Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZINC OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Amorphous indium-tin-zinc oxide films deposited by magnetron sputtering with various reactive gases: Spatial distribution of thin film transistor performance

This work presents the spatial distribution of electrical characteristics of amorphous indium-tin-zinc oxide film (a-ITZO), and how they depend on the magnetron sputtering conditions using O{sub 2}, H{sub 2}O, and N{sub 2}O as the reactive gases. Experimental results show that the electrical properties of the N{sub 2}O incorporated a-ITZO film has a weak dependence on the deposition location, which cannot be explained by the bombardment effect of high energy particles, and may be attributed to the difference in the spatial distribution of both the amount and the activity of the reactive gas reaching the substrate surface. The measurement for the performance of a-ITZO thin film transistor (TFT) also suggests that the electrical performance and device uniformity of a-ITZO TFTs can be improved significantly by the N{sub 2}O introduction into the deposition process, where the field mobility reach to 30.8 cm{sup 2} V{sup –1} s{sup –1}, which is approximately two times higher than that of the amorphous indium-gallium-zinc oxide TFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zinc Oxide–Graphene Nanocomposite-Based Sensor for the Electrochemical Determination of Cetirizine

A nanocomposite electrode of graphene (Gr) and zinc oxide (ZnO) nanoparticles was fabricated to study the electrochemical oxidation behavior of an anti-inflammatory drug, i.e., cetirizine (CET). The voltametric response of CET for bare CPE, Gr/CPE, ZnO/CPE, and the ZnO-Gr nanocomposite electrode was studied. The modifier materials were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray powder diffraction (XRD) to comprehend the surface morphology of the utilized modifiers. The influence of pH, scan rate, and accumulation time on the electrooxidation of CET was examined. It was found that the electrochemical oxidation of CET was diffusion-controlled, in which two protons and two electrons participated. The detection limit was found to be 2.8 × 10 -8 M in a linearity range of 0.05–4.0 µM. Study of excipients was also performed, and it was found that they had negligible interference with the peak potential of CET. The validation and utility of the fabricated nanocomposite sensor material were examined by analyzing clinical and biological samples. Stability testing of the nanocomposite electrode was conducted to assess the reproducibility, determining that the developed biosensor has good stability and high efficiency in producing reproducible results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zinc Oxide Thin Films Fabricated with Direct Current Magnetron Sputtering Deposition Technique

Zinc oxide (ZnO) is a very promising material for emerging large area electronic applications including thin-film sensors, transistors and solar cells. We fabricated ZnO thin films by employing direct current (DC) magnetron sputtering deposition technique. ZnO films with different thicknesses ranging from 100 nm to 1020 nm were deposited on silicon (Si) substrate. The deposition pressure was varied from 12 mTorr to 25 mTorr. The influences of the film thickness and the deposition pressure on structural properties of the ZnO films were investigated using Mahr surface profilometer and atomic force microscopy (AFM). The experimental results reveal that the film thickness and the deposition pressure play significant role in the structural formation of the deposited ZnO thin films. ZnO films deposited on Si substrates are promising for variety of thin-film sensor applications.

36 MATERIALS SCIENCE↗

Supplementing zinc oxide nanoparticles to cryopreservation medium minimizes the freeze-thaw-induced damage to spermatozoa

The sperm DNA integrity post cryopreservation of human semen samples is one of the serious concerns in human infertility treatment. In the present study, the beneficial effects of zinc oxide nanoparticles in preserving the functional ability of spermatozoa was explored. Ejaculates of normozoospermic men cryopreserved along with Zinc oxide nanoparticles (ZnONPs) exhibited non-significantly higher percentage of total and progressive motility in frozen-thawed samples compared to control. The sperm chromatin damage and malondialdehyde (MDA) level was significantly lower in ZnONPs group (P P < 0.05 respectively) and the spermatozoa's ability to undergo acrosome reaction was also unaltered. Fluorescence microscopy and High resolution transmission electron microscopy analysis demonstrated that the ZnONPs do not penetrate the membrane of spermatozoa but stay around the spermatozoa. In conclusion, the presence of ZnONPs during cryopreservation appears to be beneficial to the spermatozoa as they withstand freeze-thaw process competently better than control, without any adverse effect shown.

