Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISUAL DISPLAY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

WISP information display system user's manual

The wind shears program (WISP) supports the collection of data on magnetic tape for permanent storage or analysis. The document structure provides: (1) the hardware and software configuration required to execute the WISP system and start up procedure from a power down condition; (2) data collection task, calculations performed on the incoming data, and a description of the magnetic tape format; (3) the data display task and examples of displays obtained from execution of the real time simulation program; and (4) the raw data dump task and examples of operator actions required to obtained the desired format. The procedures outlines herein will allow continuous data collection at the expense of real time visual displays.

Alley, P. L.↗
NASA NTRS1983

A rate-controlled teleoperator task with simulated transport delays

A teleoperator-system simulation was used to examine the effects of two control modes (joint-by-joint and resolved-rate), a proximity-display method, and time delays (up to 2 sec) on the control of a five-degree-of-freedom manipulator performing a probe-in-hole alignment task. Four subjects used proportional rotational control and discrete (on-off) translation control with computer-generated visual displays. The proximity display enabled subjects to separate rotational errors from displacement (translation) errors; thus, when the proximity display was used with resolved-rate control, the simulated task was trivial. The time required to perform the simulated task increased linearly with time delay, but time delays had no effect on alignment accuracy. Based on the results of this simulation, several future studies are recommended.

Pennington, J. E.↗
NASA NTRS1984

Pilot differences and motion cuing effects on simulated helicopter hover

The effects that cues of aircraft motion, delays in visual scene, and movement of a ship model have on pilots' ability to hover a simulated helicopter near a destroyer-class ship were examined. Twelve pilots were tested in a within-subject factorial combination of fixed-base, moving-base, and G-seat conditions in which delays of 66 or 128 ms existed in the simulator's visual display and the pilots had to hover near a moving or stationary ship. Best control performance was seen under the moving-base conditions, whereas poorest control was associated with the fixed-base simulation. An intermediate level of performance was produced by the G-seat. In addition, visual delay affected control of the roll axis of the simulation, and interactions between pilots and motion cuing and visual delay were seen. Movement of the ship model had little effect.

Ricard, G. L.↗
NASA NTRS1988

The effect of perspective displays on altitude and stability control in simulated rotary wing flight

The effect of perspective displays on flight performance is investigated using two simulation experiments. In the first, a perspective grid display was superimposed on computer-generated terrain and subjects attempted to maintain their initial attitude in a simulated hover using terrain and/or one of four grid patterns. Horizontal lines produced the best attitude control performance. In the second experiment, a square grid was studied in combination with various visual display configurations and grid attachment conditions. It was found that performance with the panel-mounted display was significantly worse than with the out-the-window or helmet-mounted displays. The results suggested that the partial grid attachment condition improved hovering performance with the panel-mounted display.

O'Donnell, K. A.↗
NASA NTRS1989

Spatial issues in user interface design from a graphic design perspective

The user interface of a computer system is a visual display that provides information about the status of operations on data within the computer and control options to the user that enable adjustments to these operations. From the very beginning of computer technology the user interface was a spatial display, although its spatial features were not necessarily complex or explicitly recognized by the users. All text and nonverbal signs appeared in a virtual space generally thought of as a single flat plane of symbols. Current technology of high performance workstations permits any element of the display to appear as dynamic, multicolor, 3-D signs in a virtual 3-D space. The complexity of appearance and the user's interaction with the display provide significant challenges to the graphic designer of current and future user interfaces. In particular, spatial depiction provides many opportunities for effective communication of objects, structures, processes, navigation, selection, and manipulation. Issues are presented that are relevant to the graphic designer seeking to optimize the user interface's spatial attributes for effective visual communication.

