Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bubble dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

A Study of Cavitation-Ignition Bubble Combustion

We present the results of an experimental and computational study of the physics and chemistry of cavitation-ignition bubble combustion (CIBC), a process that occurs when combustible gaseous mixtures are ignited by the high temperatures found inside a rapidly collapsing bubble. The CIBC process was modeled using a time-dependent compressible fluid-dynamics code that includes finite-rate chemistry. The model predicts that gas-phase reactions within the bubble produce CO and other gaseous by-products of combustion. In addition, heat and mechanical energy release through a bubble volume-expansion phase are also predicted by the model. We experimentally demonstrate the CIBC process using an ultrasonically excited cavitation flow reactor with various hydrocarbon-air mixtures in liquid water. Low concentrations (< 160 ppm) of carbon monoxide (CO) emissions from the ultrasonic reactor were measured, and found to be proportional to the acoustic excitation power. The results of the model were consistent with the measured experimental results. Based on the experimental findings, the computational model, and previous reports of the "micro-diesel effect" in industrial hydraulic systems, we conclude that CIBC is indeed possible and exists in ultrasonically- and hydrodynamically-induced cavitation. Finally, estimates of the utility of CIBC process as a means of powering an idealized heat engine are also presented.

Nguyen, Quang-Viet↗

Cryogenic liquid level measuring probe

Universal probe, which contains a unique frequency discriminator, measures the static and dynamic levels of cryogenic liquids in a hydrogen bubble chamber. The probe allows boiling conditions or other turbulence to be observed throughout all the transition stages.

Dinkel, J. A.↗

Dynamic centering of liquid shells

The moderate-amplitude axisymmetric oscillations of an inviscid liquid shell surrounding an incompressible gas bubble are calculated by a multiple-time-scale expansion for initial deformations composed of two-lobed perturbations of the shell and a displacement of the bubble from the center of mass of the liquid. Two types of small-amplitude motion are identified and lead to very different nonlinear dynamic interactions, as described by the results valid up to second order in the amplitude of the initial deformation. In the 'bubble mode', the oscillations of the captive bubble and the liquid shell are exactly in phase and the bubble vibrates about its initial eccentric location. The bubble moves toward the center of the drop when the shell is perturbed into a 'sloshing mode' of oscillation where both interfaces move out of phase. These results explain the centering of liquid shells observed in several experiments.

Tsamopoulos, John A.↗

CFD validation experiments at UTRC

Wind tunnel tests are performed in order to validate a computational fluid dynamics code. A large scale, two dimensional separation bubble is created on a flat plate, and low speed, turbulent flow is used. Extensive data sets are obtained with a nonintrusive laser velocimeter in addition to wall static pressure, total pressure, and hot-film measurements. All data and results are presented in a viewgraph format.

Patrick, William P.↗

Sunspots and the physics of magnetic flux tubes. X - On the hydrodynamic instability of buoyant fields

The hydrodynamics of cylindrical buoyant bubbles (magnetic flux tubes) in an atmosphere is examined. Their dynamical stability is considered, with particular attention to the Rayleigh-Taylor and Kelvin-Helmholtz instabilities. The instabilities are sufficient to cause fragmentation in the absence of some strong stabilizing effect such as surface tension or an internal azimuthal magnetic field. The results of the stability analysis are first applied to rising gas bubbles in liquids. Then, since agreement with the experimental data is found, the results are applied to the similar problem of the rising magnetic flux in the sun. Magnetic flux tubes in a fluid velocity field are intrinsically unstable, unless twisted. With the known dynamical limits on the degree of twisting, an upper limit on the diameter of the order of a few hundred kilometers is found for the stability of individual flux tubes in the photosphere. Observations show that tubes, except when clustered to form sunspots, are generally not larger than this amount. Therefore, it is suggested that the hydrodynamic instability of larger tubes is a prime cause of their absence from the solar photosphere.

Tsinganos, K. C.↗

Dynamic stall experiments on oscillating airfoils

Dynamic stall and unsteady boundary layer separation have been studied in incompressible flow at moderately large Reynolds numbers. By varying the leading-edge geometry of an NACA 0012 airfoil, three different types of stall were produced. For most of the configurations studied, including the basic NACA 0012 profile, dynamic stall was found not to originate with the bursting of a leading-edge laminar separation bubble, as is commonly believed. Instead, the vortex shedding phenomenon, which is the predominant feature of dynamic stall, appears to be fed its vorticity by the breakdown of the turbulent boundary layer.