60 APPLIED LIFE SCIENCES↗

Sealed silver oxide zinc cells for orbiting and planetary missions.

Several test programs were carried out to determine the performance and limitations of sealed, silver oxide zinc cells for (1) 24-hr synchronous orbits, (2) orbits that would require a maximum of six cycles per day, and (3) missions to other planets requiring maintenance of maximum capacity for probe operations during planet encounter. The results are summarized to provide power system designers with guidelines bearing on capacity maintenance during cycling, cycle life, charged stand effects, and internal pressure characteristics. The life of zinc silver oxide cells is shown to be limited to one to two years over the temperature range of 0 to 24 C.

Hennigan, T. J.↗

Surface nanostructuring by ion-induced localized plasma expansion in zinc oxide

Creation of hillock-like nanostructures on the surface of zinc oxide single crystals by irradiation with slow highly charged ions is reported. At constant kinetic energy, the nanostructures were only observed after irradiation with ions of potential energies above a threshold between 19.1 keV and 23.3 keV. The size of the nanostructures increases as a function of potential energy. A plasma expansion approach is used to explain the nanostructures creation. The calculations showed that the surface nanostructures became taller with the increase of ionic temperature. The influence of charged cluster formation and the relevance of their polarity are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Green-Emitting Translucent Zinc Oxide Ceramics Prepared Via Spark Plasma Sintering

Translucent, green-emitting zinc oxide (ZnO) bodies, 19 mm in diameter and 0.72 mm in thickness, have been prepared via spark plasma sintering method. The consolidation of ZnO powders was investigated over the temperature range of 550-1050 C and the pressure range of 55-530 MPa. Samples sintered at temperatures >850 C and pressures of {approx}120 MPa were translucent and had densities of {approx}100%. Samples sintered at 950 C and 130 MPa showed a higher maximum transmittance than the samples sintered at higher or lower temperatures or pressures, with an excellent in-line transmission of 70% in the IR region around 2330 nm. The dense ZnO ceramics exhibited a strong green emission and a weak ultraviolet emission, and the relative intensity of the green emission increased with increasing sintering temperature.

36 MATERIALS SCIENCE↗

Transparent conductive indium zinc oxide films prepared by pulsed plasma deposition

Transparent conductive indium zinc oxide films were prepared by pulsed plasma deposition from a ceramic target (90 wt. % In{sub 2}O{sub 3} and 10 wt. % ZnO). The dependences of film properties upon the substrate temperature was investigated using characterization methods including x-ray diffraction, atomic force microscope, Hall measurement, ultraviolet-visible spectroscopy, and x-ray photoelectron spectroscopy. The films grown at room temperature had a rather smooth surface due to the amorphous structure, with a root mean square roughness of less than 1 nm. The atomic ratio of Zn/(Zn + In) in these films is 15.3 at. %, which is close to that in the target, and the chemical states of indium and zinc atoms were In{sup 3+} and Zn{sup 2+}, respectively. The films deposited on a substrate with a temperature of 200 Degree-Sign C exhibited polycrystalline structure and a preferred growth orientation along the (222) plane. Here the electrical properties were improved due to the better crystallinity, with the films exhibiting a minimum resistivity value of 4.2 Multiplication-Sign 10{sup -4}{Omega} cm, a maximum carrier mobility of 45 cm{sup 2} V{sup -1} s{sup -1}, and an optical transmittance over 80% in the visible region.

