Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “acoustic phenomena”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Experimentation Toward the Analysis of Gear Noise Sources Controlled by Sliding Friction and Surface Roughness

In helicopters and other rotorcraft, the gearbox is a major source of noise and vibration (N&V). The two N&V excitation mechanisms are the relative displacements between mating gears (transmission errors) and the friction associated with sliding between gear teeth. Historically, transmission errors have been minimized via improved manufacturing accuracies and tooth modifications. Yet, at high torque loads, noise levels are still relatively high though transmission errors might be somewhat minimal. This suggests that sliding friction is indeed a dominant noise source for high power density rotorcraft gearboxes. In reality, friction source mechanism is associated with surface roughness, lubrication regime properties, time-varying friction forces/torques and gear-mesh interface dynamics. Currently, the nature of these mechanisms is not well understood, while there is a definite need for analytical tools that incorporate sliding resistance and surface roughness, and predict their effects on the vibro- acoustic behavior of gears. Toward this end, an experiment was conducted to collect sound and vibration data on the NASA Glenn Gear-Noise Rig. Three iterations of the experiment were accomplished: Iteration 1 tested a baseline set of gears to establish a benchmark. Iteration 2 used a gear-set with low surface asperities to reduce the sliding friction excitation. Iteration 3 incorporated low viscosity oil with the baseline set of gears to examine the effect of lubrication. The results from this experiment will contribute to a two year project in collaboration with the Ohio State University to develop the necessary mathematical and computer models for analyzing geared systems and explain key physical phenomena seen in experiments. Given the importance of sliding friction in the gear dynamic and vibro-acoustic behavior of rotorcraft gearboxes, there is considerable potential for research & developmental activities. Better models and understanding will lead to quiet and reliable gear designs, as well as the selection of optimal manufacturing processes.

Asnani, Vivake M.↗
NASA NTRS1996

Ground Based Studies of Thermocapillary Flows in Levitated Drops

Ground-based experiments together with analytical studies are presently being conducted for levitated drops. Both acoustic and electrostatic techniques are being employed to achieve levitation of drops in a gaseous environment. The scientific effort is principally on the thermal and the fluid phenomena associated with the local heating of levitated drops, both at 1-g and at low-g. In particular, the thermocapillary flow associated with local spot heating is being studied. Fairly stable acoustic levitation of drops has been achieved with some exceptions when random rotational motion of the drop persists. The flow visualization has been carried out by light scattering from smoke particles for the exterior flow and fluorescent tracer particles in the drop. The results indicate a lack of axial symmetry in the internal flow even though the apparatus and the heating are symmetric. The theoretical studies for the past year have included fundamental analyses of acoustically levitated spherical drops. The flow associated with a particle near the velocity antinode is being investigated by the singular perturbation technique. As a first step towards understanding the effect of the particle displacement from the antinode, the flow field about the node has been calculated for the first time. The effect of the acoustic field on the interior of a liquid drop has also been investigated. The results predict that the internal flow field is very weak.

Sadhal, Satwindar Singh↗
NASA NTRS1977

Inlet turbulence and fan noise measured in an anechoic wind tunnel and statically with an inlet flow control device

Turbulence and acoustic measurements were taken in the NASA-Lewis anechoic wind tunnel - a facility which has demonstrated the blade passage tone cutoff phenomena with forward velocity. Turbulence data were taken in a subsonic inlet at various fan speeds under static and forward velocity conditions. A honeycomb/screen flow control device was placed over the inlet during static tests to modify the inflow in an attempt to simulate flight conditions. Acoustic levels of the blade passage tone along with transverse turbulence intensities were reduced with forward velocity. The flow control device reduced the blade passage tone to an intermediate level between those levels associated with static and forward velocity operation.

Shaw, L. M.↗
DOE OSTI2021

The theoretical study on intermittency and propagation of geodesic acoustic mode in L-mode discharge near tokamak edge

Abstract Through a systematically developed theory, we demonstrate that the motion of Instanton identified in Zhang et al (2017 Phys. Plasmas 24 122304) is highly correlated to the intermittent excitation and propagation of geodesic acoustic mode (GAM) that is observed in tokamaks. While many numerical simulations have observed the phenomena, it is the first theory that reveals the physical mechanism behind GAM intermittent excitation and propagation. The preceding work is based on the micro-turbulence associated with toroidal ion temperature gradient mode, and slab-based phenomenological model of zonal flow. When full toroidal effect is introduced into the system, two branches of zonal flow emerge: the torus-modified low frequency zonal flow (TLFZF), and GAM, necessitating a unified exploration of GAM and TLFZF. Indeed, we observe that the transition from the Caviton to Instanton is triggered by a rapid zero-crossing of radial group velocity of drift wave and is found to be strongly correlated with the GAM onset. Many features peculiar to intermittent GAMs, observed in real machines, are thus identified in the numerical experiment. The results will be displayed in figures and in a movie; first for single central rational surface, and then with coupled multiple central rational surfaces. The periodic bursting first shown disappears as being replaced by irregular one, more similar to the intermittent characteristics observed in GAM experiments.

