Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transition Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Toward Full Configuration Interaction for Transition-Metal Complexes

In this work, an efficacious approximation to full configuration interaction (FCI) is adapted to calculate singlet-triplet gaps for transition-metal complexes. This strategy, incremental FCI (iFCI), uses a many-body expansion to systematically add correlation to a simple reference wave function and therefore achieves greatly reduced computational costs compared to FCI. iFCI through the 3-body expansion is demonstrated on four model transition-metal complexes involving the metals Zn, V, and Cu. Screening techniques to increase the computational efficiency of iFCI are proposed and tested, showing reduction in the number of 3-body terms by more than 90% with controlled errors. The largest complex treated by iFCI has 142 valence electrons, all of which are correlated among the full set of 444 active orbitals. Computed spin gaps approach experimental results for the four complexes, though room for improvement remains.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Crystal plasticity modeling and analysis for the transition from intergranular to transgranular failure in nickel-based alloy Inconel 740H at elevated temperature

The precipitation-strengthened Nickel alloy Inconel® 740H® (IN740H) exhibits increased ductility at higher applied strain rates during quasi-static tensile tests at an elevated temperature of 760°C. The examination of fracture surfaces in this context reveals a noteworthy transition of underlying fracture mechanisms from transgranular to intergranular fracture as the applied strain rate decreases from 1×10 -3 / s to 0.83×10 -4 / s . To thoroughly understand the mechanical response of IN740H under these conditions, this study develops a crystal plasticity finite element (CPFE) model. Further, this model incorporates various deformation mechanisms including dislocation slips, climb, and grain boundary sliding, which are relevant to the test conditions. The model is calibrated using data from both tensile tests at different strain rates and creep tests across a broad stress range at 760°C, enabling the accurate determination of model parameters for each mechanism. Simulation results well captured the experimental observations of different failure modes. At higher strain rates, the model shows a dominance of dislocation slip leading to heterogeneous plastic deformation and formation of transgranular shear bands causing the failure, while at lower strain rates, an increased activity of grain boundary sliding causes grain boundaries crack leading to intergranular failure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

New physics in multi-lepton tau decays

Dark particles with lepton-flavor-violating couplings to the tau lepton can induce rare neutrinoless $τ$ decays with large final state multiplicities. We study models where transitions of the type $τ^\pm\to \ell^\pm\,ϕ$, with $ϕ$ a light new particle, initiate a chain of decays in the dark sector that terminate with decays into electrons, muons, or pions. These decay cascades appear as rare five or even seven-body $τ$ decays with multiple reconstructable resonances. We survey several representative models: kinetically mixed dark photon, gauged $L_i-L_j$ models, and other more exotic charge assignments such as chiral $U(1)'$ extensions of the Standard Model. The main new ingredient is the possibility of flavor violation at very high scales. In these models, a number of channels that have not yet been searched for experimentally, such as $τ\to 5μ$, $τ\to 3μ\,2e$, $τ\to μ\,4e$, and hadronic channels like $τ\to μ\,4π$, typically dominate over the previously-considered signatures such as $τ\to 3μ$. While some of the models, such as the gauged $L_i-L_j$ ones, also contain more challenging channels with missing energy due to decays to neutrinos, they can still be searched for via fully visible channels.

Ema, Yohei [Florida U.]↗
DOE OSTI2022

Evidence of a glassy magnetic transition driven by structural disorder in BiFeO 3 nanoparticles

Important effects appear in low and high temperature magnetometry of multiferroic BiFeO 3 (BFO) nanoparticles as sizes are reduced from 105 nm to 18 nm. In these particles, a magnetic transition appears close to 200 K probably associated with a spin reorientation which is absent in bigger particles. At higher temperatures and up to the bulk ferroelectric Curie temperature (1000 K), two additional magnetic transitions can be identified. Around T N 600 K, a size-dependent magnetic transition appears, associated with an antiferromagnetic transition. A model based on atomic vibration instability can describe the variation of T N with nanoparticle size. Furthermore, for certain sizes, the properties are dominated by the glassy state arising from the disorder produced by the formation of a core-shell structure. This implies that the magnetic behavior of nanoparticles is strongly affected by their crystal structure close to the transition temperature. Finally, the structural disorder which couples to the magnetic properties add control to the magnetic and ferroelectric properties of BFO nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling Framework for the Assessment of a Sustainable Hydrogen Production and Supply Chain Network in California

