Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Woody Biomass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Climate and air pollution impacts of generating biopower from forest management residues in California

California faces crisis conditions on its forested landscapes. A century of aggressive logging and fire suppression in combination with conditions exacerbated by climate change have created an ongoing ecological, economic, and public health emergency. Between commercial harvests on California’s working forestlands and the increasing number of acres the state treats each year for fire risk reduction and carbon sequestration, California forests generate millions of tons of woody residues annually—residues that are typically left or burned in the field. State policymakers have turned to biomass electricity generation as a key market for woody biomass in the hope that it can support sustainable forest management activities while also providing low-carbon renewable electricity. However, open questions surrounding the climate and air pollution performance of electricity generation from woody biomass have made it difficult to determine how best to manage the risks and opportunities posed by forest residues. The California Biomass Residue Emissions Characterization (C-BREC) model offers a spatially-explicit life cycle assessment framework to rigorously and transparently establish the climate and air pollution impacts of biopower from forest residues in California under current conditions. The C-BREC model characterizes the variable emissions from different biomass supply chains as well as the counterfactual emissions from prescribed burn, wildfire, and decay avoided by residue mobilization. We find that the life cycle ‘carbon footprint’ of biopower from woody residues generated by recent forest treatments in California ranges widely—from comparable with solar photovoltaic on the low end to comparable with natural gas on the high end. This variation stems largely from the heterogeneity in the fire and decay conditions these residues would encounter if left in the field, with utilization of residue that would otherwise have been burned in place offering the best climate and air quality performance. California’s energy and forest management policies should account for this variation to ensure desired climate benefits are achieved.

54 ENVIRONMENTAL SCIENCES↗

A simplified integrated framework for predicting the economic impacts of feedstock variations in a catalytic fast pyrolysis conversion process

Feedstock attributes of lignocellulosic biomass, such as particle size, compositional makeup, and moisture content, can vary substantially even within pre-processed materials and have a significant effect on conversion in fast pyrolysis-based processes. However, the economic impacts of these attributes are not well understood. To address this, biomass deconstruction phenomena captured with a versatile particle-scale simulation were linked to techno-economic impacts via reduced-order models. Parametric analysis of the particle-scale model, which was validated using literature data, was used in combination with multiple linear regression models to develop correlations between feedstock attributes and yields of pyrolysis oil, gas, and char. Yields were then correlated with the minimum fuel selling price (MFSP) using a techno-economic model, bridging the gap between physics-based biomass conversion simulations and predictions of MFSP for a catalytic fast-pyrolysis process. Empirical correlations derived from the literature regarding the impact of mineral matter (ash) on oil yield were also considered. The model correlations deployed in the integrated framework capture the impacts of variation in feedstock attributes on the MFSP. Variations in ash were shown to have the biggest impact, varying MFSP by -13%/+22% due to catalytic effects and lower relative amounts of convertible lignocellulosic material. It was also found that, if ash can be controlled to low levels, the increased extractives in forest residues can help compensate for some yield losses associated with increased ash. As a result, other inputs considered (particle size, moisture content, and reactor temperature) had relatively negligible effects on process economics within the ranges analyzed considering particle-scale effects alone.

BIOMASS FUELS↗

Component Identification of Solid Biomass Fuels Using Reflected Light Microscopy: Interlaboratory Study 2

As nations transition toward sustainable energy systems, biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

