SEARCH · Engineering Papers

Results for “algebraic methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Enhancing photoionization rate calculations in low-temperature plasmas using spectral methods

Photoionization plays a central role in the development of streamer discharges and other non-equilibrium plasma phenomena. It creates seed electrons, which are essential for positive streamer propagation, allowing the ionization front to move forward. Because of this, accurate modeling of photoionization is very important for predicting streamer behavior and plasma evolution. The photoionization process in air (N 2 – O 2 mixture) is often described by the Zheleznyak model (1982). This model is usually solved through Helmholtz-type equations that approximate the Zheleznyak photoionization model (Zheleznyak et al. 1982) as Partial Differential Equations (PDEs). Conventional numerical methods, such as the Finite Difference Method (FDM) or Finite Volume Method (FVM), are widely used to solve these equations. Although they are prevalent, the computational cost of these methods due to their need for matrix operations and iterative solver is demanding. To address this challenge, this work develops a spectral solver based on the Fast Fourier Transform (FFT) combined with Discrete Cosine Transform (DCT) and Discrete Sine Transform (DST) to calculate the photoionization rate efficiently in an axisymmetric cylindrical domain. This method naturally satisfies the boundary conditions used in the model and converts the PDE into algebraic ones in spectral space. Thus, avoids the need for iterative matrix solvers. When compared with FDM results, it is demonstrated that the new solver not only maintains accuracy, but also reduces the computational cost, showing a performance increase of approximately 100 compared to FDM over a wide range of problem sizes. The method is parallelized using Message Passing Interface (MPI) and has been integrated into a fluid plasma model for streamer simulation. Here, this FFT-based approach provides a fast and reliable alternative for calculating photoionization in fluid models, helping large-scale plasma simulations run faster and efficiently, and allows higher-resolution simulation without extra computational cost.

Axisymmetric system↗

DOE OSTI2024

Improved Evaluation of Large Network Matrices for Linear Power Flow Within Optimization Problems

This work presents methods for evaluating the Power Transfer Distribution Factor (PTDF) and Line Outage Distribution Factor (LODF) matrices by employing sparse linear algebra for large-scale computing applications. These matrices play a critical role in many power system applications, such as the Unit Commitment Problem (UC), pre- and post-contingency power flow analysis, and transmission expansion. These matrices are typically dense, which means they require a significant amount of time and memory to be computed for large networks. However, by analyzing the structure of the matrices and their computation method, it is possible to use reduced memory methods based on sparse matrix operations. This paper shows that sparse linear algebra algorithms are faster and require less memory and time than traditional dense approaches. Additionally, we explore the effect of matrix sparsification by eliminating trailing digits on power flow calculations.

large scale↗

DOE OSTI2025

Repartitioning the Hamiltonian in many-body second-order Brillouin–Wigner perturbation theory: Uncovering new size-consistent models

Second-order Møller-Plesset perturbation theory is well-known as a computationally inexpensive approach to the electron correlation problem that is size-consistent with a size-consistent reference but fails to be regular. On the other hand, the less well-known many-body version of Brillouin-Wigner perturbation theory has the reverse properties: it is regular but fails to be size-consistent when used with the standard MP partitioning. Consequently, its widespread use remains limited. In this work, we analyze the ways in which it is possible to use alternative non-MP partitions of the Hamiltonian to yield variants of BW2 that are size-consistent as well as regular. We show that there is a vast space of such BW2 theories and also show that it is possible to define a repartitioned BW2 theory from the ground state density alone, which regenerates the exact correlation energy. We also provide a general recipe for deriving regular, size-consistent, and size-extensive partitions from physically meaningful components, and we apply the result to small model systems. The scope of these results appears to further set the stage for a revival of BW2 in quantum chemistry.