36 MATERIALS SCIENCE↗

Deep Subgap Feature in Amorphous Indium Gallium Zinc Oxide. Evidence Against Reduced Indium

Amorphous indium gallium zinc oxide (a-IGZO) is the archetypal transparent amorphous oxide semiconductor. In spite of the gains made with a-IGZO over amorphous silicon in the last decade, the presence of deep subgap states in a-IGZO active layers facilitate instabilities in thin film transistor properties under negative bias illumination stress. Several candidates could contribute to the formation of states within the band gap. We present evidence against In + lone pair active electrons as the origin of the deep subgap features. No In + species are observed, only In0 nano-crystallites under certain oxygen deficient growth conditions. Our results further support under coordinated oxygen as the source of the deep subgap states.

36 MATERIALS SCIENCE↗

A revisit to atomic layer deposition of zinc oxide using diethylzinc and water as precursors

Nanophase zinc oxide (ZnO) has been widely studied as an important multifunctional material in many applications. Atomic layer deposition (ALD) is a unique thin-film synthesis technique, featuring its extreme uniformity, unrivaled conformal coverage, low deposition temperature, and precise controllability. Using diethylzinc (DEZ) and water as precursors, ALD has been reported previously for growing nanophase ZnO thin films. However, the growth characteristics and the resultant ZnO crystallinity have not been well characterized and understood. To this end, we revisited the ALD process of ZnO using DEZ and water. Through employing a suite of advanced characterization techniques, we systematically addressed the growth characteristics, morphological changes, and the crystallinity evolution of ZnO along with growth temperature in the range of 30-250 °C. The growth characteristics of the ALD ZnO films were investigated using in situ quartz crystal microbalance (QCM), scanning electron microscopy, atomic force microscopy, and synchrotron-based X-ray reflectivity. The crystallinity of the ALD ZnO films was determined using synchrotron-based X-ray diffraction and high-resolution transmission electron microscopy. In addition, through further analyzing QCM data, we proposed the adsorption-limited surface reaction for ALD ZnO growth with the temperature-dependent number of -OH surface group reacting with one DEZ molecule. Furthermore, this study contributes to offer new and deep insights on the fundamental ALD process of ZnO.

36 MATERIALS SCIENCE↗

Paramagnetic dysprosium-doped zinc oxide thin films grown by pulsed-laser deposition

Dysprosium(Dy)-doped zinc oxide (Dy:ZnO) thin films were fabricated on c-oriented sapphire substrate by pulsed-laser deposition with doping concentration ranging from 1 to 10 at. %. X-ray diffraction (XRD), Raman-scattering, optical transmission spectroscopy, and spectroscopic ellipsometry revealed incorporation of Dy into ZnO host matrix without secondary phase. Solubility limit of Dy in ZnO under our deposition condition was between 5 and 10 at. % according to XRD and Raman-scattering characteristics. Optical transmission spectroscopy and spectroscopic ellipsometry also showed increase in both transmittance in ultraviolet regime and band gap of Dy:ZnO with increasing Dy density. Zinc vacancies and zinc interstitials were identified by photoluminescence spectroscopy as the defects accompanied with Dy incorporation. Magnetic investigations with a superconducting quantum interference device showed paramagnetism without long-range order for all Dy:ZnO thin films, and a hint of antiferromagnetic alignment of Dy impurities was observed at highest doping concentration—indicating the overall contribution of zinc vacancies and zinc interstitials to magnetic interaction was either neutral or toward antiferromagnetic. From our investigations, Dy:ZnO thin films could be useful for spin alignment and magneto-optical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Ultraviolet Exposure and Humidity on the Photoluminescence Spectra of Zinc Oxide

The structure and electrical and luminescent properties of arrays of zinc-oxide nanorods grown by the hydrothermal method are studied. It was found that the exposure of samples to ultraviolet light or the presence of water vapor in a gaseous atmosphere significantly change the photoluminescence spectra. The exposure of samples leads to a substantial increase in intrinsic photoluminescence and a decrease in impurity photoluminescence. The presence of water vapor leads to the opposite effect. It is shown that the observed effects are caused by the change in the surface-band bending and the thickness of the depletion region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Properties of double-layered Ga-doped Al-zinc-oxide/titanium-doped indium-tin-oxide thin films prepared by dc magnetron sputtering applied for Si-based thin film solar cells

