Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aqueous electrolytes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Li + (ionophore) nanoclusters engineered aqueous/non-aqueous biphasic electrolyte solutions for high-potential lithium-based batteries

The use of aqueous/non-aqueous biphasic electrolyte solutions in Li-based battery systems circumvents the limitations of poor reductive stability of aqueous electrolyte solutions, broadening their electrochemical stability window. However, aqueous/non-aqueous electrolytes suffer from biphasic mixing and high impedance when Li ions cross the biphasic interface. Here we propose the use of 12-crown-4 (12C4) and tetraglyme (G4) as lithium ionophores to form Li + (ionophore) nanoclusters in both non-aqueous and aqueous phases to overcome the interface challenges in biphasic electrolytes. The Li + (ionophore) nanoclusters have the H 2 O-excluding inner Li + solvation structure in non-polar 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (TTE), allowing fast charge transport across the biphasic interface without solvent mixing or water shuttling. Further, a tailored electrolyte formulation comprising the lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt, 12C4, TTE and H 2 O solvents (labelled LiTFSI-12C4@TTE/H 2 O) demonstrates low impedance (2.7 Ω cm -2 ) at the TTE/H 2 O interface and enabling 2,000 cycles of prelithiated graphite||LiFePO 4 coin cells at 850 mA g -1 with an average Coulombic efficiency of 99.8%. Single-layer 22.5 mAh Li||LiMn 2 O 4 pouch cells using LiTFSI-12C4@TTE/H 2 O electrolyte with G4 delivered a stable discharge capacity of about 1.3 mAh cm -2 for 80 cycles at 0.5 mA cm -2 .

25 ENERGY STORAGE↗
DOE OSTI2023

Methods—Meso-Scale Electrodes for Characterizing Diffusion-Reaction Properties of Redox-Active Organics in Viscous Electrolytes

Deep Eutectic Solvents (DESs) have recently gained interest as flow battery electrolytes. Their advantages include a wider electrochemical stability window compared to aqueous electrolytes, higher solubility for redox-active species, and negligible volatility. However, DESs are often highly viscous, and suffer from low ionic conductivities. This can make assessing redox kinetics difficult when attempting to determine their viability for energy storage. In classical voltammetric measurements, low ionic conductivity manifests as high solution resistance, thereby requiring "live" compensation of the electrolyte ohmic drop when performing fast-scan voltammetry. An uncompensated or inadequately-compensated ohmic drop leads to misinterpretation of the voltammetric behavior, e.g., assessing reversibility vs. irreversibility of a redox reaction. Here, we present micro-fabricated electrodes as facile "meso-scale" electrodes, which overcome these issues by nearly eliminating the ohmic drop while retaining uniformity of the current distribution over the electrode surface. Their use in precise transport-kinetics measurements is demonstrated using a redox-active organic, i.e., 4-Hydroxy-TEMPO in an aqueous medium and in ethaline, which is a viscous DES. This study provides a methodical approach to design and to implement voltammetry experiments using meso-scale electrodes leading to reliable measurements of diffusion-reaction properties of 4-Hydroxy-TEMPO.

25 ENERGY STORAGE↗
DOE OSTI2025

200 h of discharge cycling with an all-aqueous copper thermally regenerative ammonia battery

Thermally regenerative ammonia batteries (TRABs) offer an approach to energy storage and electricity generation by harnessing low-grade heat (T < 150 °C). A TRAB discharge resembles that of a flow battery, where electrochemical reactions produce electrical power from energy stored within aqueous electrolytes. While there are many types of TRABs, the all-aqueous copper TRAB (Cu aq -TRAB) has produced the largest power and energy storage densities. Despite many improvements to TRAB performance, most tests have only lasted a few hours, which are not representative of operation times expected of these devices. Herein, we operated a Cu aq -TRAB for 200 h of constant current discharging to assess battery performance and component stability. After 200 h of testing, the average power density increased slightly to 7.2 mW cm -2 , which was within 0.01 % of starting conditions. Likewise, the average energy density for the final cycle was only 0.03 % lower than the initial cycle. The overall insensitivity of the power cell to cycling represents a major milestone in the advancement of TRAB systems. In conclusion, energy dispersive X-ray spectroscopy provides evidence to suggest that these small changes in power and energy density are likely to the membrane acclimating to TRAB electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2026

Zinc batteries for grid-scale energy storage: Challenges, opportunities, and future directions