09 BIOMASS FUELS↗

Woody Feedstock 2022 State of Technology Report

The U.S. Department of Energy promotes production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the state of technology (SOT). As part of its involvement in this mission, Idaho National Laboratory completes an annual SOT report for n th -plant and 1 st -plant woody biomass feedstock logistics. The purpose of the SOT is to provide the status of feedstock supply system technology development for woody biomass to biofuels relative to technical targets and cost goals from specific design cases, based on data and experimental results. Conventional feedstock supply systems need to be modified to meet the demands of conversion pathways, specifically to have the ability to adjust the quality of the raw biomass materials. Advanced systems incorporate innovative methods of material handling, preprocessing and supply chain configuration. In advanced designs, variability of the raw biomass can be reduced to produce feedstocks of a uniform format, moving toward biomass commoditization. Against this backdrop, the 2022 Woody SOT for low-ash woody feedstocks utilizes feedstock fractionation by incorporating technologies that can separate the biomass into its anatomical fractions (wood, bark, needle, and extrinsic ash) to reduce impurities and attempt to maximize the retention of usable fractions that satisfy downstream quality considerations. By using a series of air classification steps, this strategy can reduce the extrinsic ash in forest residues, separate out a majority of the incoming needles (which can be supplied to alternate markets), and maximize the retention of whitewood in the usable fraction. The fractionated forest residues are then mixed with clean-pine chips in a 50-50 blend to prepare the feedstock for the desired conversion pathway. The n th -plant analysis estimated the delivered cost for the feedstock at $\$$69.23/dry ton (2016$\$$) which represents a $\$$6.64/dry ton decrease compared to the cost estimate of the 2021 Woody SOT supply system for low-ash woody feedstocks. The quality requirements in the 2022 Woody SOT were identical to those of the 2021 Woody SOT at = 1.00 wt % ash and = 50.51 wt% carbon. The cost savings derive primarily from reductions in dry matter losses during air classification. The GHG emissions for the n th -plant analysis were estimated at 178.39 kg CO2e/dry ton compared to 178.71 kg CO 2 e/dry ton in the 2021 Woody SOT, a decrease of 0.32 kg CO2e/dry ton. The small change stems from an increase in emissions attributed to preprocessing and slightly larger savings in emissions from transportation. In the 1 st -plant analysis of the 2022 Woody SOT system, the average throughput was estimated to be approximately 2,128 dry tons/day or 96.51% of the name plate capacity. During the simulation the daily throughput ranged from 1,090 dry tons/day to 2,200 dry tons/day, or 49.43% to 99.75% of the daily nameplate capacity. After the year of operation 722,403 tons of processed feedstock were produced in total without regard to quality considerations (99.64% of the annual nameplate capacity). The variability in throughput was primarily caused by equipment failures in the system. Regular failures, downtime caused by routine maintenance per manufacturer guidelines, contributed to a majority 62.50% of failures and 62.60% of downtime. Failures due to wear were the other cause of disruption within the system, impacting the rotary shear and orbital screen and accounting for 37.50% of the failures and 37.40% of the total downtime. Ultimately the system was on stream for 87.84% during the simulation period, which is only 2.16 percentage points below the nth-plant assumption for on-stream time. The production cost of the system averaged $\$$71.66/dry ton. The costs ranged from a minimum of $\$$71.23/dry ton to a maximum of $\$$2,115.30/dry ton. When dry matter losses (disposed low-quality fractions as well as other losses such as in grinders) were considered the costs increased to an average of $\$$75.11/dry ton with a minimum of $\$$74.69/dry ton and a maximum of $\$$2,136.86/dry ton...

09 BIOMASS FUELS↗

Biomass pyrolysis devolatilization kinetics of herbaceous and woody feedstocks

Devolatilization kinetics were determined using a modified micropyrolyzer reactor for several biomass feedstocks: switchgrass, corn stover, red oak, and pine. Here, the micropyrolyzer was directly coupled to a flame ionization detector (FID) to track the release of volatiles from the biomass. Time series data from these experiments was analyzed to determine apparent devolatilization rates. Care was taken to assure the experiments were isothermal and kinetically limited calculating a Biot number less than 0.1 and pyrolysis numbers greater than 10, which simplifies the derivation of devolatilization rates. A single, first order reaction was able to model devolatilization rates at temperatures up to 500 °C. No correlation was found between the inorganic content of the biomass and its rate of devolatilization. Apparent activation energies were in the range of 54.9–88.4 kJ mol –1 . The rate coefficient at 500 °C was calculated as 1.90–5.14 s –1 for the four feedstocks.

09 BIOMASS FUELS↗

Bio-Restore Workshop Summary Report

This report summarizes the results of a Bioenergy Technologies Office-sponsored public workshop held at Argonne National Laboratory on September 25–26, 2019. The purpose of the Bio-Restore Workshop was to bring together experts to discuss the current state of the technology and to identify data and R&D relevant to the bio-restore concept. Specific topics included using dedicated energy crops and other biomass sources to provide environmental benefits, implementing algae technologies (e.g., wastewater treatment, direct bloom harvest, turf scrubbers, macroalgae), quantifying and valorizing ecosystem services, developing low-cost sensors and data management systems, and integrating “bio-restore biomass” with supply chain needs. For the purposes of the workshop, the term “bio-restore biomass” refers to terrestrial and algal biomass that provides environmental benefits when produced or harvested. For terrestrial biomass, this primarily includes energy crops (herbaceous and woody), other cellulosic biomass, and waste biomass. For algal biomass, this includes wastewater treatment algal biomass, algal blooms, algal turf scrubbers/attached growth systems, and macroalgae. Types of biomass not of interest to the workshop discussions include oilseed crops, crops generally grown for food or feed, and algae grown in artificial light conditions or other energy-intensive cultivation designs.