Ab initio perturbation↗

DOE OSTI2026

A simple fourth order propagator based on the Magnus expansion in the Liouville space: Application to a Λ-system and assessment of the rotating wave approximation

A simple fourth-order propagator [Ture and Jang, J. Phys. Chem. A 128, 2871 (2024)] based on the Magnus expansion is extended to the Liouville space for both closed-system and Lindbladian open-system quantum dynamics. For both dynamics, commutator free versions of fourth-order propagators are provided as well. These propagators are then applied to the dynamics of a driven Λ-system, where Lindblad terms represent the effect of a photonic bath. For both dynamics, the accuracy of the rotating wave approximation (RWA) for the matter–radiation interaction is assessed. We confirmed reasonable performance of RWA for weak and resonant fields. However, small errors appear for moderate fields and substantial errors can be found for strong fields where coherent population trapping can still be expected. We also found that the presence of bath for open-system quantum dynamics consistently reduces the errors of the RWA. These results provide quantitative information on how the RWA breaks down beyond weak field or for non-resonant cases. Major results are benchmarked against results of our sixth-order ME-based propagator. Finally, we also provide numerical comparison of our algorithms with other fourth-order algorithms for the Λ-system. These confirm reasonable performance of our simple propagators and the improvement gained through commutator-free expressions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

A modified model parametrization algorithm for solving a special type of heat and mass transfer systems

A new method for solving nonlinear heat and mass transfer design tasks was considered. Systems using the Number of Transfer Units (NTU) method are a special type of mathematical model of heat and mass exchangers. It was observed, that the NTU models in a form of differential-algebraic equations (DAEs) cannot be directly solved with higher values of NTU. The requirements for consistent initial conditions, as well as numerical limitations of DAEs solvers, result, that the solution to the considered design problems that cannot be obtained by a classical direct shooting procedure. To overcome the presented difficulties, the αDAE model optimization algorithm was adjusted for solving NTU-based models. The new approach consists of 3 main steps: 1) task discretization by a multiple-shooting approach, 2) design an appropriate function $f_{NTU}$(α) to effectively influence the variability of the state variables described by dynamical relations, 3) the iterative numerical optimization algorithm for the new parametrized system. Moreover, computations can be performed by a chosen numerical optimization approach, which can be communicated with an available outer procedure for solving differential-algebraic equations. The presented algorithm was implemented and applied to solve the design task with the NTU model of a counter-flow exchanger. Here, the new approach was used to modify the system dynamics to influence the difficulty of the considered problem. Finally, the presented method enabled failure-free numerical computations for the higher values of the NTU parameter.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Strong-Weak Duality via Jordan-Wigner Transformation: Using Fermionic Methods for Strongly Correlated su(2) Spin Systems

The Jordan-Wigner transformation establishes a duality between $su(2)$ and fermionic algebras. We present qualitative arguments and numerical evidence that when mapping spins to fermions, the transformation makes strong correlation weaker, as demonstrated by the Hartree-Fock approximation to the transformed Hamiltonian. This result can be rationalized in terms of rank reduction of spin shift terms when transformed to fermions. Conversely, the mapping of fermions to qubits makes strong correlation stronger, complicating its solution when one uses qubit-based correlators. The presence of string operators poses challenges to the implementation of quantum chemistry methods on classical computers, but these can be dealt with using established techniques of low computational cost. Here, our proof of principle results for XXZ and J1-J2 Heisenberg (in 1D and 2D) indicate that the JW transformed fermionic Hamiltonian has reduced complexity in key regions of their phase diagrams, and provides a better starting point for addressing challenging spin problems.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2024

