Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “center”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Autopilot Servoactuator With Pressurized Detented Centering

Centering valve allows use of mechanical override in autopilot mode. Alternate system designed incorporates centering valves into four FBW servos, providing detents for reacting mechanical system forces following FBW shutdown. Required linkage hard point incorporated directly into autopilot servoactuator by centering valve assembly shown. All components in this functional hydraulic schematic usually present in contemporary aircraft flight-control-system autopilot servoactuators, with exception of centering valve. Centering valve, which serves as hard-point linkage for mechanical system forces, incorporated directly into flight control system.

Aring, J. A.↗

Far Infrared Continuum Emission from the Galactic Center

High angular resolution observations of the Galactic center from the Kuiper Airborne Observatory are discussed. The results of multi-wavelength mapping reveal that the 30 micron distribution shows a single peak which lies between two emission lobes seen at the longer wavelengths. The 30 micron emission is known from ground-based measurements to peak at the galactic center. The far-infrared color temperature and luminosity also peak at the position of the galactic center, and the observations show a strong temperature gradient away from the galactic center in all directions. Consideration of these data leads to the conclusion that the dust density decreases inward over the central 3 pc of the Galaxy, and that the central parsec of the Galaxy is remarkably devoid of dust, so that optical and ultraviolet photons may traverse it freely. The inferred total luminosity of the sources that heat the dust radiating the far-infrared emission from the central few pc of the Galaxy is 1 to 3 x to the 7th power L(Sun). It is probable that these same sources are responsible for ionizing the plasma at the galactic center.

Werner, M. W.↗

C II forbidden-line 158 micron mapping in Sagittarius A Rotation curve and mass distribution in the galactic center

Based on data obtained with the NASA Kuiper Airborne Observatory 91.4 cm telescope, the 158-micron fine structure line emission of C(+) is mapped near the galactic center. The strongest emission comes from a 10-pc FWHM diameter disk centered on Sgr A West whose dominant motion is rotation. Extended C(+) emission is also found from the +50 km/s galactic center molecular cloud, and a second cloud at v(LSR) of about -35 km/s. The rotation curve and mass distribution within 10 pc of the galactic center are derived, and the C(+) profiles show a drop-off of rotation velocity between 2 and 10 pc. A mass model is suggested with 2-4 million solar masses in a central point mass, and a M/L ratio of the central stellar cluster of 0.5 solar masses/solar luminosities, suggesting a large abundance of giants and relatively recent star formation in the center.

Lugten, J. B.↗

Automation of spacecraft control centers

The objective is to describe the further automation of the Payload Operations Control Centers, specifically the Mission Operations Room, by using a series of expert systems interconnected together. The feasibility of using expert systems in the Mission Operations Room is presently being determined. The expert system under development is called the Communications Link Expert Assistance Resource (CLEAR) project. It is the first control center expert system being designed and implemented at Goddard. It will demonstrate the feasibility and practicality of expert systems in a real-time control center environment. There is a two-fold purpose. First is to briefly describe the present effort of the CLEAR expert system under development. The second is to describe how a series of interacting expert systems could be developed to almost totally automate the Mission Operations Room within the control center. How these expert systems would be put together and what functions they could perform in the control center is described. These efforts will provide a great deal of applicability toward the automation of the space station.

Dutilly, Robert↗

Large screen display for the Mission Control Center

The Mission Control Center (MCC), located at the Johnson Space Center near Houston, Texas, is the primary point of control and monitoring for National Space Transportation System (NSTS) flight activities. NSTS flight managers monitor and command spacecraft from one of two Flight Control Rooms (FCR). Each FCR is equipped with five large screen displays for group dissemination of spacecraft system status and vehicle position relative to Earth geography. The primary or center screen display is ten feet in height and twenty feet in width. The secondary or side screens are seven and one-hald feet high and ten feet wide. The center screen projection system is exhibiting high maintenance costs and is considered to be in wear-out phase. The replacement of the large center screen displays at the MCC is complicated by the unique requirements of the Flight Controller user. These requirements demand a very high performance, multiple color projection system capable of the display of high resolution text, graphics and images produced in near real time. The current system to be replaced, the replacement system requirements, the efforts necessary to procure the major element of this system (the projector) for the government, and how the new capabilities are to be integrated into the existing MCC operational configuration are discussed.

