SEARCH · Engineering Papers

Results for “bilayer films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Phonon‐Dominated Energy Transport in Purely Metallic Heterostructures

Abstract Ultrafast X‐ray diffraction is used to quantify the transport of energy in laser‐excited nanoscale gold–nickel (Au–Ni) bilayers. Electron transport and efficient electron–phonon coupling in Ni convert the laser‐deposited energy in the conduction electrons within a few picoseconds into a strong non‐equilibrium between hot Ni and cold Au phonons at the bilayer interface. Modeling of the subsequent equilibration dynamics within various two‐temperature models confirms that for ultrathin Au films, the thermal transport is dominated by phonons instead of conduction electrons because of the weak electron–phonon coupling in Au.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Degradation Mechanism Due to Water Ingress Effect on the Top Contact of Cu(In,Ga)Se2 Solar Cells

The impact of moisture ingress on the surface of copper indium gallium diselenide (CIGS) solar cells was studied. While industry-scale modules are encapsulated in specialized polymers and glass, over time, the glass can break and the encapsulant can degrade. During such conditions, water can potentially degrade the interior layers and decrease performance. The first layer the water will come in contact with is the transparent conductive oxide (TCO) layer. To simulate the impact of this moisture ingress, complete devices were immersed in deionized water. To identify the potential sources of degradation, a common window layer for CIGS devices—a bilayer of intrinsic zinc oxide (i-ZnO) and conductive indium tin oxide (ITO)—was deposited. The thin films were then analyzed both pre and post water soaking. To determine the extent of ingress, dynamic secondary ion mass spectroscopy (SIMS) was performed on completed devices to analyze impurity diffusion (predominantly sodium and potassium) in the devices. The results were compared to device measurements, and indicated a degradation of device efficiency (mostly fill factor, contrary to previous studies), potentially due to a modification of the alkali profile.

14 SOLAR ENERGY↗

DOE OSTI2024

Direct Synthesis of Layer-Tunable and Transfer-Free Graphene on Device-Compatible Substrates Using Ion Implantation Toward Versatile Applications

Direct synthesis of layer-tunable and transfer-free graphene on technologically important substrates is highly valued for various electronics and device applications. State of the art in the field is currently a two-step process: a high-quality graphene layer synthesis on metal substrate through chemical vapor deposition (CVD) followed by delicate layer transfer onto device-relevant substrates. Here, we report a novel synthesis approach combining ion implantation for a precise graphene layer control and dual-metal smart Janus substrate for a diffusion-limiting graphene formation to directly synthesize large area, high quality, and layer-tunable graphene films on arbitrary substrates without the post-synthesis layer transfer process. Carbon (C) ion implantation was performed on Cu–Ni film deposited on a variety of device-relevant substrates. A well-controlled number of layers of graphene, primarily monolayer and bilayer, is precisely controlled by the equivalent fluence of the implanted C-atoms (1 monolayer ~4 × 10 15 C-atoms/cm 2 ). Upon thermal annealing to promote Cu-Ni alloying, the pre-implanted C-atoms in the Ni layer are pushed toward the Ni/substrate interface by the top Cu layer due to the poor C-solubility in Cu. As a result, the expelled C-atoms precipitate into a graphene structure at the interface facilitated by the Cu-like alloy catalysis. After removing the alloyed Cu-like surface layer, the layer-tunable graphene on the desired substrate is directly realized. The layer-selectivity, high quality, and uniformity of the graphene films are not only confirmed with detailed characterizations using a suite of surface analysis techniques but more importantly are successfully demonstrated by the excellent properties and performance of several devices directly fabricated from these graphene films. Molecular dynamics (MD) simulations using the reactive force field (ReaxFF) were performed to elucidate the graphene formation mechanisms in this novel synthesis approach. With the wide use of ion implantation technology in the microelectronics industry, this novel graphene synthesis approach with precise layer-tunability and transfer-free processing has the promise to advance efficient graphene-device manufacturing and expedite their versatile applications in many fields.