In this article, Ga-doped Al-zinc-oxide (GAZO)/titanium-doped indium-tin-oxide (ITIO) bi-layer films were deposited onto glass substrates by direct current (dc) magnetron sputtering. The bottom ITIO film, with a thickness of 200 nm, was sputtered onto the glass substrate. The ITIO film was post-annealed at 350 deg. C for 10-120 min as a seed layer. The effect of post-annealing conditions on the morphologies, electrical, and optical properties of ITIO films was investigated. A GAZO layer with a thickness of 1200 nm was continuously sputtered onto the ITIO bottom layer. The results show that the properties of the GAZO/ITIO films were strongly dependent on the post-annealed conditions. The spectral haze (T{sub diffuse}/T{sub total}) of the GAZO/ITIO bi-layer films increases upon increasing the post-annealing time. The haze and resistivity of the GAZO/ITIO bi-layer films were improved with the post-annealed process. After optimizing the deposition and annealing parameters, the GAZO/ITIO bi-layer film has an average transmittance of 83.20% at the 400-800 nm wavelengths, a maximum haze of 16%, and the lowest resistivity of 1.04 x 10{sup -3}{Omega} cm. Finally, the GAZO/ITIO bi-layer films, as a front electrode for silicon-based thin film solar cells, obtained a maximum efficiency of 7.10%. These encouraging experimental results have potential applications in GAZO/ITIO bi-layer film deposition by in-line sputtering without the wet-etching process and enable the production of highly efficient, low-cost thin film solar cells.

36 MATERIALS SCIENCE↗

Improved stability of aluminum co-sputtered indium zinc oxide thin-film transistor

Highlights: • We fabricated AOS TFTs using Al co-sputtered IZO thin films as active layers. • Low Al ratio in IZO thin films suppresses carrier concentration and oxygen vacancies. • Addition of 0.62 wt.% Al into IZO could reduce the chance of creating trap states. • Fabricated Al-IZO TFT has improved bias stability under bias stress conditions. • Optical transmittance of Al-IZO film greater than 90% in visible light (400–800 nm). - Abstract: The electrical performance and bias stability of radio-frequency magnetron co-sputtered aluminum-indium-zinc oxide (Al-IZO) thin-film transistors (TFTs) were investigated, with respect to the atomic proportions of Al. Other parameters such as the indium-zinc oxide (IZO) target power, oxygen partial pressure, and initial and process pressures of the chamber were fixed. At a low Al atomic ratio (0.62 wt.%), the electrical performance and bias stability of the Al-IZO TFT were optimized because of the suppression of the generation of oxygen vacancies and the strong bond between Al and oxygen atoms (Al–O; 501.9 kJ/mol). Compared to pure IZO TFTs, the Al-IZO TFT exhibited a small shift in the threshold voltage under bias stress conditions. A higher threshold voltage of −2.24 V and an improved subthreshold swing of 1.35 V/dec were also observed. We demonstrated that the Al-IZO TFT could be a promising candidate for switching and driving operations in mass-produced display applications.

36 MATERIALS SCIENCE↗

Structural, Electrical and Optical Properties of Gallium Doped Zinc Oxide Thin Films Prepared by Electron Beam Evaporation Technique

High quality gallium doped zinc oxide (GZO) films are prepared by electron beam evaporation technique. The effect of substrate temperature on structural, electrical and optical properties was studied in detail. The prepared films are polycrystalline in nature with c-axis perpendicular to the substrate. The resistivity of the film decreases and the optical transparency increases as the substrate temperature increases from room temperature to 150 deg. C. The film produce the optical band gap of 3.47 eV.

