Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Temperature Regime”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Complex magnetic ground state driving a large rotating magnetocaloric effect in Tb 3 Ni at low temperature

The rotating magnetocaloric effect (RMCE) offers a promising alternative to conventional magnetocaloric configurations by taking advantage of magnetic anisotropy to simplify device architecture and enhance refrigeration efficiency. In this study, the RMCE in a high-quality single crystal of Tb 3 Ni is investigated, a compound previously shown to exhibit significant magnetocaloric behavior along its easy axis of magnetization. By measuring the magnetization and corresponding entropy change along the three principal crystallographic axes using a discontinuous measurement protocol, we verify the anisotropic magnetic properties and derive the RMCE from rotations between hard ( a, b ) and easy ( c ) axes of magnetization. Our results show a maximum value for the rotating entropy change of 19.5 J kg −1 K −1 for µ 0 H = 7 T around 60 K, within the critical temperature window for industrial gas liquefaction applications. Neutron diffraction and magnetic Pair-Distribution Function (mPDF) analysis reveal that the origin of this large anisotropic response lies in a partially ordered incommensurate spin-density wave phase and persistent short-range ferromagnetic (FM) correlations. These complex magnetic states enable the release of a substantial amount of magnetic entropy when the field is applied along the easy c-axis, effectively driving the large RMCE. Comparison with other RMCE materials confirms Tb 3 Ni as one of the most promising candidates in this temperature regime, offering both a large magnetic entropy change and a wide operating window.

Gas liquefaction↗
DOE OSTI2023

Meta-analysis of biogas upgrading to renewable natural gas through biological CO 2 conversion

Biogas upgrading through CO 2 conversion by hydrogenotrophic methanogenesis is receiving an increasing attention worldwide because of the demand for renewable natural gas. Herein, a holistic and statistical study of the operation conditions, driving forces, performances, and potential implementation of biogas upgrading via biological CO 2 conversion was conducted. Based on a systematic review and meta-analysis of 46 existing publications that were selected from 1475 papers, we have compiled a global dataset of CO 2 bioconversion biogas upgrading, encompassing 308 study cases. Subsequently, we employed a rigorous analytical framework incorporating data processing and mixed effects linear regression analysis to examine the dataset. This analysis revealed a significant positive relationship between the H 2 :CO 2 ratio and the methane percentage in the upgraded biogas when using the study as a random effect. Furthermore, we performed meta-analysis on observations taken when the ratio was close to 4:1 and found that ex situ reactors (91.93% [88.11%, 95.75%]) can perform better than in situ reactors (84.74% [80.69%, 88.80%]). No evidence of differential performance was found based on the present dataset between different temperature regimes or operation modes. Furthermore, those findings establish a database that will contribute to a deeper understanding of the biogas upgrading via biological CO 2 conversion.

Biogas upgrading↗
DOE OSTI2020

Impact of Cr and Co on 99Tc retention in magnetite: A combined study of ab initio molecular dynamics and experiments

This work explores the effect of co-mingled dopants, Co(II) and Cr(III), on Tc(IV) incorporation and retention in magnetite when heat treated to 625 or 700 °C. Key trends in Tc retention in the high temperature regime were identified using a combination of density-functional-theory based ab initio molecular dynamics (AIMD) simulations, and batch experiments including solid phase characterization techniques, e.g. X-ray absorption spectroscopy. A stabilizing effect on Tc(IV) was observed when the number of Tc and Cr atoms are equal or when the magnetite surface is oversaturated with Tc and Cr inclusions. Here, oversaturation is hypothesized to force Cr from the magnetite surface to form a Cr2O3 phase, which may act as a protective layer that prevents Tc release. With the addition of Co, Tc(IV) is stabilized via redox processes. The presence of Cr in low concentrations interferes with this redox stabilization and Cr is preferentially stabilized as opposed to Tc. As a result, using Co as a stabilizing dopant for Tc may be compromised in the presence of Cr. When the relative concentration of Tc, Cr and Co is the same, or more Co atoms are added to high Cr incorporated systems, the formation of the Cr2O3 phase may be suppressed. Although waste streams with co-mingled Tc and Cr potentially may benefit from a Co dopant, since the formation of a Cr2O3 passivation layer may protect incorporated Tc from being released, the relative concentration of the three elements will be a critical parameter for maximizing effectiveness of this strategy.