36 MATERIALS SCIENCE↗

DOE OSTI2023

A comprehensive material study of CdSeTe films deposited with differing selenium compositions

The addition of selenium into CdTe to create the ternary alloy CdSeTe has been one of the most impactful advancements to CdTe-based photovoltaics in the last decade. CdSeTe/CdTe bilayer device structures have enabled a gain in short-circuit current due to the narrower bandgap of the alloy, with minimal to no loss in voltage. Intensity of photoluminescence and time-resolved photoluminescence measurements suggest this is due to an increase in carrier lifetime and concomitant greater fraction of radiative vs non-radiative recombination events which allows for a reduction in the voltage deficit. Here, in this work, we study the properties of as-deposited and CdCl 2 -treated CdSeTe films deposited by close-space sublimation under varying conditions from CdSeTe source charges with both 20 and 40 mol% CdSe. We find that the selenium content in the deposited films are substantially reduced from that of the source material. Additionally, deposition temperature, particularly that of the substrate, considerably affects the grain size, crystallinity, and photoluminescence of the material, illustrating the importance of source material selection and process optimization. Finally, we present evidence that the source material, and therefore the properties of the deposited films, change over time as the source material is used.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Functionalization of Monolayer MoS 2 with Layered Multimolecular Architectures

Two dimensional van der Waals materials have attracted attention due to their unique properties that arise in the monolayer versus bulk limits. Monolayer MoS 2 has been at the forefront of 2D materials due to its broad applicability in catalysis, photovoltaics, and spintronics. To realize the capabilities of MoS 2 enabled technology, it is necessary to engineer interfaces where charge carriers can be funneled toward or away from the surface. Molecular systems are a versatile strategy to enable this. Ion-linked molecular architectures have been used previously to circumvent difficult and taxing synthetic methods. Here, we demonstrate the growth of metal ion-linked bilayers (ILBs) on monolayer MoS 2 consisting of a first layer spacer (4-mercaptobenzoic acid, MBA) with a Zn(II) ion linked to a fluorophore (BODIPY). Using a combination of Atomic Force Microscopy and Raman spectroscopy, we resolved intrinsic S-vacancies in the MoS 2 lattice via S–H bond breaking of MBA. X-ray Photoelectron Spectroscopy confirmed that Zn(II) acetate can coordinate to carboxylate groups on MBA. Furthermore, with photoluminescence microscopy, we determined that BODIPY emission is observable only in the presence of a metal ion, confirming the growth of a multimolecular ion-linked supramolecular assembly on MoS 2 .

36 MATERIALS SCIENCE↗

DOE OSTI2020

Electrodynamics of Thin Sheets of Twisted Material

We construct a minimal theory describing the optical activity of a thin sheet of a twisted material, the simplest example of which is twisted bilayer graphene. We introduce the notion of "twisted electrical conductivity", which parametrizes the parity-odd response of a thin film to a perpendicularly falling electromagnetic waves with wavelength larger than the thickness of the sheet. Here, we show that the low-frequency Faraday rotation angle has different behaviors in different phases. For an insulator, the Faraday angle behaves as ω 2 at low frequencies, with the coefficient being determined by the linear relationship between a component of the electric quadrupole moment and the external electric field. For superconductors, the Faraday rotation angle is constant when the frequency of the incoming EM waves is below the superconducting gap and is determined by the coefficient of the Lifshitz invariant in the Ginzburg-Landau functional describing the superconducting state. In the metallic state, we show that the twisted conductivity is proportional to the "magnetic helicity" (scalar product of the velocity and the magnetic moment) of the quasiparticle, averaged around the Fermi surface. The theory is general and is applicable to strongly correlated phases.

