Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VEGETABLE OILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

A hybrid approach to advancing quantitative prediction of tissue distribution of basic drugs in human

A general toxicity of basic drugs is related to phospholipidosis in tissues. Therefore, it is essential to predict the tissue distribution of basic drugs to facilitate an initial estimate of that toxicity. The objective of the present study was to further assess the original prediction method that consisted of using the binding to red blood cells measured in vitro for the unbound drug (RBCu) as a surrogate for tissue distribution, by correlating it to unbound tissue:plasma partition coefficients (Kpu) of several tissues, and finally to predict volume of distribution at steady-state (V{sub ss}) in humans under in vivo conditions. This correlation method demonstrated inaccurate predictions of V{sub ss} for particular basic drugs that did not follow the original correlation principle. Therefore, the novelty of this study is to provide clarity on the actual hypotheses to identify i) the impact of pharmacological mode of action on the generic correlation of RBCu-Kpu, ii) additional mechanisms of tissue distribution for the outlier drugs, iii) molecular features and properties that differentiate compounds as outliers in the original correlation analysis in order to facilitate its applicability domain alongside the properties already used so far, and finally iv) to present a novel and refined correlation method that is superior to what has been previously published for the prediction of human V{sub ss} of basic drugs. Applying a refined correlation method after identifying outliers would facilitate the prediction of more accurate distribution parameters as key inputs used in physiologically based pharmacokinetic (PBPK) and phospholipidosis models.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2011

Properties of Amorphous Carbon Microspheres Synthesised by Palm Oil-CVD Method

Amorphous carbon microspheres were synthesized using a dual-furnace chemical vapour deposition method at 800-1000 deg. C. Palm oil-based cooking oil (PO) and zinc nitrate solution was used as a carbon source and catalyst precursor, respectively with PO to zinc nitrate ratio of 30:20 (v/v) and a silicon wafer as the sample target. Regular microsphere shape of the amorphous carbons was obtained and a uniform microsphere structure improved as the carbonization temperature increased from 800 to 1000 deg. C. At 800 deg. C, no regular microspheres were formed but more uniform structure is observed at 900 deg. C. Generally the microspheres size is uniform when the heating temperature was increased to 1000 deg. C, but the presence of mixed sizes can still be observed. X-ray diffraction patterns show the presence of oxide of carbon, ZnO phase together with Zn oxalate phase. Raman spectra show two broad peaks characteristic to amorphous carbon at 1344 and 1582 cm{sup -1} for the D and G bands, respectively. These bands become more prominent as the preparation temperature increased from 800 to 1000 deg. C. This is in agreement with the formation of amorphous carbon microspheres as shown by the FESEM study and other Zn-based phases as a result of the oxidation process of the palm oil as the carbon source and the zinc nitrate as the catalyst precursor, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Using IR spectroscopy to determine biodiesel conversion

This project’s aim was to develop a way to use Infrared (IR) Spectroscopy to determine the extent of the conversion of oil to biodiesel produced during a typical transesterification process. The most reliable method of biodiesel analysis is gas chromatography with flame ionization detector (GC-FID) analysis. This analysis is not ideal for the educational or field applications since it is time intensive and requires expensive, specialized equipment. The use of the FT-IR is faster and more affordable. A calibration curve was created by comparing data on the purity of biodiesel samples obtained from the GC-FID analysis to the ratio of the absorbances at 1197 cm -1 to 1166 cm -1 from the FT-IR spectrum. For field application, a similar method was developed using a portable IR spectrometer, the InfraSpecTM VFA-IR spectrometer. As a result, the data collected gave a good linear fit for % purity of the samples and can be used as a method for monitoring the conversion of different types of oils to biodiesel and determining the purity of biodiesel produced from oil.

