Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bio-inspired process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nature-inspired lotus-shaped fins combined with hybrid nanoparticles and metal foam for high-performance latent heat thermal energy storage

Latent heat thermal energy storage (LHTES) systems play a critical role in renewable energy integration by providing high energy density and nearly isothermal operation during phase transitions. However, their performance is often limited by slow melting/charging rates, which motivates the search for enhanced heat transfer designs. This study investigates the melting behavior of RT-82 phase change material (PCM) using novel lotus-shaped fins combined with copper metal foam and conductive graphene nanoparticles and carbon nanotubes. A two-dimensional enthalpy-porosity model in ANSYS Fluent was developed to simulate the charging/melting process, capturing non-thermal equilibrium between the foam and PCM/nano-PCM. In this study, effects of fin geometry, nanoparticle concentration, and foam porosity on melting dynamics and cost-performance trade-offs were investigated. Results showed that natural convection accelerated melting by ~12% compared to conduction-only scenarios. Optimized lotus-shaped fins with higher fin density (T3F4 and T3F10) achieved up to 63% faster melting relative to sparse configurations. Graphene nanoparticles improved thermal conductivity, with a 6% volume fraction, by reducing melting time by ~6.9%, while their combination with 75% porosity foam achieved a maximum reduction in the melting time of ~51% compared to pure PCM. Cost-performance analysis identified T3F4 as the most balanced design, offering rapid thermal response without excessive material costs, while moderate-density designs like T3S6 provided economical alternatives with acceptable performance. These results highlight the performance enhancement that can be achieved by integrating bio-inspired fins, nanoparticles, and foams, into compact and efficient LHTES for solar heating, building thermal management, and industrial waste-heat recovery applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Allosteric control of electron transfer in nitrogenase and nitrogenase-like enzymes (Final Report)

More than a third of all known proteins to date are either oxidoreductases or metalloproteins. The diversity of metal cofactors and redox centers in these proteins make them attractive candidates for engineering protein-based biocatalysts, biosensors, and biofuel cells, among other necessary tools for the bioeconomy. Many of these enzymes function as large multi-subunit complexes arranged as symmetric or asymmetric assemblies, and the purpose of this architecture is unclear. The goal of the project was to address this fundamental question by investigating the mechanism of action of two oxidoreductases: Nitrogenase and DPOR (Dark-Operative Protochlorophyllide Oxidoreductase, a nitrogenase-like oxidoreductase). Nitrogenase and DPOR play key roles in nitrogen fixation and photosynthesis, processes essential to sustaining life. Both proteins are arranged as two symmetrical halves with each half capable of substrate reduction. For more than half a century, substrate reduction by nitrogenase has been presumed to occur independently within the two identical halves. Funded by this DOE grant we have now shown that both nitrogenase and DPOR function asymmetrically. Electron transfer in one half suppresses activity in the other. Thus, we have demonstrated that the two halves do not function in an independent manner; rather, catalytic events in one-half allosterically suppress activity and electron transfer (ET) in the other. This alternating-site mechanism has significant implications on our current understanding of substrate reduction by these enzymes and offers a new mechanistic paradigm for the reactions they catalyze. Our work now provides a mechanistic map of the how the two symmetric catalytic halves work together to establish and maintain the sequential-site mechanism through multiple ET cycles to achieve substrate reduction. There is substantive need for bio-inspired tools that enable reduction of nitrogen and other substrates, as well as photosynthesis, for energy and food production. Understanding the workings of enzymes like nitrogenase and DPOR that mediate multi-electron redox chemistry is vital for designing such synthetic tools. The timing of our research coincides with the biotechnological breakthrough of light-driven artificial N2 reduction by nitrogenase, achieved using the native enzyme with both halves arranged in a mirror-like architecture as catalyst. Together with such discoveries, our research now reveal unknown facets of the reaction mechanism and hold promise for designing more effective catalysts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A decision support tool for e-waste recycling operations using the hen-and-chicks bio-inspired optimization metaheuristic

