SEARCH · Engineering Papers

Results for “adsorption process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Targeted electrochemical reduction of carcinogenic N -nitrosamines from emission control systems within CO 2 capture plants

N-Nitrosamines are one of the environmentally significant byproducts from aqueous amine-based post-combustion carbon capture systems (CCS) due to their potential risk to human health. Safely mitigating nitrosamines before they are emitted from these CO 2 capture systems is therefore a key concern before widescale deployment of CCS can be used to address worldwide decarbonization goals. Electrochemical decomposition is one viable route to neutralize these harmful compounds. The circulating emission control waterwash system, commonly installed at the end of the flue gas treatment trains to minimize amine solvent emissions, plays an important role to capture N-nitrosamines and control their emission into the environment. The waterwash solution is the last point where these compounds can be properly neutralized before becoming an environmental hazard. In this study, the decomposition mechanisms of N-nitrosamines in a simulated CCS waterwash with residual alkanolamines was investigated using several laboratory-scale electrolyzers utilizing carbon xerogel (CX) electrodes. Hcell experiments revealed that N-nitrosamines were decomposed through a reduction reaction and are converted into their corresponding secondary amines thereby neutralizing their environmental impact. Batch-cell experiments statistically examined the kinetic models of N-nitrosamine removal by a combined adsorption and decomposition processes. The cathodic reduction of the N-nitrosamines statistically obeyed the first-order reaction model. Finally, a prototype flow-through reactor using an authentic waterwash was used to successfully target and decompose N-nitrosamines to below the detectable level without degrading the amine solvent compounds allowing them to be return to the CCS and lower the system operating costs. Furthermore, the developed electrolyzer was able to efficiently remove greater than 98% of N-nitrosamines from the waterwash solution without producing any additional environmentally harmful compounds and offers an effective and safe route to mitigate these compounds from CO 2 capture systems.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2025

Hydrogen charging and desorption from microstructural viewpoint: A method for deconvoluting hydrogen desorption spectra and unveiling the hydrogen-microstructure interaction

Understanding the interaction of hydrogen with microstructural features in metallic materials is crucial for designing hydrogen-resistant alloys. Although thermal desorption spectroscopy (TDS) is widely used for investigating the hydrogen binding behavior of various microstructural features, its application to face-centered cubic (fcc) metals and alloys that exhibit low hydrogen diffusivity is limited due to the lumped TDS desorption signals. This paper shows that, by coupling a Sofronis–McMeeking type hydrogen transport model with a microstructure-informed finite-element model, TDS data can be deconvoluted to reveal the underlying adsorption–diffusion–desorption processes, hydrogen diffusivity, and trap-binding energies. In conclusion, the austenitic steel SS316L in solution-annealed condition is used as a demonstration material, and we focused on investigating the interaction of deuterium (hydrogen isotope) with grain boundaries, which is difficult to investigate from experiments alone but critical for design of alloys for hydrogen infrastructure.

Finite element simulation, Polycrystalline Microst↗

DOE OSTI2023

Elucidating Trivalent Ion Adsorption at Floating Carboxylic Acid Monolayers: Charge Reversal or Water Reorganization?