Lee, Mal Soon↗
DOE OSTI2022

Computational determination of a primary diffusion mode in γ U-10Mo under irradiation

Low enriched uranium (< 20 % 235 U)-molybdenum (U-Mo) monolithic fuel is the primary candidate for high performance research and test reactors, and is in the process of being qualified to replace highly enriched uranium (≥ 20 % 23 5U) fuel. As part of the qualification process, it is critical to understand and predict the behavior of fission gas bubbles under irradiation, which affects fuel swelling and fuel failure. Mechanistic fuel models are being developed that can both reproduce the existing experimental data for fuel swelling, and be further applied to irradiation conditions beyond the experimental scope. Diffusion of species under irradiation conditions is an important parameter in the mechanistic fuel models; however, no temperature-relevant experimental diffusion data exists. In the present work, radiation-enhanced diffusion coefficients of U, Mo, and Xe in λU-10wt.%Mo were calculated in the temperature range between 300 K and 1400 K via rate-theory models and molecular dynamics simulations with an embedded-atom method interatomic potential for the U-Mo-Xe system. Accordingly, total diffusion coefficients under relevant irradiation conditions are determined using previously obtained intrinsic thermal diffusion and radiation-driven diffusion coefficients, as well as the newly calculated radiation-enhanced diffusion coefficients presented herein. Radiation-enhanced diffusion of U and Mo was dominant in the intermediate temperature range, whereas radiation-enhanced diffusion of Xe did not significantly contribute to total diffusion of Xe at the relevant fission rate densities. Radiation-enhanced diffusion of Xe became faster than both intrinsic thermal diffusion and radiation-driven diffusion at a fission rate density of 5 x 10 22 fissions/m 3 /s, which is higher than the typical fission rate density range in research reactors. The temperature regime that radiation-enhanced diffusion of each element dominated was dependent on the fission rate density. Finally, the total diffusion coefficients of U, Mo, and Xe, updated in this work, will be utilized as parameters in the mechanistic fuel models to help predict the behavior of fission gas bubbles under irradiation more accurately.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Analysis of position-dependent cavity parameters in irradiated metals to obtain insight on fundamental defect migration phenomena

Motion of point defects is a fundamental process that governs microstructure and properties of materials. Here, we examine the near-surface and grain boundary cavity swelling depth profiles in neutron- and ion-irradiated simple metals (Cu, Ni, and Fe-Cr) and investigate diffusional broadening of implanted Ni ions in Fe-Cr alloys. Vacancy migration energies and radiation-enhanced diffusion were experimentally estimated. Cavity denuded zone widths near planar sinks are shown to be dependent on temperature, damage rate, balance of point defects and sinks, and vacancy migration energies. An enhanced cavity swelling zone adjacent to the void-denuded zone was observed in specimens with low to moderate sink strength and interpreted as evidence of 1D gliding interstitial clusters. Radiation-enhanced diffusional broadening of implanted Ni ions (at 400–550 °C) in Fe and Fe-Cr was up to 250 nm toward the surface, which leads to a much broader near-peak-damage region where cavity swelling is suppressed. Diffusional broadening of implanted ions is calculated to be similarly pronounced for self-ion irradiations, particularly near the peak and higher swelling temperature regimes. Adequately high ion energies (~8–15 MeV) are recommended for ion-irradiation studies to provide a sufficiently broad midrange safe analysis region with minimized surface and injected ion effects.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Large non-saturating Nernst thermopower and magnetoresistance in compensated semimetal ScSb

