Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Temperature-dependent magnetic properties of individual glass spherules, Apollo 11, 12, and 14 lunar samples.

Magnetic susceptibility of 11 glass spherules from the Apollo 14 lunar fines have been measured from room temperature to 4 K. Data taken at room temperature, 77 K, and 4.2 K, show that the soft saturation magnetization was temperature independent. In the temperature range 300 to 77 K the temperature-dependent component of the magnetic susceptibility obeys the Curie law. Susceptibility measurements on these same specimens and in addition 14 similar spherules from the Apollo 11 and 12 mission show a Curie-Weiss relation at temperatures less than 77 K with a Weiss temperature of 3-7 degrees in contrast to 2-3 degrees found for tektites and synthetic glasses of tektite composition. A proposed model and a theoretical expression closely predict the variation of the susceptibility of the glass spherules with temperature.

Thorpe, A. N.↗

Temperature dependence of the deactivation of O/1D/ by CO from 113-333 K

Absolute rate constants for the deactivation of O(1D) by CO have been measured at temperatures between 113 and 333 K. A very small temperature dependence is observed and is described by the Arrhenius expression (4.7 + or - 0.9) times 10 to the -11th power exp(126 + or 33)/RT cu cm/molecule-sec, where E is in cal/mol.

Davidson, J. A.↗

Temperature-dependent reflectivity of silicon carbide

The spectral reflectivity of a commercial silicon carbide (SiC) ceramic surface was measured at wavelengths from 2.5 to 14.5 microns and at temperatures ranging from 358 to 520 K using a NASA-developed multiwavelength pyrometer. The SiC surface reflectivity was low at the short wavelengths, decreasing to almost zero at 10 microns, then increasing rapidly to a maximum at approximately 12.5 microns, and decreasing gradually thereafter. The reflectivity maximum increased in magnitude with increasing surface temperature. The wavelength and temperature dependence can be explained in terms of the classical dispersion theory of crystals and the Lorentz electron theory. Electronic transitions between the donor state and the conduction band states were responsible for the dispersion. The concentration of the donor state in SiC was determined to be approximately 4 x 10 exp 18 and its ionization energy was determined to be approximately 71 meV.

Ng, Daniel↗

Ultraviolet absorption cross-sections of some carbonyl compounds and their temperature dependence

Ultraviolet absorption cross-section of phosgene (CCl2O), trichloroacetylchloride (CCl3-CClO) and trichloroacetaldehyde (CCl3-CHO) have been measured between 170 and 320 nm for temperature ranging from 210 to 295 K with classical double beam equipment. These data are compared with other available determinations performed at room temperature. Photodissociation coefficients are estimated and their temperature dependence is discussed. Impact of the photodissociation on the total atmospheric destruction of these compounds is illustrated.

Gillotay, D.↗

The effects of incomplete annealing on the temperature dependence of sheet resistance and gage factor in aluminum and phosphorus implanted silicon on sapphire

Partial annealing of damage to the crystal lattice during ion implantation reduces the temperature coefficient of resistivity of ion-implanted silicon, while facilitating controlled doping. Reliance on this method for temperature compensation of the resistivity and strain-gage factor is discussed. Implantation conditions and annealing conditions are detailed. The gage factor and its temperature variation are not drastically affected by crystal damage for some crystal orientations. A model is proposed to account for the effects of electron damage on the temperature dependence of resistivity and on silicon piezoresistance. The results are applicable to the design of silicon-on-sapphire strain gages with high gage factors.

Pisciotta, B. P.↗

Temperature Dependence of the O + HO2 Rate Coefficient

A pulsed laser photolysis technique has been employed to investigate the kinetics of the radical-radical reaction O((sup 3)P) + HO2 OH + O2 over the temperature range 266-391 K in 80 Torr of N2 diluent gas. O((sup 3)P) was produced by 248.5-nm KrF laser photolysis of O3 followed by rapid quenching of O(1D) to O((sup 3)P) while HO2 was produced by simultaneous photolysis of H2O2 to create OH radicals which, in turn, reacted with H2O2 to yield HO2. The O((sup 3)P) temporal profile was monitored by using time-resolved resonance fluorescence spectroscopy. The HO2 concentration was calculated based on experimentally measured parameters. The following Arrhenius expression describes our experimental results: k(sub 1)(T) equals (2.91 +/- 0.70) x 10(exp -11) exp[(228 +/- 75)/T] where the errors are 2 sigma and represent precision only. The absolute uncertainty in k, at any temperature within the range 266-391 K is estimated to be +/- 22 percent. Our results are in excellent agreement with a discharge flow study of the temperature dependence of k(sub 1) in 1 Torr of He diluent reported by Keyser, and significantly reduce the uncertainty in the rate of this important stratospheric reaction at subambient temperatures.