09 BIOMASS FUELS↗

Field evaluation of transgenic hybrid poplars with desirable wood properties and enhanced growth for biofuel production by bicistronic expression of PdGA20ox1 and PtrMYB3 in wood-forming tissue

Background: To create an ideotype woody bioenergy crop with desirable growth and biomass properties, we utilized the viral 2A-meidated bicistronic expression strategy to express both PtrMYB3 ( MYB46 ortholog of Populus trichocarpa , a master regulator of secondary wall biosynthesis) and PdGA20ox1 (a GA20-oxidase from Pinus densiflora that produces gibberellins) in wood-forming tissue (i.e., developing xylem). Results: Transgenic Arabidopsis plants expressing the gene construct DX15::PdGA20ox1-2A-PtrMYB3 showed a significant increase in both stem fresh weight (threefold) and secondary wall thickening (1.27-fold) relative to wild-type (WT) plants. Transgenic poplars harboring the same gene construct grown in a greenhouse for 60 days had a stem fresh weight up to 2.6-fold greater than that of WT plants. In a living modified organism (LMO) field test conducted for 3 months of active growing season, the stem height and diameter growth of the transgenic poplars were 1.7- and 1.6-fold higher than those of WT plants, respectively, with minimal adverse growth defects. Although no significant changes in secondary wall thickening of the stem tissue of the transgenic poplars were observed, cellulose content was increased up to 14.4 wt% compared to WT, resulting in improved saccharification efficiency of the transgenic poplars. Moreover, enhanced woody biomass production by the transgenic poplars was further validated by re-planting in the same LMO field for additional two growing seasons. Conclusions: Taken together, these results show considerably enhanced wood formation of our transgenic poplars, with improved wood quality for biofuel production.

09 BIOMASS FUELS↗

Canopy reflectance modeling in a tropical wooded grassland

Geometric/optical canopy reflectance modeling and spatial/spectral pattern recognition are used to study the form and structure of savanna in West Africa. An invertible plant canopy reflectance model is tested for its ability to estimate the amount of woody vegetation cover in areas of sparsely wooded grassland from remotely sensed data. Dry woodlands and wooded grasslands, commonly referred to as savannas, are important ecologically and economically in Africa, and cover approximately forty percent of the continent by some estimates. The Sahelian and Sudanian savanna make up the important and sensitive transition zone between the tropical forests and the arid Saharan region. The depletion of woody cover, used for fodder and fuel in these regions, has become a very severe problem for the people living there. LANDSAT Thematic Mapper (TM) data is used to stratify woodland and wooded grassland into areas of relatively homogeneous canopy cover, and then by applying an invertible forest canopy reflectance model to estimate directly the height and spacing of the trees in the stands. Since height and spacing are proportional to biomass in some cases, a successful application of the segmentation/modeling techniques will allow direct estimation of woody biomass, as well as cover density, over significant areas of these valuable and sensitive ecosystems. Sahelian savanna sites in the Gourma area of Mali being used by the NASA/GIMMS project (Global Inventory Modeling and Monitoring System, at Goddard Space Flight Center), in conjunction with CIPEA/Mali (Centre International pour l'Elevage en Afrique) will be used for testing the canopy model. The model will also be tested in a Sudanian zone crop/woodland area in the Region of Segou, Mali.

Simonett, D.↗

Pilot Plant Reliability Metrics for Grinding and Fast Pyrolysis of Woody Residues