Today, high-performance thermoelectric and thermomagnetic materials operating in the low-temperature regime, particularly below the boiling point of liquid nitrogen remain scarce. Most thermomagnetic materials reported to date exhibit a strong Nernst signal along specific crystallographic directions in their single-crystal form. However, their performance typically degrades significantly in the polycrystalline form. Here, we report an improved Nernst thermopower of ~ 128 μV/K at 30 K and 14 T in polycrystalline compensated semimetal ScSb, in comparison to that was observed in single crystal ScSb previously. The magnetic field dependence of Nernst thermopower shows a linear and non-saturating behavior up to 14 T. The maximum Nernst power factor reaches to ~ 240 x 10 -4 W m −1 K −2 and Nernst figure of merit reaches to ~ 11 x 10 -4 K −1 . Polycrystalline ScSb also shows a large non-saturating magnetoresistance of ~ 940% at 2 K and 14 T. These enhanced properties originate from better electron–hole compensation, as revealed by Hall resistivity measurements. In conclusion, the cubic symmetry and absence of anisotropy in ScSb allow its polycrystalline form to achieve similar enhanced thermomagnetic and electromagnetic performance comparable to that of the single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

The Role of Methylaryl Radicals in the Growth of Polycyclic Aromatic Hydrocarbons: The Formation of Five-Membered Rings

The regions of the C 13 H 11 potential energy surface (PES) related to the unimolecular isomerization and decomposition of the 1-methylbiphenylyl radical and accessed by the 1-/2-methylnaphthyl + C 2 H 2 reactions have been explored by ab initio G3(MP2,CC)//B3LYP/6-311G(d,p) calculations. The kinetics of these reactions relevant to the growth of polycyclic aromatic hydrocarbons (PAH) under high-temperature conditions in circumstellar envelopes and in combustion flames has been studied employing the RRKM-Master Equation approach. The unimolecular reaction of 1-methylbiphenylyl proceeding via a five-membered ring closure followed by H elimination is predicted to be very fast, on a submicrosecond scale above 1000 K and to result in the formation of an embedded five-membered ring in the 9H-fluorene product. The 1-/2-methylnaphthyl + C 2 H 2 reaction mechanism involves acetylene addition to the radical on the methylene group followed by a six- or five-membered ring closure and aromatization via an H atom loss. Despite of the complexity of the C 13 H 11 PES, these straightforward pathways are dominant in the high-temperature regime (above ~1000 K), with the prevailing products being phenalene, with a significant contribution of 1H-cyclopenta(a)naphthalene, for 1-methylnaphthyl + C 2 H 2 , and 1H-cyclopenta(b)naphthalene and 3H-cyclopenta(a)naphthalene, for 2-methylnaphthyl + C 2 H 2 . The methylnaphthyl reactions with acetylene represent a clean source of the three-ring PAHs, but they are relatively slow owing to the high entrance barriers of ~10 kcal/mol, with the rate constants of about an order of magnitude lower as compared to those for naphthyl + allene and σ-aryl + C 2 H 2 . Here, the 1-methylnaphthyl + C 2 H 2 and 2-methylnaphthyl + C 2 H 2 reactions represent prototypes for PAH growth by an extra six- and five-membered ring on a zigzag edge or a corner of PAH and the generated modified Arrhenius expressions are recommended for kinetic modeling of PAH expansion by the mechanism of acetylene addition to methylaryl radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cryogenic Reduction of Surface-Bound HKUST-1Crystallites

HKUST-1 is a canonical Cu-based metal-organic framework (MOF) with potential roles in catalysis. A convenient hydroxy double salt templating synthesis was used to produce a thin layer of HKUST-1 crystallites amenable to surface science spec-troscopies under controlled conditions. To study the nature of the Cu sites, N2 and CO2 were adsorbed at cryogenic tempera-tures as passive probe molecules for Cu2+ sites. CO, which is commonly used as a probe molecule of both Cu2+ and Cu1+ sites in porous materials, was found to be a non-innocent probe molecule that reduces the Cu2+ and forms CO2. Isotopically labeled 13CO confirmed the Cu2+ reduction and CO oxidation. The results offer a way to tune Cu oxidation states in HKUST-1, even in the cryogenic temperature regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mechanism of the Accelerated Water Formation Reaction under Interfacial Confinement