Efficient Unitary Designs from Random Sums and Permutations

A unitary k-design is an ensemble of unitaries that matches the first k moments of the Haar measure. In this work, we provide two efficient constructions of k-designs on n-qubits using new random matrix theory techniques. Our first construction is based on exponentiating sums of random i.i.d. Hermitian matrices and uses O(k2n2)-many gates. In the spirit of central limit theorems, we show that this random sum approximates the Gaussian Unitary Ensemble (GUE). We then show that the product of just two exponentiated GUE matrices is already approximately Haar random. Our second construction is based on products of exponentiated sums of random permutations and uses Õ(k poly (n)) many gates. The k dependence is optimal (up to polylogarithmic factors) and is inherited from the efficiency of existing k-wise independent permutations. Furthermore, replacing random permutations with quantum-secure pseudorandom permutations (PRPs), we also obtain a pseudorandom unitary (PRU) ensemble that is secure under nonadaptive queries. A central feature of both proofs is a new connection between the polynomial method in quantum query complexity and the large-dimension (N) expansion in random matrix theory. In particular, the first construction uses the polynomial method to control high moments of certain random matrix ensembles without requiring delicate Weingarten calculations. In doing so, we define and solve a moment problem on the unit circle, asking whether a finite number of equally weighted points can reproduce a given set of moments. In our second construction, the key step is to exhibit an orthonormal basis for irreducible representations of the partition algebra that has a low-degree large-N expansion. This allows us to show that the distinguishing probability is a low-degree rational polynomial of the dimension N.

algebra↗

DOE OSTI2020

Approximate inverse-based block preconditioners in poroelasticity

We focus on the fully implicit solution of the linear systems arising from a three-field mixed finite element approximation of Biot’s poroleasticity equations. The objective is to develop algebraic block preconditioners for the efficient solution of such systems by Krylov subspace methods. In this work, we investigate the use of approximate inverse-based techniques to decouple the native system of equations and obtain explicit sparse approximations of the Schur complements related to the physics-based partitioning of the unknowns by field type. Here, the proposed methods are tested in various numerical experiments including real-world applications dealing with petroleum and geotechnical engineering.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Numerical solution of large scale Hartree–Fock–Bogoliubov equations

The Hartree–Fock–Bogoliubov (HFB) theory is the starting point for treating superconducting systems. However, the computational cost for solving large scale HFB equations can be much larger than that of the Hartree–Fock equations, particularly when the Hamiltonian matrix is sparse, and the number of electrons N is relatively small compared to the matrix size N b . We first provide a concise and relatively self-contained review of the HFB theory for general finite sized quantum systems, with special focus on the treatment of spin symmetries from a linear algebra perspective. We then demonstrate that the pole expansion and selected inversion (PEXSI) method can be particularly well suited for solving large scale HFB equations. For a Hubbard-type Hamiltonian, the cost of PEXSI is at most $\mathcal{O}$(N b 2 ) for both gapped and gapless systems, which can be significantly faster than the standard cubic scaling diagonalization methods. We show that PEXSI can solve a two-dimensional Hubbard-Hofstadter model with N b up to 2.88 × 10 6 , and the wall clock time is less than 100 s using 17 280 CPU cores. Finally, this enables the simulation of physical systems under experimentally realizable magnetic fields, which cannot be otherwise simulated with smaller systems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

NCCS High Performance GMRES Mixed Precision

HPG-MxP is a software package that performs a fixed number of multigrid preconditioned (using a Gauss-Seidel smoother) Generalized minimal residual (PGMRES) iterations in order to solve a possibly nonsymmetric large sparse linear system of equations. It is designed to be a benchmark to measure a computer's performance for sparse linear algebra workloads typical in scientific computing while allowing the use of mixed precision methods. The solution is required to have convergence characteristics and accuracy similar to double precision GMRES. It is based on the High Performance Conjugate Gradient Benchmark (HPCG) which restricts all implementations to use only the IEEE double precision format (FP64). The original implementation (https://github.com/hpg-mxp/hpg-mxp) was written by Ichitaro Yamazaki, Jennifer Loe, Christian Glusa, Sivasankaran Rajamanickam, Piotr Luszczek, and Jack Dongarra. Please refer to that repository for documentation on the original implementation. This version is maintained by the National Center for Computational Sciences at Oak Ridge National Laboratory. It is highly scalable and optimized for Oak Ridge Leadership Computing Facility (OLCF) systems, particularly Frontier.