Physics↗
NASA NTRS1988

Comprehensive rotorcraft analysis methods

The development and application of comprehensive rotorcraft analysis methods in the field of rotorcraft technology are described. These large scale analyses and the resulting computer programs are intended to treat the complex aeromechanical phenomena that describe the behavior of rotorcraft. They may be used to predict rotor aerodynamics, acoustic, performance, stability and control, handling qualities, loads and vibrations, structures, dynamics, and aeroelastic stability characteristics for a variety of applications including research, preliminary and detail design, and evaluation and treatment of field problems. The principal comprehensive methods developed or under development in recent years and generally available to the rotorcraft community because of US Army Aviation Research and Technology Activity (ARTA) sponsorship of all or part of the software systems are the Rotorcraft Flight Simulation (C81), Dynamic System Coupler (DYSCO), Coupled Rotor/Airframe Vibration Analysis Program (SIMVIB), Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD), General Rotorcraft Aeromechanical Stability Program (GRASP), and Second Generation Comprehensive Helicopter Analysis System (2GCHAS).

Stephens, Wendell B.↗
NASA NTRS1993

Development of a droplet breakup model considering aerodynamic and droplet collision effects

A model is currently under development to predict the occurrence and outcome of spray droplet breakup induced by aerodynamic forces and droplet collisions. It is speculated that these phenomena may be significant in determining the droplet size distribution in a spray subjected to acoustic velocity fluctuations. The goal is to integrate this breakup model into a larger spray model in order to examine the effects of combustion instabilities on liquid rocket motor fuel sprays. The model is composed of three fundamental components: a dynamic equation governing the deformation of the droplet, a criterion for breakage based on the amount of deformation energy stored in the droplet and an energy balance based equation to predict the Sauter mean diameter of the fragments resulting from breakup. Comparison with published data for aerodynamic breakup indicates good agreement in terms of predicting the occurrence of breakup. However, the model significantly over predicts the size of the resulting fragments. This portion of the model is still under development.

Wert, K. L.↗
NASA NTRS2007

1st Order Modeling of a SAW Delay Line using MathCAD(Registered)

To aid in the development of SAW sensors for Integrated Vehicle Health Monitoring applications, a first order model of a SAW Delay line has been created using MathCadA. The model implements the Impulse Response method to calculate the frequency response, impedance, and insertion loss. This paper presents the model and the results from the model for a SAW delay line design. Integrated Vehicle Health Monitoring (IVHM) of aerospace vehicles requires rugged sensors having reduced volume, mass, and power that can be used to measure a variety of phenomena. Wireless systems are preferred when retro-fitting sensors onto existing vehicles [1]. Surface Acoustic Wave (SAW) devices are capable of sensing: temperature, pressure, strain, chemical species, mass loading, acceleration, and shear stress. SAW technology is low cost, rugged, lightweight, and extremely low power. Passive wireless sensors have been developed using SAW technology. For these reasons new SAW sensors are being investigated for aerospace applications.

Wilson, William C.↗
DOE OSTI2021

Infrasound From a Buried Chemical Explosion Recorded on a Balloon in the Lower Stratosphere

Abstract Infrasound waveforms generated by natural and anthropogenic phenomena contain important clues about the size and nature of the event. We show that sensors on balloons in the lower stratosphere can record faithful representations of the near‐source acoustic wave field at unprecedented range. The acoustic signature of a buried chemical explosion recorded at a range of 56 km and an altitude of 21.8 km was nearly identical to that recorded on the ground 0.5 km from the epicenter, but absent on a ground sensor located 46 km away. Our results demonstrate that balloon‐borne infrasound techniques greatly increase the range at which well‐preserved acoustic representations of near‐source physics can be acquired, and that their propagation is simple to model. Our work has implications for monitoring remote regions of the earth for explosions, volcanic eruptions, and other phenomena. It also supports the prospect of balloon‐based infrasound seismology on Venus.