09 BIOMASS FUELS↗
DOE OSTI2011

Hepatic transcriptomic responses to TCDD in dioxin-sensitive and dioxin-resistant rats during the onset of toxicity

The dioxin congener 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) causes a wide range of toxic effects in rodent species, all of which are mediated by a ligand-dependent transcription-factor, the aryl hydrocarbon receptor (AHR). The Han/Wistar (Kuopio) (H/W) strain shows exceptional resistance to many TCDD-induced toxicities; the LD{sub 50} of > 9600 {mu}g/kg for H/W rats is higher than for any other wild-type mammal known. We previously showed that this resistance primarily results from H/W rats expressing a variant AHR isoform that has a substantial portion of the AHR transactivation domain deleted. Despite this large deletion, H/W rats are not entirely refractory to the effects of TCDD; the variant AHR in these animals remains fully competent to up-regulate well-known dioxin-inducible genes. TCDD-sensitive (Long-Evans, L-E) and resistant (H/W) rats were treated with either corn-oil (with or without feed-restriction) or 100 {mu}g/kg TCDD for either four or ten days. Hepatic transcriptional profiling was done using microarrays, and was validated by RT-PCR analysis of 41 genes. A core set of genes was altered in both strains at all time points tested, including CYP1A1, CYP1A2, CYP1B1, Nqo1, Aldh3a1, Tiparp, Exoc3, and Inmt. Outside this core, the strains differed significantly in the breadth of response: three-fold more genes were altered in L-E than H/W rats. At ten days almost all expressed genes were dysregulated in L-E rats, likely reflecting emerging toxic responses. Far fewer genes were affected by feed-restriction, suggesting that only a minority of the TCDD-induced changes are secondary to the wasting syndrome.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Formation of carbonaceous nano-layers under high interfacial pressures during lubrication with mineral and bio-based oils

In order to better protect steel surfaces against wear under high loads, understanding of chemical reactions between lubricants and metal at high interfacial pressures and elevated temperatures needs to be improved. Solutions at 5 to 20 wt. % of zinc di-2-ethylhexyl dithio phosphate (ZDDP) and chlorinated paraffins (CP) in inhibited paraffinic mineral oil (IPMO) and inhibited soy bean oil (ISBO) were compared on a Twist Compression Tribotester (TCT) at 200 MPa. Microscopy of wear tracks after 10 seconds tribotesting showed much smoother surface profiles than those of unworn areas. X-ray photoelectron spectroscopy (XPS) coupled with Ar-ion sputtering demonstrated that additive solutions in ISBO formed 2–3 times thicker carbon-containing nano-layers compared to IPMO. The amounts of Cl, S or P were unexpectedly low and detectable only on the top surface with less than 5 nm penetration. CP blends in IPMO formed more inorganic chlorides than those in ISBO. It can be concluded that base oils are primarily responsible for the thickness of carbonaceous nano-layers during early stages of severe boundary lubrication, while CP or ZDDP additive contributions are important, but less significant.

42 ENGINEERING↗
DOE OSTI2012

Anti-inflammatory activity of methyl palmitate and ethyl palmitate in different experimental rat models

Methyl palmitate (MP) and ethyl palmitate (EP) are naturally occurring fatty acid esters reported as inflammatory cell inhibitors. In the current study, the potential anti-inflammatory activity of MP and EP was evaluated in different experimental rat models. Results showed that MP and EP caused reduction of carrageenan-induced rat paw edema in addition to diminishing prostaglandin E2 (PGE2) level in the inflammatory exudates. In lipopolysaccharide (LPS)-induced endotoxemia in rats, MP and EP reduced plasma levels of tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6). MP and EP decreased NF-κB expression in liver and lung tissues and ameliorated histopathological changes caused by LPS. Topical application of MP and EP reduced ear edema induced by croton oil in rats. In the same animal model, MP and EP reduced neutrophil infiltration, as indicated by decreased myeloperoxidase (MPO) activity. In conclusion, this study demonstrates the effectiveness of MP and EP in combating inflammation in several experimental models. -- Highlights: ► Efficacy of MP and EP in combating inflammation was displayed in several models. ► MP and EP reduced carrageenan-induced rat paw edema and prostaglandin E2 level. ► MP and EP decreased TNF-α and IL-6 levels in experimental endotoxemia. ► MP and EP reduced NF-κB expression and histological changes in rat liver and lung. ► MP and EP reduced croton oil-induced ear edema and neutrophil infiltration.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2011

Altered cardiovascular reactivity and osmoregulation during hyperosmotic stress in adult rats developmentally exposed to polybrominated diphenyl ethers (PBDEs)