E-waste from end-of-life electrical and electronic devices is one of the fastest growing waste streams from households and businesses. E-waste recycling yields environmental sustainability and economic benefits. Due to continuous changes in e-waste types and compositions, recycling businesses face challenges to optimize their operational configuration to achieve better economic and environmental performance. To help e-waste recyclers mitigate this problem, we have developed a modular decision support tool called the Comprehensive Manufacturing Assessment Tool (CMAT) that can simulate both e-waste recycling operations and economics. This tool can give valuable insights regarding the profitability of the entire operation and different e-waste types. In addition, a new bio-inspired metaheuristic optimization algorithm, hen-and-chicks optimization (HACO), was developed to assign manpower to different workstations to maximize operational efficiencies. According to the results of our case study, laptops, desktops, and computer peripherals are the three electronic waste products that produce the most profit. Our examination of the sensitivity of material prices shows that the price of steel has the most significant influence on total profit, because it is the most widely used material in the majority of electronic devices. We have released the decision support tool as open-source software under a general public license. It could be customized for other recycling industries beyond e-waste to achieve business sustainability by making their operations more efficient.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2021

Bioinspired Honeycomb Core Design: An Experimental Study of the Role of Corner Radius, Coping, and Interface

The honeybee’s nest has inspired the design of engineering honeycomb core that primarily abstract the hexagonal cell shape and exploit its mass minimizing properties to construct lightweight panels. This work explored three additional design features that are part of the natural honeybee comb but have not been traditionally considered as design features of interest in honeycomb design: the radius at the corner of each cell, the coping at the top of the cell walls, and the interface between cell arrays. These features were first characterized in natural honeycomb using optical and X-ray techniques, and then incorporated into honeycomb core design, and fabricated using an additive manufacturing process. The honeycomb cores were then tested in out-of-plane compression and bending, and since all three design features added mass to the overall structure, all metrics were examined per unit mass to assess performance gains. The study concluded that the addition of an interface increases specific flexural modulus but has little benefit in out-of-plane compression; coping radius positively impacts specific flexural strength; but that the corner radius has no significant effect in bending, and actually is slightly detrimental for out-of-plane compression testing.

honeycomb↗
DOE OSTI2018

Self-Repair of Structure and Bioactivity in a Supramolecular Nanostructure

Supramolecular nanostructures formed through self-assembly can have energy landscapes, which determine their structures and functions depending on the pathways selected for their synthesis and processing and on the conditions they are exposed to after their initial formation. We report here on the structural damage that occurs in supramolecular peptide amphiphile nanostructures, during freezing in aqueous media, and the self-repair pathways that restore their functions. We found that freezing converts long supramolecular nanofibers into shorter ones, compromising their ability to support cell adhesion, but a single heating and cooling cycle reverses the damage and rescues their bioactivity. Thermal energy in this cycle enables noncovalent interactions to reconfigure the nanostructures into the thermodynamically preferred long nanofibers, a repair process that is impeded by kinetic traps. In addition, we found that nanofibers disrupted during freeze-drying also exhibit the ability to undergo thermal self-repair and recovery of their bioactivity, despite the extra disruption caused by the dehydration step. Following both freezing and freeze-drying, which shorten the 1D nanostructures, their self-repair capacity through thermally driven elongation is inhibited by kinetically trapped states, which contain highly stable noncovalent interactions that are difficult to rearrange. These states decrease the extent of thermal nanostructure repair, an observation we hypothesize applies to supramolecular systems in general and is mechanistically linked to suppressed molecular exchange dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Nanoporous Delafossite CuAlO 2 from Inorganic/Polymer Double Gels: A Desirable High-Surface-Area p-Type Transparent Electrode Material

Nanoporous structures of a p-type semiconductor, delafossite CuAlO2, with a high crystallinity have been fabricated through an inorganic/polymer double-gel process and characterized for the first time via Mott–Schottky measurements. The effect of the precursor concentration, calcination temperature, and atmosphere were examined to achieve high crystallinity and photoelectrochemical properties while maximizing the porosity. The optical properties of the nanoporous CuAlO2 are in good agreement with the literature with an optical band gap of 3.9 eV, and the observed high electrical conductivity and hole concentrations conform to highly crystalline and well-sintered nanoparticles observed in the product. The Mott–Schottky plot from the electrochemical impedance spectroscopy studies indicates a flat-band potential of 0.49 V versus Ag/AgCl. It is concluded that CuAlO2 exhibits band energies very close to those of NiO but with electrical properties very desirable in the fabrication of photoelectrochemical devices including dye-sensitized solar cells.

