Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “T^3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Free‐Standing α‐MoO 3 / Ti 3 C 2 MXene Hybrid Electrode in Water‐in‐Salt Electrolytes

While transition‐metal oxides such as α‐MoO 3 provide high capacity, their use is limited by modest electronic conductivity and electrochemical instability in aqueous electrolytes. Two‐dimensional (2D) MXenes, offer metallic conductivity, but their capacitance is limited in aqueous electrolytes. Insertion of partially solvated cations into Ti 3 C 2 MXene from lithium‐based water‐in‐salt (WIS) electrolytes enables charge storage at positive potentials, allowing a wider potential window and higher capacitance. Herein, we demonstrate that α‐MoO 3 /Ti 3 C 2 hybrids combine the high capacity of α‐MoO 3 and conductivity of Ti 3 C 2 in WIS (19.8 m LiCl) electrolyte in a wide 1.8 V voltage window. Cyclic voltammograms reveal multiple redox peaks from α‐MoO 3 in addition to the well‐separated peaks of Ti 3 C 2 in the hybrid electrode. This leads to a higher specific charge and a higher rate capability compared to a carbon and binder containing α‐MoO 3 electrode. These results demonstrate that the addition of MXene to less conductive oxides eliminates the need for conductive carbon additives and binders, leads to a larger amount of charge stored, and increases redox capacity at higher rates. In addition, MXene encapsulated α‐MoO 3 showed improved electrochemical stability, which was attributed to the suppressed dissolution of α‐MoO 3 . The work suggests that oxide/MXene hybrids are promising for energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fine-Tuning of Pt Dispersion on Al 2 O 3 and Understanding the Nature of Active Pt Sites for Efficient CO and NH 3 Oxidation Reactions

Fine-tuning the dispersion of active metal species on widely used supports is a research hotspot in the catalysis community, which is vital for achieving a balance between the atomic utilization efficiency and the intrinsic activity of active sites. In this work, using bayerite Al(OH) 3 as support directly or after precalcination at 200 or 550 °C, Pt/Al 2 O 3 catalysts with distinct Pt dispersions from single atoms to clusters (ca. 2 nm) were prepared and evaluated for CO and NH 3 removal. Richer surface hydroxyl groups on AlO x (OH) y support were proved to better facilitate the dispersion of Pt. However, Pt/Al 2 O 3 with relatively lower Pt dispersion could exhibit better activity in CO/NH 3 oxidation reactions. Further reaction mechanism study revealed that the Pt sites on Pt/Al 2 O 3 with lower Pt dispersion could be activated to Pt 0 species much easier under the CO oxidation condition, on which a higher CO adsorption capacity and more efficient O 2 activation were achieved simultaneously. Compared to Pt single atoms, PtO x clusters could also better activate NH 3 into –NH 2 and –HNO species. The higher CO adsorption capacity and the more efficient NH 3 /O 2 activation ability on Pt/Al 2 O 3 with relatively lower Pt dispersion well explained its higher CO/NH 3 oxidation activity. This study emphasizes the importance of avoiding a singular pursuit of single-atom catalyst synthesis and instead focusing on achieving the most effective Pt species on Al 2 O 3 support for targeted reactions. Finally, this approach avoids unnecessary limitations and enables a more practical and efficient strategy for Pt catalyst fabrication in emission control applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fabrication of α-Fe 2 O 3 Nanoparticles/g-C 3 N 4 Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

The fabrication of a nanohybrid photocatalyst that combines α-Fe 2 O 3 nanoparticles with graphitic carbon nitride (g-C 3 N 4 ) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe 2 O 3 /g-C 3 N 4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe 2 O 3 and g-C 3 N 4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe 2 O 3 nanoparticles on g-C 3 N 4 . A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe–N and C–N/C–O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe 2 O 3 nanoparticles on the g-C 3 N 4 sheets. Careful control of the FeCl 3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanistic studies of NH 3 -assisted reduction of mononuclear Cu(ii) cation sites in Cu-CHA zeolites

