively large fraction of gaps or a strong forward scattering by the ring particles. The planetary disk appears to be much less limb darkened in the N-S than the E-W direction, while cuts across the planet, averaged over all directions, agree with the theoretical limb-darkening curves for a planet with a uniform atmosphere and solar abundances for all chemical elements.

De Pater, I.↗

Chemistry of cometary meteoroids from video-tape records of meteor spectra

The chemistry of the cometary meteoroids was studied by closed circuit television observing systems. Vidicon cameras produce basic data on standard video tape and enable the recording of the spectra of faint shower meteors, consequently the chemical study is extended to smaller particles and we have a larger data bank than is available from the more conventional method of recording meteor spectra by photography. The two main problems in using video tape meteor spectrum records are: (1) the video tape recording has a much lower resolution than the photographic technique; (2) video tape is relatively new type of data storage in astronomy and the methods of quantitative photometry have not yet been fully developed in the various fields where video tape is used. The use of the most detailed photographic meteor spectra to calibrate the video tape records and to make positive identification of the more prominent chemical elements appearing in the spectra may solve the low resolution problem. Progress in the development of standard photometric techniques for the analysis of video tape records of meteor spectra is reported.

Millman, P. M.↗

Relic interstellar grains in Murchison meteorite

It is shown that, in the Murchison meteorite, the D/H ratios of hydrogen are unusually high in several separates and in one case up to 30 times the cosmic value of 2 x 10 to the -5th. Many phases show high C-13/C-12 ratios, up to 2.5 times the terrestrial value of 0.011. These C-13-rich and D-rich components of the two chemical elements are not correlated. They are heterogeneously distributed, suggesting that different components in the meteorite originated from different astrophysical sites and at different times. The D-rich hydrogen in the meteorite is probably due to molecules formed by ion-molecule reactions in interstellar clouds while the tiny amount of C-13-rich carbon is probably due to nucleosynthesis in red giant stars as suggested by Swart et al. (1983). Both of these heavy-isotope enriched components survived homogenization in the accumulation and subsequent history of the meteorites.

Yang, J.↗

In situ gas and ion measurements at comet Halley

The Giotto space probe's neutral mass spectrometer experiment has determined the abundances and the chemical, elemental and isotopic compositions of gases and low energy ions in the coma of comet Halley. Preliminary results show water predominating, at about 80 percent by volume, with a density of 4.7 x 10 to the 7th molecules/cu cm at 1000 km and a photodestruction scale length of 39,000 km. Limits on the abundances of CO2, NH3 and CH4 relative to H2O are also obtained. An ion temperature change observation indicates a contact surface location at 47,000 + or - 200 km.

Krankowsky, D.↗

Separating Peaks in X-Ray Spectra

Deconvolution algorithm assists in analysis of x-ray spectra from scanning electron microscopes, electron microprobe analyzers, x-ray fluorescence spectrometers, and like. New algorithm automatically deconvolves x-ray spectrum, identifies locations of spectral peaks, and selects chemical elements most likely producing peaks. Technique based on similarities between zero- and second-order terms of Taylor-series expansions of Gaussian distribution and of damped sinusoid. Principal advantage of algorithm: no requirement to adjust weighting factors or other parameters when analyzing general x-ray spectra.

Nicolas, David↗

Research relative to a model of the Orion nebula

Research basically has been directed along two avenues. First of all, there is a long-standing interest in modeling H II regions in order to understand the physical processes involved and to extract important astrophysical information. This includes knowledge of chemical elemental abundances and properties of the exciting stars, such as their far ultraviolet spectrum. The Orion Nebula is a prime candidate to study because it is nearby, bright, the extinction is not large, and its appearance is reasonably circular. Such a shape is consistent with a geometrical structure that is spherically symmetric (1-D) or one that is axisymmetric (2-D) seen nearly face-on. Previously all detailed modeling of the ionization and thermal structure of H II regions has been confined to 1-D because of computational complexity. There is now the capability to treat the 2-D case with much of the level of physical sophistication as the 1-D case. The interpretation of the spectra of gaseous nebulae in terms of underlying physical processes requires measurements of line intensities at different points in the object and over as wide a set of excitation and ionization conditions as practical.Observations of nebulae have been made for many years in the optical and radio but only recently in the infrared and ultraviolet. These relatively new windows allow observations of lines of ionization states not available in the radio or optical--providing a much more complete set of known quantities to undertake a meaningful modeling effort.

Zuckerman, B. M.↗

Influence of the equilibration process in supernova remnant shocks on their X-ray and coronal iron surface brightnesses

SNR model computation results have been obtained which indicate that the radial distribution of soft X-ray and forbidden coronal Fe surface brightnesses in adiabatic, middle-aged SNRs can be used as a basis of discrimination for whether the equilibration time is short or long, by comparison with the ionization time-scale. These models are based on a grid of Sedov-Taylor models with time-dependent, nonequilibrium collisional ionization of 13 chemical elements; the two extreme equilibration conditions assumed are T(ion) = T(e) and a Coulomb equilibration of ion and electron temperatures. The models are compared with data taken from X-ray images of the Cygnus Loop and Puppis A.