The reliability of biomass size reduction, feeding, and conversion processes remains a critical technical hurdle and important cost driver for biomass conversion systems. While Biorefinery projects have typically focused on scaling up conversion technologies that maximize yield of desired products, e.g. fuels and chemicals, solids handling and reactor feeding systems are often considered secondarily. These are frequently scaled down or adapted from other industries, without a full appreciation of how biomass heterogeneity and variability impact process reliability. Here we present the effects of feedstock variability on relative throughput, mass loss, plant uptime, operator intervention, product yield, and product quality for grinding and fast pyrolysis operations at the pilot scale. Loblolly pine residues were sourced and collected using commercial harvesting techniques. Grinding and pyrolysis experiments were performed at INL's Biomass Feedstock National User Facility and NREL's Thermal and Catalytic Process Development Unit, respectively. Preprocessing throughput using a hammer mill varied between 31-48% of nameplate capacity (5 tons/hr), and fast pyrolysis throughput varied between 57-72% of nameplate capacity (20 kg/hr) for an overall system throughput of 18-35% of nameplate capacity across biomass preprocessing and conversion to pyrolysis oil. Pyrolysis oil yields varied between 46-53% (feedstock carbon to oil, dry basis). Grinder overloads in the size reduction step were more prevalent for lower ash and higher moisture materials. During fast pyrolysis operations, downtime was caused by bridging in the feed and char removal systems and plugging in the condensation system, and significant variation in the type and frequency of operator intervention was observed between feedstocks. Cohesion of solids (feedstock and char) leading to system plugging appeared less problematic for higher ash feedstocks, and differences in condenser plugging behavior between high and low ash feedstocks indicates the composition and physical nature of the deposited material is important for process reliability and is feedstock dependent.

09 BIOMASS FUELS↗

Higher Wood Density Lowers Feedstock Cost and Has Minimal Impact on Biomass Conversion to Biofuels

Poplar and other woody feedstocks have the potential to provide up to 200 million tons of biomass per year that can be converted to liquid fuels. Most forestry strategies that aim to increase biomass productivity per hectare rely on short rotation plantations of fast-growing varieties. The improvement of the wood density as a key trait itself has largely been overlooked. We evaluated natural variation in wood density across a population of genetically diverse Populus trichocarpa trees grown in a common garden. Wood density varies greatly within this population but is heritable; higher wood density was not systematically associated with reduced growth, challenging assumptions of a trade-off between wood density and biomass accumulation. Furthermore, denser wood led to significant improvements throughout the supply chain including lowering biomass production and transportation costs. Higher density did not correlate with changes in biomass composition. Density did not impact bioconversion in the two feedstock-to-fuel pipelines tested (pretreatment by ionic liquids and fermentation to bisabolene or soaking in aqueous ammonia and fermentation to ethanol) on a representative subset of poplars. These findings highlight wood density as a promising breeding target for accelerating the development of high-yielding, conversion-efficient bioenergy crops and as an avenue for increasing landuse efficiency and reducing biomass transportation cost.

09 BIOMASS FUELS↗

Higher_wood_density_lowers_feedstock_cost_and_has_minimal_impact_on_biomass_conversion_to_biofuels

Poplar and other woody feedstocks have the potential to provide up to 200 million tons of biomass per year that could be converted to liquid fuels. Most forestry strategies that aim at increasing biomass productivity per hectare rely on short rotation plantations of fast-growing varieties. The improvement of wood density as a key trait itself has largely been overlooked. We evaluated natural variation in wood density across a population of genetically diversePopulus trichocarpatrees grown in a common garden. Wood density varies greatly within this population but is heritable higher wood density was not systematically associated with reduced growth, challenging assumptions of a trade-off between wood density and biomass accumulation. Furthermore, denser wood led to significant improvements throughout the supply chain, including, lowering biomass production and transportation costs. Higher density not correlate to changes in biomass composition. Density did not impact bioconversion in the two feedstock-to-fuel pipelines tested (pretreatment by ionic liquids or soaking in aqueous ammonia, and fermentation to ethanol) on a representative subset of poplars. These findings highlight wood density as a promising breeding target for accelerating the development of high-yielding, conversion-efficient bioenergy crops and as an avenue for increasing land-use efficiency and reducing biomass transportation cost. This data set contain three datasets.

CBI↗

Regionalized Life Cycle Greenhouse Gas Emissions of Forest Biomass Use for Electricity Generation in the United States