Marcus, Aaron↗
NASA NTRS2005

Using Visualization in Cockpit Decision Support Systems

In order to safely operate their aircraft, pilots must make rapid decisions based on integrating and processing large amounts of heterogeneous information. Visual displays are often the most efficient method of presenting safety-critical data to pilots in real time. However, care must be taken to ensure the pilot is provided with the appropriate amount of information to make effective decisions and not become cognitively overloaded. The results of two usability studies of a prototype airflow hazard visualization cockpit decision support system are summarized. The studies demonstrate that such a system significantly improves the performance of helicopter pilots landing under turbulent conditions. Based on these results, design principles and implications for cockpit decision support systems using visualization are presented.

Aragon, Cecilia R.↗
NASA NTRS2006

Using Dissimilarity Metrics to Identify Interesting Designs

A computer program helps to blend the power of automated-search software, which is able to generate large numbers of design solutions, with the insight of expert designers, who are able to identify preferred designs but do not have time to examine all the solutions. From among the many automated solutions to a given design problem, the program selects a smaller number of solutions that are worthy of scrutiny by the experts in the sense that they are sufficiently dissimilar from each other. The program makes the selection in an interactive process that involves a sequence of data-mining steps interspersed with visual displays of results of these steps to the experts. At crucial points between steps, the experts provide directives to guide the process. The program uses heuristic search techniques to identify nearly optimal design solutions and uses dissimilarity metrics defined by the experts to characterize the degree to which solutions are interestingly different. The search, data-mining, and visualization features of the program were derived from previously developed risk-management software used to support a risk-centric design methodology

Feather, Martin↗
NASA NTRS2024

Multidisciplinary Analytics, Visualization, and Reporting Interface for Integrated Countermeasures

Exploration class missions will have communication latency requiring crew members to make decisions more autonomously, with less support from ground personnel. Therefore, new software is needed to provide crew the ability to not only visualize their countermeasures data, but to also derive comprehensive, nuanced, and multidisciplinary insights regarding the health and performance informatics throughout a mission. The Multidisciplinary Analytics, Visualization, and Reporting Interface for Integrated Countermeasures (MAVRIIC) software seeks to establish a centralized approach to countermeasure data visualization that will facilitate a more holistic understanding of crew members' well-being and performance and enable the development of informed and autonomous decision-making support systems aligned with the evolving requirements of Exploration missions. The culmination of MAVRIIC phase 1 (end of FY23) marked the release of a full-stack, cloud-based ground tool displaying visualizations of in-flight exercise data, exercise ground testing, and exercise MEDB reports. Phase 2 of MAVRIIC (FY24) focuses on beginning the expansion of data contents to domains outside of exercise, including functional fitness, sensorimotor, food/nutrition, radiation, bone, and cardio/vision. Phase 3 and phase 4 will comprise enhanced analytics integration and initiation of flight tool development for infusion into the Artemis Program and eventually the Mars Transit Habitat.

Kent Lawrence Kalogera↗
NASA NTRS2007

Stroboscopic Vision as a Treatment for Retinal Slip Induced Motion Sickness

Motion sickness in the general population is a significant problem driven by the increasingly more sophisticated modes of transportation, visual displays, and virtual reality environments. It is important to investigate non-pharmacological alternatives for the prevention of motion sickness for individuals who cannot tolerate the available anti-motion sickness drugs, or who are precluded from medication because of different operational environments. Based on the initial work of Melvill Jones, in which post hoc results indicated that motion sickness symptoms were prevented during visual reversal testing when stroboscopic vision was used to prevent retinal slip, we have evaluated stroboscopic vision as a method of preventing motion sickness in a number of different environments. Specifically, we have undertaken a five part study that was designed to investigate the effect of stroboscopic vision (either with a strobe light or LCD shutter glasses) on motion sickness while: (1) using visual field reversal, (2) reading while riding in a car (with or without external vision present), (3) making large pitch head movements during parabolic flight, (4) during exposure to rough seas in a small boat, and (5) seated and reading in the cabin area of a UH60 Black Hawk Helicopter during 20 min of provocative flight patterns.