Here we study the adsorption of trivalent neodymium on floating arachidic acid films at the air–water interface by two complementary surface specific probes, sum frequency generation spectroscopy and X-ray fluorescence near total reflection. In the absence of background ions, neodymium ions compensate for the surface charge of the arachidic acid film at a bulk concentration of 50 μM without any charge reversal. Increasing the bulk concentration to 1 mM does not change the neodymium surface coverage but affects the interfacial water structure significantly. In the presence of a high concentration of NaCl, there is overcharging at 1 mM Nd 3+ , i.e., 30% more Nd 3+ than needed to compensate for the surface charge. These results show that the total coverage of neodymium ions is not enough to describe the complete picture at the interface, and interfacial water and ion coverage needs to be considered together to understand more complex ion adsorption and transport processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Abstract Superconducting radio-frequency (SRF) resonator cavities provide extremely high quality factors > 10 10 at 1–2 GHz and 2 K in large linear accelerators of high-energy particles. The maximum accelerating field of SRF cavities is limited by penetration of vortices into the superconductor. Present state-of-the-art Nb cavities can withstand up to 50 MV/m accelerating gradients and magnetic fields of 200–240 mT which destroy the low-dissipative Meissner state. Achieving higher accelerating gradients requires superconductors with higher thermodynamic critical fields, of which Nb 3 Sn has emerged as a leading material for the next generation accelerators. To overcome the problem of low vortex penetration field in Nb 3 Sn, it has been proposed to coat Nb cavities with thin film Nb 3 Sn multilayers with dielectric interlayers. Here, we report the growth and multi-technique characterization of stoichiometric Nb 3 Sn/Al 2 O 3 multilayers with good superconducting and RF properties. We developed an adsorption-controlled growth process by co-sputtering Nb and Sn at high temperatures with a high overpressure of Sn. The cross-sectional scanning electron transmission microscope images show no interdiffusion between Al 2 O 3 and Nb 3 Sn. Low-field RF measurements suggest that our multilayers have quality factor comparable with cavity-grade Nb at 4.2 K. These results provide a materials platform for the development and optimization of high-performance SIS multilayers which could overcome the intrinsic limits of the Nb cavity technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Modulation of CO 2 adsorption in novel pillar-layered MOFs based on carboxylate–pyrazole flexible linker

Metal–organic frameworks (MOFs) have attracted significant attention as sorbents due to their high surface area, tunable pore volume and pore size, coordinatively unsaturated metal sites, and ability to install desired functional groups by post-synthetic modification. Herein, we report three new MOFs with pillar–paddlewheel structures that have been synthesized solvothermally from the mixture of the carboxylate–pyrazole flexible linker (H 2 L), 4,4-bipyridine (BPY)/triethylenediamine (DABCO), and Zn(II)/Cu(II) ions. The MOFs obtained, namely [Zn II (L)BPY], [Cu II (L)BPY], and [Cu II (L)DABCO], exhibit two-fold interpenetration and dinuclear paddle–wheel nodes. The Zn(II)/Cu(II) cations are coordinated by two equatorial L linkers that result in two-dimensional sheets which in turn are pillared by BPY or DABCO in the perpendicular direction to obtain a neutral three-dimensional framework that shows one-dimensional square channels. The three pillar-layered MOFs were characterized as microporous materials showing high crystalline stability after activation at 120 °C and CO 2 adsorption. All MOFs contain uncoordinated Lewis basic pyrazole nitrogen atoms in the framework which have an affinity toward CO 2 and hence could potentially serve as CO 2 adsorption material. The CO 2 uptake capacity was initially enhanced by replacing Zn with Cu and then replacing the pillar, going from BPY to DABCO. Overall, all the MOFs exhibit low isosteric heat (Q st ) of adsorption which signifies an advantage due to the energy required for the adsorption and regeneration processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

pH-dependent reactivity of water at MgO(100) and MgO(111) surfaces

Facet-dependent surface charging of metal oxides in water dominates the ion transport behavior across the interface, in turn impacting many natural and industrial processes such as adsorption, the formation and stabilization of nanoparticle suspensions, corrosion, and heterogeneous catalysis. Here we investigated the pH-dependent surface chemistry of two low-index MgO single crystal surfaces, namely MgO(100) and MgO(111), using vibrational sum frequency generation (vSFG) spectroscopy. This allowed us to evaluate facet-dependent pH effects on the hydration and hydroxylation at the solid/aqueous interface and point-of-zero charge (PZC) values. The MgO system is complicated by its thermodynamic instability with respect to Mg(OH) 2 in water at ambient conditions. Here, for both hydroxylated MgO(100) and MgO(111) surfaces, the PZC is found to be around pH ∼ 12, which compares well with reported values for MgO single crystal and nanoparticle surfaces. However, structure specific differences in the molecular water hydrogen bonding network near the surface are evident at mildly acidic pH. To our knowledge, this is the first account of the PZC values for the MgO(111) single-crystal surface, an electrostatically unstable MgO termination that is prone to reconstruction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Probing the Structure and Dynamics of Fluid Mixtures in Porous Materials Through Ultrafast Vibrational Spectro-Microscopy and Many-Body Molecular Dynamics