Son, Dam Thanh↗

NASA NTRS2004

In situ Pulsed Laser Deposition of C-Axis Oriented MgB2 Films and Their Characterization

The recent discovery of an intermetallic superconductor MgB2 has renewed interest in the area of superconductivity not only because of fundamental understanding of superconductivity but also due to its potential applicability in devices such as thermal detectors. Considerable amount of research has been devoted to obtain MgB2 films by an all in situ growth technique. We have grown MgB2 thin films by an all in situ pulsed laser deposition process from pure B and Mg targets. Ultrathin layers of B and Mg were deposited in a multilayer configuration. Hundreds of such Mg-B bilayers with a capping Mg layer on the top were deposited on sapphire substrate. These depositions were done in high vacuum (approx. 10(exp -7) Torr) and at room temperature. After deposition, such a configuration was annealed at high temperature for a short time in a forming gas (4% H2 in Ar). The best films, obtained by this procedure, showed superconducting transition temperature approx. 30 K. These films have been characterized by x-ray diffraction, Rutherford Backscattering Spectrometry, AC susceptibility-, resistivity- (with and without magnetic field) and 1/f noise-measurements. The physical properties of these films will be presented and discussed.

Shinde, Sanjay↗

DOE OSTI2025

Robust Biaxial Anisotropy and Switchable Néel Vectors in LaFeO 3 Epitaxial Films

Antiferromagnets with highly stable but switchable Néel vectors are desired for antiferromagnetic spintronics with ultrafast speed and terahertz frequencies. Electrical switching of antiferromagnetic insulators has been demonstrated using binary antiferromagnets, while large families of complex antiferromagnets such as perovskites are largely unexplored. Here, we show that epitaxial LaFeO 3 thin films on SrTiO 3 (001) exhibit clear, robust biaxial anisotropy with a spin-flop field of a few tesla. Angular-dependent spin-Hall magnetoresistance (SMR) characterizations of Pt/LaFeO 3 bilayers with the current channel along SrTiO 3 [100] and [110] reveal distinct, intriguing shapes and field dependence. Simulations using a macrospin model accurately describe the main behavior and fine features of the SMR data from which key antiferromagnetic parameters are extracted. Furthermore, remanent SMR measurement confirms the high fidelity of the Néel vector along either easy axis of the biaxial anisotropy, indicating that epitaxial films of LaFeO 3 and potentially other perovskite antiferromagnets offer an attractive platform for antiferromagnetic spintronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Charge-spin interconversion in epitaxial Pt probed by spin-orbit torques in a magnetic insulator

We measure spin-orbit torques (SOTs) in a model system of all-epitaxial ferrite/Pt bilayers to gain insights into charge-spin interconversion in Pt. With negligible electronic conduction in the insulating ferrite, the crystalline Pt film acts as the sole source of charge-to-spin conversion. A small fieldlike SOT independent of Pt thickness suggests a weak Rashba-Edelstein effect at the ferrite/Pt interface. By contrast, we observe a sizable dampinglike SOT that depends on the Pt thickness, from which we deduce the dominance of an extrinsic spin-Hall effect (skew scattering) and Dyakonov-Perel spin relaxation in the crystalline Pt film. Furthermore, our results point to a large internal spin-Hall ratio of ≈ 0.8 in epitaxial Pt. Furthermore, our experimental work takes an essential step towards understanding the mechanisms of charge-spin interconversion and SOTs in Pt-based heterostructures, which are crucial for power-efficient spintronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Room-temperature intrinsic ferromagnetism in epitaxial CrTe 2 ultrathin films

While the discovery of two-dimensional (2D) magnets opens the door for fundamental physics and next-generation spintronics, it is technically challenging to achieve the room-temperature ferromagnetic (FM) order in a way compatible with potential device applications. Here in this paper, we report the growth and properties of single- and few-layer CrTe 2 , a van der Waals (vdW) material, on bilayer graphene by molecular beam epitaxy (MBE). Intrinsic ferromagnetism with a Curie temperature (TC) up to 300 K, an atomic magnetic moment of ~0.21 μ B /Cr and perpendicular magnetic anisotropy (PMA) constant (K u ) of 4.89 × 10 5 erg/cm 3 at room temperature in these few-monolayer films have been unambiguously evidenced by superconducting quantum interference device and X-ray magnetic circular dichroism. This intrinsic ferromagnetism has also been identified by the splitting of majority and minority band dispersions with ~0.2 eV at Г point using angle-resolved photoemission spectroscopy. The FM order is preserved with the film thickness down to a monolayer (T C ~ 200 K), benefiting from the strong PMA and weak interlayer coupling. The successful MBE growth of 2D FM CrTe 2 films with room-temperature ferromagnetism opens a new avenue for developing large-scale 2D magnet-based spintronics devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