Reschke, M. F.↗
NASA NTRS1989

Telepresence, time delay, and adaptation

Displays are now being used extensively throughout the society. More and more time is spent watching television, movies, computer screens, etc. Furthermore, in an increasing number of cases, the observer interacts with the display and plays the role of operator as well as observer. To a large extent, the normal behavior in the normal environment can also be thought of in these same terms. Taking liberties with Shakespeare, it might be said, all the world's a display and all the individuals in it are operators in and on the display. Within this general context of interactive display systems, a discussion is began with a conceptual overview of a particular class of such systems, namely, teleoperator systems. The notion is considered of telepresence and the factors that limit telepresence, including decorrelation between the: (1) motor output of the teleoperator as sensed directly via the kinesthetic/tactual system, and (2) the motor output of the teleoperator as sensed indirectly via feedback from the slave robot, i.e., via a visual display of the motor actions of the slave robot. Finally, the deleterious effect of time delay (a particular decorrelation) on sensory-motor adaptation (an important phenomenon related to telepresence) is examined.

Held, Richard↗
DOE OSTI2015

Eye-tracking of nodule detection in lung CT volumetric data

Purpose: Signal detection on 3D medical images depends on many factors, such as foveal and peripheral vision, the type of signal, and background complexity, and the speed at which the frames are displayed. In this paper, the authors focus on the speed with which radiologists and naïve observers search through medical images. Prior to the study, the authors asked the radiologists to estimate the speed at which they scrolled through CT sets. They gave a subjective estimate of 5 frames per second (fps). The aim of this paper is to measure and analyze the speed with which humans scroll through image stacks, showing a method to visually display the behavior of observers as the search is made as well as measuring the accuracy of the decisions. This information will be useful in the development of model observers, mathematical algorithms that can be used to evaluate diagnostic imaging systems. Methods: The authors performed a series of 3D 4-alternative forced-choice lung nodule detection tasks on volumetric stacks of chest CT images iteratively reconstructed in lung algorithm. The strategy used by three radiologists and three naïve observers was assessed using an eye-tracker in order to establish where their gaze was fixed during the experiment and to verify that when a decision was made, a correct answer was not due only to chance. In a first set of experiments, the observers were restricted to read the images at three fixed speeds of image scrolling and were allowed to see each alternative once. In the second set of experiments, the subjects were allowed to scroll through the image stacks at will with no time or gaze limits. In both static-speed and free-scrolling conditions, the four image stacks were displayed simultaneously. All trials were shown at two different image contrasts. Results: The authors were able to determine a histogram of scrolling speeds in frames per second. The scrolling speed of the naïve observers and the radiologists at the moment the signal was detected was measured at 25–30 fps. For the task chosen, the performance of the observers was not affected by the contrast or experience of the observer. However, the naïve observers exhibited a different pattern of scrolling than the radiologists, which included a tendency toward higher number of direction changes and number of slices viewed. Conclusions: The authors have determined a distribution of speeds for volumetric detection tasks. The speed at detection was higher than that subjectively estimated by the radiologists before the experiment. The speed information that was measured will be useful in the development of 3D model observers, especially anthropomorphic model observers which try to mimic human behavior.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1988

Reconfigurable work station for a video display unit and keyboard

A reconfigurable workstation is described having video, keyboard, and hand operated motion controller capabilities. The workstation includes main side panels between which a primary work panel is pivotally carried in a manner in which the primary work panel may be adjusted and set in a negatively declined or positively inclined position for proper forearm support when operating hand controllers. A keyboard table supports a keyboard in such a manner that the keyboard is set in a positively inclined position with respect to the negatively declined work panel. Various adjustable devices are provided for adjusting the relative declinations and inclinations of the work panels, tables, and visual display panels.