The global electricity sector is undergoing rapid transformation, increasing demand for reliable stationary energy storage and intensifying the need for safe, cost-effective, and scalable technologies for grid-scale applications. While lithium-ion batteries currently dominate the market, concerns over cost, safety, and resource availability motivate the exploration of alternative chemistries. Zinc-based batteries have emerged as a promising option due to the abundance, low cost, and wide geographic distribution of zinc, combined with the inherent safety of aqueous electrolytes. This perspective examines the potential of zinc batteries for stationary energy storage, with particular focus on rechargeable zinc-air systems. We discuss the evolution of zinc battery technologies and compare zinc-air, zinc-bromine, nickel-zinc, and aqueous zinc-ion chemistries, highlighting their advantages for grid applications. Key challenges limiting rechargeable zinc battery performance are analyzed, including dendrite formation and corrosion at the zinc anode, electrolyte degradation from carbonation and evaporation, and sluggish oxygen electrocatalysis at the air cathode. Emerging strategies to address these limitations are reviewed, including advanced electrode architectures, electrolyte engineering, catalyst development, and system-level design improvements. Lastly, we outline future research directions and opportunities for developing durable, efficient, and economically viable zinc-based energy storage systems for grid-scale applications.

Aqueous electrolytes↗
DOE OSTI2024

Cation valency in water-in-salt electrolytes alters the short- and long-range structure of the electrical double layer

Highly concentrated aqueous electrolytes (termed water-in-salt electrolytes, WiSEs) at solid-liquid interfaces are ubiquitous in myriad applications including biological signaling, electrosynthesis, and energy storage. This interface, known as the electrical double layer (EDL), has a different structure in WiSEs than in dilute electrolytes. Here, we investigate how divalent salts [zinc bis(trifluoromethylsulfonyl)imide, Zn(TFSI) 2 ], as well as mixtures of mono- and divalent salts [lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) mixed with Zn(TFSI) 2 ], affect the short- and long-range structure of the EDL under confinement using a multimodal combination of scattering, spectroscopy, and surface forces measurements. Raman spectroscopy of bulk electrolytes suggests that the cation is closely associated with the anion regardless of valency. Wide-angle X-ray scattering reveals that all bulk electrolytes form ion clusters; however, the clusters are suppressed with increasing concentration of the divalent ion. To probe the EDL under confinement, we use a Surface Forces Apparatus and demonstrate that the thickness of the adsorbed layer of ions at the interface grows with increasing divalent ion concentration. Multiple interfacial layers form following this adlayer; their thicknesses appear dependent on anion size, rather than cation. Importantly, all electrolytes exhibit very long electrostatic decay lengths that are insensitive to valency. It is likely that in the WiSE regime, electrostatic screening is mediated by the formation of ion clusters rather than individual well-solvated ions. This work contributes to understanding the structure and charge-neutralization mechanism in this class of electrolytes and the interfacial behavior of mixed-electrolyte systems encountered in electrochemistry and biology.

Science & Technology - Other Topics↗
DOE OSTI2020

Enabling safe aqueous lithium ion open batteries by suppressing oxygen reduction reaction

Abstract Due to the non-flammable nature of water-based electrolytes, aqueous lithium-ion batteries are resistant to catching fire. However, they are not immune to the risk of explosion, since the sealing structure adopted by current batteries limits the dissipation of heat and pressure within the cells. Here, we report a safe aqueous lithium-ion battery with an open configuration using water-in-salt electrolytes and aluminum oxide coated anodes. The design can inhibit the self-discharge by substantially suppressing the oxygen reduction reaction on lithiated anodes and enable good cycle performance over 1000 times. Our study may open a pathway towards safer lithium-ion battery designs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Concentrated dual-cation electrolyte strategy for aqueous zinc-ion batteries

Rechargeable Zn-ion batteries are highly promising for stationary energy storage because of their low cost and intrinsic safety. However, due to the poor reversibility of Zn anodes and dissolution of oxide cathodes, aqueous Zn-ion batteries encounter rapid performance degradation when operating in conventional low-concentration electrolytes. Herein, we demonstrate that an aqueous Zn2+ electrolyte using a supporting Na salt at a high concentration is efficient to address these issues without sacrificing the power densities, cycling stability, and safety of zinc-ion batteries. We show that the high-concentration solute minimizes the number of free water molecules and the changes in the electronic state of the electrolyte. A combination of experimental and theoretical investigations reveals that a unique interphase, formed on the Zn anode, enables reversible and uniform Zn plating. Utilizing a cathode of sodium vanadate synthesized through a scalable strategy, the Zn–sodium vanadate battery with the concentrated bi-cation electrolyte shows improved cycling stability, decent rate performance, and low self-discharge. This work provides new insights on electrolyte engineering to achieve high-performance aqueous batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Decoupling Conductivity and Solubility in Electrolytes Using Microemulsions

