Results for “autonomous” — Page 9

NASA NTRS2014

Autonomous Spacecraft Communication Interface for Load Planning

Ground-based controllers can remain in continuous communication with spacecraft in low Earth orbit (LEO) with near-instantaneous communication speeds. This permits near real-time control of all of the core spacecraft systems by ground personnel. However, as NASA missions move beyond LEO, light-time communication delay issues, such as time lag and low bandwidth, will prohibit this type of operation. As missions become more distant, autonomous control of manned spacecraft will be required. The focus of this paper is the power subsystem. For present missions, controllers on the ground develop a complete schedule of power usage for all spacecraft components. This paper presents work currently underway at NASA to develop an architecture for an autonomous spacecraft, and focuses on the development of communication between the Mission Manager and the Autonomous Power Controller. These two systems must work together in order to plan future load use and respond to unanticipated plan deviations. Using a nominal spacecraft architecture and prototype versions of these two key components, a number of simulations are run under a variety of operational conditions, enabling development of content and format of the messages necessary to achieve the desired goals. The goals include negotiation of a load schedule that meets the global requirements (contained in the Mission Manager) and local power system requirements (contained in the Autonomous Power Controller), and communication of off-plan disturbances that arise while executing a negotiated plan. The message content is developed in two steps: first, a set of rapid-prototyping "paper" simulations are preformed; then the resultant optimized messages are codified for computer communication for use in automated testing.

Controls↗

NASA NTRS2010

Estimation and Control for Autonomous Coring from a Rover Manipulator

A system consisting of a set of estimators and autonomous behaviors has been developed which allows robust coring from a low-mass rover platform, while accommodating for moderate rover slip. A redundant set of sensors, including a force-torque sensor, visual odometry, and accelerometers are used to monitor discrete critical and operational modes, as well as to estimate continuous drill parameters during the coring process. A set of critical failure modes pertinent to shallow coring from a mobile platform is defined, and autonomous behaviors associated with each critical mode are used to maintain nominal coring conditions. Autonomous shallow coring is demonstrated from a low-mass rover using a rotary-percussive coring tool mounted on a 5 degree-of-freedom (DOF) arm. A new architecture of using an arm-stabilized, rotary percussive tool with the robotic arm used to provide the drill z-axis linear feed is validated. Particular attention to hole start using this architecture is addressed. An end-to-end coring sequence is demonstrated, where the rover autonomously detects and then recovers from a series of slip events that exceeded 9 cm total displacement.

Hudson, Nicolas↗

NASA NTRS2015

Operator Informational Needs for Multiple Autonomous Small Vehicles

With the anticipated explosion of small unmanned aerial vehicles, it is highly likely that operators will be controlling fleets of autonomous vehicles. To fulfill the promise of autonomy, vehicle operators will not be concerned with manual control of the vehicle; instead, they will deal with the overall mission. Furthermore, the one operator to many vehicles is becoming a constant meme with various industries including package delivery, search and rescue, and utility companies. In order for an operator to concurrently control several vehicles, his station must look and behave very differently than the current ground control station instantiations. Furthermore, the vehicle will have to be much more autonomous, especially during non-normal operations, in order to accommodate the knowledge deficit or the information overload of the operator in charge of several vehicles. The expected usage increase of small drones requires presenting the operational information generated by a fleet of heterogeneous autonomous agents to an operator. NASA Langley Research Center's Autonomy Incubator has brought together researchers in various disciplines including controls, trajectory planning, systems engineering, and human factors to develop an integrated system to study autonomy issues. The initial human factors effort is focusing on mission displays that would give an operator the overall status of all autonomous agents involved in the current mission. This paper will discuss the specifics of the mission displays for operators controlling several vehicles.

Trujillo, Anna C.↗

NASA NTRS2016

Using Multimodal Input for Autonomous Decision Making for Unmanned Systems

Autonomous decision making in the presence of uncertainly is a deeply studied problem space particularly in the area of autonomous systems operations for land, air, sea, and space vehicles. Various techniques ranging from single algorithm solutions to complex ensemble classifier systems have been utilized in a research context in solving mission critical flight decisions. Realized systems on actual autonomous hardware, however, is a difficult systems integration problem, constituting a majority of applied robotics development timelines. The ability to reliably and repeatedly classify objects during a vehicles mission execution is vital for the vehicle to mitigate both static and dynamic environmental concerns such that the mission may be completed successfully and have the vehicle operate and return safely. In this paper, the Autonomy Incubator proposes and discusses an ensemble learning and recognition system planned for our autonomous framework, AEON, in selected domains, which fuse decision criteria, using prior experience on both the individual classifier layer and the ensemble layer to mitigate environmental uncertainty during operation.