Cu-Exchanged zeolites catalyze various redox reactions including the selective catalytic reduction (SCR) of NO x with NH 3 and the partial oxidation of hydrocarbons. The reduction of Cu(II) cations to Cu(I) by NH 3 alone has been observed experimentally, yet fundamental details regarding the Cu active site requirements, reaction stoichiometry, and reaction mechanism remain incompletely understood. Here, we synthesized model Cu-exchanged chabazite (Cu-CHA) zeolites with varying Cu ion densities and distributions of mononuclear Cu(II) ion site types (Cu 2+ , (CuOH) + ) and studied NH 3 -assisted Cu(II) reduction reactions using a combination of spectroscopic, titrimetric, and gas-phase product analysis methods. In situ UV-visible and X-ray absorption spectroscopies were used to monitor and quantify the transient reduction of Cu(II) to Cu(I) during exposure to NH 3 (473 K), in concert with titration methods that use NO and NH 3 co-reductants to fully reduce to the Cu(I) state any residual Cu(II) ions that remained after treatments in NH 3 alone for a given time period. The techniques provide quantitative evidence that both mononuclear Cu(II) site types are able to reduce in NH 3 alone, and do so to similar extents as a function of time. NH 3 temperature programmed reduction (TPR) revealed that the reaction stoichiometry of NH 3 -assisted reduction forms approximately one equivalent of N 2 per 6 Cu sites, regardless of Cu speciation or density, consistent with a six-electron reduction process whereby two NH 3 molecules react with six Cu(II) species to produce one N 2 molecule and six Cu(I) species. Furthermore, these findings provide new insights into the reaction pathways and mechanisms by which NH 3 alone reduces mononuclear Cu(II) sites in zeolites, which are undesired side-reactions that occur during steady-state NO x SCR and can unintentionally influence SCR-relevant spectroscopic or titrimetric characterization experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

CO 2 methanation reaction pathways over unpromoted and NaNO 3 -promoted Ru/Al 2 O 3 catalysts

Catalytic CO 2 sorbents, materials that adsorb and pre-concentrate CO 2 on the catalyst surface prior to subsequent conversion, are becoming important materials in CO 2 capture and utilization. In this work, a prototypical CO 2 methanation catalyst – Ru/Al 2 O 3 – and a related catalytic sorbent – NaNO 3 /Ru/Al 2 O 3 – are used for CO 2 methanation in flowing hydrogen in a fixed bed reactor at temperatures ranging from 220 to 280 °C. Activation energies for the NaNO 3 /Ru/Al 2 O 3 material are slightly higher than unpromoted Ru/Al 2 O 3 catalysts, and the reaction orders vary more significantly. In situ IR spectroscopy and steady-state isotopic kinetic analysis (SSITKA) using in situ IR/MS spectroscopy show that bicarbonate and linear carbonyl species are the likely reaction intermediates over unpromoted Ru/Al 2 O 3 , while bidentate carbonate, formate and linear carbonyl species are among likely reaction intermediates over NaNO 3 /Ru/Al 2 O 3 . Rate laws consistent with the obtained experimental data are proposed after kinetic modeling of multiple plausible reaction pathways. In conclusion, results suggest that the pathway over the NaNO 3 /Ru/Al 2 O 3 catalyst likely has an additional kinetically relevant irreversible step in the CO 2 methanation reaction pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In situ Study on the Evolution of Atomic and Electronic Structure of LaTiO 3 /SrTiO 3 System