Subnanoscale spaces at the interface between weakly coupled thin films and their metal supports offer exciting opportunities for studying chemical reactions under confinement. Here, we investigated the kinetics of water formation (from hydrogen and chemisorbed oxygen) in the confined space at the interface between bilayer (BL) silica and a Ru(0001) support, compared to the reaction on the bare Ru(0001) surface. Ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments were carried out at different temperatures at elevated pressures of H 2 to follow the reaction kinetics. The apparent activation energy at the BL-silica/Ru(0001) interface was found to be 0.38 eV lower than that on bare Ru(0001), consistent with a recent report by Prieto et al. (Angew. Chem., Int. Ed.2018, 57(28), 8749–8753) carried out at lower H 2 pressures using low-energy electron microscopy. Density functional theory calculations revealed that the rate-limiting step in the direct hydrogenation pathway on the Ru(0001) surface is the first hydrogen addition step (*H + *O ↔ *OH). The confinement at the BL-silica/Ru(0001) interface only marginally affects the energy barrier of the first hydrogen addition. Instead, it activates an alternative disproportionation reaction pathway (*H 2 O + *O ↔ 2*OH). On the bare Ru(0001) surface, the disproportionation pathway can only occur at cryogenic temperatures or under high water vapor pressures. However, the presence of the BL-silica increases the desorption barrier for water molecules at the interface. The increased residence time allows trapped water molecules to react with chemisorbed oxygen to produce two *OH per H 2 O with an activation energy 0.25 eV lower than that of the first hydrogen addition step. Finally, this work reveals the origin of the observed accelerated water formation reaction at the BL-silica/Ru(0001) interface in the low-temperature regime (T < 350 K) and points to a route to engineer chemical reaction pathways by leveraging subnanoscale confined spaces at metal–oxide interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2020

River Regulation Alleviates the Impacts of Climate Change on US Thermoelectricity Production

Climate change and anthropogenic activities can both influence stream temperature, which is a critical indicator of thermoelectric power generation potential. Previous studies emphasized the vulnerability of power-generation systems to climate warming (ref 1, 2). Despite the fact that two-thirds of the global rivers are regulated by dams (ref 3), the relative impacts of water management and climate change on stream temperature and thermoelectric production have not yet been evaluated. Using an integrated modeling system applied to the conterminous United States, simulations confirm the dominant role of climate change in shaping the future trends of stream temperature. However, water management, reservoir regulation in particular, can mitigate the stream temperature warming and reduce the frequency and magnitude of extreme high stream temperatures through redistribution of the seasonal streamflow. Moreover, water management can alleviate the loss of power plant usable capacity from climate change to the level of reduced warming from emission mitigation. By regulating the flow and temperature regimes, water management is a promising adaptation measure to alleviate climate change induced effects in the water-energy nexus.

Zhang, Xiao↗
DOE OSTI2022

Latitude, Elevation, and Mean Annual Temperature Predict Peat Organic Matter Chemistry at a Global Scale

Peatlands contain a significant fraction of global soil carbon, but how these reservoirs will respond to the changing climate is still relatively unknown. A global picture of the variations in peat organic matter chemistry will aid our ability to gauge peatland soil response to climate. Here, the goal of this research is to test the hypotheses that (a) peat carbohydrate content, an indicator of soil organic matter reactivity, will increase with latitude and decrease with mean annual temperatures, (b) while peat aromatic content, an indicator of recalcitrance, will vary inversely, and (c) elevation will have a similar effect to latitude. We used Fourier Transform Infrared Spectroscopy to examine variations in the organic matter functional groups of 1034 peat samples collected from 10 to 20, 30–40, and 60–70 cm depths at 165 individual sites across a latitudinal gradient of 79°N–65°S and from elevations of 0–4,773 m. Carbohydrate contents of high latitude peat were significantly greater than peat originating near the equator, while aromatic content showed the opposite trend. For peat from similar latitudes but different elevations, the carbohydrate content was greater and aromatic content was lower at higher elevations. Higher carbohydrate content at higher latitudes indicates a greater potential for mineralization, whereas the chemical composition of low latitude peat is consistent with their apparent relative stability in the face of warmer temperatures. The combination of low carbohydrates and high aromatics at warmer locations near the equator suggests the mineralization of high latitude peat until reaching recalcitrance under a new temperature regime.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Kondo screening in a Majorana metal