Dynamic processes in transient phases during self-assembly of organic semiconductor thin films

Understanding and manipulating crystallization processes has been an important challenge for solution-processed organic thin films, both for fundamental studies and for fabricating thin films with near-intrinsic charge transport properties. We report an in situ X-ray scattering study of the crystallization of 2-decyl-7-phenyl-[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-C 10 ) during its deposition from solution. At temperatures modestly below the smectic-E/crystalline phase boundary, the crystallization goes through a transient liquid crystal state before reaching the final stable crystalline phase. Significant dynamics occur in the first few seconds of the transition, which are observed through fluctuations in the X-ray scattering intensity, and are correlated with the time interval that the transient thin film coexists with the evaporating solvent. The transition to the stable crystalline phase takes minutes or even hours under these conditions, which may be a result of the asymmetry of the molecule. Transient phases are of potential interest for applications, since they can act as a route to self-assembly of organic thin films. However, our observations show that the long-lived monolayer-stacked intermediate state does not act as a template for the bilayer-stacked crystalline phase. Rather, the grain structure is replaced through nucleation, where the nucleation free-energy barrier is related to a potential barrier that prevents molecules to flip their long axis by 180°.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Dimensional crossover in spin Hall oscillators

Auto-oscillations of magnetization driven by direct spin current have been previously observed in multiple quasi-zero-dimensional (0D) ferromagnetic systems such as nanomagnets and nanocontacts. Recently, it was shown that pure spin Hall current can excite coherent auto-oscillatory dynamics in quasi-one-dimensional (1D) ferromagnetic nanowires but not in quasi-two-dimensional (2D) ferromagnetic films. Here we study the 1D to 2D dimensional crossover of current-driven magnetization dynamics in wire-based Pt/Ni 80 Fe 20 bilayer spin Hall oscillators via varying the wire width. We find that increasing the wire width results in an increase of the number of excited auto-oscillatory modes accompanied by a decrease of the amplitude and coherence of each mode. We also observe a crossover from a hard to a soft onset of the auto-oscillations with increasing wire width. The amplitude of auto-oscillations rapidly decreases with increasing temperature suggesting that interactions of the phase-coherent auto-oscillatory modes with incoherent thermal magnons play an important role in suppression of the auto-oscillatory dynamics. Our measurements in this work set the upper limit on the dimensions of an individual spin Hall oscillator and elucidate the mechanisms leading to suppression of coherent auto-oscillations with increasing oscillator size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

In-plane Néel wall chirality and orientation of interfacial Dzyaloshinskii-Moriya vector in magnetic films

The interfacial Dzyaloshinskii-Moriya interaction (DMI) is of great interest as it can stabilize chiral spin structures in thin films. Experiments verifying the orientation of the interfacial DMI vector remain rare, in part due to the difficulty of separating vector components of DMI. In this study, Fe/Ni bilayers and Co/Ni multilayers were deposited epitaxially onto Cu(001) and Pt(111) substrates, respectively. By tailoring the effective anisotropy, spin reorientation transitions (SRTs) are employed to probe the orientation of the DMI vector by measuring the spin structure of domain walls on both sides of the SRTs. In our results, the interfacial DMI is found to be sufficiently strong to stabilize chiral Néel walls in the out-of-plane magnetized regimes, while achiral Néel walls are observed in the in-plane magnetized regimes. Furthermore, these findings experimentally confirm that the out-of-plane component of the DMI vector is insignificant in these fcc(001) and fcc(111) oriented interfaces, even in the presence of atomic steps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS2000

Multilayer Film Assembly of Carbon Nanotubes

An approach to assemble multilayers of carbon nanotubes on a substrate is presented. Chemical vapor deposition using a transition metal catalyst formulation is used to grow the nanotubes. Results show a bilayer assembly of nanotubes each with a different density of tubes.

