Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Photoelectrochemical cells - Conversion of intense optical energy

Conversion of optical energy to chemical energy and/or electrical energy using wet photoelectrochemical cells is described. Emphasis is on (1) the photoelectrolysis of H2O to H2 and O2 using cells having n-type semiconductor photoelectrodes fabricated from TiO2, SnO2, SrTiO3, KTaO3, and KTa(0.77)Nb(0.23)O3, and (2) the conversion of light to electrical energy using CdSe- and CdS-based cells with polysulfide electrolytes.

Wrighton, M. S.↗
NASA NTRS1977

Oxidation in oxygen at 900 deg and 1000 deg C of four nickel-base cast superalloys: NASA-TRW VIA, B-1900, alloy 713C, and IN-738

The oxidation at 900 and 1,000 C of four nickel-base superalloys in 1 atmosphere of slowly flowing oxygen was investigated. Thermogravimetric rate data were obtained for periods to 100 hours. The morphology and composition of the oxide scales formed after 100 hours were studied by optical microscopy, X-ray diffraction, electron microprobe, scanning electron microscopy, and X-ray photoelectron spectroscopy (ESCA). Alloys B-1900 and VIA were found to be primarily alumina formers, though probably 25 percent of their surface was covered by CR2O3-containing oxides at 900 C. Alloys 713C and IN-738 were primarily chromia formers, though the surface of 713C at 1,000 C was covered with NiO, and the surface of IN-738 at both temperatures was covered with a thin layer of TiO2.

Fryburg, G. C.↗
NASA NTRS1977

Space stable thermal control coatings

Both pigment and paint studies were conducted to determine the effect of calcination conditions on optical properties of Zn2TiO4. Paint studies were concerned with the effects of spraying technique, of pigment to binder ratio, and of thickness on the properties of finished coatings. The results are reviewed in detail. Pigments prepared by calcination at 600 deg. to 800 deg. were evaluated. Low temperature syntheses were conducted to determine; (1) extent of ZnO + TiO2 reaction; and (2) the potential of higher peak reflectance with finer particle size powder obtained at lower temperatures.

Harada, Y.↗
NASA NTRS1976

Chemical constraints for mare basalt genesis

Sequential instrumental neutron activation analysis was used to study 10 Apollo-15 rake basalts for 23 bulk, minor and trace elements and 13 basaltic fragments from the Apollo-15 deep drill core 15003 Station 8 for eight major, minor and trace elements. Attention is given here to La-MgO-TiO2 correlations, La/Sm-La and Sm/Eu-La correlations, the La/Sm-Sc correlation, and basalt genesis models.

Ma, M.-S.↗
NASA NTRS1976

Characterization of lunar mare basalt types. I - A remote sensing study using reflection spectroscopy of surface soils

Telescopic reflection spectra of mature mare surfaces are used to identify and characterize major basalt types on the frontside of the moon. The spectra are classified according to (1) continuum slope and (2) near-infrared features. This study indicates that there are major lunar basalt types that are unlikely to have been sampled during the landing missions. Regions of basalt exist in the western maria with a TiO2 content comparable to that of Apollo 11 but with infrared characteristics that indicate a distinctly different composition. Samples from two landing sites, Apollo 12 and Luna 16, may contain fragments of a nearby basalt unit compositionally different from the dominant basalt type of the landing area.

Pieters, C.↗
NASA NTRS1977

Change in the thermionic work function of semiconductor powders exposed to electromagnetic radiation

The variations of the thermoelectronic work function of titanium dioxide, submitted to an ultraviolet or visible and infrared radiation, in the presence of oxygen, are studied by the vibrating condenser method. It is shown that during the ultraviolet irradiation, a desorption of a first species of oxygen simultaneously occurs with the adsorption of a second species of oxygen and that this phenomenon is found for any structure of TiO2 (anatase or rutile) any texture, oxygen pressure, radiation intensity, and nature of introduced dopes.

Bourasseau, S.↗
NASA NTRS1977

Variation in the thermionic work function of semiconductor powders exposed to electromagnetic radiation

The study of the variation of thermoelectronic work function potential of TiO2 in the presence of isobutane shows that this gas is not adsorbed on this solid, in either the presence or the absence of ultraviolet radiation. These results, as well as those obtained in a previous work, lead to the mechanism of the photo-oxidation of isobutane at room temperature, in which excited atomic oxygen is the active species.