This research program focused on the characterization of both molecular structure and dynamics of aqueous solutions in various metal-organic frameworks (MOFs) and organic polymers that have recently been proposed for applications in water treatment technologies. This was accomplished by integrating ultrafast vibrational spectroscopy and microscopy, which are sensitive to local environments, molecular orientation, and dynamical couplings, with many-body molecular dynamics (MB-MD) simulations, which enable realistic modeling of aqueous systems and porous materials under different thermodynamic conditions. Our studies allowed for identifying the physical mechanisms and characterizing the underlying molecular interactions between water and host materials that determine the adsorption and transport processes of water in various MOFs and β-cyclodextrin polymers – prototypical examples of porous materials and polymers, that have recently been proposed for technological applications in water purification. By combining bulk- and surface-sensitive, spatially resolved ultrafast vibrational spectroscopy with MB-MD simulations, it was possible to gain broad insight into the structure and mobility of water under heterogeneous confinement at various length scales. In particular, measurements of surface- and bulk-sensitive vibrational spectra at single crystal level, integrated with MB-MD simulations were used to characterize domain-specific, structure–binding affinity relationships. Besides providing specific information about the behavior of aqueous solutions in prototypical MOFs and organic polymers for potential applications in water treatment technologies, our studies also provided fundamental insights into the properties of aqueous solutions in confined heterogeneous environments, which have broad implications in many areas, ranging from heterogeneous catalysis to oil recovery, ion transport processes, and reaction-diffusion processes in crowded systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Bridging the time scale in exascale computing of chemical systems (Final Technical Report)

This report summarizes the work carried out with support of the United States Department of Energy under Award DE-SC0019441. The theme of this project was to develop and apply methods that allowed for the acceleration of atomistic calculations, particularly in challenging areas such as multiphase systems, electrified interfaces, uncertainty estimation, and applications requiring chemical accuracy, which tend to be applications where simulation time is severely bottlenecked by the computational time requirements. Much of the focus was on the application of emerging machine-learning methodologies, although a wide range of methodologies were employed. This report has two major sections. The first focuses on the methodological advances themselves. Within this part, we report a number of major advances, a few examples of which are described here. We report the first machine-learning scheme for the acceleration of electronically grand-canonical calculations (that is, those applicable to electrochemistry). We report new methods of performing transfer learning, in which physics-based priors can be used to provide predictions, often with uncertainty estimates, of images well outside of training sets; we also offer ways to fine-tune these transfer-learning models. We provide a new systematic means to generate and apply minimal training data sets to very large (10,000’s of atoms) systems, with only small training sets appropriate for electronic structure. We developed new methodologies to integrate surface vibrations into surface adsorption calculations. We made advances to the applicability of diffusion Monte Carlo methods to allow (learned) force prediction, finite-size error correction, and force-free means of searching for transition states. We integrated machine-learned atomistic predictions into mechanism generation codes. Additionally, we released new software including AmpTorch, a modernized version of our original atomistic machine-learning code Amp. The second part of this report focuses on the scientific applications that accompanied, and were often enabled by, the methodological advances described earlier. A few examples follow, but full details are in the individual chapters of the report. For example, we developed a general theory of phonon-induced friction on molecular adsorbates. We showed fundamentally how solvent influences the adsorption and desorption process and how it differs from the processes typically involved at the solid–gas interface, making aqueous-phase and electrocatalysis different from traditional thermocatalysis. We examined how metal–insulator and magnetic transitions can be probed, and accelerated exciton dynamics via Frenkel Hamiltonian parameters. We showed that the nearsighted force-training approach, developed within this project, can predict both the stability and reactivity of large nanoparticles, and can also lead to insights on catalyst coverage on binding energies and entropies. These applied studies, which generally integrated with our method development, allowed us to push forward the theoretical understanding of several reaction classes.