Cassell, Alan M.↗

NASA NTRS2002

Theoretical Studies of Liquid He-4 Near the Superfluid Transition

We performed theoretical studies of liquid helium by applying state of the art simulation and finite-size scaling techniques. We calculated universal scaling functions for the specific heat and superfluid density for various confining geometries relevant for experiments such as the confined helium experiment and other ground based studies. We also studied microscopically how the substrate imposes a boundary condition on the superfluid order parameter as the superfluid film grows layer by layer. Using path-integral Monte Carlo, a quantum Monte Carlo simulation method, we investigated the rich phase diagram of helium monolayer, bilayer and multilayer on a substrate such as graphite. We find excellent agreement with the experimental results using no free parameters. Finally, we carried out preliminary calculations of transport coefficients such as the thermal conductivity for bulk or confined helium systems and of their scaling properties. All our studies provide theoretical support for various experimental studies in microgravity.

Manousakis, Efstratios↗

DOE OSTI2025

Spin–orbit torque in a three-fold-symmetric bilayer and its effect on magnetization dynamics

Field-free switching of perpendicular magnetization has previously been observed in an epitaxial L1 1 -ordered CoPt/CuPt bilayer and attributed to spin–orbit torque (SOT) arising from the crystallographic 3m point group of the interface. Using a first-principles nonequilibrium Green's function formalism combined with the Anderson disorder model, we calculate the angular dependence of the SOT in a CoPt/CuPt bilayer and find that the magnitude of the 3m SOT is about 20% of the conventional dampinglike SOT. We further study the magnetization dynamics in perpendicularly magnetized films in the presence of 3m SOT and Dzyaloshinskii–Moriya interaction, using the equations of motion for domain wall dynamics and micromagnetic simulations. For systems where strong interfacial DMI results in the Néel character of domain walls, we find that a very large current density is required to achieve deterministic switching, because reorientation of the magnetization inside the domain wall is necessary to induce the switching asymmetry. For thicker films with relatively weak interfacial DMI and the Bloch character of domain walls, deterministic switching is possible at much smaller current densities, which may explain the recent experimental findings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

A tandem radiative/evaporative cooler for weather-insensitive and high-performance daytime passive cooling

Radiative cooling and evaporative cooling with low carbon footprint are regarded as promising passive cooling strategies. However, the intrinsic limits of continuous water supply with complex systems for evaporative cooling, and restricted cooling power as well as the strict requirement of weather conditions for radiative cooling, hinder the scale of their practical applications. Here, we propose a tandem passive cooler composed of bilayer polymer that enables dual-functional passive cooling of radiation and evaporation. Specifically, the high reflectivity to sunlight and mid-infrared emissivity of this polymer film allows excellent radiative cooling performance, and its good atmospheric water harvesting property of underlayer ensures self-supply of water and high evaporative cooling power. Consequently, this tandem passive cooler overcomes the fundamental difficulties of radiative cooling and evaporative cooling and shows the applicability under various conditions of weather/climate. It is expected that this design can expand the practical application domain of passive cooling.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Nanostructured polyelectrolytes for ion-selective membranes

Nanostructured polyelectrolyte bilayers deposited by Layer-by-Layer deposition on nanoporous membranes can be selectively crosslinked to modify the polyelectrolyte charge density and control ionic selectivity independent of ionic conductivity. For example, the polyelectrolyte bilayer can comprise a cationic polymer layer, such as poly(ethyleneimine), and an anionic polymer layer, such as poly(acrylic acid). Increasing the number of bilayers increases the cation selectivity when the poly(ethyleneimine) layer is crosslinked with glutaraldehyde. Crosslinking the membranes also increases the chemical and mechanical strength of the polyelectrolyte films. This controllable and inexpensive method can be used to create ion-selective and mechanically robust membranes on porous supports for a wide range of applications.

25 ENERGY STORAGE↗