36 MATERIALS SCIENCE↗
NASA NTRS2018

Biocene 2018 - Welcome to the Period of New Life

Biocene is the period of new life. When our descendants look back at this period in time, they will see evidence, in the geologic and electronic record, of anthropic climate change, growing population, and scarcity of resources. But they will also see the rebirth of human ingenuity as we overcame the challenges that faced us through nature-inspired exploration. The Periodic Table of Life (PeTaL) is a proposed tool and open source framework that uses artificial intelligence to aid in the systematic inquiry of biology for its application to human systems. This presentation defines the PeTaL concept and workflow. Biomimicry, biophysics, biomimetics, bionics and numerous other terms refer to the use of biology and biological principles to inform practices in other disciplines. For the most part, the domain of inquiry in these fields have been confined to extant biological models with the proponents of biomimicry often citing the evolutionary success of extant organisms relative to extinct ones. The primary objective of this paper is to expand the domain of inquiry for human processes that seek to model those that are, were or could be found in nature with examples that relate to the field of aerospace and to spur development of tools that can work together to accelerate the use of artificial intelligence in problem solving. Specifically specialized fields such as paleomimesis, anthropomimesis and physioteleology are proposed in conjunction with artificial evolution. Blockchain technology may be vital in allowing open source design tools such as PeTaL to democratize design and yet protect intellectual property. The overarching philosophy outlined here can be thought of as physiomimetics, a holistic and systematic way of learning from natural history. The backbone of PeTaL integrates an unstructured database with an ontological model consisting of function, morphology, environment, state of matter and ecosystem. Tools include text classification, thesaurus, data visualization, and analysis. Applications of PeTaL include guiding human space exploration, understanding human and geological history, and discovering new or extinct life.

Biocene↗
DOE OSTI2025

Closed-Loop Control of Active Nematic Flows

Stabilizing and shaping autonomous flows of active fluids is a fundamental challenge and a prerequisite for applications. We embed a light-responsive microtubule-based nematic in a proportional-integral control loop that adjusts the applied light intensity in response to real-time measurements of the spatially averaged flow speed. The self-regulating hardware-software-wetware system maintains a target flow speed against external or internal perturbations, including protein aging and aggregation, sample-to-sample variability, and temperature variation. Varying the controller’s gains reveals antagonistic roles between feedback and intrinsic processes, leading to nontrivial dynamics observed in fluctuation spectra. In particular, oscillations emerge from the interplay between the controller, motor binding kinetics, and active hydrodynamic relaxation. Accounting for the underlying binding timescale, our coarse-grained model and nematohydrodynamics simulations corroborate these observations. This work provides insight into the coupled dynamics of controlled active matter, laying the foundation for spatiotemporal patterning of active stress to generate and stabilize new dynamical configurations.

Active nematics↗
DOE OSTI2025

Morphogenic Growth 3D Printing

Inspired by nature's morphogenesis, a new 3D printing process –growth printing (GP)– takes advantage of a self‐propagating curing front to produce 3D polymeric parts following a growth‐like development plan. The propagation of the curing front is driven by the exothermic polymerization of dicyclopentadiene (DCPD), which transforms the liquid resin into a stiff polymer as it propagates at 1 mm s −1 . GP is triggered when a heated initiator contacts the uncured liquid resin in an open container. The initiator nucleates the frontal polymerization reaction and the isotropic radial propagation of the growth front. Simultaneously, the initiator is moved up across the free surface of the resin, pulling the cured object out of the uncured resin. The motion trajectory of the initiator with respect to the free resin surface controls the growth morphology of the 3D part. An inverse design algorithm is developed to produce 3D parts by modeling the reaction‐diffusion‐driven solidification process. This process has substantial energy savings and high printing speeds.