08 HYDROGEN↗

DOE OSTI2021

Effect of surface properties and polymer chain length on polymer adsorption in solution

In polymer nanoparticle composites (PNCs) with attractive interactions between nanoparticles (NPs) and polymers, a bound layer of the polymer forms on the NP surface, with significant effects on the macroscopic properties of the PNCs. The adsorption and wetting behaviors of polymer solutions in the presence of a solid surface are critical to the fabrication process of PNCs. In this study, we use both classical density functional theory (cDFT) and molecular dynamics (MD) simulations to study dilute and semi-dilute solutions of short polymer chains near a solid surface. Using cDFT, we calculate the equilibrium properties of polymer solutions near a flat surface while varying the solvent quality, surface–fluid interactions, and the polymer chain lengths to investigate their effects on the polymer adsorption and wetting transitions. Using MD simulations, we simulate polymer solutions near solid surfaces with three different curvatures (a flat surface and NPs with two radii) to study the static conformation of the polymer bound layer near the surface and the dynamic chain adsorption process. Additionally, we find that the bulk polymer concentration at which the wetting transition in the poor solvent system occurs is not affected by the difference in surface–fluid interactions; however, a threshold value of surface–fluid interaction is needed to observe the wetting transition. We also find that with good solvent, increasing the chain length or the difference in the surface–polymer interaction relative to the surface–solvent interaction increases the surface coverage of polymer segments and independent chains for all surface curvatures. Finally, we demonstrate that the polymer segmental adsorption times are heavily influenced only by the surface–fluid interactions, although polymers desorb more quickly from highly curved surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Alkene adsorption and cracking on acidic zeolites – A gradual process of understanding

Cracking of light alkenes on solid acids and, in particular on zeolites, is ubiquitous in refineries. Different zeolite framework topologies in the catalysts used provide spatial constraints for reactants and products, leading to discrete reaction routes and varying selectivities. The conversion of alkenes in cracking proceeds either via monomolecular or bimolecular reaction pathways. In both routes, the reacting alkene adsorbs first on Brønsted acid sites forming the initial state (e.g., π-complex, carbenium ion or alkoxide), followed by β-cleavage in the carbenium transition state, generating a smaller alkene and a carbenium ion (monomolecular route) or forming a dimer by alkene addition that cracks subsequently (bimolecular route). The current state of understanding alkene sorption and cracking is critically discussed in this paper and four questions are formulated that may be the central questions from our perspective in further developing new generations of catalysts and processes for alkene conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Coupled heat and mass transfer in internally cooled silica gel-coated aluminum foam heat exchangers for dehumidification

Solid desiccant dehumidifiers offer significant potential to improve humidity control in buildings due to their ability to independently regulate latent (humidity) and sensible (temperature) loads. However, adsorption of water vapor by desiccants is an exothermic process; the resulting heat of adsorption increases both the desiccant bed temperature and the temperature of the air flowing over the bed, thereby limiting the performance of desiccant dehumidifiers. To address this problem, desiccant-coated heat exchanger prototypes were developed by coating silica gel onto aluminum foam substrates and integrated with chilled water circulation for effective removal of the heat of adsorption. Prototype heat exchangers with two different pore densities (10 and 20 pores per inch (PPI)) and two different desiccant loadings (∼10.36% and ∼17.80%) were fabricated. Experiments were conducted by varying the inlet air face velocity, chilled water inlet temperature, and chilled water flow rate to investigate the coupled heat and mass transfer characteristics of the prototype heat exchangers over a wide range of operating conditions. The underlying transport mechanisms were analyzed using transient desiccant bed temperature, outlet air temperature, and outlet humidity profiles. The results demonstrate that internal cooling significantly enhances dehumidification performance by maintaining more favorable thermodynamic conditions for water vapor adsorption. Under identical operating conditions, a 20 PPI heat exchanger coated with 25.05 g of silica gel achieved 98.98% higher cumulative water uptake and 97.75% higher moisture removal capacity than the corresponding non-cooled case after 5 min of adsorption. This substantial enhancement was further supported by a validated one-dimensional coupled heat and mass transfer model developed in the present study. To date, this is one of the first experimental studies to systematically investigate the combined effects of internal cooling, foam pore density, and desiccant loading on the performance of silica-gel-coated metal foam heat exchangers under HVAC-relevant operating conditions.