Bourasseau, S.↗
NASA NTRS1977

Redox equilibria of multivalent ions in silicate glasses

Experimental studies were made on the compositional dependence of the redox equilibrium of Eu in synthetic silicate liquids, together with an empirical model describing the observed compositional dependence. Electron paramagnetic resonance (EPR) was used to measure the concentration ratio of Eu(2+) to Eu(3+) in various glasses formed by rapidly quenching silicate liquids. The compositional field studied comprised mixtures of SiO2, TiO2, Al2O3, CaO, MgO, and Na2O. The proposed model describes the Eu(2+)/Eu(3+) ratio over the entire compositional field in terms of parameters easily related to each glass composition. The general applicability and utility of the model is further demonstrated by its application to the Fe(2+)-Fe(3+), Ce(3+)-Ce(4+), and Cr(3+)-Cr(6+) redox reactions in binary alkali oxide silicate glasses of Li, Na, and K.

Lauer, H. V., Jr.↗
NASA NTRS1978

The lunar mare basalt suite

Recent studies have greatly expanded knowledge of lunar mare basalts. Since 1976 there has been a revision of the Apollo 12 low-Ti mare basalt suite and the discovery of a new very low-Ti (VLT: less than 1% TiO2) basalt suite at Apollo 17 and in the new Soviet samples from Mare Crisium (LUNA 24). Current studies suggest that the VLT basalts may be in some way related to the enigmatic 'green glasses' which are found in the soils from every lunar landing site. Telescopic studies of spectral reflectance and crater systematics show that basalts of varying Ti content were extruded throughout the history of mare volcanism. These new discoveries indicate that mare basalts can no longer be classified into the two simple groups of older high-Ti basalts and younger low-Ti basalts.

Papike, J. J.↗
NASA NTRS1977

Sulfur in lunar mare basalts as a function of bulk composition

Sulfur abundances and metallic iron abundances in 18 Apollo 12 mare basalts were determined. No correlation between sulfur abundance and metallic iron content was detected; metallic iron abundances are not primarily caused by S loss. Sulfur abundances, directly related to the bulk composition of the rocks and especially to the TiO2 content, increase with increasing degrees of fractionation and appear to result from S concentration in the melts during fractionation. Unlike the Apollo 17 melts, the Apollo 12 melts were unsaturated with respect to sulfide. Composition appears to control S content for Apollo 17 basalts, and cumulus processes may cause Fe-FeS enrichment.

Gibson, E. K., Jr.↗
NASA NTRS1977

Very low Ti /VLT/ basalts - A new mare rock type from the Apollo 17 drill core

Phaneritic fragments, vitrophyres, and glass beads of a new very low Ti (VLT) mare basalt are found in the Apollo 17 drill core. VLT lithic fragments are characterized by TiO2 content of approximately 0.5%, Mg/(Mg + Fe) of approximately 0.52, CaO/Al2O3 of approximately 0.9, and low alkali content. Although mineral systematics and modal composition of VLT basalt are similar to Apollo 12 and 15 low Ti basalts, VLT basalts cannot be related to these mare basalts by crystal fractionation. Since VLT basalt is isochemical with some of the less mafic green glasses, fractionation of VLT magma from a liquid of green-glass composition is a possibility. Spectral reflectance studies suggest that VLT-type basalts may be relatively common in mare basins.

Vaniman, D. T.↗
NASA NTRS1977

Experimental study of pyroxene-liquid interaction in quartz-normative basalt 15597

Equilibrium and controlled cooling rate experiments on a synthetic analog of Apollo 15 quartz normative basalt 15597 are reported. While the partitioning of the major elements Ca, Mg, and Fe between pyroxene and liquid is rate independent, the K sub D parameter for Fe/Mg, which is calculated for low-Ca pyroxene, is temperature dependent. It is suggested that chemical trends observed in lunar pyroxenes are a consequence of three rate processes. The processes are (1) rate-dependent suppression of crystallization of other phases until lower temperature alters liquid composition and, therefore, the composition of the pyroxene that crystallizes; (2) the efficiency of fractional crystallization and the extent of crystal zoning are rate dependent; and (3) the partitioning of Al2O3, TiO2, and Cr2O3 between pyroxene and liquid depends on cooling rate.