This study presents a cradle-to-grave life cycle analysis (LCA) of the greenhouse gas (GHG) emissions of the electricity generated from forest biomass in different regions of the United States (U.S.), taking into consideration regional variations in biomass availabilities and logistics. The regional biomass supply for a 20 MW bioelectricity facility is estimated using the Land Use and Resource Allocation (LURA) model. Results from LURA and data on regional forest management, harvesting, and processing are incorporated into the GHGs, Regulated Emissions, and Energy Use in Technologies (GREET) model for LCA. The results suggest that GHG emissions of mill residues-based pathways can be 15-52% lower than those of pulpwood-based pathways, with logging residues falling in between. Nonetheless, our analysis suggests that screening bioenergy projects on specific feedstock types alone is not sufficient because GHG emissions of a pulpwood-based pathway in one state can be lower than those of a mill residue-based pathway in another state. Furthermore, the available biomass supply often consists of several woody feedstocks, and its composition is region-dependent. Forest biomass-derived electricity is associated with 86-93% lower life-cycle GHG emissions than the emissions of the average grid electricity in the U.S. Key factors driving bioelectricity GHG emissions include electricity generation efficiency, transportation distance, and energy use for biomass harvesting and processing.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Analysis of forest and forest clearings in Amazonia with Landsat and Shuttle Imaging Radar-A data

Landsat and Shuttle Imaging Radar-A L band (23.5 cm wavelength) data from 1981 were used to analyze areas of intact tropical forest and areas recently cleared from forest for agriculture and pasture in Mato Grosso, Brazil. Portions of SIR-A Data Takes #24C and #31 film were digitized using a microdensitometer. Landsat MSS data of July 1981 were also examined. The digital values from SIR-A DT 31 were compared with the normalized difference vegetation index values (NDVI) from the Landsat data for the same sites. Contrary to expectations some cleared areas had brighter radar responses than surrounding forest. The explanation seems to be that a recently cleared forest (cut and burned during the dry season) is texturally very rough as the exposed standing and fallen boles and woody litter may function as effective corner or dihedral reflectors. Combining radar data with NDVI data may help to assess the relative age of forest clearings and determine differences in both woody and green leaf biomass of primary and secondary tropical forests.

Stone, Thomas A.↗

Hot Water Extraction: Short Rotation Willow, Mixed Hardwoods, and Process Considerations

Short rotation woody crops (SRWC) like shrub willow are highly productive biomass resources of interest for energy and fuel applications. Hot water extraction (HWE) as an upgrading tool to enable the use of willow biomass in pellet applications has been proposed, and is of increasing interest. This study treats willow and mixes of willow and conventional mixed hardwood feedstock with HWE in a tumbling laboratory reactor to elucidate the effects of time, temperature, feedstock mixes, and other process considerations (water:biomass ratio, presteaming, counter-current processing) on mass removals and other extraction outcomes (e.g., sugar, acetate, and furan yields). Results demonstrated alignment of extraction outcomes with P-factor from 155 °C to 175 °C, with a good compromise of removed mass and co-product potential in the range from 575–800 P-factor. The preferred condition was chosen as 575 P-factor. HWE of mixes of willow and hardwood feedstocks showed a linear response of extraction outcomes to willow:hardwood ratios. Testing of water:biomass ratios demonstrated that this is a significant consideration, with each outcome being affected somewhat differently, and indicating that HWE is more diffusion dependent than expected. Presteaming shows little to no effect on extraction outcomes, while multi-stage cooks simulating counter-current operation indicate a significant potential value in counter-current extraction.

09 BIOMASS FUELS↗

Cost of Deconstruction Depots for Diversified, Waste-Based Lignocellulosic Sugars Using Distillable Solvents

Transitioning to a bioeconomy that makes use of low-emission and waste feedstocks requires greater flexibility to accommodate seasonal variations and mitigate long-term storage challenges, such as material loss and fire risk. To achieve this goal, biomass deconstruction technologies must efficiently handle diverse feedstocks. Here, we assess the cost of using butylaminea distillable solventto deconstruct 22 different biomass feedstocks: 7 herbaceous, 9 woody, 4 food processing residues, and 2 blends. Lignocellulosic sugar production costs, based on current empirical data, range from $1.3 to 6.1/kg, suggesting that substantial improvements are required to compete with conventional sugars. The high solvent loading (850 g/kg of whole slurry) is a process bottleneck. Lowering the solvent loading to 59 g/kg of whole slurry, demonstrated in an L-scale reactor using poplar biomass, reduces the minimum sugar selling price by 33%. Solvent loading and recovery, solid loading, sugar yield, enzyme use, and delivered biomass cost all play key roles in reaching sugar production costs of $0.45-0.79/kg. Strategic feedstock blending to maximize carbohydrate content, process optimization to improve conversion efficiency, and the selection of low-cost feedstocks are important to advancing feedstock-flexible biorefineries.

TEA↗