42 ENGINEERING↗

DOE OSTI2021

Automated Adsorption Workflow for Semiconductor Surfaces and the Application to Zinc Telluride

Surface adsorption is a crucial step in numerous processes, including heterogeneous catalysis, where the adsorption of key species is often used as a descriptor of efficiency. We present here an automated adsorption workflow for semiconductors which employs density functional theory calculations to generate adsorption data in a high-throughput manner. Starting from a bulk structure, the workflow performs an exhaustive surface search, followed by an adsorption structure construction step, which generates a minimal energy landscape to determine the optimal adsorbate-surface distance. An extensive set of energy-based, charge-based, geometric, and electronic descriptors tailored toward catalysis research are computed and saved to a personal user database. Finally, the application of the workflow to zinc telluride, a promising CO 2 reduction photocatalyst, is presented as a case study to illustrate the capabilities of this method and its potential as a material discovery tool.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Unveiling stimulation fluid-driven alterations in shale pore architecture through combined interpretation of TD-NMR and multi-component gas adsorption

The hydraulic fracturing stimulation process can alter petrophysical and flow properties of the shale matrix in unconventional reservoirs. These alterations can result from interactions with native and exogenous fluids, and can be detrimental to reservoir productivity. Different experimental procedures have been proposed to study reactive processes and thereby understand the aforementioned interactions. Most published works do not consider the rock initial saturation with formation fluid, or the effect of organic matter (OM). To gain insights into these effects, two reactive experimental sets, differing in experimental conditions, were conducted. In the first set, at 125°C and 45 MPa, a stimulation fluid surrogate was put in contact with Baxter Shale samples, previously saturated and equilibrated with synthetic formation fluid. A baseline consisted of exposure to formation fluid exclusively. In the second set, at 0.08 MPa and 25°C, contact with stimulation fluid took place as in the first set. Two additional assays in this second set either skipped the initial formation fluid saturation or removed the OM, respectively. Petrophysical properties analyses, focused on the pore architecture, relied on the combined interpretation of gas adsorption and Time-Domain Nuclear Magnetic Resonance (TD-NMR). Results show that the presence of the formation fluid significantly restricts pore space accessibility to the stimulation fluid and mitigates the pore-architecture alteration to the macro-pore region. Mineral dissolution and precipitation dominate over surface or wettability alteration. Next, results suggest that the OM restricts accessibility to some pores. Ultimately, the equilibration process with synthetic formation fluid drives mainly surface alteration, unhindered by OM.

58 GEOSCIENCES↗

DOE OSTI2020

Kinetics of the functionalization of mesoporous silica nanoparticles: Implications on surface group distributions, adsorption and catalysis

The post-synthesis functionalization (grafting) kinetics of mesoporous silica nanoparticles (MSN) with organotrimethoxysilanes (R-TMS) is studied via solution 1 H NMR spectroscopy. The process involves a rapid adsorption/ desorption pre-equilibrium followed by reaction of R-TMS with surface silanols. Grafting rates are affected by the functional group in R-TMS. For example, the grafting rate of aminopropyl-trimethoxysilane (AP-TMS) is one order of magnitude higher than other R-TMS. High concentrations of AP-TMS result in substrate-inhibition kinetics, likely due to steric and mobility constraints for reactant alignment at high coverage. The higher rates of AP-TMS grafting indicate a catalytic effect of amine groups. This effect depends on the amine’s basicity and can be used to control the grafting rates and degree of condensation of other R-TMS. Adjusting the rate of mercaptopropyl-trimethoxysilane (MP-TMS) grafting using amines gives MP-MSN materials of varying adsorptive and catalytic activities, illustrated by Pd scavenging experiments and use of Pd@MP-MSN as catalysts for a Suzuki-Miyaura cross-coupling reaction.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Real-time observation of the exchange process between H 2 O and NO in the metal–organic framework Ni-MOF-74