Bowman, Daniel C.↗
NASA NTRS1982

Large amplitude drop shape oscillations

An experimental study of large amplitude drop shape oscillation was conducted in immiscible liquids systems and with levitated free liquid drops in air. In liquid-liquid systems the results indicate the existence of familiar characteristics of nonlinear phenomena. The resonance frequency of the fundamental quadrupole mode of stationary, low viscosity Silicone oil drops acoustically levitated in water falls to noticeably low values as the amplitude of oscillation is increased. A typical, experimentally determined relative frequency decrease of a 0.5 cubic centimeters drop would be about 10% when the maximum deformed shape is characterized by a major to minor axial ratio of 1.9. On the other hand, no change in the fundamental mode frequency could be detected for 1 mm drops levitated in air. The experimental data for the decay constant of the quadrupole mode of drops immersed in a liquid host indicate a slight increase for larger oscillation amplitudes. A qualitative investigation of the internal fluid flows for such drops revealed the existence of steady internal circulation within drops oscillating in the fundamental and higher modes. The flow field configuration in the outer host liquid is also significantly altered when the drop oscillation amplitude becomes large.

Trinh, E. H.↗
NASA NTRS1985

Nineteenth International Cosmic Ray Conference. HE Sessions, Volume 8

Papers submitted for presentation at the 19th International Cosmic Ray Conference are compiled. The present volume contains papers addressing high energy interactions and related phenomena. Specific topic areas include muons, neutrinos, magnetic monopoles, nucleon decay, searches for new particles, and acoustic and thermoluminescence detection techniques.

Jones, F. C.↗
NASA NTRS2005

Flow Measurements and Multiple Pure Tone Noise From a Forward Swept Fan

A forward-swept fan, designated the Quiet High Speed Fan (QHSF), was tested in the NASA Glenn 9- by 15-foot Low Speed Wind Tunnel to investigate its noise reduction relative to a baseline fan of the same aerodynamic performance. The objective of the Quiet High Speed Fan was a 6-dB reduction in the Effective Perceived Noise Level relative to the baseline fan at the takeoff condition. The intent of the Quiet High Speed Fan design was to provide both a multiple pure tone noise reduction from the forward sweep of the fan rotor and a rotor-stator interaction blade passing tone noise reduction from a leaned stator. The tunnel noise data indicted that the Quiet High Speed Fan was quieter than the baseline fan for a significant portion of the operating line and was 6 dB quieter near the takeoff condition. Although reductions in the multiple pure tones were observed, the vast majority of the EPNdB reduction was a result of the reduction in the blade passing tone and its harmonics. Laser Doppler Velocimetry (LDV) and shroud unsteady pressure measurement data were obtained upstream of the QHSF and baseline rotors to improve the understanding of the shocks which propagate upstream of the two fans when they are operated at high speeds. The flow phenomena that produce multiple pure tone noise is discussed and compared to measurements of the fan acoustic inlet modes and the far field noise signature of the fan.

Weir, Donald S.↗
NASA NTRS2003

Determining Direction of Arrival at a Y-Shaped Antenna Array

An algorithm computes the direction of arrival (both azimuth and elevation angles) of a lightning-induced electromagnetic signal from differences among the times of arrival of the signal at four antennas in a Y-shaped array on the ground. In the original intended application of the algorithm, the baselines of the array are about 90 m long and the array is part of a lightning-detection-and-ranging (LDAR) system. The algorithm and its underlying equations can also be used to compute directions of arrival of impulsive phenomena other than lightning on arrays of sensors other than radio antennas: for example, of an acoustic pulse arriving at an array of microphones.

Starr, Stan↗
NASA NTRS1986

Response of symmetric rectangular composite laminates with nonlinear damping subjected to acoustic loading

Effects of both nonlinear damping and large-deflection are included in the analysis in an attempt to explain the experimental phenomena of aircraft panels excited at high sound pressure levels; that is the broadening and flattening out of the strain response peaks and the increasing of the response frequency. A nonlinear damping model is considered in the analysis using a single-mode approach. Root-mean-square (RMS) maximum deflection, RMS strains, spectral density functions of strain, and equivalent linear frequency are obtained for clamped and simply supported rectangular symmetric laminated composite plates. It is demonstrated that nonlinear damping is the one which causes the broadening of the response peaks, and it has great influence on RMS panel deflection, RMS strains, and frequency.