3D printing↗
DOE OSTI2018

Rational Design of Mononuclear Iron Porphyrins for Facile and Selective 4e-/4H+ O2 Reduction: Activation of O-O Bond by 2nd Sphere Hydrogen Bonding

Facile and selective 4e-/4H+ electrochemical reduction of O2 to H2O in aqueous medium has been a sought-after goal for several decades. Elegant but synthetically demanding cytochrome c oxidase mimics have demonstrated selective 4e-/4H+ electrochemical O2 reduction to H2O is possible with rate constants as fast as 105 M-1 s-1 under heterogeneous conditions in aqueous media. Over the past few years, in situ mechanistic investigations on iron porphyrin complexes adsorbed on electrodes have revealed that the rate and selectivity of this multielectron and multiproton process is governed by the reactivity of a ferric hydroperoxide intermediate. The barrier of O-O bond cleavage determines the overall rate of O2 reduction and the site of protonation determines the selectivity. In this report, a series of mononuclear iron porphyrin complexes are rationally designed to achieve efficient O-O bond activation and site-selective proton transfer to effect facile and selective electrochemical reduction of O2 to water. Indeed, these crystallographically characterized complexes accomplish facile and selective reduction of O2 with rate constants >107 M-1 s-1 while retaining >95% selectivity when adsorbed on electrode surfaces (EPG) in water. These oxygen reduction reaction rate constants are 2 orders of magnitude faster than all known heme/Cu complexes and these complexes retain >90% selectivity even under rate determining electron transfer conditions that generally can only be achieved by installing additional redox active groups in the catalyst.

Bhunia, Sarmistha↗
DOE OSTI2019

Crystal engineering with DNA

This Review chronicles over two decades of research into creating a genetic code for crystal engineering. Rather than directing biological processes, this code uses synthetic forms of DNA to programme the assembly of nanoparticles and microparticles into 1D, 2D and 3D crystalline architectures, in which almost every aspect of the resultant structures can be systematically controlled. Within this conceptual framework, the structural and functional advances are described in an effort to define the present level of sophistication and to predict future directions of the platform. These advances include exotic structures with programmable lattice symmetries and well-defined crystal habits, responsive materials that leverage the intrinsic properties of nucleic acids to manipulate structures on demand, nanoparticle superlattices grown epitaxially from surfaces and colloidal crystals that offer insights into light–matter interactions. Looking forward, we challenge the community to leverage the extraordinary structural control afforded by crystal engineering with DNA to synthesize classes of functional materials that push beyond what has been possible with naturally occurring crystalline materials or those made by more conventional strategies.

catalysis (homogeneous), solar (photovoltaic), bio↗
DOE OSTI2019

Patterning non-equilibrium morphologies in stimuli-responsive gels through topographical confinement

Stimuli-responsive “smart” polymers have generated significant interest for introducing dynamic control into the properties of antifouling coatings, smart membranes, switchable adhesives and cell manipulation substrates. Switchable surface morphologies formed by confining stimuli-responsive gels to topographically structured substrates have shown potential for a variety of interfacial applications. Beyond patterning the equilibrium swelling behavior of gels, subjecting stimuli-responsive gels to topographical confinement could also introduce spatial gradients in the various timescales associated with gel deformation, giving rise to novel non-equilibrium morphologies. In this work, we show how by curing poly(N-isopropylacrylamide) (pNIPAAm)-based gel under confinement to a rigid, bumpy substrate, we can not only induce the surface curvature to invert with temperature, but also program the transient, non-equilibrium morphologies that emerge during the inversion process through changing the heating path. Finite element simulations show that the emergence of these transient morphologies is correlated with confinement-induced gradients in polymer concentration and position-dependent hydrostatic pressure within the gel. To illustrate the relevance of such morphologies in interfacial applications, we show how they enable us to control the gravity-induced assembly of colloidal particles and microalgae. Finally, we show how more complex arrangements in particle assembly can be created through controlling the thickness of the temperature-responsive gel over the bumps. Patterning stimuli-responsive gels on topographically-structured surfaces not only enables switching between two invertible topographies, but could also create opportunities for stimuli ramp-dependent control over the local curvature of the surface and emergence of unique transient morphologies. Harnessing these features could have potential in the design of multifunctional, actuatable materials for switchable adhesion, antifouling, cell manipulation, and liquid and particle transport surfaces.