Neilan, James H.↗

NASA NTRS2016

Integrated System for Health Management and Autonomous Control (ISHM-AC): Development and Application

Autonomous control systems represent a technological barrier from manual and automated operated control systems in an industry wide application. An increase in energy-efficient storage, transfer and use of cryogens and cryogenic propellants on Earth and in space has been observed in space related industries between NASA, government and commercial programs. An increase in efficiency of cryogenic systems demands an increase in the capabilities of the control and monitoring system that manages them. As new technologies are developed for cryogenic systems, complexity and capability increases. The increase in complexities are a natural drive to develop better and more capable health monitoring and control system management. Current research and development efforts lead the Cryogenics Test Laboratory at the Kennedy Space Center to improve its automated control and health monitoring system from a Programmable Logic Control (PLC) based-only system to a fully Integrated System for Health Management (ISHM) - Autonomous Control (AC) capable of performing autonomous operations on a cryogenic propellant transfer system. This ISHM-AC system has been developed and tested by controlling a complete simulated propellant transfer operation. The capabilities and test results of this fully integrated autonomous system for cryogenics propellant transfer operation will be presented in this paper.

Toro, Jaime A.↗

NASA NTRS2016

Integrated System for Health Management and Autonomous Control (ISHM-AC) for Cryogenic Operations on the Simulated Propellant Loading System

Autonomous control systems represent a technological barrier from manual and automated operated control systems in an industry wide application. An increase in energy-efficient storage, transfer and use of cryogens and cryogenic propellants on Earth and in space has been observed in space related industries between NASA, government and commercial programs. An increase in efficiency of cryogenic systems demands an increase in the capabilities of the control and monitoring system that manages them. As new technologies are developed for cryogenic systems, complexity and capability increases. The increase in complexities are a natural drive to develop better and more capable health monitoring and control system management. Current research and development efforts lead the Cryogenics Test Laboratory at the Kennedy Space Center to improve its automated control and health monitoring system from a Programmable Logic Control (PLC) based-only system to a fully Integrated System for Health Management (ISHM) - Autonomous Control (AC) capable of performing autonomous operations on a cryogenic propellant transfer system. This ISHM-AC system has been developed and tested by controlling a complete simulated propellant transfer operation. The capabilities and test results of this fully integrated autonomous system for cryogenics propellant transfer operation will be presented in this paper.

Toro Medina, Jaime A.↗

NASA NTRS2017

Progress of Crew Autonomous Scheduling Test (CAST) On the ISS

The United States space policy is evolving toward missions beyond low Earth orbit. In an effort to meet that policy, NASA has recognized Autonomous Mission Operations (AMO) as a valuable capability. Identified within AMO capabilities is the potential for autonomous planning and replanning during human spaceflight operations. That is allowing crew members to collectively or individually participate in the development of their own schedules. Currently, dedicated mission operations planners collaborate with international partners to create daily plans for astronauts aboard the International Space Station (ISS), taking into account mission requirements, ground rules, and various vehicle and payload constraints. In future deep space operations the crew will require more independence from ground support due to communication transmission delays. Furthermore, crew members who are provided with the capability to schedule their own activities are able to leverage direct experience operating in the space environment, and possibly maximize their efficiency. CAST (Crew Autonomous Scheduling Test) is an ISS investigation designed to analyze three important hypotheses about crew autonomous scheduling. First, given appropriate inputs, the crew is able to create and execute a plan in a reasonable period of time without impacts to mission success. Second, the proximity of the planner, in this case the crew, to the planned operations increases their operational efficiency. Third, crew members are more satisfied when given a role in plan development. This presentation shows the progress done in this study with a single astronaut test subject participating in five CAST sessions. CAST is a technology demonstration payload sponsored by the ISS Research Science and Technology Office, and performed by experts in Mission Operations Planning from the Flight Operations Directorate at NASA Johnson Space Center, and researchers across multiple NASA centers.