As with other transition-metal oxide interfaces, LaTiO 3 /SrTiO 3 interfaces exhibit interesting electronic properties, such as a two-dimensional electron gas. While the available Mott states and multiple pathways to metallicity in LaTiO 3 can lead to a variety of applications in oxide electronics, the origin of the different properties remains uncertain. Herein, utilizing real-time, in situ x-ray diffraction at the synchrotron, robust but thin LaTiO 3 /SrTiO 3 heterostructures were fabricated using oxide molecular beam epitaxy. A thickness of six unit cells was determined to be critical, at which point the LaTiO 3 /SrTiO 3 heterostructures begin to sustain sharp, well-defined interfaces. The layers of LaTiO 3 and SrTiO 3 were sufficiently thin to benefit from the finite escape length of electrons at resonant soft x-ray photoemission, and the heterostructures were transferred in vacuo after growth to another chamber for synchrotron-based x-ray photoemission spectroscopy studies. With the x-ray energy tuned to the Ti-2p resonance, the LaTiO 3 /SrTiO 3 interfaces could be probed with enough penetration depth and selectivity. It is shown that all of the heterointerfaces exhibit the two-dimensional electron gas.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Highly selective Si 3 N 4 /SiO 2 etching using an NF 3 /N 2 /O 2 /H 2 remote plasma. I. Plasma source and critical fluxes

Highly selective plasma etching of silicon nitride (Si 3 N 4 ), while not etching silicon dioxide (SiO 2 ), is a critical step in the fabrication of microelectronics devices. In many applications, this etching must be damage-free and isotropic, which then motivates the use of remote plasmas where the reactants interacting with the substrate are dominantly neutral species. In this paper and Paper II, mechanisms for highly selective Si 3 N 4 etching in remote plasmas are discussed based on results from experiments and simulations. It has been shown experimentally that high Si 3 N 4 /SiO 2 etch selectivity (≈380) can be achieved in the downstream effluent of an NF 3 /N 2 /O 2 /H 2 plasma. The authors found that H2 plays a principal role in the reaction mechanism as Si 3 N 4 /SiO 2 selectivity shows a sharp maximum as a function of the H2 flow rate. Based on this observation, and measured densities of F-atoms and H2 in the process chamber, a mechanism of selective Si 3 N 4 /SiO 2 etching is proposed in which HF molecules in vibrationally excited states accelerate etching reactions. A reaction mechanism for NF 3 /N 2 /O 2 /H 2 plasmas and its afterglow was developed to computationally determine the species densities and fluxes on the wafer level, validated by comparing with experimentally measured F-atom and H 2 densities. The calculated species densities and fluxes were used as input to an analytical model of Si 3 N 4 and SiO 2 etching based on the results of quantum chemistry simulations. This paper presents experimental results (etching data and species densities), the reaction mechanism for NF 3 /N 2 /O 2 /H 2 plasmas, and the results of simulations of gas phase chemistry. Quantum chemistry simulations of elementary etching reactions, description of the analytical model of Si 3 N 4 and SiO 2 etching, calculations of the etch rates, and Si 3 N 4 and SiO 2 selectivity with this model are presented in Paper II.

42 ENGINEERING↗
DOE OSTI2020

Temperature-dependent Battery Performance of a Na 3 V 2 (PO 4 ) 2 F 3 @MWCNT Cathode and In-situ Heat Generation on Cycling

Excellent structural stability, high operating voltage, and high capacity have made Na 3 V 2 (PO 4 ) 2 F 3 a promising cathode material for sodium-ion batteries. However, high-temperature battery performances and heat generation measurements have not been systematically reported yet. Carbon-coated Na 3 V 2 (PO 4 ) 2 F 3 @MWCNT (multi-walled carbon nanotube) samples are fabricated by a hydrothermal-assisted sol-gel method and the electrochemical performances are evaluated at three different temperatures (25, 45, and 55 °C). Furthermore, the well-crystallized Na 3 V 2 (PO 4 ) 2 F 3 @MWCNT samples exhibit good cycling stability at both low and high temperatures; they deliver an initial discharge capacity of 120–125 mAhg -1 at a 1 C rate with a retention of 53 % capacity after 1,400 cycles with 99 % columbic efficiency. The half-cell delivers a capacity of 100 mAhg -1 even at a high rate of 10 C at room temperature. Furthermore, the Na 3 V 2 (PO 4 ) 2 F 3 @MWCNT samples show good long-term durability; the capacity loss is an average of 0.05 % per cycle at a 1 C rate at 55 °C. Additionally, ionic diffusivity and charge transfer resistance are evaluated as functions of state of charge, and they explain the high electrochemical performance of the Na 3 V 2 (PO 4 ) 2 F 3 @MWCNT samples. In-situ heat generation measurements reveal reversible results upon cycling owing to the high structural stability of the material. Excellent electrochemical performances are also demonstrated in the full-cell configuration with hard carbon as well as antimony Sb/C anodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Corrosion of Al 2 O 3 /Cr and Ti 2 O 3 /Cr composites in flowing air and CO 2 at 750°C