Polybrominated diphenyl ethers (PBDEs) and the structurally similar chemicals polychlorinated biphenyls (PCBs) disrupt the function of multiple endocrine systems. PCBs and PBDEs disrupt the secretion of vasopressin (VP) from the hypothalamus during osmotic activation. Since the peripheral and central vasopressinergic axes are critical for osmotic and cardiovascular regulation, we examined whether perinatal PBDE exposure could impact these functions during physiological activation. Rats were perinatally dosed with a commercial PBDE mixture, DE-71. Dams were given 0 (corn oil control), 1.7 (low dose) or 30.6 mg/kg/day (high dose) in corn oil from gestational day (GD) 6 through postnatal day (PND) 21 by oral gavage. In the male offspring exposed to high dose PBDE plasma thyroxine and triiodothyronine levels were reduced at PND 21 and recovered to control levels by PND 60 when thyroid stimulating hormone levels were elevated. At 14-18 months of age, cardiovascular responses were measured in four groups of rats: Normal (Oil, normosmotic condition), Hyper (Oil, hyperosmotic stress), Hyper PBDE low (1.7 mg/kg/day DE-71 perinatally, hyperosmotic stress), and Hyper PBDE high (30.6 mg/kg/day DE-71 perinatally, hyperosmotic stress). Systolic blood pressure (BP), diastolic BP, and heart rate (HR) were determined using tail cuff sphygmomanometry and normalized to pretreatment values (baseline) measured under basal conditions. Hyperosmotic treatment yielded significant changes in systolic BP in PBDE exposed rats only. Hyper PBDE low and high dose rats showed 36.1 and 64.7% greater systolic BP responses at 3 h post hyperosmotic injection relative to pretreatment baseline, respectively. No treatment effects were measured for diastolic BP and HR. Hyper and Hyper PBDE rats showed increased mean plasma osmolality values by 45 min after injection relative to normosmotic controls. In contrast to Hyper rats, Hyper PBDE (high) rats showed a further increase in mean plasma osmolality at 3 h (358.3 {+-} 12.4 mOsm/L) relative to 45 min post hyperosmotic injection (325.1 {+-} 11.4 mOsm/L). Impaired osmoregulation in PBDE-treated animals could not be attributed to decreased levels of plasma vasopressin. Our findings suggest that developmental exposure to PBDEs may disrupt cardiovascular reactivity and osmoregulatory responses to physiological activation in late adulthood. - Highlights: > We examined whether PBDE exposure could impact osmotic and cardiovascular regulation. > Hyperosmotic treatment yielded significant changes in systolic BP in PBDE exposed rats only. > PBDEs may disrupt cardiovascular and osmoregulatory responses to physiological activation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Generation of camelina mid-oleic acid seed oil by identification and stacking of fatty acid biosynthetic mutants

Modifying oilseeds to obtain a desired fatty acid composition is often necessary to enable use as feedstocks for specific applications such as food processing, biofuels, or biolubricants. A mutant population of camelina (Camelina sativa), an emerging specialty oilseed crop, was screened by high-throughput gas chromatography for lines with altered seed oil fatty acid composition. By leveraging knowledge of fatty acid synthesis in Arabidopsis thaliana, mutations in orthologs of FATTY ACID ELONGASE1 (FAE1), FATTY ACID DESATURASE2 (FAD2), FATTY ACID DESATURASE3 (FAD3), and β-KETO-ACYL-ACP SYNTHASE II (KASII; FAB1) were identified. The mutations altered conserved amino acid residues in the encoded proteins. The ability of the mutations in FAE1, FAD2 and FAD3 to affect enzyme function was demonstrated by comparing in vivo activities of wild-type and mutant alleles in yeast. In addition, expression of wild-type cDNA in camelina complemented fatty acid phenotypes of these mutants. As camelina has a hexaploid genome, the effect of a mutation in one of the three homeologs for each gene resulted in no or less severe growth phenotypes compared to similar mutations in Arabidopsis. Mid-oleic oils with nearly 40 % oleic acid and reduced very long-chain (≤C20) fatty acid content were obtained by crossing to obtain a fae1c/fad2a/fae1a/fad3a quadruple mutant. Little effect on total seed oil content was observed in the stacked mutant line. Finally, the resulting mid-oleic acid oil had improved oxidative stability due to reductions in polyunsaturated fatty acid content, increasing its utility for biofuels and other applications.