Healy, Matthew↗

NASA NTRS2018

Serious Gaming for Building a Basis of Certification via Trust and Trustworthiness of Autonomous Systems

Autonomous systems governed by a variety of adaptive and nondeterministic algorithms are being planned for inclusion into safety-critical environments, such as unmanned aircraft and space systems in both civilian and military applications. However, until autonomous systems are proven and perceived to be capable and resilient in the face of unanticipated conditions, humans will be reluctant or unable to delegate authority, remaining in control aided by machine-based information and decision support. Proving capability, or trustworthiness, is a necessary component of certification. Perceived capability is a component of trust. Trustworthiness is an attribute of a cyber-physical system that requires context-driven metrics to prove and certify. Trust is an attribute of the agents participating in the system and is gained over time and multiple interactions through trustworthy behavior and transparency. Historically, artificial intelligence and machine learning systems provide answers without explanation - without a rationale or insight into the machine “thinking”. In order to function as trusted teammates, machines must be able to explain their decisions and actions. This transparency is a product of both content and communication. NASA’s Autonomy Teaming & TRAjectories for Complex Trusted Operational Reliability (ATTRACTOR) project seeks to build a basis for certification of autonomous systems via establishing metrics for trustworthiness and trust in multi-agent team interactions, using AI (Artificial Intelligence) explainability and persistent modeling and simulation, in the context of mission planning and execution, with analyzable trajectories. Inspired by Massively Multiplayer Online Role Playing Games (MMORPG) and Serious Gaming, the proposed ATTRACTOR modeling and simulation environment is similar to online gaming environments in which player (aka agent) participants interact with each other, affect their environment, and expect the simulation to persist and change regardless of any individual agent’s active participation. This persistent simulation environment will accommodate individual agents, groups of self-organizing agents, and large-scale infrastructure behavior. The effects of the emerging adaptation and coevolution can be observed and measured to building a basis of measurable trustworthiness and trust, toward certification of safety-critical autonomous systems.

Allen, B. Danette↗

NASA NTRS2019

A Control Framework for Autonomous Smart Grids for Space Power Applications

With the National Aeronautics and Space Administration's (NASA) rising interest in lunar surface operations and deep space exploration, there is a growing need to move from traditional ground-based mission operations to more autonomous vehicle level operations. In lunar surface operations, there are periods of time where communications with ground-based mission control could not occur, forcing vehicles and a lunar base to completely operate independent of the ground. For deep space exploration missions, communication latency times increase to greater than 15 minutes making real-time control of critical systems difficult, if not near impossible. These challenges are driving the need for an autonomous power control system that has the capability to manage power and energy. This will ensure that critical loads have the necessary power to support life systems and carry out critical mission objectives. This paper presents a flexible, hierarchical, distributed control methodology that enables autonomous operation of smart grids and can integrate into a higher level autonomous architecture.

Csank, Jeffrey T.↗

NASA NTRS2019

A Control Framework for Autonomous Smart Grids for Space Power Applications

With the National Aeronautics and Space Administration's (NASA) rising interest in lunar surface operations and deep space exploration, there is a growing need to move from traditional ground-based mission operations to more autonomous vehicle level operations. In lunar surface operations, there are periods of time where communications with ground-based mission control could not occur, forcing vehicles and a lunar base to completely operate independent of the ground. For deep space exploration missions, communication latency times increase to greater than 15 minutes making real-time control of critical systems difficult, if not near impossible. These challenges are driving the need for an autonomous power control system that has the capability to manage power and energy. This will ensure that critical loads have the necessary power to support life systems and carry out critical mission objectives. This paper presents a flexible, hierarchical, distributed control methodology that enables autonomous operation of smart grids and can integrate into a higher level autonomous architecture.

Carbone, Marc A.↗

NASA NTRS2018

A Persistent Simulation Environment for Autonomous Systems

The age of Autonomous Unmanned Aircraft Systems (AUAS) is creating new challenges for the accreditation and certification requiring new standards, policies and procedures that sanction whether a UAS is safe to fly. Establishing a basis for certification of autonomous systems via research into trust and trustworthiness is the focus of Autonomy Teaming and TRAjectories for Complex Trusted Operational Reliability (ATTRACTOR), a new NASA Convergent Aeronautics Solution (CAS) project. Simulation Environments to test and evaluate AUAS decision making may be a low-cost solution to help certify that various AUAS systems are trustworthy enough to be allowed to fly in current general and commercial aviation airspace. NASA is working to build a peer-to-peer persistent simulation (P3 Sim) environment. The P3 Sim will be a Massively Multiplayer Online (MMO) environment were AUAS avatars can interact with a complex dynamic environment and each other. The focus of the effort is to provide AUAS researchers a low-cost intuitive testing environment that will aid training for and assessment of decisions made by autonomous systems such as AUAS. This presentation focuses on the design approach and challenges faced in development of the P3 Sim Environment is support of investigating trustworthiness of autonomous systems.