Grove, T. L.↗
NASA NTRS1977

Geology of the Luna 24 landing site

The Soviet spacecraft Luna 24 landed at the southeast edge of Mare Crisium on the moon on August 18, 1976. A 160 cm core with a diameter of 8 mm was drilled, extracted, and returned to earth by the spacecraft. A description is presented of the geologic setting at the Luna 24 landing site to provide background information for the study of Luna 24 samples. Interpretations of spectral reflectance data suggest that the Luna 24 landing area is similar in TiO2 content to Oceanus Procellarum. Mare Crisium fills the interior of a circular multiringed impact structure in the eastern hemisphere of the moon. Stratigraphic units within Mare Crisium consist of mare materials and postmare deposits. Aspects of local stratigraphy are discussed, taking into account ray material and mare material. In the vicinity of the Luna 24 landing site, the terrain may be divided into four areas on the basis of topography.

Butler, P., Jr.↗
NASA NTRS1975

Geochemical and geological units of Mare Humorum - Definition using remote sensing and lunar sample information

Mare Humorum has been found to contain at least nine distinct units. Mare basalt units typical of those at the Apollo 12 and 15 sites and central Mare Serenitatis exist also in Mare Humorum, but the early, high-titanium basalts typical of Mare Tranquillitatis and southeast Mare Serenitatis are absent. Basalts containing about 5% TiO2, not sampled at any Apollo site, also are found in Mare Humorum. Emplacement of extensive low-titanium basalts occurred in Mare Humorum in roughly the same period as emplacement of similar basalts at Apollo 12 and central Mare Serenitatis. These were followed by emplacement of the higher titanium basalts during a later period. These and other units are characterized and their extent mapped using a combination of remote sensing and Apollo sample studies. The results are interpreted in the context of the evolution of the Humorum region.

Pieters, C.↗
NASA NTRS1979

Automated Array Assembly, Phase 2

The large scale production of silicon solar cell array panels is discussed. The cost and performance of three manufacturing sequences designed to convert silicon sheet and wafers into solar panels is analyzed. The production of ion implanted and furnace annealed solar cells made using solar grade n- and p-type wafers is examined. The performance of production size lots is examined with regard to the relationship between the ion implant and furnace anneal parameters and the ability to form consistently good thick film screen printed contacts. The spray on antireflection coating process is evaluated. The performance of several lots of cells before and after coating is measured. The structure and refractive index of the RCA I (TiO2) coating is compared with commercial solutions. Sensitivity of coated, screen printed cells to the post heat treatment required to cure the films is assessed.

Daiello, R. V.↗
NASA NTRS1977

Extraction processes for the production of aluminum, titanium, iron, magnesium, and oxygen and nonterrestrial sources

The suitability of existing terrestrial extractive metallurgical processes for the production of Al, Ti, Fe, Mg, and O2 from nonterrestrial resources is examined from both thermodynamic and kinetic points of view. Carbochlorination of lunar anorthite concentrate in conjunction with Alcoa electrolysis process for Al; carbochlorination of lunar ilmenite concentrate followed by Ca reduction of TiO2; and subsequent reduction of Fe2O3 by H2 for Ti and Fe, respectively, are suggested. Silicothermic reduction of olivine concentrate was found to be attractive for the extraction of Mg becaue of the technological knowhow of the process. Aluminothermic reduction of olivine is the other possible alternative for the production of magnesium. The large quantities of carbon monoxide generated in the metal extraction processes can be used to recover carbon and oxygen by a combination of the following methods: (1) simple disproportionation of CO,(2) methanation of CO and electrolysis of H2O, and (3) solid-state electrolysis of gas mixtures containing CO, CO2, and H2O. The research needed for the adoption of earth-based extraction processes for lunar and asteroidal minerals is outlined.

D Bhogeswara Rao↗
NASA NTRS1978

Photoelectrolysis of water at high current density - Use of laser light excitation of semiconductor-based photoelectrochemical cells

In the present paper, some results are given for UV laser light irradiation of the photoanode (SnO2, SrTiO3, or TiO2) in a cell for the light-driven electrolysis of H2O, at radiation intensities of up to 380 W/sq cm. The properties of the anode material are found to be independent of light intensity. Conversion of UV light to stored chemical energy in the form of 2H2/O2 from H2O was driven at a rate of up to 30 W/sq cm. High O2 evolution rates at the irradiated anodes without changes in the current-voltage curves are attributed to the excess oxidizing power associated with photogenerated holes. A test for this sort of hypothesis for H2 evolution at p-type materials is proposed.

Wrighton, M. S.↗