Kashi, Aditya [Oak Ridge National Laboratory (ORNL↗

DOE OSTI2022

Fast Solution of Fully Implicit Runge--Kutta and Discontinuous Galerkin in Time for Numerical PDEs, Part II: Nonlinearities and DAEs

Fully implicit Runge--Kutta (IRK) methods have many desirable accuracy and stability properties as time integration schemes, but high-order IRK methods are not commonly used in practice with large-scale numerical PDEs because of the difficulty of solving the stage equations. This paper introduces a theoretical and algorithmic framework for solving the nonlinear equations that arise from IRK methods (and discontinuous Galerkin discretizations in time) applied to nonlinear numerical PDEs, including PDEs with algebraic constraints. Several new linearizations of the nonlinear IRK equations are developed, offering faster and more robust convergence than the often-considered simplified Newton, as well as an effective preconditioner for the true Jacobian if exact Newton iterations are desired. Inverting these linearizations requires solving a set of block 2 x 2 systems. Under quite general assumptions, it is proven that the preconditioned 2 x 2 operator's condition number is bounded by a small constant close to one, independent of the spatial discretization, spatial mesh, and time step, and with only weak dependence on the number of stages or integration accuracy. Moreover, the new method is built using the same preconditioners needed for backward Euler-type time stepping schemes, so can be readily added to existing codes. The new methods are applied to several challenging fluid flow problems, including the compressible Euler and Navier--Stokes equations, and the vorticity-streamfunction formulation of the incompressible Euler and Navier--Stokes equations. Up to 10th-order accuracy is demonstrated using Gauss IRK, while in all cases fourth-order Gauss IRK requires roughly half the number of preconditioner applications as required by standard Singly diagonally implicit Runge--Kutta methods.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Front propagation formulation for large eddy simulation of turbulent premixed flames

The front propagation formulation (FPF) for large eddy simulation (LES) of turbulent premixed flames is presented and discussed. The FPF method adopts a regularized Dirac delta function to minimize the spurious propagation of under-resolved filtered flame fronts in LES, while reproducing the reaction characteristics of premixed flame fronts. Here, the extension of the FPF method to LES and the relation to existing sub-filter combustion models are discussed. An algebraic model for the regularized Dirac delta function is presented and validated using direct numerical simulation (DNS) data for statistically planar premixed flames propagating in homogeneous isotropic turbulence. A posteriori validation for a filtered 1-D planar laminar flame is performed to demonstrate the characteristics of FPF in reproducing the propagation speed and the thickness of the under-resolved flame front. LES of a turbulent Bunsen flame is also performed to demonstrate the performance of the proposed method.

42 ENGINEERING↗

DOE OSTI2023

Neutron (and other Particle) Transport at LANL: An Overview [Presentation]

For decades, Los Alamos National Laboratory has been at the forefront of neutron transport methods research and code development. One such code is PARTISN, the LANL parallel time-dependent discrete ordinate neutron transport code. In this presentation, we describe the various research efforts currently underway by the PARTISN and other code teams. Some examples of current research are a block automated mesh refinement scheme, the application of tensor trains to the discretized neutron transport equation, and GPU code porting. The block automated mesh refinement scheme uses cross section information to refine and coarsen the solution mesh to improve time to solution and reduce memory. The tensor train approach expresses discretized transport operators as tensor products of vectors and matrices to compress the size of linear systems being solved by transport codes. Rather than relying on matrix-free methods such as the transport sweep, we have access to an operator that can be inverted, reshaped, or manipulated algebraically. Finally, we describe how PARTISN is used, what problems we are looking to solve, and what the future holds for neutron transport at LANL. In addition to this, we briefly describe the various research efforts in other particle transport teams using both deterministic and Monte Carlo methods. In the presentation, we list possible opportunities for collaboration between the laboratory and faculty and students.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

BoBa

BoBa is a C++ software library for working with large matrices, tensors, and tensor decompositions. The library provides tools for dense matrix and tensor operations, tensor decompositions, and tensor decomposition methods that support modern CPU and GPU architectures. It includes portable abstractions for linear algebra, tensor algebra, and multidimensional computation. BoBa is intended for scientific computing applications that involve large multidimensional data sets or high dimensional mathematical models. Its capabilities support tasks such as data compression, linear algebra, efficient numerical computation, and the development of scalable algorithms for heterogeneous hardware. Tutorials, tests, and example applications are included to help users learn and apply the library.