Nicovich, J. M.↗

Analysis of temperature-dependent neutron transmission and self-indication measurements on tantalum at 2-keV neutron energy

The method of pseudo-resonance cross sections is used to analyze published temperature-dependent neutron transmission and self-indication measurements on tantalum in the unresolved region. In the energy region analyzed, 1825.0 to 2017.0 eV, a direct application of the pseudo-resonance approach using a customary average strength function will not provide effective cross sections which fit the measured cross section behavior. Rather a local value of the strength function is required, and a set of resonances which model the measured behavior of the effective cross sections is derived. This derived set of resonance parameters adequately represents the observed resonance hehavior in this local energy region. Similar analyses for the measurements in other unresolved energy regions are necessary to obtain local resonance parameters for improved reactor calculations. This study suggests that Doppler coefficients calculated by sampling from grand average statistical distributions over the entire unresolved resonance region can be in error, since significant local variations in the statistical distributions are not taken into consideration.

Semler, T. T.↗

Temperature dependence of the reaction NO + NO3 - 2NO2

The flash photolysis-visible absorption technique has been used to measure rate constants for the reaction NO + NO3 2NO2 over the temperature range 224-328 K. The temperature dependence of the rate constant is given by the expression K1(T) = (1.59 + or - 0.32) x 10 to the -11th exp(122/T)cu cm/molecule/s where the stated uncertainties refer to the + or - sigma limits from both random and systematic errors.

Sander, S. P.↗

Study of temperature-dependent ultrathin oxide growth on Si(111) using variable-angle spectroscopic ellipsometry

The monolayer-sensitive variable-angle spectroscopic ellipsometry technique was used to study the temperature-dependent growth mechanisms of an ultrathin oxide layer on top of silicon. The oxidation was done in atomic oxygen produced in a pure oxygen plasma and driven by an RF power source. The results have been compared with the recently proposed model of Murali and Murarka for ultrathin oxide growth on top of silicon. The activation energies of different growth parameters associated with the oxide growth have also been determined.

De, Bhola N.↗

Temperature-Dependent Refractive Index Measurements of Caf2, Suprasil 3001, and S-FTM16 for the Euclid Near Infrared Spectrometer and Photometer

Using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, we measured absolute refractive indices at temperatures from 100 to 310 K at wavelengths from 0.42 to 3.6 microns for CaF2, Suprasil 3001 fused silica, and S-FTM16 glass in support of lens designs for the Near Infrared Spectrometer and Photometer (NISP) for ESA's Euclid dark energy mission. We report absolute refractive index, dispersion (dn/dλ), and thermo-optic coefficient (dn/dT) for these materials. In this study, materials from different melts were procured to understand index variability in each material. We provide temperature-dependent Sellmeier coefficients based on our data to allow accurate interpolation of index to other wavelengths and temperatures. For calcium fluoride (CaF2) and S-FTM16, we compare our current measurements with CHARMS measurements of these materials made in the recent past for other programs. We also compare Suprasil 3001's indices to those of other forms of fused silica we have measured in CHARMS.

geometrical optics↗

Hartmann flow with temperature-dependent physical properties

Attention is given to the steady, fully developed, one-dimensional flow of a liquid metal in which thermal conductivity, electrical conductivity, and viscosity are functions of temperature. It is found that the properties are decreasing functions of temperature and the first differences between temperature-dependent and constant properties are discussed.

Linn, G. T.↗

Line-width temperature dependence of selected R-branch transitions in the nu-3 fundamental of (N-14)2O-16 between 135 and 295 K

Tunable diode laser spectroscopy has been used to measure the temperature dependence of N2 foreign gas broadening coefficients for eight R-branch transitions in the nu-3 fundamental of (N-14)2O-16 at 135, 176, 210, and 295 K. The exponent n of the relation for quadrupole-quadrupole collisional interactions is found to range from 0.66 to 0.71, in approximate agreement with the theoretically predicted value of 0.75.