Skudlarek, Martin J.↗

The Pilot Land Data System (PLDS) at the Ames Research Center manages aircraft data in collaboration with an ecosystem research project

The Pilot Land Data System (PLDS) is a data and information system serving NASA-supported investigators in the land science community. The three nodes of the PLDS, one each at the Ames Research Center (ARC), the Goddard Space Flight Center (GSFC) and the Jet Propulsion Laboratory (JPL), cooperate in providing consistent information describing the various data holding in the hardware and software (accessible via network and modem) that provide information about and access to PLDS-held data, which is available for distribution. A major new activity of the PLDS node at the Ames Research Center involves the interaction of the PLDS with an active NASA ecosystem science project, the Oregon Transect Ecosystems Research involves the management of, access to, and distribution of the large volume of widely-varying aircraft data collected by OTTER. The OTTER project, is managed by researchers at the Ames Research Center and Oregon State University. Its principal objective is to estimate major fluxes of carbon, nitrogen, and water of forest ecosystems using an ecosystem process model driven by remote sensing data. Ten researchers at NASA centers and universities are analyzing data for six sites along a temperature-moisture gradient across the western half of central Oregon (called the Oregon Transect). Sensors mounted on six different aircraft have acquired data over the Oregon Transect in support of the OTTER project.

Angelici, Gary↗

Space station control center architecture

The Space Station control center (SSCC) is under the cognizance of the Johnson Space Center and is located adjacent to the Shuttle's mission control center. Responsibility for design, development, and operations of the control center is the responsibility of the mission operations directorate at JSC. Space Station Ground Systems Division is responsible for design and development of the control center systems which is currently in process under the mission support contractor team led by Loral Space Information Systems. It is early in the life cycle of the SSCC project. System functional design review was completed. Subsystem requirements are now being developed and reviewed. A new facility will be available for development activities.

Schmalz, Karen↗

Photosynthetic reaction center complexes from heliobacteria

Photosynthetic reaction centers are pigment-protein complexes that are responsible for the transduction of light energy into chemical energy. Considerable evidence indicates that photosynthetic organisms were present very early in the evolution of life on Earth. The goal of this project is to understand the early evolutionary development of photosynthesis by examining the properties of reaction centers isolated from certain contemporary organisms that appear to contain the simplest photosynthetic reaction centers. The major focus is on the family of newly discovered strictly anaerobic photosynthetic organisms that are grouped with the gram-positive phylum of bacteria. The properties of these reactions centers suggest that they may be the descendants of an ancestor that also gave rise to Photosystem 1 found in oxygen-evolving photosynthetic organisms. Photoactive reaction center-core antenna complexes were isolated from the photosynthetic bacteria, Heliobacillus mobilis and Heliobacterium gestii, by extraction of membranes with Deriphat 160C followed by differential centrifugation and sucrose density gradient centrifugation. Other aspects of this investigation are briefly discussed.

Trost, J. T.↗

Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

Nanzetta, Philip↗

Off-center nuclei in galaxies

The nucleus of a galaxy orbits around the mass centroid. Orbital motions appear overstable in numerical experiments started with a galaxy's nucleus at rest atop its mass centroid. The amplitude doubles in 6-10 orbital periods. Orbits precess, nutate, and change their amplitudes, but they keep fairly constant periods. Orbital periods are in resonance with local particle motions, and amplitudes reach a core radius. This resonance suggests that center motions are a local, rather than a global, phenomenon. The overstability implies that a galaxy cannot be formed in nature with its nucleus at rest atop its mass centroid, and that nuclei orbit the mass centroid in real galaxies. These center motions should show up observationally as a shift of the nucleus away from the center defined by nearby isophotes. Off-center nuclei have been reported in many galaxies (e.g., M33, M101, NGC 3379, NGC 3384). Other kinds of observations confirmed the picture of nonsteady galactic centers as well. Gas trapped in moving nuclear regions of a galaxy should show strange flow patterns with possible shocks. The nuclear regions of galaxies including Milky Way and of globular clusters are not likely to be in a static steady state.

Miller, R. H.↗

Interstellar scattering toward the Galactic center as probed OH/IR stars

Angular broadening measurements of 20 OH/IR stars near the Galactic center are reported. VLBA antennas and the VLA were employed to perform a MkII spectral line VLBI experiment. The distribution of interstellar scattering toward the Galactic center is determined on the basis of the present data, together with additional data taken from the literature. A region of pronounced scattering (525 mas at 1.612 GHz) nearly centered on Sgr A* was found. Two interpretations for the enhanced scattering are presented. One hypothesis is that the scattering is due to a clump of enhanced turbulence, such as those that lie along lines of sight to other known objects, that has no physical relationship to the Galactic center. The other model considers the location of the enhanced scattering to arise in the Galactic center itself. The physical implications of the models provide information on the nature of the interstellar scattering.