The cost-effective and sustainable deployment of hydrogen supply and demand networks, especially in large economic regions like California, can be challenging considering the spatial-temporal availability and variability of the different actors across the network such as production processes, distribution modes, and end-users. In this presentation, we will provide an overview and demonstration of a modeling framework used to assess the environmental, economic, and human health impacts of plausible hydrogen production and supply chain networks in California. Scenarios focus on green hydrogen production pathways using water electrolysis and biomass gasification. End-use applications included in the model are transit, medium and heavy-duty trucking, port authorities, and power and aviation companies that currently consume natural gas, diesel, and aviation fuel for their day-to-day operation. Representative locations for hydrogen production and end-use are based on recent projections of the hydrogen economy in California. All mass and energy flows, as well as estimated emissions, are based on H2A process model designs and projections of technology performance, literature review, and LBNL process, economic and life cycle modeling, and not on company data for the sake of this presentation. Human health impacts are included following methodologies developed for the University of California Irvine HyDeal project. Life cycle phases associated with hydrogen production include feedstock preparation (water and biomass), energy production and consumption (renewable, grid, and combination of renewable and grid electricity), maintenance (chemical utilization in electrolysis and natural gas combustion in gasification), carbon sequestration, hydrogen storage (compression and liquefaction), and distribution (truck and pipeline). We apply the framework utilizing California specific emission factors, financial data, and human health damages and explore the impact of network characteristics on results. Example variations include: the inclusion of policy incentives or not, different representations of the electricity grid and source, electrolysis versus gasification versus combinations of both for production, liquefaction versus compression based on producer capacity cutoffs, transportation truck versus pipeline based on existing infrastructure, and ultimate end use. Comparison of these different scenarios can help inform future projects by demonstrating the trade-offs among environmental, economic, and human health impacts. This model, automated in R, is a starting platform upon which new analysis, modeling capabilities, locations, and emission factors can be rapidly tested and integrated.

Zaki, Mohammed Tamim↗
DOE OSTI2022

Doping-driven resistive collapse of the Mott insulator in a minimal model for VO 2

Here we study the resistive collapse of the Mott insulator state in the dimer Hubbard model. This minimal model has been used to describe the physics of VO 2 , and should be relevant to other strongly correlated materials. It incorporates the physics of correlated dimers and the explicit competition between on-site Coulomb repulsion and magnetic exchange interactions. Our results unveil that between the Mott insulator at half filling and the Fermi liquid metal at high doping there is an intermediate bad metallic phase with exotic features such as a pseudogap, orbital selectivity, and a first-order metal-metal transition. The model is solved within dynamical mean field theory by means of quantum Monte Carlo, which provides the numerically exact solution of the model in the limit of large lattice dimensionality. This model can be considered as a minimal one that captures exotic phenomena associated to the physics of a doped Mott insulator, shading light on their basic physical mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Integration of Experimental Hydroprocessing and FCC Data with Process (Aspen Plus) and Refinery Optimization (Aspen PIMS) Models

NREL's Economic, Sustainability, and Market Analysis (ESMA) team develops process models in Aspen Plus to support techno-economic analysis (TEA) and life-cycle assessment (LCA) of conversion pathways from renewable and circular resources to fuels and chemicals. These tools are being applied to assess probable operational constraints or bottlenecks associated with refinery co-processing and repurposing opportunities. The team also utilizes optimizable refinery models to quantify opportunities for biofuel and bioproduct pathways through integration with existing refining infrastructure. The goals of analysis are to model the transition of refineries to renewable and circular feedstocks and quantify the costs production and CO2 abatement through utilization of existing refineries. At the core of the ESMA team's work is the process data derived from conversion experiments on hydroprocessing and fluid catalytic cracking performed at NREL. The objective of this presentation is to highlight new analysis approaches and capabilities in pathway analysis and refinery optimization modeling with specific emphasis on integration of experimental data.

BIOMASS FUELS,ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Phase transitions in Schloegl's second model for autocatalysis on a Bethe lattice

Schloegl's second model (also known as the quadratic contact process) on a lattice involves spontaneous particle annihilation at rate p and autocatalytic particle creation at empty sites with n ≥ 2 occupied neighbors. The particle creation rate for exactly n occupied neighbors is selected here as n(n - 1)/[z(z - 1)] for lattice coordination number z. We analyze this model on a Bethe lattice. Precise behavior for stochastic models on regular periodic infinite lattices is usually surmised from kinetic Monte Carlo simulation on a finite lattice with periodic boundary conditions. However, the persistence of boundary effects for a Bethe lattice complicates this process, e.g., by inducing spatially heterogenous states. This motivates the exploration of various boundary conditions and unconventional simulation ensembles on the Bethe lattice to predict behavior for infinite size. Here, we focus on z = 3, and predict a discontinuous transition to the vacuum state on the infinite lattice when p exceeds a threshold value of around 0.053.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Biophysical Impact of Land-Use and Land-Cover Change on Subgrid Temperature in CMIP6 Models