42 ENGINEERING↗
DOE OSTI2015

A Versatile Click-Compatible Monolignol Probe to Study Lignin Deposition in Plant Cell Walls

Here, lignin plays important structural and functional roles in plants by forming a hydrophobic matrix in secondary cell walls that enhances mechanical strength and resists microbial decay. While the importance of the lignin matrix is well documented and the biosynthetic pathways for monolignols are known, the process by which lignin precursors or monolignols are transported and polymerized to form this matrix remains a subject of considerable debate. In this study, we have synthesized and tested an analog of coniferyl alcohol that has been modified to contain an ethynyl group at the C-3 position. This modification enables fluorescent tagging and imaging of this molecule after its incorporation into plant tissue by click chemistry-assisted covalent labeling with a fluorescent azide dye, and confers a distinct Raman signature that could be used for Raman imaging. We found that this monolignol analog is incorporated into in vitro -polymerized dehydrogenation polymer (DHP) lignin and into root epidermal cell walls of 4-day-old Arabidopsis seedlings. Incorporation of the analog in stem sections of 6-week-old Arabidopsis thaliana plants and labeling with an Alexa-594 azide dye revealed the precise locations of new lignin polymerization. Results from this study indicate that this molecule can provide high-resolution localization of lignification during plant cell wall maturation and lignin matrix assembly.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Cellulose synthase interactive1- and microtubule-dependent cell wall architecture is required for acid growth in Arabidopsis hypocotyls

Auxin-induced cell elongation relies in part on the acidification of the cell wall, a process known as acid growth that presumably triggers expansin-mediated wall loosening via altered interactions between cellulose microfibrils. Cellulose microfibrils are a major determinant for anisotropic growth and they provide the scaffold for cell wall assembly. Little is known about how acid growth depends on cell wall architecture. To explore the relationship between acid growth-mediated cell elongation and plant cell wall architecture, two mutants (jia1-1 and csi1-3) that are defective in cellulose biosynthesis and cellulose microfibril organization were analyzed. The study revealed that cell elongation is dependent on CSI1-mediated cell wall architecture but not on the overall crystalline cellulose content. We observed a correlation between loss of crossed-polylamellate walls and loss of auxin- and fusicoccin-induced cell growth in csi1-3. Furthermore, induced loss of crossed-polylamellate walls via disruption of cortical microtubules mimics the effect of csi1 in acid growth. We hypothesize that CSI1- and microtubule-dependent crossed-polylamellate walls are required for acid growth in Arabidopsis hypocotyls.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

DOE BES: Directed Assembly of Bio-inspired Supramolecular Materials for Energy Transport and Capture: Mesoscale Construction of Functional Materials in Hydrodynamic Flows. Final Project Report

The precise engineering of mesoscale structures based on molecular building blocks holds enormous promise to catalyze the development of new functional materials for advanced energy technologies. Bio-inspired and synthetic/bio-hybrid systems can play a key role in this effort due to their inherent programmable function and high degrees of sequence control. Despite recent progress, the ability to precisely control the supramolecular assembly of bio-hybrid molecules remains a central problem in the field. Our research aims to fundamentally understand the assembly mechanism of bio-hybrid materials, specifically focusing on sequence-controlled synthetic pi-conjugated oligopeptides. Moreover, we aim to develop new methods for the directed assembly of materials based on tailored fluid flows to guide the emergent structural, optical, and electronic properties of synthetic pi-conjugated peptides. Overall, our team has made substantial progress on this project through four major Thrusts: (1) Understanding the role of kinetics on the assembly process of synthetic π-conjugated peptides. (2) Probing the role of chemistry on the structural properties of these materials. (3) Real-time in situ investigation of the sol-gel transition and assembly of π-conjugated peptides. (4) Achieving large-area macroscopic alignment and assembly of these materials. In the following report, we explain major research progress in each of these research Thrusts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Dynamical Self-Assembly: Constrained phase separation and mesoscale dynamics in lipid membranes (Final Report)