Redox flow batteries have recently received considerable attention as possible large-scale energy storage devices, but their low energy density has inhibited widespread application. In this work, a novel strategy of decoupling conductivity and solubility of electrolytes using microemulsion is put forward to enhance ionic conduction of non-aqueous electrolytes, increase the selectivity of active species, improve the battery voltage, and eventually achieve the possibility of high energy density. We report a study of the electrochemistry of ferrocene in single phase Tween® 20/1-butanol/H 2 O/toluene microemulsion system at 20 °C. At low and intermediate surfactant to water weight ratios (<0.5/0.5), the voltammogram exhibits reversible electrochemical behavior, while at high surfactant levels the curves show lower levels of reversibility. The latter voltammograms have a form typically associated with high resistance in solution, consistent with a gradual transition in microstructure as surfactant levels increase. This change in structure is supported by correlations with conductivity results based on the literature. The voltammograms show little evidence of anomalies in double layer capacitance or electrode "blocking" by droplets, suggesting that the electron transfer is indeed occurring in a facile manner between the electrode and the ferrocene inside the oil phase.

25 ENERGY STORAGE↗
DOE OSTI2022

How do super concentrated electrolytes push the Li-ion batteries and supercapacitors beyond their thermodynamic and electrochemical limits?

Increasing the energy density of energy storage devices is currently the key target of many battery and supercapacitor research activities. For both types of devices, the electrochemical stability window (ESW) determines the effective energy density of the device. ESWs are defined by the effective oxidation and reduction potentials of the electrolyte, which are controlled by many various factors, including the HOMO/LUMO (highest/lowest unoccupied molecular orbital) energies of the electrolyte molecules, the nature of the electrode/electrolyte interphases, and other physicochemical properties. The concentration of the electrolyte would affect the HOMO/ LUMO levels thus also change the ESW. A higher concentration of salt induces specific arrangements among the anion, cation, and solvent molecules of an electrolyte, altering the bulk behavior of the electrolyte, resulting in drastic change in the electrode interfaces. These uniquely modified physicochemical properties extend the ESW in several different ways, including the enhancement in the kinetic stability of the electrodes, as well as the thermodynamic and Nernst shifts of the oxidation/reduction potentials of the electrolyte. For organic electrolytes, it is the reduced amount of free solvent molecules that plays the key role in such changes; whereas for aqueous electrolytes, it is the scarcity of free water molecules and the reduced water activity that control the key properties of the electrolyte. Here, we focus on elucidating the fundamental structural changes occurring within an electrolyte system with increasing salt concentrations. The underlying mechanisms which not only facilitates the extension of the ESW, but also enables higher rate capabilities and mitigates aluminum dissolution for batteries with organic electrolytes, are meticulously explained. Further, we thoroughly discuss the importance of high-voltage stability in aqueous battery systems by exploiting the changed properties observed with higher concentrations of salts. To finish, high-voltage supercapacitors enabled by superconcentrated electrolytes are also explored.

25 ENERGY STORAGE↗
DOE OSTI2025

Tunable Stabilization of Cuprous Ions via Kinetic and Thermodynamic Control of Cu Electrodeposition in Non-Aqueous Media

In this work, significant stabilization of Cu + ions is achieved in non-aqueous electrolytes containing TFSI - and Cl - anions with diglyme as solvent. When Cl - is absent, stabilization of Cu + occurs due to the very low stability constant of Cu 2+ in diglyme. However, in the presence of relatively low Cl - concentrations (i.e., equimolar relative to Cu 2+ ), both Cu + and Cu 2+ form extremely stable Cu 2+ / + [Cl - ] complexes resulting in a similar to 1200 mV negative shift of the Cu + /0 redox couple relative to that of more easily reduced Cu + [TFSI - ][Cl - ] complexes. Furthermore, these results suggest that the lower solvation energies and wider electrochemical stability windows of non-aqueous solvents relative to water enable anions to play a much more significant role in guiding complexation behavior-providing new possibilities for (electro)chemical stabilization of reactive intermediates and highlighting the wealth of unexplored opportunities for electrolyte design in non-aqueous systems.