Kelley, Benjamin N.↗

NASA NTRSDate not supplied

Supervised Autonomous Assembly to Create and Evolve Persistent Assets

Supervised autonomous assembly (SAA) will create a paradigm shift in the planning and design of future persistent assets (PAs), both in near zero-g environments and on planetary surfaces. SAA refers to an autonomy approach that has the benefits of autonomous assembly as well as the benefits provided by a supervisor (operator) who is available to resolve unexpected situations. SAA provides both increased design freedom as well as reduced programmatic risk. SAA enables evolution of future PAs over decades as in-space operations transition from single purpose missions to creation of PAs, such as laboratories and experimental stations which more closely resembling terrestrial laboratories that can easily adapt and evolve to new missions leveraging repeated visits to the PA. The ability to evolve enables PAs to rapidly respond to changing objectives resulting from new questions as our understanding improves. A recently initiated National Aeronautics and Space Administration (NASA) project in the Space Technology Mission Directorate (STMD) Game Changing Development (GCD) Program called the Precision Assembled Space Structure (PASS), leverages the advantages of SAA to develop technologies that enable efficient creation and evolution of hexagonal topologies; both planar (example: fuel depots) and curved (examples: telescopes and shelters). PASS will be used to provide context for the philosophy and concepts discussed as well as the decision and selections made. PASS objectives are: a) Develop confidence in SAA and on-orbit servicing, assembly and manufacturing (OSAM) technologies by executing a test campaign that uses a path-to-flight autonomous precision assembly process directly applicable to future space telescopes. b) Test autonomous technologies including automated path planning and error recovery, to emphasize a robust approach that relies on generic robots and special purpose tools. c) Validate critical component models using a digital twin that includes the assembled primary mirror support structure and assembly process. A digital twin is a high-fidelity simulation of the asset capable of predicting the on-orbit performance. The paper concludes after identifying the critical need for a modest assembly flight experiment to validate and develop confidence in the SAA paradigm, thus accelerating adoption of the benefits described. SAA is a game changing paradigm that enhances the ability of an organization to infuse new technology through rapid evolution of PAs while leveraging OSAM technologies.

Structural Modeling↗

NASA NTRSDate not supplied

Designing a Distributed Web-based Simulation Environment for Enabling Autonomous Systems Research

In the continued pursuit of creating a future with robust Urban Air Mobility (UAM) operations defined as safe and efficient air traffic operations in metropolitan environments for both piloted and autonomous systems, development of the concepts, technologies, and procedures to establish this UAM ecosystem remains an active area of research. In particular, as autonomous systems continue to grow in both complexity and use throughout UAM concepts the need for simulation environments to both test individual components and systems and to study the complex interactions between them is paramount. In this paper we address design considerations, technologies, and challenges of adapting native simulation environment application concepts to an interactive and distributed web-based framework. The proposed web-based design allows for easier and wider access for developing, testing, integrating, and studying emergent behaviors of complex autonomous systems interaction. We demonstrate the utility of the proposed approach by showing multi-agent interaction and emergent behavior in two scenarios: (1) autonomous urban air mobility vehicles flying in a convoy and (2) interaction of a convoy with a search and rescue operation.

Benjamin N Kelley↗

NASA NTRS2020

Results From the First Four Years of Aegis Autonomous Target-ing for Chemcam on Mars Science Laboratory and New Capability Planned for Supercam on Mars 2020 Rover

Autonomous Exploration for Gathering Increased Science (AEGIS) was uploaded on the NASA Mars Science Laboratory (MSL) Curiosity rover in 2015 for autonomous target selection. This paper presents results from the first four years of its regular opera-tion on Mars for autonomously selecting targets for the ChemCam remote geochemical spectrometer with a focus on the most recent findings. Results show that AEGIS has targeted the most desired material greater than 93% of the time vs 24% without onboard intelligent targeting. There has also been a notable increase in the rate of ChemCam observations. AE-GIS is also part of surface flight software for the NASA Mars 2020 Perseverance rover. This paper describes new AEGIS capabilities that will be availa-ble for autonomously targeting the SuperCam in-strument after the planned 18 February 2021 landing in Jezero crater on Mars.