In this study, we investigate the air temperature response to land-use and land-cover change (LULCC; cropland expansion and deforestation) using subgrid land model output generated by a set of CMIP6 model simulations. Our study is motivated by the fact that ongoing land-use activities are occurring at local scales, typically significantly smaller than the resolvable scale of a grid cell in Earth system models. It aims to explore the potential for a multimodel approach to better characterize LULCC local climatic effects. On an annual scale, the CMIP6 models are in general agreement that croplands are warmer than primary and secondary land (psl; mainly forests, grasslands, and bare ground) in the tropics and cooler in the mid–high latitudes, except for one model. The transition from warming to cooling occurs at approximately 40°N. Although the surface heating potential, which combines albedo and latent heat flux effects, can explain reasonably well the zonal mean latitudinal subgrid temperature variations between crop and psl tiles in the historical simulations, it does not provide a good prediction on subgrid temperature for other land tile configurations (crop vs forest; grass vs forest) under Shared Socioeconomic Pathway 5–8.5 (SSP5–8.5) forcing scenarios. A subset of simulations with the CESM2 model reveals that latitudinal subgrid temperature variation is positively related to variation in net surface shortwave radiation and negatively related to variation in the surface energy redistribution factor, with a dominant role from the latter south of 30°N. We suggest that this emergent relationship can be used to benchmark the performance of land surface parameterizations and for prediction of local temperature response to LULCC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Convective Transition Statistics over Tropical Oceans for Climate Model Diagnostics: GCM Evaluation

To assess deep convective parameterizations in a variety of GCMs and examine the fast-time-scale convective transition, a set of statistics characterizing the pickup of precipitation as a function of column water vapor (CWV), PDFs and joint PDFs of CWV and precipitation, and the dependence of the moisture–precipitation relation on tropospheric temperature is evaluated using the hourly output of two versions of the GFDL Atmospheric Model, version 4 (AM4), NCAR CAM5 and superparameterized CAM (SPCAM). The 6-hourly output from the MJO Task Force (MJOTF)/GEWEX Atmospheric System Study (GASS) project is also analyzed. Contrasting statistics produced from individual models that primarily differ in representations of moist convection suggest that convective transition statistics can substantially distinguish differences in convective representation and its interaction with the large-scale flow, while models that differ only in spatial–temporal resolution, microphysics, or ocean–atmosphere coupling result in similar statistics. Most of the models simulate some version of the observed sharp increase in precipitation as CWV exceeds a critical value, as well as that convective onset occurs at higher CWV but at lower column RH as temperature increases. While some models quantitatively capture these observed features and associated probability distributions, considerable intermodel spread and departures from observations in various aspects of the precipitation–CWV relationship are noted. For instance, in many of the models, the transition from the low-CWV, nonprecipitating regime to the moist regime for CWV around and above critical is less abrupt than in observations. Additionally, some models overproduce drizzle at low CWV, and some require CWV higher than observed for strong precipitation. For many of the models, it is particularly challenging to simulate the probability distributions of CWV at high temperature.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Predicting the Pseudocapacitive Windows for MXene Electrodes with Voltage-Dependent Cluster Expansion Models

MXene transition-metal carbides and nitrides are of growing interest for energy storage applications. These compounds are especially promising for use as pseudocapacitive electrodes due to their ability to convert energy electrochemically at fast rates. Using voltage-dependent cluster expansion models, we predict the charge storage performance of MXene pseudocapacitors for a range of electrode compositions. M 3 C 2 O 2 electrodes based on group-VI transition metals have up to 80% larger areal energy densities than prototypical titanium-based (e.g., Ti 3 C 2 O 2 ) MXene electrodes. We attribute this high pseudocapacitance to the Faradaic voltage windows of group-VI MXene electrodes, which are predicted to be 1.2 to 1.8 times larger than those of titanium-based MXenes. The size of the pseudocapacitive voltage window increases with the range of oxidation states that are accessible to the MXene transition metals. Here, by similar mechanisms, the presence of multiple ions in the solvent (Li + and H + ) leads to sharp changes in the transition-metal oxidation states and can significantly increase the charge capacity of MXene pseudocapacitors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Reaction of Atomic Hydrogen with an Imine: Direct Kinetic Measurements and Computational Studies