36 MATERIALS SCIENCE↗

Synthesis of silica coated zinc oxide–poly(ethylene-co-acrylic acid) matrix and its UV shielding evaluation

Graphical abstract: - Highlights: • Well layer thickness controlled silica shell was made on ZnO nanoparticles. • PEAA, an interfacial agent is used to make nanocomposite–polymer matrix by twin-screw extruder. • Si-ZnO/PEAA matrix is highly stable and UV protective as compared to ZnO/PEAA matrix. • Nanoparticle embedded polymer matrix is suggested to make UV shielding fabrics with Nylon4. - Abstract: Silica coated zinc oxide nanoparticles (Si-ZnO NPs) (7 nm thick) were synthesized successfully and melt blended with poly(ethylene-co-acrylic acid) (PEAA resin) to improving ultraviolet (UV) shielding of zinc oxide nanoparticles (ZnO NPs). The photostability of both the ZnO NPs and Si-ZnO NPs were analyzed by the difference in photoluminescence (PL) and by methylene blue (MB) degradation. Photo-degradation studies confirmed that Si-ZnO NPs are highly photostable compared to ZnO NPs. The melt blended matrices were characterized by field emission scanning electron microscopy interfaced with energy dispersive X-ray spectroscopy (FE-SEM-EDX). The UV shielding property was analyzed from the transmittance spectra of UV–visible (UV–vis) spectroscopy. The results confirmed fine dispersion of thick Si-ZnO NPs in the entire resin matrix. Moreover, the Si-ZnO/PEAA showed about 97% UV shielding properties than the ZnO/PEAA.

36 MATERIALS SCIENCE↗

High-performance amorphous gallium indium zinc oxide thin-film transistors through N{sub 2}O plasma passivation

Amorphous-gallium-indium-zinc-oxide (a-GIZO) thin filmtransistors (TFTs) are fabricated without annealing, using processes and equipment for conventional a-Si:H TFTs. It has been very difficult to obtain sound TFT characteristics, because the a-GIZO active layer becomes conductive after dry etching the Mo source/drain electrode and depositing the a-SiO{sub 2} passivation layer. To prevent such damages, N{sub 2}O plasma is applied to the back surface of the a-GIZO channel layer before a-SiO{sub 2} deposition. N{sub 2}O plasma-treated a-GIZO TFTs exhibit excellent electrical properties: a field effect mobility of 37 cm{sup 2}/V s, a threshold voltage of 0.1 V, a subthreshold swing of 0.25 V/decade, and an I{sub on/off} ratio of 7.

36 MATERIALS SCIENCE↗

Nanoscale Chemical Imaging of Zinc Oxide Nanowire Corrosion

Nanoscale chemical images of individual bare and alumina-coated zinc oxide nanowires (NWs) were recorded using tip-enhanced second harmonic generation (SHG) spectroscopy before and after exposure to carbon dioxide and water vapor. The NWs were exposed for 0, 2, 4 and 6 days, and images were collected for the same bare nanowire after each two-day exposure period. Corrosion of the bare ZnO NW to zinc carbonate was evident from far-field and near-field SHG images and simultaneously recorded AFM data. The expected zinc carbonate corrosion product is SHG inactive. The AFM profile of the NW showed vertical and lateral expansion in different regions of the nanowire. The lower resolution far-field SHG signal decreased gradually and uniformly. The near-field SHG signal provided a profile of the evolving NW under investigation with a spatial resolution of ~100 nm which is in agreement with the AFM results. In contrast, alumina-coated ZnO NWs that were exposed in the same gas environment showed reduced, but still observable, degradation. The 3-nm thick alumina protective layer may have been insufficient to fully protect the NW, or the coating may have been incomplete. Thicker coatings preclude the tip-enhanced method. Nevertheless, the ability to monitor corrosion on a nanometer scale is a powerful tool for a fundamental understanding of surface chemical processes and should lead to the discovery of protective layers to prevent or delay degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