Hot-pressed Al 2 O 3 /Cr and Ti 2 O 3 /Cr composites were exposed to synthetic air or CO 2 at 750 °C. The Al 2 O 3 /Cr composites formed external Cr 2 O 3 scales, and exhibited slow parabolic oxidation kinetics, in both gases. The Cr 2 O 3 scales formed in CO 2 possessed finer grains, and thickened at a faster rate, than Cr 2 O 3 scales formed in air. The Ti 2 O 3 /Cr composites formed thick external TiO 2 scales with internal oxidation zones that also contained Cr 2 O 3 scales on subsurface Cr grains. After 20 h at 750 °C, the Ti 2 O 3 /Cr composites exhibited parabolic oxidation kinetics in both gases, although the oxidation rates were significantly higher than for the Al 2 O 3 /Cr composites.

36 MATERIALS SCIENCE↗
DOE OSTI2020

NASICON Na 3 V 2 (PO 4 ) 3 Enables Quasi-Two-Stage Na + and Zn 2+ Intercalation for Multivalent Zinc Batteries

Identifying positive electrode materials capable of reversible multivalent electrochemistry in electrolytes containing divalent ions such as Mg 2+ , Ca 2+ , and Zn 2+ at high operating potentials remains an ongoing challenge in “beyond lithium-ion” research. In this paper, we explore the Zn 2+ charge-storage mechanism of a vanadium-based Na + superionic conductor (NASICON), Na 3 V 2 (PO 4 ) 3 . By using X-ray synchrotron techniques to unravel potential-dependent structure–property relationships, we ascribe the reversible electrochemical behavior of Na 3 V 2 (PO 4 ) 3 to a quasi-two-stage intercalation process that involves both Na+ and Zn 2+ . Initial charging of Na 3 V 2 (PO 4 ) 3 leads to a Na + -extracted phase corresponding to Na 3 V 2 (PO 4 ) 3 , whereas subsequent discharge results predominantly in Na + intercalation followed by Zn 2+ intercalation. Operando X-ray diffraction of Na 3 V 2 (PO 4 ) 3 was used to study the phase changes associated with the first charge/discharge process, and ex situ measurements were used to precisely link the changes in the crystal structure to a quasi-two-stage intercalation of Na + and Zn 2+ . The corresponding changes in the V-oxidation state, V-O coordination, and the presence of Zn 2+ were confirmed by X-ray absorption spectroscopy. The results of this work present a comprehensive understanding of the charge-storage properties for a well-established NASICON structure that confers both the high capacity (~100 mA h g -1 ) and high potential (1.35 and 1.1 V vs Zn/Zn 2+ ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enumeration as a Tool for Structure Solution: A Materials Genomic Approach to Solving the Cation-Ordered Structure of Na 3 V 2 (PO 4 ) 2 F 3