Kondo impurities provide a nontrivial probe to unravel the character of the excitations of a quantum spin liquid. In the S = 1/2 Kitaev model on the honeycomb lattice, Kondo impurities embedded in the spin-liquid host can be screened by itinerant Majorana fermions via gauge-flux binding. Here, we report experimental signatures of metallic-like Kondo screening at intermediate temperatures in the Kitaev honeycomb material α-RuCl 3 with dilute Cr 3+ (S = 3/2) impurities. The static magnetic susceptibility, the muon Knight shift, and the muon spin-relaxation rate all feature logarithmic divergences, a hallmark of a metallic Kondo effect. Concurrently, the linear coefficient of the magnetic specific heat is large in the same temperature regime, indicating the presence of a host Majorana metal. This observation opens new avenues for exploring uncharted Kondo physics in insulating quantum magnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Predicting temperature-dependent ultimate strengths of body-centered-cubic (BCC) high-entropy alloys

This paper presents a bilinear log model, for predicting temperature-dependent ultimate strength of high-entropy alloys (HEAs) based on 21 HEA compositions. We consider the break temperature, T break , introduced in the model, an important parameter for design of materials with attractive high-temperature properties, one warranting inclusion in alloy specifications. For reliable operation, the operating temperature of alloys may need to stay below T break . We introduce a technique of global optimization, one enabling concurrent optimization of model parameters over low-temperature and high-temperature regimes. Furthermore, we suggest a general framework for joint optimization of alloy properties, capable of accounting for physics-based dependencies, and show how a special case can be formulated to address the identification of HEAs offering attractive ultimate strength. We advocate for the selection of an optimization technique suitable for the problem at hand and the data available, and for properly accounting for the underlying sources of variations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Drop impact on hot plates: contact times, lift-off and the lamella rupture

When a liquid drop impacts on a heated substrate, it can remain deposited, or violently boil in contact, or lift off with or without ever touching the surface. The latter is known as the Leidenfrost effect. The duration and area of the liquid–substrate contact are highly relevant for the heat transfer, as well as other effects such as corrosion. However, most experimental studies rely on side view imaging to determine contact times, and those are often mixed with the time until the drop lifts off from the substrate. In this work, we develop and validate a reliable method of contact time determination using high-speed X-ray imaging and total internal reflection imaging. We exemplarily compare contact and lift-off times on flat silicon and sapphire substrates. We show that drops can rebound even without formation of a complete vapor layer, with a wide range of lift-off times. On sapphire, we find a local minimum of lift-off times that is much shorter than expected from capillary rebound in the comparatively low-temperature regime of transition boiling/thermal atomization. We elucidate the underlying mechanism related to spontaneous rupture of the lamella and receding of the contact area.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Electronic structure and optical properties of quantum crystals from first principles calculations in the Born–Oppenheimer approximation

In this work, we develop a formalism to accurately account for the renormalization of the electronic structure due to quantum and thermal nuclear motions within the Born–Oppenheimer approximation. We focus on the fundamental energy gap obtained from electronic addition and removal energies from quantum Monte Carlo calculations in either the canonical or grand-canonical ensembles. The formalism applies as well to effective single electron theories such as those based on density functional theory. We show that the electronic (Bloch) crystal momentum can be restored by marginalizing the total electron–ion wave function with respect to the nuclear equilibrium distribution, and we describe an explicit procedure to establish the band structure of electronic excitations for quantum crystals within the Born–Oppenheimer approximation. Based on the Kubo–Greenwood equation, we discuss the effects of nuclear motion on optical conductivity. Our methodology applies to the low temperature regime where nuclear motion is quantized and, in general, differs from the semi-classical approximation. We apply our method to study the electronic structure of C2/c-24 crystalline hydrogen at 200 K and 250 GPa and discuss the optical absorption profile of hydrogen crystals at 200 K and carbon diamond at 297 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rare-earth orbital moment contributions to the magnetic anisotropy in magnetostrictive Tb0.3Dy0.7Fe2