Mccroskey, W. J.↗

Drop dynamics in space

Experiments to study the dynamics of liquid drops are being planned to be performed in the weightless environment of Spacelab. The liquids will range from superfluid helium through ordinary liquid to molten metals and glasses. The experiments will be conducted in a chamber now being developed which utilizes the forces and torques produced by acoustic waves excited within the chamber. None of the currently available facilities (drop towers, sounding rockets, or zero-g aircraft flights) can provide a sustained weightless environment, since the resulting zero-g periods are from 3 sec to 5 min. Spaceflight, however, will provide weightlessness for periods of one week, or more, allowing truly laboratory-like experiments to be conducted on free liquid drops and bubbles. In this paper we discuss both the drop dynamics experiments proposed for Spacelab and the acoustic chamber: its operation and current testing for these and other experiments.

Wang, T. G.↗

Interface stability in a slowly rotating low-gravity tank Theory

The equilibrium configuration of a bubble in a rotating liquid confined by flat axial boundaries (baffles) is found. The maximum baffle spacing assuring bubble confinement is bounded from above by the natural length of a bubble in an infinite medium under the same conditions. Effects of nonzero contact angle are minimal. The problem of dynamic stability is posed. It can be solved in the limit of rapid rotation, for which the bubble is a long cylinder. Instability is to axisymmetric perturbations; nonaxisymmetric perturbations are stable. The stability criterion agrees with earlier results.

Gans, R. F.↗

Dendrites, viscous fingers, and the theory of pattern formation

Recent developments in the theory of pattern formation in dendritic crystal growth and viscous fingering in fluids are reviewed. Consideration is given to the discovery that weak capillary forces act as singular perturbations which lead to selection mechanisms in dendritic crystal growth and fingering patterns. Other topics include the conventional thermodynamic model of the solidification of a pure substance from its melt, fingering instability, pattern selection, the solvability theory, dendritic growth rates, the bubble effect discovered by Couder et al. (1986), the dynamics of pattern-forming systems, and snowflake formation.

Langer, J. S.↗

In-Situ Measurement of the Height of Condensed Water in Steam Pipes with Dynamic Flow

A method based on the use of enhanced filtered Hilbert envelope of the wave signal was developed in order to monitor the height of condensed water through the wall of steam pipes having dynamic flow conditions. A prototype testbed was designed and fabricated in this study to simulate the dynamic flow conditions including the air stream flowing above the water and bubble induced disturbance. A dual-transducer was used to perform the test as a basis for the multiple transducers system to facilitate the detectability and reliability for long term monitoring of the condensed water height in dynamic conditions. The results demonstrated that the method of measuring the water height using multiple-transducer system employing the developed novel signal processing technique is an efficient and accurate tool for practical applications.

water level in pipe↗

Noncoeval star formation, starbursts, and the growth of supershells in Ob associations

There is strong evidence that the epoch of massive-star formation in OB associations is spread over intervals of 10-20 Myr as a result of subclustering, continuous or sequential star formation, or delayed collapse of the most massive stars. The growth of supershells is strongly influenced by this star formation history and by mass deposition to the hot bubble interior ('radiative poisoning'). Even in cases of coeval or continuous star formation, the rising energy input from massive stars, as they evlolve off the main sequence, may be observed as a 'starburst' with peak energy deposition 3-10 times that of the late-time rate due to supernovae and an excess of Wolf-Rayet stars (WR/O ratio approximately equal 0.1). The peak in energy deposition results in faster shell growth and velocity evolution than in constant-luminosity models. At finite bubble ages, this mechanism can alter the covering factor of superbubbles in the disk by factors of 2-3 and can accelerate the dynamical effects of galactic 'superwinds.' In contrast, if sufficient matter is entrained in the hot bubble, radiative poisoning will stall its growth.

Shull, J. Michael↗

On the mechanism of dynamic stall.

The sequence of events comprising dynamic stall of an airfoil is discussed, with emphasis on the role of the leading edge laminar separation bubble and shed vortex. A simple bubble model, based on a combination of theoretical and experimental investigations, is used to discuss the events prior to the shedding of the vortex, and provides the basis for a heuristic estimate of the delay in the occurrence of dynamic stall on a pitching airfoil. The evidence for the existence and dominant effect of the leading edge vortex on the dynamic stall required (but in most cases not presently available) for the prediction of the effects of stall on helicopter rotor blades are discussed. It is the intention of this paper to focus attention on the laminar separation bubble and the shed leading edge vortex as the dominant features of the dynamic stall mechanism in the hope of stimulating greater emphasis on these features in future dynamic stall research.