Yao, Jin [Lawrence Livermore National Laboratory (↗

DOE OSTI2021

CSRI Summer Proceedings 2021

The Computer Science Research Institute (CSRI) brings university faculty and students to Sandia National Laboratories for focused collaborative research on Department of Energy (DOE) computer and computational science problems. The institute provides an opportunity for university researches to learn about problems in computer and computational science at DOE laboratories, and help transfer results of their research to programs at the labs. Some specific CSRI research interest areas are: scalable solvers, optimization, algebraic preconditioners, graph-based, discrete, and combinatorial algorithms, uncertainty estimation, validation and verification methods, mesh generation, dynamic load-balancing, virus and other malicious-code defense, visualization, scalable cluster computers, beyond Moore’s Law computing, exascale computing tools and application design, reduced order and multiscale modeling, parallel input/output, and theoretical computer science. The CSRI Summer Program is organized by CSRI and includes a weekly seminar series and the publication of a summer proceedings.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

CSRI Summer Proceedings 2021

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Large-Scale Materials Modeling at Quantum Accuracy: Ab Initio Simulations of Quasicrystals and Interacting Extended Defects in Metallic Alloys

Ab initio electronic-structure has remained dichotomous between achievable accuracy and length-scale. Quantum many-body (QMB) methods realize quantum accuracy but fail to scale. Density functional theory (DFT) scales favorably but remains far from quantum accuracy. We present a framework that breaks this dichotomy by use of three interconnected modules: (i) invDFT: a methodological advance in inverse DFT linking QMB methods to DFT; (ii) MLXC: a machine-learned density functional trained with invDFT data, commensurate with quantum accuracy; (iii) DFT-FE-MLXC: an adaptive higher-order spectral finite-element (FE) based DFT implementation that integrates MLXC with efficient solver strategies and HPC innovations in FE-specific dense linear algebra, mixed-precision algorithms, and asynchronous compute-communication. Furthermore, we demonstrate a paradigm shift in DFT that not only provides an accuracy commensurate with QMB methods in ground-state energies, but also attains an unprecedented performance of 659.7 PFLOPS (43.1% peak FP64 performance) on 619,124 electrons using 8,000 GPU nodes of Frontier supercomputer.

density functional theory↗

DOE OSTI2020

Spectral Mesh-Free Quadrature for Planar Regions Bounded by Rational Parametric Curves

This article presents spectral, mesh-free, Green’s theorem-based numerical quadrature schemes for integrating functions over planar regions bounded by rational parametric curves. Our algorithm proceeds in two steps: (1) We first find intermediate quadrature rules for line integrals along the region’s boundary curves corresponding to Green’s theorem. (2) We then use a high-order quadrature rule to compute the numerical antiderivative of the integrand along a coordinate axis, which is used to evaluate the Green’s theorem line integral. We present two methods to compute the intermediate quadrature rule. The first is spectrally accurate (it converges faster than any algebraic order with respect to number of quadrature points) and is relatively easy to implement, but has no guarantee of polynomial exactness. The second guarantees exactness for polynomial integrands up to a pre-specified degree with an a priori-known number of quadrature points and retains the convergence properties of the first, but is slightly more complicated. The quadrature schemes have applications to computation of geometric moments, immersogeometric analysis, conservative field transfer between high-order meshes, and initialization of multi-material simulations with rational geometry. We compare the quadrature schemes produced using our method to other methods in the literature and show that they are much more efficient both in terms of number of quadrature points and computational time. We provide an open-source implementation of the algorithm in MATLAB.

97 MATHEMATICS AND COMPUTING↗