Mei, C.↗
NASA NTRS1997

Boundary Layer Receptivity to Three-Dimensional Freestream Disturbances at Two-Dimensional Roughness

The receptivity of a laminar boundary layer to an isolated three-dimensional convected disturbance is investigated in a low-speed wind tunnel experiment. The disturbance is created by the short-duration pulsed displacement of a small low-aspect-ratio wing located upstream of a flat plate. The height of the wing is set so that the convected disturbance grazes the edge of the flat-plate boundary layer. A receptivity site is provided by a two-dimensional roughness strip on the surface of the plate. The different propagation speeds of acoustic, convected and instability waves cause the various wave packets from the pulsed displacement to arrive at a downstream measurement station at different times, separating the phenomena and allowing them to be studied independently. Ensemble- averaged measurements are made with and without roughness on the plate. Preliminary analysis of the measurements suggest the presence of a two-dimensional T-S wave packet arising from an interaction between an acoustic wave and the roughness, and a three-dimensional T-S wave packet arising from an interaction between the localized convected disturbance and the roughness strip. The growth rates and spatial characteristics of the disturbances and the instability wave packets are measured as they propagate downstream.

Dietz, Anthony↗
NASA NTRS1986

Effects of nonlinear damping on random response of beams to acoustic loading

Effects of both nonlinear damping and large-deflection are included in the theoretical analysis in an attempt to explain the experimental phenomena of aircraft panels excited at high sound pressure levels; that is the broadening of the strain response peak and the increase of the modal frequency. Two nonlinear damping models are considered in the analysis using a single-mode approach. Mean square maximum deflection, mean square maximum strain, and spectral density function of maximum strain for simply supported and clamped beams are obtained. It is demonstrated that nonlinear damping contributes significantly to the broadening of the response peak and to the mean square maximum deflection and strain.

Mei, C.↗
NASA NTRS1971

Theory of the unmagnetized plasma.

The Vlasov mathematical model of a plasma, which has come to be thought more useful than any other in describing the dynamical behavior of the majority of plasmas of interest, is first examined. Macroscopic variables and moment equations; linear electrostatics solutions; plasma oscillations, ion acoustic waves, and linear instabilities are treated, as well as external fields, 'test' charges, and nonlinear Vlasov phenomena. Plasmas are statistically described, and attention is given to the kinetic theory of the stable, uniform plasma and the Balescu-Lenard equation; two-time ensemble averages and fluctuation spectra in stable plasmas; the kinetic theory of the unstable plasma; and ensembles of Vlasov plasmas. Some illustrative experiments are described. Four appendixes deal with the electrostatic approximation and transverse waves; solution of the linearized Vlasov equation in a magnetic field; estimates of correlation functions from thermal equilibrium; and equivalence of spatially uniform BBGKY and Klimontovich correlations.

Montgomery, D. C.↗
NASA NTRS1984

Global excitation of wave phenomena in a dissipative multiconstituent medium. I - Transfer function of the earth's thermosphere. II - Impulsive perturbations in the earth's thermosphere

A transfer function approach is taken in constructing a spectral model of the acoustic-gravity wave response in a multiconstituent thermosphere. The model is then applied to describing the thermospheric response to various sources around the globe. Zonal spherical harmonics serve to model the horizontal variations in propagating waves which, when integrated with respect to height, generate a transfer function for a vertical source distribution in the thermosphere. Four wave components are characterized as resonance phenomena and are associated with magnetic activity and ionospheric disturbances. The waves are either trapped or propagate, the latter becoming significant when possessing frequencies above 3 cycles/day. The energy input is distributed by thermospheric winds. The disturbances decay slowly, mainly due to heat conduction and diffusion. Gravity waves appear abruptly and are connected to a sudden switching on or off of a source. Turn off of a source coincides with a reversal of the local atmospheric circulation.

Mayr, H. G.↗
NASA NTRS1975

Seismic and acoustic emissions of a booming dune

Acoustic and seismic spectra of booming sand dunes that emit low-frequency musical resonances when the dunes slump or undergo forced shearing are analyzed and described. Previous studies of booming, squeaking, screeching, and roaring sands with pure outputs resembling those of musical instruments, or more turbulent acoustic outputs such as the sound of low-flying propeller aircraft, are reviewed. The possibility of similar phenomena on the moon (thermal moonquakes) or nearby planets (Mars, Venus) is considered on the basis of planetary topography, soil mechanics, and atmosphere.

Criswell, D. R.↗