09 BIOMASS FUELS↗
DOE OSTI2019

Influence of Chemical Structure of Petrochemical Polyol on Properties of Bio-polyurethane Foams

In this study, the influence of the chemical structures of petrochemical polyols on the foaming process of polyurethane compositions as well as on selected properties of the foams obtained has been investigated. Two types of petrochemical polyols were used—polyester and polyether polyols as well as their blends with a rapeseed oil-based polyol. Dielectric polarization, temperature and expansion velocity were determined during the foaming process of the polyurethane systems with different polyol components. The results show the highest reactivity of the polyester polyol and a decrease of the polyurethane system’s reactivity as a result of a partial replacement of the petrochemical polyol with the bio-based polyol. The content of the closed cells in the materials obtained strongly depends on the petrochemical polyol used. The results indicate that the chemical structure of the petrochemical polyol had a significant effect on the cellular structure as well as the physical–mechanical properties of the final products. A significant worsening of the foams’ mechanical properties was observed as an effect of a partial replacement of the polyester polyol with the rapeseed oil-based polyol. In contrast, a partial replacement of the polyether polyol caused an improvement of the cell structure keeping the mechanical properties of the modified foams at the same level.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Towards the synthetic design of camelina oil enriched in tailored acetyl-triacylglycerols with medium-chain fatty acids

Here, the ability to manipulate expression of key biosynthetic enzymes has allowed the development of genetically modified plants that synthesise unusual lipids that are useful for biofuel and industrial applications. By taking advantage of the unique activities of enzymes from different species, tailored lipids with a targeted structure can be conceived. In this study we demonstrate the successful implementation of such an approach by metabolically engineering the oilseed crop Camelina sativa to produce 3-acetyl-1,2-diacyl-sn-glycerols (acetyl-TAGs) with medium-chain fatty acids (MCFAs). Different transgenic camelina lines that had been genetically modified to produce MCFAs through the expression of MCFA-specific thioesterases and acyltransferases were retransformed with the Euonymus alatus gene for diacylglycerol acetyltransferase (EaDAcT) that synthesises acetyl-TAGs. Concomitant RNAi suppression of acyl-CoA:diacylglycerol acyltransferase increased the levels of acetyl-TAG, with up to 77 mole percent in the best lines. However, the total oil content was reduced. Analysis of the composition of the acetyl-TAG molecular species using electrospray ionisation mass spectrometry demonstrated the successful synthesis of acetyl-TAG containing MCFAs. Field growth of high-yielding plants generated enough oil for quantification of viscosity. As part of an ongoing design–test–learn cycle, these results, which include not only the synthesis of ‘designer’ lipids but also their functional analysis, will lead to the future production of such molecules tailored for specific applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2015

Flavonoids casticin and chrysosplenol D from Artemisia annua L. inhibit inflammation in vitro and in vivo

Background: The aim of our experiments was to investigate the anti-inflammatory properties of casticin and chrysosplenol D, two flavonoids present in Artemisia annua L. Methods: Topical inflammation was induced in ICR mice using croton oil. Mice were then treated with casticin or chrysosplenol D. Cutaneous histological changes and edema were assessed. ICR mice were intragastrically administrated with casticin or chrysosplenol D followed by intraperitoneal injection of lipopolysaccharide (LPS). Mouse Raw264.7 macrophage cells were incubated with casticin or chrysosplenol D. Intracellular phosphorylation was detected, and migration was assessed by trans-well assay. HT-29/NFκB-luc cells were incubated with casticin or chrysosplenol D in the presence or absence of LPS, and NF-κB activation was quantified. Results: In mice, administration of casticin (0.5, 1 and 1.5 μmol/cm{sup 2}) and chrysosplenol D (1 and 1.5 μmol/cm{sup 2}) inhibited croton oil-induced ear edema (casticin: 29.39–64.95%; chrysosplenol D: 37.76–65.89%, all P < 0.05) in a manner similar to indomethacin (0.5, 1 and 1.5 μmol/cm{sup 2}; 55.63–84.58%). Casticin (0.07, 0.13 and 0.27 mmol/kg) and chrysosplenol D (0.07, 0.14 and 0.28 mmol/kg) protected against LPS-induced systemic inflammatory response syndrome (SIRS) in mice (all P < 0.05), in a manner similar to dexamethasone (0.03 mmol/kg). Casticin and chrysosplenol D suppressed LPS-induced release of IL-1 beta, IL-6 and MCP-1, inhibited cell migration, and reduced LPS-induced IκB and c-JUN phosphorylation in Raw264.7 cells. JNK inhibitor SP600125 blocked the inhibitory effect of chrysosplenol D on cytokine release. Conclusions: The flavonoids casticin and chrysosplenol D from A. annua L. inhibited inflammation in vitro and in vivo. - Highlights: • We report a new activity of the flavonoids present in Artemisia annua L. • These flavonoids inhibit croton oil-induced ear edema in mice. • These flavonoids protect against LPS-induced SIRS in mice. • These flavonoids suppress inflammation through NF-κB and c-JUN.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1992