Shields, Nicholas L.↗
DOE OSTI2019

Exploration and Analysis of Legacy Data at the Hanford Site Using PHOENIX - 19044

Radioactive contaminants pose risks to human health and the environment. These risks are influenced by factors such as disposal/release and transport mechanisms, location in the environment, potential exposure receptors, and the presence of comingled contaminants. Understanding the behavior, transport, and distribution of radionuclides in the environment is essential to facilitating risk-informed decision-making related to remedial design, action, and monitoring. These decisions are based on significant amounts of complex data that must be accessed, integrated, and analyzed to effectively evaluate data and formulate appropriate conclusions and recommendations. Often, data volume, complexity, and legacy access issues pose severe challenges for analysts, regulators, and stakeholders interested in evaluating scientific data to support decision-making. To address these challenges at the U.S. Department of Energy Hanford Site, Pacific Northwest National Laboratory (PNNL) has developed PHOENIX (PNNL-Hanford Online Environmental Information exchange) to facilitate risk-informed decision-making by streamlining investigative and analytical processes through the integration and visualization of previously isolated datasets created under distinct regulatory or operational regimes, each serving a specific purpose. With the large volume of data dispersed across many Hanford environmental databases, finding the correct sources of relevant data, accessing them, and relating them in a meaningful way can prove challenging and time consuming. By analyzing Hanford databases, performing substantial optimization using modern data processing methods and developing extensive queries on the refactored data, PHOENIX enables users to access, integrate, display, visualize, and retrieve data that would have been historically unfeasible to examine. The data and information accessible through PHOENIX help inform remediation-related assessments and evaluations, predict and quantify the risks that radioactive and chemical contaminants pose to human health and the environment, and communicate this information to decision makers responsible for risk-based remediation actions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1974

Multispectral combination and display of ERTS-1 data

Standard NASA color composites combine the most relevant 3 bands from the 4 MSS bands available. An alternate approach is to extract the principal components of the data by a linear transformation of the 4 bands. This approach leads to a low dimensionality representation of ERTS-1 data with the least degradation, in the mean square sense, of the radiometric accuracy. The technique has been applied with success to ERTS-1 MSS data for several geographic areas in California. For all examples considered the mean square representation error is less than one percent. By combining this dimensionality reduction which our previous results on image enhancement for visual display, color composites are obtained which contain and display most of the information provided by the ERTS-1 sensors.

Algazi, V. R.↗
NASA NTRS2005

Reactions of Air Transport Flight Crews to Displays of Weather During Simulated Flight

Display of information in the cockpit has long been a challenge for aircraft designers. Given the limited space in which to present information, designers have had to be extremely selective about the types and amount of flight related information to present to pilots. The general goal of cockpit display design and implementation is to ensure that displays present information that is timely, useful, and helpful. This suggests that displays should facilitate the management of perceived workload, and should allow maximal situation awareness. The formatting of current and projected weather displays represents a unique challenge. As technologies have been developed to increase the variety and capabilities of weather information available to flight crews, factors such as conflicting weather representations and increased decision importance have increased the likelihood for errors. However, if formatted optimally, it is possible that next generation weather displays could allow for clearer indications of weather trends such as developing or decaying weather patterns. Important issues to address include the integration of weather information sources, flight crew trust of displayed weather information, and the teamed reactivity of flight crews to displays of weather. Past studies of weather display reactivity and formatting have not adequately addressed these issues; in part because experimental stimuli have not approximated the complexity of modern weather displays, and in part because they have not used realistic experimental tasks or participants. The goal of the research reported here was to investigate the influence of onboard and NEXRAD agreement, range to the simulated potential weather event, and the pilot flying on flight crew deviation decisions, perceived workload, and perceived situation awareness. Fifteen pilot-copilot teams were required to fly a simulated route while reacting to weather events presented in two graphical formats on a separate visual display. Measures of flight crew reactions included performance-based measures such as deviation decision accuracy, and judgment-based measures such as perceived decision confidence, workload, situation awareness, and display trust. Results demonstrated that pilots adopted a conservative reaction strategy, often choosing to deviate from weather rather than ride through it. When onboard and NEXRAD displays did not agree, flight crews reacted in a complex manner, trusting the onboard system more but using the NEXRAD system to augment their situation awareness. Distance to weather reduced situation awareness and heightened workload levels. Overall, flight crews tended to adopt a participative leadership style marked by open communication. These results suggest that future weather displays should exploit the existing benefits of NEXRAD presentation for situation awareness while retaining the display structure and logic inherent in the onboard system.