Van Langevelde, Huib J.↗

The Center of Excellence for Hypersonics Training and Research at the University of Texas at Austin

Over the period of this grant (1986-92), 23 graduate students were supported by the Center and received education and training in hypersonics through MS and Ph.D. programs. An additional 8 Ph.D. candidates and 2 MS candidates, with their own fellowship support, were attracted to The University of Texas and were recruited into the hypersonics program because of the Center. Their research, supervised by the 10 faculty involved in the Center, resulted in approximately 50 publications and presentations in journals and at national and international technical conferences. To provide broad-based training, a new hypersonics curriculum was created, enabling students to take 8 core classes in theoretical, computational, and experimental hypersonics, and other option classes over a two to four semester period. The Center also developed an active continuing education program. The Hypersonics Short Course was taught 3 times, twice in the USA and once in Europe. Approximately 300 persons were attracted to hear lectures by more than 25 of the leading experts in the field. In addition, a hypersonic aerodynamics short course was offered through AIAA, as well as short courses on computational fluid dynamics (CFD) and advanced CFD. The existence of the Center also enabled faculty to leverage a substantial volume of additional funds from other agencies, for research and graduate student training. Overall, this was a highly successful and highly visible program.

Dolling, David S.↗

Overview of the Center for Space Construction

The purpose of this overview is to outline the position of the Center for Space Construction within the context of space-related programs at the University of Colorado. the University's historically strong research and graduate programs in space science and its strong undergraduate aerospace engineering program were the starting point in 1984 for a major expansion of space-related education and research programs at the Boulder campus. This initiative has resulted in a tripling of space-related research as well as a large increase in the enrollment of high quality engineering students, particularly at the graduate level. The Center for Space Construction is a major element of this initiative, since it represents a mechanism for interdisciplinary and system level research and education within the Engineering College, thus filling a major need. Seventeen faculty members and 37 students from 7 academic units are associated with the Center and are interacting with each other and with the CSC Associates (a group of industrial organizations and government laboratories). The first Ph.D. has been awarded to a student working in the Center; the second Ph.D. is expected later this year. Several new courses have been introduced in the College. Finally, excellent research is being conducted and Center participants are publishing in the open literature.

Hearth, Donald P.↗

SAMPEX payload operation control center implementation

The Solar Anomolous and Magnetospheric Explorer (SAMPEX) satellite was launched in July 1992. It was the first in the NASA Small Explorer (SMEX) series. In building the real-time control center facility, several new mission support challenges had to be met: CCSDS telemetry and command format, 900 Kbps telemetry data, and shorter turn-around time for control center development than previous missions. The SAMPEX Payload Operations Control Ccnter (POCC) was also the first control center for a new satellite to be based on the Transportable Payload Operations Control Center (TPOCC) system architecture and methodology. This approach has both guided the implementation of the SAMPEX control center and provided some of the building blocks. By using the TPOCC architecture to build the SAMPEX POCC, the real-time operations area was miniaturized into one room, whereas previous missions needed multiple large rooms. The development cost of the SAMPEX POCC was reduced from previous missions and will provide for further cost savings in the future SMEX satellites. This paper describes the system as built and some of the enhancements in progress to create this teleoperations environment.

Mandl, Daniel↗

Customizing graphical user interface technology for spacecraft control centers

The Transportable Payload Operations Control Center (TPOCC) project is applying the latest in graphical user interface technology to the spacecraft control center environment. This project of the Mission Operations Division's (MOD) Control Center Systems Branch (CCSB) at NASA Goddard Space Flight Center (GSFC) has developed an architecture for control centers which makes use of a distributed processing approach and the latest in Unix workstation technology. The TPOCC project is committed to following industry standards and using commercial off-the-shelf (COTS) hardware and software components wherever possible to reduce development costs and to improve operational support. TPOCC's most successful use of commercial software products and standards has been in the development of its graphical user interface. This paper describes TPOCC's successful use and customization of four separate layers of commercial software products to create a flexible and powerful user interface that is uniquely suited to spacecraft monitoring and control.