Interfacial tension measurement of immiscible liq uids using a capillary tube

The interfacial tension of immiscible liquids is an important thermophysical property that is useful in the behavior of liquids both in microgravity (Martinez et al. (1987) and Karri and Mathur (1988)) and in enhanced oil recovery processes under normal gravity (Slattery (1974)). Many techniques are available for its measurement, such as the ring method, drop weight method, spinning drop method, and capillary height method (Adamson (1960) and Miller and Neogi (1985)). Karri and Mathur mention that many of the techniques use equations that contain a density difference term and are inappropriate for equal density liquids. They reported a new method that is suitable for both equal and unequal density liquids. In their method, a capillary tube forms one of the legs of a U-tube. The interfacial tension is related to the heights of the liquids in the cups of the U-tube above the interface in the capillary. Our interest in this area arose from a need to measure small interfacial tension (around 1 mN/m) for a vegetable oil/silicon oil system that was used in a thermocapillary drop migration experiment (Rashidnia and Balasubramaniam (1991)). In our attempts to duplicate the method proposed by Karri and Mathur, we found it quite difficult to anchor the interface inside the capillary tube; small differences of the liquid heights in the cups drove the interface out of the capillary. We present an alternative method using a capillary tube to measure the interfacial tensions of liquids of equal or unequal density. The method is based on the combined capillary rises of both liquids in the tube.

Rashidnia, N.↗
DOE OSTI2021

Assessment of Plant and Microalgal Oil-Derived Nonisocyanate Polyurethane Products for Potential Commercialization

Green pathways for nonisocyanate polyurethane (NIPU) production have attracted increasing levels of interest. The reaction between 5-membered cyclic carbonate and polyamines is one of the most promising pathways to produce NIPU polymers. Though promising, major technical hurdles such as slow polymerization rate and poor performance hinder the commercialization of NIPU. In this paper, we screened several commercially available triglyceride oil feedstocks for NIPU products, focusing on polymerization kinetics and product performance for industrial application. The impact of carbonated group density on polymerization rate and mechanical strength was determined. We have demonstrated a remarkably higher reactivity of carbonated oil derived from feedstocks with polyunsaturated fatty acid (PUFA). The NIPU derived from such feedstocks also showed improved performance for industrial application. Unlike traditional polyurethane foam production that uses isocyanate and water to generate CO2 as a blowing reagent, there is no gas formation in NIPU polymerization. We have demonstrated a practical and cost-effective approach to produce NIPU foam material using bicarbonate as a blowing reagent. Furthermore, we conducted the first-ever technoeconomic analysis (TEA), revealing that profitable commercial NIPU production can be achieved when operating at sufficient production capacities.

09 BIOMASS FUELS↗
DOE OSTI2022

Divergent evolution of extreme production of variant plant monounsaturated fatty acids