Bliss, James P.↗
NASA NTRS1976

Head restraint enhances visual monitoring performance

Subjects monitored a visual display for occasional increments in the horizontal movement of a bar of light. When the display was viewed without head restraint, detection probability was directly related to the amplitude of the increments in movement which constituted critical signals and inversely related to background event rate (the frequency of neutral events in which critical signals were embedded). When positioning of the head was restrained by a headrest, the detectability of low-amplitude signals was enhanced considerably and the influence of background event rate was attenuated. The results are considered as providing further support for the importance of sense mode coupling in visual monitoring.

Warm, J. S.↗
NASA NTRS1991

VERDEX: A virtual environment demonstrator for remote driving applications

One of the key areas of the National Advanced Robotics Centre's enabling technologies research program is that of the human system interface, phase 1 of which started in July 1989 and is currently addressing the potential of virtual environments to permit intuitive and natural interactions between a human operator and a remote robotic vehicle. The aim of the first 12 months of this program (to September, 1990) is to develop a virtual human-interface demonstrator for use later as a test bed for human factors experimentation. This presentation will describe the current state of development of the test bed, and will outline some human factors issues and problems for more general discussion. In brief, the virtual telepresence system for remote driving has been designed to take the following form. The human operator will be provided with a helmet-mounted stereo display assembly, facilities for speech recognition and synthesis (using the Marconi Macrospeak system), and a VPL DataGlove Model 2 unit. The vehicle to be used for the purposes of remote driving is a Cybermotion Navmaster K2A system, which will be equipped with a stereo camera and microphone pair, mounted on a motorized high-speed pan-and-tilt head incorporating a closed-loop laser ranging sensor for camera convergence control (currently under contractual development). It will be possible to relay information to and from the vehicle and sensory system via an umbilical or RF link. The aim is to develop an interactive audio-visual display system capable of presenting combined stereo TV pictures and virtual graphics windows, the latter featuring control representations appropriate for vehicle driving and interaction using a graphical 'hand,' slaved to the flex and tracking sensors of the DataGlove and an additional helmet-mounted Polhemus IsoTrack sensor. Developments planned for the virtual environment test bed include transfer of operator control between remote driving and remote manipulation, dexterous end effector integration, virtual force and tactile sensing (also the focus of a current ARRL contract, initially employing a 14-pneumatic bladder glove attachment), and sensor-driven world modeling for total virtual environment generation and operator-assistance in remote scene interrogation.

Stone, Robert J.↗
NASA NTRS2024

Lunar Terrain Mapping Using 3D Software and Modeling Techniques for the Glenn Research Center Communication Analysis Suite

As NASA prepares to return humans to the Moon as part of upcoming Artemis missions, engineers must examine the surface features and safety of lunar terrain at various locations. The Glenn Research Center Communication Analysis Suite (GCAS) includes visualization tools developed to aid scientists in this quest to comprehend lunar terrain data, as well as spatial communication information. Visual information and understanding will be highly useful to engineers as they use the GCAS to compare the topography of regions of interest for the Artemis III and future space travel missions. Not only can three-dimensional (3D) visualization display the intricacies of the lunar terrain, but it can also demonstrate relationships such as the presence or absence of communication links between Earth ground stations, lunar crew members, and rovers, and the presence of shadows on the lunar surface. In the future, the GCAS has the potential to support the planning of other space exploration missions as well. The emerging possibility of incorporating more planetary bodies becomes especially important as NASA plans not only to return to the Moon but to press onward to Mars.

Visualization↗