Loewenstein, Max↗

Temperature-dependent Absolute Refractive Index Measurements of Synthetic Fused Silica

Using the Cryogenic, High-Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, we have measured the absolute refractive index of five specimens taken from a very large boule of Corning 7980 fused silica from temperatures ranging from 30 to 310 K at wavelengths from 0.4 to 2.6 microns with an absolute uncertainty of plus or minus 1 x 10 (exp -5). Statistical variations in derived values of the thermo-optic coefficient (dn/dT) are at the plus or minus 2 x 10 (exp -8)/K level. Graphical and tabulated data for absolute refractive index, dispersion, and thermo-optic coefficient are presented for selected wavelengths and temperatures along with estimates of uncertainty in index. Coefficients for temperature-dependent Sellmeier fits of measured refractive index are also presented to allow accurate interpolation of index to other wavelengths and temperatures. We compare our results to those from an independent investigation (which used an interferometric technique for measuring index changes as a function of temperature) whose samples were prepared from the same slugs of material from which our prisms were prepared in support of the Kepler mission. We also compare our results with sparse cryogenic index data from measurements of this material from the literature.

Leviton, Douglas B.↗

The No Vibrational Fundamental Band: Temperature Dependence of N2- Broadening Coefficients

Rovibrational spectra of the vibrational fundamental of nitric oxide have been recorded under N2-broadening conditions using the Solar McMath FTS at the Kitt Peak National Observatory. The temperature range for the experiments was 296K to 183K. Qualitative as well as quantitative discrepancies are observed between these experimental determinations of the temperature dependence.

nitric oxide broadening coefficients vibrational f↗

Temperature Dependent Electrical and Micromechanical Properties of Lanthanum Titanate with Additions of Yttria

Lanthanum titanate (La2Ti2O7) a layered distorted perovskite (1) with space group Pna2(sub 1) has been shown to have potential as a high temperature piezoelectric (2). However this highly refractory oxide compound must be consolidated at relatively high temperatures approximately 1400 C. Commercial La2Ti207 powders were mechanically alloyed with additions of Y2O3 to lower the consolidation temperature by 300 C and to provide post processing mechanical stability. Temperature dependent electrical, elastic and anelastic behavior were selected as nondestructive means of evaluating the effects of yttria on the properties of this ferroceramic material.

Goldsby, Jon C.↗

Thermal stresses in a spherical pressure vessel having temperature-dependent, transversely isotropic, elastic properties

Rayleigh-Ritz and modified Rayleigh-Ritz procedures are used to construct approximate solutions for the response of a thick-walled sphere to uniform pressure loads and an arbitrary radial temperature distribution. The thermoelastic properties of the sphere are assumed to be transversely isotropic and nonhomogeneous; variations in the elastic stiffness and thermal expansion coefficients are taken to be an arbitrary function of the radial coordinate and temperature. Numerical examples are presented which illustrate the effect of the temperature-dependence upon the thermal stress field. A comparison of the approximate solutions with a finite element analysis indicates that Ritz methods offer a simple, efficient, and relatively accurate approach to the problem.

Tauchert, T. R.↗

Temperature dependence of HNO3 absorption in the 11.3-micron region

Laboratory spectra have been obtained for HNO3 with a Michelson-type Fourier transform interferometer using absorption cells with path lengths of 10.3, 25.5, and 49.8 cm at temperatures of 240, 248, 283, and 294 K. The measurements lead to a total band intensity value of 642 plus or minus 5% per sq cm amagat, which is a temperature independent value after the gas density correction has been made. However, the temperature dependence of the spectral absorption coefficients is apparent in the 885 kayser region.

Goldman, A.↗

Temperature dependence of the rate constants for reactions of O/1D/ atoms with a number of halocarbons

Results are reported for an experimental study of the reactions of O(1D) with CCl4, CFCl3, CF2Cl2, CHFCl2, CHF2Cl, and CF2ClCFCl2 over the temperature range from 173 to 343 K, based on the time-resolved emission of O(1D) at 630 nm. The experiments involved photolysis of O3 by Nd-YAG laser pulses and measurements of 630-nm emission intensity in mixtures with He and the various halocarbons. Pseudo-first-order rate constants are derived from plots of the logarithms of the 630-nm emission intensities as a function of time for particular He/O3/halocarbon mixtures, and second-order rate constants are then obtained from plots of these pseudo-first-order rate constants as a function of halocarbon concentration at constant He and O3 concentrations. No temperature dependence of the second-order rate constants is observed over the range studied, within the precision of the measurements. It is found that the rate constants decrease as H is substituted for Cl in a halocarbon molecule and as F is substituted for H or Cl.

Davidson, J. A.↗