Beach, Edward↗

Scientific and technical photography at NASA Langley Research Center

As part of my assignment connected with the Scientific and Technical Photography & Lab (STPL) at the NASA Langley Research Center I conducted a series of interviews and observed the day to day operations of the STPL with the ultimate objective of becoming exposed first hand to a scientific and technical photo/imaging department for which my school prepares its graduates. I was also asked to share my observations with the staff in order that these comments and observations might assist the STPL to better serve its customers. Meetings with several individuals responsible for various wind tunnels and with a group that provides photo-optical instrumentation services at the Center gave me an overview of the services provided by the Lab and possible areas for development. In summary form these are some of the observations that resulted from the interviews and daily contact with the STPL facility. (1) The STPL is perceived as a valuable and almost indispensable service group within the organization. This comment was invariably made by everyone. Everyone also seemed to support the idea that the STPL continue to provide its current level of service and quality. (2) The STPL generally is not perceived to be a highly technically oriented group but rather as a provider of high quality photographic illustration and documentation services. In spite of the importance and high marks assigned to the STPL there are several observations that merit consideration and evaluation for possible inclusion into the STPL's scope of expertise and future operating practices. (1) While the care and concern for artistic rendition of subjects is seen as laudable and sometimes valuable, the time that this often requires is seen as interfering with keeping the tunnels operating at maximum productivity. Tunnel managers would like to shorten down-time due to photography, have services available during evening hours and on short notice. It may be of interest to the STPL that tunnel managers are incorporating ever greater imaging capabilities in their facilities. To some extent this could mean a reduced demand for traditional photographic services. (2) The photographic archive is seen as a Center resource. Archiving of images, as well as data, is a matter of concern to the investigators. The early holdings of the Photographic Archives are quickly deteriorating. The relative inaccessibility of the material held in the archives is problematic. (3) In certain cases delivery or preparation of digital image files instead of, or along with, hardcopy is already being perceived by the STPL's customers as desirable. The STPL should make this option available, and the fact that it has, or will have this capability widely known. (4) The STPL needs to continue to provide expert advice and technical imaging support in terms of application information to users of traditional photographic and new electronic imaging systems. Cooperative demo projects might be undertaken to maintain or improve the capabilities of the Lab. (5) STPL personnel do not yet have significant electronic imaging or electronic communication skills and improvements in this is an area could potentially have a positive impact on the Center. (6) High speed photographic or imaging services are often mentioned by the STPL as being of primary importance to their mission but the lab supports very few projects calling for high speed imaging services. Much high speed equipment is in poor state of repair. It is interesting to note that when the operation of lasers, digital imaging or quantitative techniques are requested these are directed to another NASA department. Could joint activities be initiated to solve problems? (7). The STPL could acquire more technical assignments if examples of the areas where they posses expertise would be circulated around the center. The fact that the STPL owns high speed video capability could be 'advertised' among its customer base if there truly was an interest in building up a customer base in this area. The STPL could participate in events like TOPS as an exhibitor, as well as a documenter, of the event.

Davidhazy, Andrew↗

Lessons learned from the introduction of autonomous monitoring to the EUVE science operations center

The University of California at Berkeley's (UCB) Center for Extreme Ultraviolet Astrophysics (CEA), in conjunction with NASA's Ames Research Center (ARC), has implemented an autonomous monitoring system in the Extreme Ultraviolet Explorer (EUVE) science operations center (ESOC). The implementation was driven by a need to reduce operations costs and has allowed the ESOC to move from continuous, three-shift, human-tended monitoring of the science payload to a one-shift operation in which the off shifts are monitored by an autonomous anomaly detection system. This system includes Eworks, an artificial intelligence (AI) payload telemetry monitoring package based on RTworks, and Epage, an automatic paging system to notify ESOC personnel of detected anomalies. In this age of shrinking NASA budgets, the lessons learned on the EUVE project are useful to other NASA missions looking for ways to reduce their operations budgets. The process of knowledge capture, from the payload controllers for implementation in an expert system, is directly applicable to any mission considering a transition to autonomous monitoring in their control center. The collaboration with ARC demonstrates how a project with limited programming resources can expand the breadth of its goals without incurring the high cost of hiring additional, dedicated programmers. This dispersal of expertise across NASA centers allows future missions to easily access experts for collaborative efforts of their own. Even the criterion used to choose an expert system has widespread impacts on the implementation, including the completion time and the final cost. In this paper we discuss, from inception to completion, the areas where our experiences in moving from three shifts to one shift may offer insights for other NASA missions.

Lewis, M.↗

OH/IR stars near the Galactic Center: Pulsation periods, luminosities, and polarimetry

17 stars in the direction of the Galactic Center, 15 of which are OH/IR stars, have been monitored at infrared wavelengths over a period of nearly eight years. Pulsation periods, bolometric luminosities, and light curves for 14 OH/IR stars are presented. The Galactic Center OH/IR stars range in luminosity between M(sub Bol) = -4.5 to M(sub Bol) = -6, implying main sequence progenitors with masses less than 3 solar mass. When compared to optically visible long period variables in the Large Magellanic Cloud (LMC) with similar bolometric luminosities, the Galactic Center OH/IR stars have pulsation periods on average 30% longer. This shift to longer periods is consistent with the current picture of late asymptotic giant branch evolution, placing the OH/IR stars in a phase immediately following the optically visible Mira variable phase during which the star dramatically increases its mass loss rate, becoming invisible at optical wavelength. Infrared polarimetry of 11 of the stars is also presented. The polarization for all of the stars is consistent with purely interstellar polarization, with little evidence for a significant intrinsic component. When compared to OH/IR stars in the galactic plane, the Galactic Center OH/IR stars appear similar in photometric characteristics, except none of the Galactic Center OH/IR stars shows the extremely thick dust shells or very high intrinsic polarization found in the more extreme galactic plane OH/IR stars.

Jones, Terry Jay↗