Anion Association↗
DOE OSTI2021

Hydrophobic Molecule Monolayer Brush-Tethered Zinc Anodes for Aqueous Zinc Batteries

Aqueous zinc batteries are of great interest as a rechargeable energy storage system, particularly owing to the low cost and high safety of aqueous electrolytes, as well as the high capacity of zinc anodes. Unfortunately, the wide commercialization of aqueous zinc batteries is impeded by the irreversible water reduction and irregular zinc evolution issues on the anode side. Hereby, a hydrophobic and ultrathin polystyrene molecule brush layer is tethered onto the surface of zinc metal anodes to tackle the above limitations. Here, experimental investigations reveal that the waterproof artificial layer can sustain fast interfacial ionic transportation, minimize hydrogen evolution, and smoothen Zn deposition, thus conferring enhanced electrochemical performance to the as-protected Zn anode in both symmetric Zn//Zn cells and Zn//LiV 3 O 8 full cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

The electrolyte comprising more robust water and superhalides transforms Zn-metal anode reversibly and dendrite-free

A great challenge for all aqueous batteries, including Zn-metal batteries, is the parasitic hydrogen evolution reaction on the low-potential anode. Herein, we report the formula of a highly concentrated aqueous electrolyte that mitigates hydrogen evolution by transforming water molecules more inert. The electrolyte comprises primarily ZnCl 2 and LiCl as an additive, both of which are inexpensive salts. The O–H covalent bonds in water get strengthened in a chemical environment that has fewer hydrogen bonding interactions and a greater number of Zn–Cl superhalides, as suggested by integrated characterization and simulation. As a result, the average Coulombic efficiency of zinc-metal anode is raised to an unprecedented >99.7% at 1 mA cm –2 . In the new electrolyte, the plating/stripping processes leave the zinc-metal anode dendrite-free, and the zinc-metal anode delivers stable plating/stripping cycles for 4000 hours with an areal capacity of 4 mAh cm –2 at 2 mA cm –2 . Furthermore, the high Coulombic efficiency of zinc-metal anode in the ZnCl 2 -LiCl mixture electrolyte is demonstrated in full cells with a limited anode. The V 2 O 5 ·H 2 O| |Zn full cell with an N/P mass ratio of 1.2 delivers a stable life of more than 2500 cycles, and the LiMn 2 O 4 | |Zn hybrid cell with an N/P mass ratio of 0.6 exhibits 1500 cycles in its stable life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Electrode/Electrolyte Coupling on Birnessite (δ-MnO 2 ) Mechanical Response and Degradation

Understanding the deformation of energy storage electrodes at a local scale and its correlation to electrochemical performance is crucial for designing effective electrode architectures. In this work, the effect of electrolyte cation and electrode morphology on birnessite (δ-MnO 2 ) deformation during charge storage in aqueous electrolytes was investigated using a mechanical cyclic voltammetry approach via operando atomic force microscopy (AFM) and molecular dynamics (MD) simulation. In both K 2 SO 4 and Li 2 SO 4 electrolytes, the δ-MnO 2 host electrode underwent expansion during cation intercalation, but with different potential dependencies. When intercalating Li + , the δ-MnO 2 electrode presents a nonlinear correlation between electrode deformation and electrode height, which is morphologically dependent. Further, these results suggest that the stronger cation–birnessite interaction is the reason for higher local stress heterogeneity when cycling in Li 2 SO 4 electrolyte, which might be the origin of the pronounced electrode degradation in this electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Choline Chloride-Based Water-in-Salt Electrolyte for Efficient Iron Electrodeposition

Electrochemical production of iron is a promising low-cost and modular approach to replace the traditional blast furnace. Aqueous electrolytes for iron electrolysis are advantageous as they can be operated at near-ambient temperatures, but they suffer from inefficiencies due to the parasitic hydrogen evolution reaction. In this work, we identify a new water-in-salt electrolyte (WiSE) based on choline chloride (ChCl) for high coulombic efficiency (>85%) iron deposition. Electrochemical analysis of the partial current densities of iron plating and hydrogen co-evolution revealed that, at optimal WiSE compositions, water reduction is kinetically suppressed resulting in an increase in the Fe plating efficiency. Decreased coordination of water and increased coordination of choline’s alcohol group with the Fe 2+ ion were observed through 1 H NMR providing evidence that water reduction is kinetically suppressed in WiSE. Additionally, Raman spectroscopy revealed that complexation effects (with Cl – ) reduce Fe 2+ diffusion coefficients and corresponding limiting currents as the ChCl concentration is increased. This results in an optimal WiSE composition (4 M ChCl + 1 M FeCl 2 ) that provides kinetic suppression of HER but also low transport resistance to Fe plating yielding 85% coulombic efficiency at high current densities.