Molecular exchange is a common step occurring in many technological processes such as competitive adsorption, chemical separation, capture, delivery, and release. However, the underlying principle is not fully understood, especially in nanoconfined environments where the energetics and kinetics of such processes can deviate from that on flat surfaces. In this study, we unravel the mechanism of a molecular exchange process by studying the displacement of NO by H 2 O in Ni-MOF-74 in real-time using in situ infrared spectroscopy combined with ab initio calculations. We show that weakly bound H 2 O gradually displaces strongly bound NO on the metal sites by first weakening the M–N bond through forming H-bond and then moving the NO away so that it eventually desorbs. Interestingly, we further find that additional water facilitates this exchange by significantly lowering the kinetic barrier associated with this process as well as the overall energy of the final state. Although our study focuses on Ni-MOF-74, we believe that our finding and explanation of unexpected exchange phenomena—where strongly adsorbed molecules are apparently easily displaced by much weaker bound H 2 O—is applicable to a much larger group of frameworks and will be helpful in designing and improving MOFs for real-world applications where humidity is often present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Novel Application of Hybrid Anion Exchange Resin for Phosphate Desorption Kinetics in Soils: Minimizing Re-Adsorption of Desorbed Ions

The process of phosphate desorption from soils is difficult to measure using stirred batch techniques because of the accumulation of desorbed ions in a bathing solution. To accurately measure the apparent rate coefficient of phosphate desorption from soils, it is necessary to remove the desorbed ions. In this study, a novel hybrid (i.e., iron oxide coated) anion exchange resin was used as a sink to study long-term (seven days) P desorption kinetics in intensively managed agricultural soils in the Midwestern U.S. (total phosphorus (TP): 196–419 mg/kg). The phosphate desorption kinetics in the hybrid anion exchange resin method were compared with those in the other conventional batch desorption method with pure anion exchange resins or without any sink. The extent of P desorption in the hybrid resin methods was >50% of total desorbed phosphate in the other methods. The initial kinetic rate estimated in the pseudo-second-order kinetic model was also highest (3.03–31.35 mg/(g·hr)) in the hybrid resin method when the same soil system was compared. This is because adsorbed P in the hybrid resins was nearly irreversible. The hybrid anion exchange resin might be a new and ideal sink in measuring the P desorption process in soils and sediments

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Analyses of hot/warm CO2 removal processes for IGCC power plants

Abstract Compared with a pulverized coal power plant, the integrated gasification combined cycle (IGCC) has several advantages, including, among others better environmental performance and low CO 2 capture cost. Hot/warm CO 2 removal from syngas has also been a subject of research due to its potentially higher thermal efficiency. In this study, we proposed a generic adsorption based hot/warm CO 2 removal process for IGCC power plants. Through analyses of the proposed generic process we have demonstrated that higher temperature of the hot/warm CO 2 removal process will results in larger heat of adsorption, which in turns may increase energy consumption of the process. Under most of the operating temperature range, hot/warm CO 2 removal process will lead to more electricity loss compared to the baseline Selexol process. However, if the adsorption step takes place at a temperature close to or higher than the highest steam temperature in steam cycle, our analysis indicates that the process may lead to minimal electricity loss. The study also provided some other insights into the pathways for hot/warm CO 2 removal process to improve its energy performance through process and sorbent designs. Graphical Abstract

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Energetics of CO 2 and H 2 O adsorption on alkaline earth metal doped TiO 2

The process of CO 2 and H 2 O adsorption on the surface of nano-oxide semiconductors is important in the overall performance of artificial photosynthesis and other applications. In this study, we explored the thermodynamics of CO 2 and H 2 O adsorption on TiO 2 as a function of surface chemistry. We applied gas adsorption calorimetry to investigate the energetics of adsorption of those molecules on the surface of anatase nanoparticles. In an attempt to increase TiO 2 surface affinity to CO 2 and H 2 O, TiO 2 was doped with alkaline earth metals (MgO, CaO, SrO, and BaO) by manipulating the chemical synthesis. Adsorption studies using diffuse reflectance infrared spectroscopy at different temperatures indicate that due to the segregation of alkaline earth metals on the surface of TiO 2 nanoparticles, both CO 2 and subsequent H2O adsorption amounts could be increased. CO 2 adsorbs in two different manners, forming carbonates which can be removed at temperatures lower than 700 °C, and a more stable linear adsorption that remains even at 700 °C. Additionally to the surface energetic effects, doping also increased specific surface area, resulting in further improvement in net gas adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