Johnson, W.↗

Compressibility effects on dynamic stall of airfoils undergoing rapid transient pitching motion

The research was carried out in the Compressible Dynamic Stall Facility, CDSF, at the Fluid Mechanics Laboratory (FML) of NASA Ames Research Center. The facility can produce realistic nondimensional pitch rates experienced by fighter aircraft, which on model scale could be as high as 3600/sec. Nonintrusive optical techniques were used for the measurements. The highlight of the effort was the development of a new real time interferometry method known as Point Diffraction Interferometry - PDI, for use in unsteady separated flows. This can yield instantaneous flow density information (and hence pressure distributions in isentropic flows) over the airfoil. A key finding is that the dynamic stall vortex forms just as the airfoil leading edge separation bubble opens-up. A major result is the observation and quantification of multiple shocks over the airfoil near the leading edge. A quantitative analysis of the PDI images shows that pitching airfoils produce larger suction peaks than steady airfoils at the same Mach number prior to stall. The peak suction level reached just before stall develops is the same at all unsteady rates and decreases with increase in Mach number. The suction is lost once the dynamic stall vortex or vortical structure begins to convect. Based on the knowledge gained from this preliminary analysis of the data, efforts to control dynamic stall were initiated. The focus of this work was to arrive at a dynamically changing leading edge shape that produces only 'acceptable' airfoil pressure distributions over a large angle of attack range.

Chandrasekhara, M. S.↗

Selection of a surface tension propellant management system for the Viking 75 Orbiter.

Discussion of the propellant management system requirements derived for the Viking 75 mission, and review of a series of surface tension propellant management system design concepts. The chosen concept is identified and its mission operation described. The ullage bubble and bulk liquid positioning characteristics are presented, along with propellant dynamic considerations entailed by thrust initiation/termination. Pressurization design considerations, required to assure minimum disturbance to the bulk propellant, are introduced as well as those of the tank ullage vent. Design provisions to assure liquid communication between tank ends are discussed. Results of a preliminary design study are presented, including mechanical testing requirements to assure structural integrity, propellant compatibility, and proper installation.

Dowdy, M. W.↗

Planetary environments and the conditions of life

Geophysical models of the first 600 Ma ofthe earth's history following accretion and core formation point to a period of great environmental disequilibrium. In such an environment, the passage of energy from the earth's interior and from the sun through gas-liquid-solid domains and their boundaries with each other generated a dynamically interacting, complex hierarchy of self-organized structures ranging from bubbles at the sea-air interface to tectonic plates. The ability of a planet to produce such a hierarchy is speculated to be a prerequisite to the origin and sustenance of life. The application of this criterion to Mars argues against the origin of Martian life.

Chang, S.↗

Fully Threaded Tree for Adaptive Refinement Fluid Dynamics Simulations

A fully threaded tree (FTT) for adaptive refinement of regular meshes is described. By using a tree threaded at all levels, tree traversals for finding nearest neighbors are avoided. All operations on a tree including tree modifications are O(N), where N is a number of cells, and are performed in parallel. An efficient implementation of the tree is described that requires 2N words of memory. A filtering algorithm for removing high frequency noise during mesh refinement is described. A FTT can be used in various numerical applications. In this paper, it is applied to the integration of the Euler equations of fluid dynamics. An adaptive mesh time stepping algorithm is described in which different time steps are used at different l evels of the tree. Time stepping and mesh refinement are interleaved to avoid extensive buffer layers of fine mesh which were otherwise required ahead of moving shocks. Test examples are presented, and the FTT performance is evaluated. The three dimensional simulation of the interaction of a shock wave and a spherical bubble is carried out that shows the development of azimuthal perturbations on the bubble surface.

FINITE ELEMENT ANALYSIS↗

Dynamics of rotating and oscillating free drops

The Dynamics of Rotating and Oscillating Free Drops (DROP) experiment is to be performed using the Drop Dynamics Module (DDM). The main scientific objectives of the DROP experiment are the study of the equilibrium figures of a rotating drop and the study of the large-amplitude oscillations of a liquid drop. The objective of the DROP experiment in relation to the DDM is to establish the advantages of conducting future drops and bubbles experiments in space. The DROP experiment will be subjected to continual to ensure that the experiments are scientifically current and available. The two component experiments (rotation and oscillation) of the DROP experiment have been chosen as the simplest experiments representative of the entire class of drop dynamics experiments. The component experiment on the equilibrium shapes of a rotating liquid drop of a simple liquid is not only an important and interesting experiment in its own right, but is also the simplest gyrostatic experiment that can be performed. In later experiments, more complicated liquids can be used; bubbles can be included; and the dynamics of rotating drops can be studied. This experiment, as it now stands, is an important exercise of the module's ability to provide drop rotation and the requisite science data.

Wang, T. G.↗