Metabolic extremes provide opportunities to understand enzymatic and metabolic plasticity and biotechnological tools for novel biomaterial production. We discovered that seed oils of many Thunbergia species contain up to 92% of the unusual monounsaturated petroselinic acid (18:1Δ6), one of the highest reported levels for a single fatty acid in plants. Supporting the biosynthetic origin of petroselinic acid, we identified a Δ6-stearoyl-acyl carrier protein (18:0-ACP) desaturase from Thunbergia laurifolia , closely related to a previously identified Δ6-palmitoyl-ACP desaturase that produces sapienic acid (16:1Δ6)-rich oils in Thunbergia alata seeds. Guided by a T. laurifolia desaturase crystal structure obtained in this study, enzyme mutagenesis identified key amino acids for functional divergence of Δ6 desaturases from the archetypal Δ9-18:0-ACP desaturase and mutations that result in nonnative enzyme regiospecificity. Furthermore, we demonstrate the utility of the T. laurifolia desaturase for the production of unusual monounsaturated fatty acids in engineered plant and bacterial hosts. Through stepwise metabolic engineering, we provide evidence that divergent evolution of extreme petroselinic acid and sapienic acid production arises from biosynthetic and metabolic functional specialization and enhanced expression of specific enzymes to accommodate metabolism of atypical substrates.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Synthesis and Performance Evaluation of Unsaturated Polyester Blends of Resins and Its Application on Non-woven/Fabric Jute Fibers Reinforced Composites

The present study focuses on the generation of eco-friendly value added product by utilizing bio-based material as reinforced and matrix phase. Processing of soy and alkyd resin as matrix was carried out by utilization of soy flour and Ricinodendron heudelotii oil, followed essential modification in few inferior properties of soy flour resin by blending with alkyd resin. Separate sets of resin were prepared by maintaining 0%, 5% and 10% of alkyd resin in 100 g of soy flour resin respectively in each set to attain a comparative study on performance of prepared sets of resin blend. Subsequently, performance evaluation of polyester blends was evaluated by processing with non-woven/fabric jute fibers reinforced composites. The blend of R. heudelotii oil based alkyd and soy-flour resin in processing of composites was the noval approach of the study. The resins blend were characterized by FT–IR, viscosity and zeta potential measurements while thermo-mechanical analyses, water absorbancy and surface analyses were performed in composites. Significant increases noticed in the viscosity of blend, the blend containing 10% alkyd resin is two times more viscous compared to soy-flour resin. Furthermore, improvement in properties including water absorption, thermo-mechanical properties and better fiber-matrix interfacial adhesion of the composite could be observed. Higher glass transition temperature T{sub g} value i.e. 126.8 °C obtained for composites with 10% blend as matrix might emphasizes on increase of the degree of cross linking provided by the α-eleostearic fatty acid chain moiety. The enhancements in properties indicate extending opportunities for fiber-reinforced composites in several industries including building material, furniture, aerospace, nano etc.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Metabolic engineering of sugarcane to accumulate energy-dense triacylglycerols in vegetative biomass

Elevating the lipid content in vegetative tissues has emerged as a new strategy for increasing energy density and biofuel yield of crops. Storage lipids in contrast to structural and signaling lipids are mainly composed of glycerol esters of fatty acids, also known as triacylglycerol (TAG). TAGs are one of the most energy-rich and abundant forms of reduced carbon available in nature. Therefore, altering the carbon-partitioning balance in favour of TAG in vegetative tissues of sugarcane, one of the highest yielding biomass crops, is expected to drastically increase energy yields. We report metabolic engineering to elevate TAG accumulation in vegetative tissues of sugarcane. Constitutive co-expression of WRINKLED1 (WRI1), diacylglycerol acyltransferase1-2 (DGAT1-2) and oleosin1 (OLE1) and simultaneous cosuppression of ADP-glucose pyrophosphorylase (AGPase) and a subunit of the peroxisomal ABC transporter1 (PXA1) in transgenic sugarcane elevated TAG accumulation in leaves or stems by 95- or 43-fold to 1.9% or 0.9% of dry weight (DW), respectively, while expression or suppression of one to three of the target genes increased TAG levels by 1.5- to 9.5-fold. Accumulation of TAG in vegetative progeny plants was consistent with the results from primary transgenics and contributed to a total fatty acid content of up to 4.7% or 1.7% of DW in mature leaves or stems, respectively. We saw lipid droplets in mesophyll cells of transgenic leaves by confocal fluorescence microscopy. These results provide the basis for optimizations of TAG accumulation in sugarcane and other high yielding biomass grasses and will open new prospects for biofuel applications.

09 BIOMASS FUELS↗
NASA NTRS1973

Studies of images of short-lived events using ERTS data

The author has identified the following significant results. Of significance are the continued detection and analysis of such short-lived events as forest fires, oil spills, vegetation damage, volcanoes, storm ridges, and earthquakes.

Deutschman, W. A.↗