This final technical report summarizes scientific and technical achievements derived through the the award, DE-FG02-04ER46173 [2013-2016, 2016-2017, and 2017-2018(NCE)], for the grant proposal titled, “Dynamical Self-Assembly: Constrained phase separation and mesoscale dynamics in lipid membranes.” The effort was organized into three major scientific aims: (1) characterize the mechanism of inter-layer coupling of laterally phase-separated domains in stacked lipid bilayers; (2) characterize curvature-dependent dynamic reorganization in membrane milieu; and (3) characterize real-time effects of mechanochemical perturbations on lateral phase separation membrane bilayers. The cumulative weight of the activities, including experimental research and collaborative modeling, disseminated through the publications listed above and presentations, has addressed two over-arching objectives: (a) to abstract a physical science based understanding of fundamental rules that determine dynamic self-assembly processes in lipid bilayer membranes - a versatile class of biologically inspired interfacial complex fluids and (b) to translate these physical principles into quantitative design rules for the development of new classes of membrane-based complex materials that exhibit complex, co-operative, and adaptive behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Maturation of Rhodobacter capsulatus Multicopper Oxidase CutO Depends on the CopA Copper Efflux Pathway and Requires the cutF Product (Final Report)

The goal is to achieve a comprehensive understanding of the nature, mechanism of function and biogenesis of c-type cytochromes and their oligomeric complexes. These cytochrome are ubiquitous heme proteins that are required for cellular bioenergetics, including photosynthesis (Ps) and respiration (Res), which are central to chemical energy (ATP) production by oxidative- and photophosphorylation. We contribute to the molecular characterization of individual and membrane-integral cytochromes as parts of Ps and Res electron transport (ET) pathways, using the facultative phototrophic bacteria of as excellent models for multidisciplinary investigations. Supported by this grant we discovered novel membrane-bound cytochromes and cyts c complexes that are important for Ps- and Res-ET. We worked out their biogenesis including maturation (covalent heme addition) and assembly of mature subunits into complexes. These involve fundamental process found virtually in all organisms and are fundamental processes with major significance to the “Photosynthetic Systems” program of DOE-BES, because the cytochromes are integral components of natural energy production systems. Elucidation of basic principles, and the knowledge gained by their study greatly impact on our ability to design, engineer, and create new natural, bio-hybrid, bio-inspired and artificial systems to better capture light, transduce and store its energy with improved efficacy and are of broad significance.

14 SOLAR ENERGY↗
NASA NTRS2004

Adaptive Bio-Inspired Wireless Network Routing for Planetary Surface Exploration

Wireless mobile networks suffer connectivity loss when used in a terrain that has hills, and valleys when line of sight is interrupted or range is exceeded. To resolve this problem and achieve acceptable network performance, we have designed an adaptive, configurable, hybrid system to automatically route network packets along the best path between multiple geographically dispersed modules. This is very useful in planetary surface exploration, especially for ad-hoc mobile networks, where computational devices take an active part in creating a network infrastructure, and can actually be used to route data dynamically and even store data for later transmission between networks. Using inspiration from biological systems, this research proposes to use ant trail algorithms with multi-layered information maps (topographic maps, RF coverage maps) to determine the best route through ad-hoc network at real time. The determination of best route is a complex one, and requires research into the appropriate metrics, best method to identify the best path, optimizing traffic capacity, network performance, reliability, processing capabilities and cost. Real ants are capable of finding the shortest path from their nest to a food source without visual sensing through the use of pheromones. They are also able to adapt to changes in the environment using subtle clues. To use ant trail algorithms, we need to define the probability function. The artificial ant is, in this case, a software agent that moves from node to node on a network graph. The function to calculate the fitness (evaluate the better path) includes: length of the network edge, the coverage index, topology graph index, and pheromone trail left behind by other ant agents. Each agent modifies the environment in two different ways: 1) Local trail updating: As the ant moves between nodes it updates the amount of pheromone on the edge; and 2) Global trail updating: When all ants have completed a tour the ant that found the shortest route updates the edges in its path.

Alena, Richard I.↗