Soft x-ray Magnetic Circular Dichroism spectroscopy at the Dy and Tb M4,5 and the Fe L2,3 edges was performed on a sputter deposited polycrystalline Terfenol-D (Tb0.3Dy0.7Fe2) film on sapphire substrates at temperatures from 100 to 300 K to evaluate the elementwise contribution to the magnetocrystalline anisotropy and coercive field. The elemental spin and orbital magnetic moments were calculated using the x-ray Magnetic Circular Dichroism sum rules. As temperatures decreased, the Tb and Fe moments plateau at 200 K with values of 7.6 μB/atom and 1.8 μB/atom, respectively, while the Dy moment increases to 8.9 μB/atom at 100 K. Between 300 and 200 K, the change in magnetic anisotropy is dominated by thermally induced magnetoelastic effects while for temperatures below 200 K magnetocrystalline anisotropy (MCA) changes are dominant. The MCA changes below 200 K appear to be due to increases in the Dy orbital moment with decreasing temperature in this temperature regime.

Shirazi, Paymon (ORCID:0000000256954597)↗
DOE OSTI2022

The Gaussian nature of the band-edge of ZnO microcrystalline thin films

A straightforward analytical approach based on the derivative of the absorption coefficient is presented, which enables probing the nature of the band edge (BE) of ZnO microcrystalline films. The study was conducted via transmission experiments at temperatures of 77–532 K and repeated for samples annealed up to 1073 K. It was found that the derivative of the natural log of the BE absorption coefficient resulted in a Gaussian function. The Gaussian linewidth is used in the electron–phonon (e–p) interaction model to characterize the defect-state of the films. The BE of the as-grown film was found to exhibit no thermal dependence and no e–p coupling, indicative of a disordered crystal. Upon annealing and improvement of the film quality, the thermal phonons became more activated, but only above room temperature with a phonon energy of ~75 meV, while up to room temperature, the impact of phonons on the BE is insignificant. A disorder–order transition was determined to take place at an annealing temperature of ~673 K. X-ray diffraction concurs with these results. The study indicates that the prevalent defects are of structural nature due to the inherent granular morphology of the films. This defect was found to dominate the behavior of the BE even at the elevated temperature regime rather than thermal phonons.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Utility of Shockley–Read–Hall analysis to extract defect properties from semiconductor minority carrier lifetime data

The semiconductor minority carrier lifetime contains information about several important material properties, including Shockley–Read–Hall defect levels/concentrations and radiative/Auger recombination rates, and the complex relationships between these parameters produce a non-trivial temperature-dependence of the measured lifetime. It is tempting to fit temperature-dependent lifetime data to extract the properties of the Shockley–Read–Hall recombination centers; however, without a priori knowledge of the distribution of the Shockley–Read–Hall states across the bandgap, this fit problem is under-constrained in most circumstances. Shockley–Read–Hall lifetime data are not well-suited for the extraction of Shockley–Read–Hall defect levels but can be used effectively to extract minority carrier recombination lifetimes. The minority carrier recombination lifetime is observed at temperatures below 100 K in a Si-doped n-type InGaAs/InAsSb superlattice, and deviation from its expected temperature-dependence indicates that the capture cross section of the defect associated with Si-doping has an activation energy of 1.5 meV or a characteristic temperature of 17 K. This lower temperature regime is also preferrable for the analysis of the physics of defect introduction with displacement-damage-generating particle irradiation.

Physics↗