Jerius, D.↗

NASA thesaurus. Volume 3: Definitions

Publication of NASA Thesaurus definitions began with Supplement 1 to the 1985 NASA Thesaurus. The definitions given here represent the complete file of over 3,200 definitions, complimented by nearly 1,000 use references. Definitions of more common or general scientific terms are given a NASA slant if one exists. Certain terms are not defined as a matter of policy: common names, chemical elements, specific models of computers, and nontechnical terms. The NASA Thesaurus predates by a number of years the systematic effort to define terms, therefore not all Thesaurus terms have been defined. Nevertheless, definitions of older terms are continually being added. The following data are provided for each entry: term in uppercase/lowercase form, definition, source, and year the term (not the definition) was added to the NASA Thesaurus. The NASA History Office is the authority for capitalization in satellite and spacecraft names. Definitions with no source given were constructed by lexicographers at the NASA Scientific and Technical Information (STI) Facility who rely on the following sources for their information: experts in the field, literature searches from the NASA STI database, and specialized references.

Source record↗

In situ XRF and gamma ray spectrometer for Mars sample return mission

A combined in situ X-ray fluorescence (XRF) and passive gamma ray spectrometer instrument is proposed for the chemical elemental analysis of various Martian surfaces and samples. The combined instrument can be carried on board a rover. The passive gamma ray or the neutron excited gamma ray system would be used to determine the elemental composition of the Martian surface while the rover is in motion. The XRF system would be used to perform analysis either on the Martian surface or on collected samples when the rover is stationary. The latter function is important both in cataloging the collected samples and in the selection of samples to be returned to earth. For both systems, data accumulation time would be on the order of 30 minutes. No sample preparation would be necessary.

Lo, I. Yin↗

A simple, mass balance model of carbon flow in a controlled ecological life support system

Internal cycling of chemical elements is a fundamental aspect of a Controlled Ecological Life Support System (CELSS). Mathematical models are useful tools for evaluating fluxes and reservoirs of elements associated with potential CELSS configurations. A simple mass balance model of carbon flow in CELSS was developed based on data from the CELSS Breadboard project at Kennedy Space Center. All carbon reservoirs and fluxes were calculated based on steady state conditions and modelled using linear, donor-controlled transfer coefficients. The linear expression of photosynthetic flux was replaced with Michaelis-Menten kinetics based on dynamical analysis of the model which found that the latter produced more adequate model output. Sensitivity analysis of the model indicated that accurate determination of the maximum rate of gross primary production is critical to the development of an accurate model of carbon flow. Atmospheric carbon dioxide was particularly sensitive to changes in photosynthetic rate. The small reservoir of CO2 relative to large CO2 fluxes increases the potential for volatility in CO2 concentration. Feedback control mechanisms regulating CO2 concentration will probably be necessary in a CELSS to reduce this system instability.

Garland, Jay L.↗

Carbon in comet dust

The association of Halley particle results with data from existing meteoritic materials that can be analyzed in the laboratory is discussed. Comet samples must exist in present collections of meteoritic materials and the Halley results provide clues for identifying them. Although it is not presently possible to positively identify cometary meteorites or cometary interplanetary dust (IDP) samples, it is possible to determine which materials are similar to Halley dust and which ones are distinctly unlike Halley. The properties of these existing Halley-compatible samples provide insight into the possible properties of cometary material. Positive identification of meteoritic comet samples or direct samples returned from a comet nucleus would of course revolutionize our ability to study carbonaceous matter in comets. Modern analytical techniques are very powerful and it is possible to perform elemental, chemical, mineralogical and even limited isotopic analysis on micron-size particles. There is an important synergism between the laboratory studies of collected samples and astronomical data from comets and interstellar grains. To fully interpret results there must be convincing methods for associating a particular class or classes of meteoritic material with comets. Ultimately this will be done by direct comet sample return such as the Rosetta mission under development by ESA. At the present time the only links that can be made involve comparison with sample properties and measurable properties of comets. Unfortunately there is at present no known unique property of cometary dust that allows its absolute identification in the laboratory. The results from Halley encounters and observation do provide much new information on cometary grains. The Halley grain compositions, density, size distribution and scattering properties all provide a basis for future investigations. Other Halley properties such as the presence of polyoxymethylene and the 3.4um emission feature could play key roles for making convincing links in the future.

Brownlee, D. E.↗

Development of mercuric iodide uncooled x ray detectors and spectrometers

The results obtained in the development of miniature, lowpower, light weight mercuric iodide, HgI2, x ray spectrometers for future space missions are summarized. It was demonstrated that HgI2 detectors can be employed in a high resolution x ray spectrometer, operating in a scanning electron microscope. Also, the development of HgI2 x ray detectors to augment alpha backscattering spectrometers is discussed. These combination instruments allow for the identification of all chemical elements, with the possible exception of hydrogen, and their respective concentrations. Additionally, further investigations of questions regarding radiation damage effects in the HgI2 x ray detectors are reported.

Iwanczyk, Jan S.↗