Imines are of interest in the combustion modeling of nitrogen-based fuels such as ammonia, as intermediates in atmospheric oxidation of amines, and may offer a new class of environmentally benign substitutes for perhalogenated reagents. Elementary gas-phase rate constants for the consumption of H atoms by 1,1,1,3,3,3-hexafluoro-2-propanimine were measured over 294–736 K using the laser flash photolysis/atomic resonance fluorescence technique. The results are summarized as 3.0 × 10 –11 exp(−14.5 kJ mol –1 /RT) cm 3 molecule –1 s –1 with a confidence interval of ±13%. These are the first temperature-dependent kinetic experiments on an imine of the form R 2 C═NH and thereby provide the only validation of transition-state modeling for such systems. Several pathways are feasible; comparison of theory and experiment suggests the dominant channel is addition of H atoms to the nitrogen atom. On this basis, the observations are rationalized quantitatively. Computations also yield the thermochemistry of (CF 3 ) 2 CNH, with Δ f H 298 = −1232 kJ mol –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dominant Energy Carrier Transitions and Thermal Anisotropy in Epitaxial Iridium Thin Films

High aspect ratio metal nanostructures are commonly found in a broad range of applications such as electronic compute structures and sensing. The self-heating and elevated temperatures in these structures, however, pose a significant bottleneck to both the reliability and clock frequencies of modern electronic devices. Any notable progress in energy efficiency and speed requires fundamental and tunable thermal transport mechanisms in nanostructured metals. Here, in this work, time-domain thermoreflectance is used to expose cross-plane quasi-ballistic transport in epitaxially grown metallic Ir(001) interposed between Al and MgO(001). Thermal conductivities ranges from roughly 65 (96 in-plane) to 119 (122 in-plane) W m -1 K -1 for 25.5–133.0 nm films, respectively. Further, low defects afforded by epitaxial growth are suspected to allow the observation of electron–phonon coupling effects in sub-20 nm metals with traditionally electron-mediated thermal transport. Via combined electro-thermal measurements and phenomenological modeling, the transition is revealed between three modes of cross-plane heat conduction across different thicknesses and an interplay among them: electron dominant, phonon dominant, and electron–phonon energy conversion dominant. The results substantiate unexplored modes of heat transport in nanostructured metals, the insights of which can be used to develop electro-thermal solutions for a host of modern microelectronic devices and sensing structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Charge Transport Characteristics of Molecular Electronic Junctions Studied by Transition Voltage Spectroscopy

The field of molecular electronics is prompted by tremendous opportunities for using a single-molecule and molecular monolayers as active components in integrated circuits. Until now, a wide range of molecular devices exhibiting characteristic functions, such as diodes, transistors, switches, and memory, have been demonstrated. However, a full understanding of the crucial factors that affect charge transport through molecular electronic junctions should yet be accomplished. Remarkably, recent advances in transition voltage spectroscopy (TVS) elucidate that it can provide key quantities for probing the transport characteristics of the junctions, including, for example, the position of the frontier molecular orbital energy relative to the electrode Fermi level and the strength of the molecule–electrode interactions. These parameters are known to be highly associated with charge transport behaviors in molecular systems and can then be used in the design of molecule-based devices with rationally tuned electronic properties. This article highlights the fundamental principle of TVS and then demonstrates its major applications to study the charge transport properties of molecular electronic junctions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling-Based Design and Optimization of a Gradient Composite Transition Joint

An innovative additively manufactured gradient composite transition joint (AM-GCTJ) has been designed to join dissimilar metals, to address the pressing issue of premature failure observed in conventional dissimilar metal welds (DMWs) when subjected to increased cyclic operating conditions of fossil fuel power plants. The transition design, guided by computational modeling, developed a gradient composite material distribution, facilitating a smooth transition in material volume fraction and physical properties between different alloys. This innovative design seeks to alleviate structural challenges arising from distinct material properties, including high thermal stress and potential cracking issues resulting from the thermal expansion mismatch typically observed in conventional DMWs. In this study, we investigated the creep properties of transition joints comprising Grade 91 steel and 304 stainless steel through a combination of simulations and creep testing experiments. The implementation of a gradient composite design in the plate transition joint resulted in a significant enhancement of creep resistance when compared to the baseline conventional DMW. For instance, the creep rupture life of the transition joint was improved by > 400% in a wide range of temperature and stress testing conditions. Meanwhile, the failure location shifted to the base material of Grade 91 steel. Such enhancement can be primarily attributed to the strong mechanical constraint facilitated by the gradient composite design, which effectively reduced the stresses on the less creep-resistant alloy in the transition zone. Beyond examining plate joints, it is crucial to assess the deformation response of tubular transition joints under pressure loading and transient temperature conditions to substantiate and demonstrate the effectiveness of the design. The simulation results affirm that the tubular transition joint demonstrates superior resistance compared to its counterpart DMW when subjected to multiaxial stresses in tubular structures. In addition, optimization of the transition joint’s geometry dimensions has been conducted to diminish the accumulated deformation and enhance the service life. Lastly, the scalability and potential of the innovative transition joints for large-diameter pipe applications are addressed.