Castano, R↗

NASA NTRSDate not supplied

Modeling Deformable Linear Objects for Autonomous Robotic Outfitting of Lunar Surface Systems

The construction of in-space facilities is a significant capability for the establishment of a long-term human presence in space. Autonomous robotic technologies are a critical tool to enabling the construction and maintenance of such permanent facilities. This paper evaluates the outfitting portion of the construction process, focusing on modeling required for robotic manipulation of cable-like objects, referred to as Deformable Linear Objects (DLOs). DLOs contain a high degree of variability, which makes accurate real-time autonomous operations a difficult task. Different modeling methods for DLOs such as discrete mass-spring systems and Cosserat elastic rod models range in problem complexity and accuracy, a trade-off that must be understood to fully realize autonomous cable routing technologies. This paper validates different DLO models through simulation and a hardware experiment, highlighting the size of the state space and accuracy of different approaches. The development of DLO manipulation models for outfitting enables an autonomous architecture for the construction of lunar surface systems.

Amy M Quartaro↗

NASA NTRS2021

An Autonomous Vault-Building Robot System for Creating Spanning Structures

Research in autonomous robots for construction has largely focused on ground-based robots whose reach constrains the size of what they can build, or on climbing or aerial robots that build solid or unroofed structures. Autonomous construction of larger, multistory buildings, or bridges spanning unsupported distances, would require robots that build sturdy structures supporting their own weight. In this paper, we present VaultBot, a system of autonomous robots that build a load-bearing spanning vault using identical modular blocks. The custom blocks employ mechanical and other features to facilitate robotic manipulation and locomotion, and can be removed from and replaced in an assembled structure as a way of repairing damage. We characterize the system's performance and failure modes, and demonstrate reliable autonomous assembly for a structure composed of 46 blocks. Blocks can be made collapsible and deployable as a way of reducing mass and volume that must be transported to a construction site. Such a system could be used to help enable construction of protective shelters in challenging environments, such as disaster relief scenarios, arctic settings, or extraterrestrial habitats.

Nathan Melenbrink↗

NASA NTRSDate not supplied

Modeling Deformable Linear Objects for Autonomous Robotic Outfitting of Lunar Surface Systems

The construction of in-space facilities is a significant capability for the establishment of a long-term human presence in space. Autonomous robotic technologies are a critical tool to enabling the construction and maintenance of such permanent facilities. This paper evaluates the outfitting portion of the construction process, focusing on modeling required for robotic manipulation of cable-like objects, referred to as Deformable Linear Objects (DLOs). DLOs contain a high degree of variability, which makes accurate real-time autonomous operations a difficult task. Different modeling methods for DLOs such as discrete mass-spring systems and Cosserat elastic rod models range in problem complexity and accuracy, a trade-off that must be understood to fully realize autonomous cable routing technologies. This paper validates different DLO models through simulation and a hardware experiment, highlighting the size of the state space and accuracy of different approaches. The development of DLO manipulation models for outfitting enables an autonomous architecture for the construction of lunar surface systems.

Deformable Modeling↗

NASA NTRS2024

Autonomous Medical Officer Support (AMOS) Software Technology Demonstrations on the International Space Station (ISS)

Performance of medical procedures in spaceflight beyond low Earth orbit (LEO) requires novel solutions to replace real-time ground support because as distance from Earth increases, communication latencies increase, hampering remote guidance. The Autonomous Medical Officer Support Software (AMOS) Technology Demonstrations on the International Space Station (ISS) trialed a novel software tool that shifts the emphasis from preflight training and real-time remote guidance (current ISS paradigm) to a new standard of multi-dimensional in-flight just-in-time (JIT) instruction. The AMOS platform is a skill management tool for all mission phases and currently features comprehensive training and guidance modules for urinary bladder and renal ultrasound examinations. Variability in Subject anatomy, Operator experience, and Operator receptiveness to instruction during autonomous exams are persistent but manageable limitations. Here we report the first successful demonstrations of autonomous imaging activities in the operational setting of spaceflight, validating this autonomous guidance proof of concept.

Douglas Ebert↗