Sinclair, Nicholas Scott [Case Western Reserve Uni↗
NASA NTRS2007

Lithium Dinitramide as an Additive in Lithium Power Cells

Lithium dinitramide, LiN(NO2)2 has shown promise as an additive to nonaqueous electrolytes in rechargeable and non-rechargeable lithium-ion-based electrochemical power cells. Such non-aqueous electrolytes consist of lithium salts dissolved in mixtures of organic ethers, esters, carbonates, or acetals. The benefits of adding lithium dinitramide (which is also a lithium salt) include lower irreversible loss of capacity on the first charge/discharge cycle, higher cycle life, lower self-discharge, greater flexibility in selection of electrolyte solvents, and greater charge capacity. The need for a suitable electrolyte additive arises as follows: The metallic lithium in the anode of a lithium-ion-based power cell is so highly reactive that in addition to the desired main electrochemical reaction, it engages in side reactions that cause formation of resistive films and dendrites, which degrade performance as quantified in terms of charge capacity, cycle life, shelf life, first-cycle irreversible capacity loss, specific power, and specific energy. The incidence of side reactions can be reduced through the formation of a solid-electrolyte interface (SEI) a thin film that prevents direct contact between the lithium anode material and the electrolyte. Ideally, an SEI should chemically protect the anode and the electrolyte from each other while exhibiting high conductivity for lithium ions and little or no conductivity for electrons. A suitable additive can act as an SEI promoter. Heretofore, most SEI promotion was thought to derive from organic molecules in electrolyte solutions. In contrast, lithium dinitramide is inorganic. Dinitramide compounds are known as oxidizers in rocket-fuel chemistry and until now, were not known as SEI promoters in battery chemistry. Although the exact reason for the improvement afforded by the addition of lithium dinitramide is not clear, it has been hypothesized that lithium dinitramide competes with other electrolyte constituents to react with lithium on the surface of the anode to form a beneficial SEI. Apparently, nitrides and oxides that result from reduction of lithium dinitramide on the anode produce a thin, robust SEI different from the SEIs formed from organic SEI promoters. The SEI formed from lithium dinitramide is more electronically insulating than is the film formed in the presence of an otherwise identical electrolyte that does not include lithium dinitramide. SEI promotion with lithium dinitramide is useful in batteries with metallic lithium and lithium alloy anodes.

Gorkovenko, Alexander A.↗
DOE OSTI2024

The Interplay of Solvation and Polarization Effects on Ion Pairing in Nanoconfined Electrolytes

The nature of ion–ion interactions in electrolytes confined to nanoscale pores has important implications for energy storage and separation technologies. However, the physical effects dictating the structure of nanoconfined electrolytes remain debated. Here we employ machine-learning-based molecular dynamics simulations to investigate ion–ion interactions with density functional theory level accuracy in a prototypical confined electrolyte, aqueous NaCl within graphene slit pores. We find that the free energy of ion pairing in highly confined electrolytes deviates substantially from that in bulk solutions, observing a decrease in contact ion pairing but an increase in solvent-separated ion pairing. These changes arise from an interplay of ion solvation effects and graphene’s electronic structure. Notably, the behavior observed from our first-principles-level simulations is not reproduced even qualitatively with the classical force fields conventionally used to model these systems. The insight provided in this work opens new avenues for predicting and controlling the structure of nanoconfined electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrochemical Separation of Ag 2 S and Cu 2 S from Molten Sulfide Electrolyte

The production of precious metals from Cu-rich sources such as ore products or secondary sources is slow and complex largely due to limited solubility in aqueous electrolytes. This results in sequential processing with various electrolytes and chemistries, where first Cu is electrorefined, followed by Ag, followed by Au and the platinum group metals. These are separate processes, often conducted in separate electrorefining and electrowinning facilities. The chemical properties of molten sulfides, and their ability to operate at a temperature where liquid metal cathodes are used, suggest the possibility of an alternative, streamlined processing route for Cu and precious metals. Unfortunately, little thermodynamic or electrochemical information is available regarding the behavior of Cu and precious metal sulfides in molten sulfide electrolytes. Herein, the relative activity of the Cu 2 S-Ag 2 S pseudobinary dissolved in a BaS-La 2 S 3 supporting electrolyte is measured at 1523 K. It was found that the supporting electrolyte favors mixing with Ag 2 S over Cu 2 S. Molten sulfide electrolysis of Cu and Ag was conducted, with results in good agreement with the thermodynamic model. It is found that the Ag-Cu cathode chemistry will influence the electrochemical selectivity in the Ag-Cu-Ba-La-S system.

25 ENERGY STORAGE↗