Zhang, Wei↗
DOE OSTI2025

Band-Selective Spin-Charge Separation across the Charge Density Wave Transition in Quasi-1D NbSe 3

Non-Fermi liquid (non-FL) phase is a pivotal enigma in understanding intriguing quantum phases in strongly correlated systems, such as high-temperature superconductivity. Tomonaga-Luttinger liquid (TLL) theory, designed for one-dimensional (1D) systems, serves as one of the microscopic frameworks that elucidates non-FL behavior. Despite its theoretical concreteness, comprehensive experimental verification has remained incomplete. In particular, addressing the persistence of the TLL nature within ordered phases, such as charge density wave (CDW), has posed a significant challenge. We report the observation of TLL characteristics across the CDW transitions in a quasi-1D material NbSe 3 using angle-resolved photoemission spectroscopy. Spin-charge separation, a disentanglement of spin and charge degrees of freedom of electrons, is clearly observed within the band, accompanied by the suppression of spectral weight following a power-law behavior with anticipated temperature scaling. Surprisingly, the spin-charge separation persists even below the CDW transition temperatures, indicating the validity of the TLL nature in the CDW phase. In conclusion, our findings offer a unique opportunity to explore the interplay between the TLL and ordered phases, which could be connected to the interplay between non-FL and ordered phases in strongly correlated systems.

1-dimensional systems↗
DOE OSTI2020

Competing Interactions between Mesoscale Length-Scales, Order-Disorder, and Martensitic Transformation in Ferromagnetic Shape Memory Alloys

In the present study, the effects of composition and heat treatments and the resulting microstructural changes on the martensitic transformation and ferromagnetic transition have been investigated in NiCoMnIn metamagnetic shape memory alloys. In this shape memory alloy system, it is observed that upon heat treatments at a wide temperature range, the onset temperature of the martensitic transformation follows a non-monotonic behavior with respect to heat treatment time, and the nature of the non-monotonic behavior is also a function of composition. This behavior cannot be attributed to well-known factors such as precipitation, change in local composition due to the precipitation and/or global degree of order. In this work, a systematic investigation through synthesis, thermal processing and characterization via thermo-physical measurements, transmission electron microscopy and in-situ synchrotron x-ray diffraction experiments has been used to correlate the non-monotonic dependence of the martensitic transformation and ferromagnetic transition temperatures to the evolution of L2 1 domains arising from a order/disorder phase transition. A thermodynamic model for the magneto-structural transition is combined with classical nucleation theory to further ascertain the role of microstructural length-scales on the onset of the martensitic transformation. This work thus provides understanding of the thermodynamic and kinetic factors that can be controlled to tune the coupled magneto-structural transformations in NiCoMnIn metamagnetic shape memory alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Indirectly probing the structural change in ion-irradiated Zr-Based metallic glasses from small scale mechanical tests

Ion irradiation was applied to tailor the structural heterogeneities in Zr-based metallic glasses at room temperature. Experimental methods of X-ray diffraction, nanoindentation, and micropillar compression were conducted to examine the irradiation effects on their structural and mechanical property changes. It is found that the irradiated materials retained amorphous structure after room-temperature Ni ion irradiation. The reduction of elastic modulus and hardness measured by nanoindentation indicated the irradiation-induced mechanical degradation. A unified statistic model was employed to quantitatively predict the density and strength of irradiation defects, although their specific structural and physical nature is not explicitly included in this model. The transition of non-intersecting shear bands to multiple intersecting shear bands was observed on compression tests of irradiated micropillars with the increase of irradiation dose. Furthermore, the analysis of the displacement excursion of micropillar compression tests indicated a different deformation mode from the unirradiated state. These results from nanoindentation pop-in and micro-pillar compression tests suggested that irradiation eventually leads to a new state with different types and characteristics of structural heterogeneities from violent displacement cascades and non-equilibrium energy deposition/dissipation processes, which also proves ion irradiation as an effective method to tune the structure and mechanical properties of metallic glasses.

36 MATERIALS SCIENCE↗