While powder diffraction methods are routinely utilized to optimize structural models for compounds whose crystal structures are known, the determination of unknown structures is far more challenging. When the unknown structure is large, structure solution can become a virtually intractable problem using standard structure solution methodologies, especially when the space group cannot be unambiguously resolved. One such system is the promising Na-ion battery cathode material Na 3 V 2 (PO 4 ) 2 F 3 whose high temperature and room temperature structures were previously solved, but whose more complex low-temperature structure could not be determined. Here, a novel materials genomic approach is demonstrated for the solution of the unknown 100 K structure of Na 3 V 2 (PO 4 ) 2 F 3 in which enumeration methods are first used to generate a large number (~3,000) of trial structures based on plausible orderings of Na ions and then automated Rietveld refinements are carried out to optimize each of these trial structures. Based on both the analysis of the ensemble of optimized trial structures and the density functional theory energy minimization of selected trial structures, the 100 K structure of Na 3 V 2 (PO 4 ) 2 F 3 is best described as belonging to the space group A2 1 am with unit cell dimensions of a = 9.01928(4), b = 27.1379(1), c = 10.73307(5). The 100 K unit cell has a large volume of 2627.07(2) Å 3 with Z = 12 and 33 independent crystallographic sites (9 Na, 3 V, 3 P, 12 O, and 6 F) that is 3x and 6x larger than the room- and high-temperature polymorphs of this phase, respectively. Finally, the novel methods described here will be generally applicable for the solution of the complex cation-ordered structures that commonly occur for battery materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

RbB 3 Si 3 : An Alkali Metal Borosilicide that is Metastable and Superconducting at 1 atm

The stability, electronic structure and potential superconductivity in AB 3 Si 3 (A = Na, K, Rb, and Cs) compounds that assume the clathrate-based sodalite structure whose frameworks consists of covalent B-Si bonds is investigated via first-principles calculations. This structure type has recently been predicted in a number of high temperature superconducting hydrides, but these are only stable under megabar pressures. Herein, we predict a novel superconducting phase, RbB 3 Si 3 , that could be synthesized under pressures that are a factor of ten smaller, ~10 GPa, and quenched to atmospheric conditions. Electron-phonon coupling calculations predict that RbB 3 Si 3 possesses a superconducting critical temperature, T c , of 14 K at 1 atm. Here, the dynamic stability of RbB 3 Si 3 and CsB 3 Si 3 at ambient pressure can be explained by considering the chemical pressure exerted on the B-Si framework that is caused by the size effect of the alkali metal atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tea ( Camellia sinensis ) Extract-Mediated Green Synthesis of Co 3 O 4 and Co 3 O 4 @Graphene Nanocomposites for Multifunctional Applications in Pollutant Degradation, Sensing, and Energy Storage

A novel solution-mixing method was proposed to synthesize Co 3 O 4 /graphene nanocomposites (Co 3 O 4 @Gr) using a green tea leaf (Camellia sinensis) extract as the reducing agent. XRD analysis shows that the as-prepared Co 3 O 4 @Gr exhibits a cubic spinel crystal structure. From morphological analysis, the obtained Co 3 O 4 NS forms spherical clusters that are uniformly distributed on the graphene surface. FT-IR and Raman analyses confirmed the strong molecular and vibrational interactions between the Co 3 O 4 NS and Gr. The suppressed PL intensity peak of the Co 3 O 4 @Gr NCs indicated significant inhibition in the recombination of charge carriers between the hybrid orbitals within the composites. As a result, the catalytic efficiency of Co 3 O 4 @Gr NCs increased to 80% compared to pristine Co 3 O 4 , which exhibited only 45% efficiency against methylene blue (MB) dye. Moreover, the as-prepared NCs exhibited a detection limit of 0.01−224 μM, demonstrating a superior low-DPA detection with high sensitivity. The Co 3 O 4 @Gr/GCE exhibits admirable selectivity for various pesticides, fungicides, and metal ions, with outstanding reproducibility and stability. From electrochemical investigations, the highest specific capacitance values of the as-synthesized Co 3 O 4 @Gr were 349 F/g at a scan rate of 5 mV/s and 158 F/g at a current density of 1 A/g.

Capacitors↗
DOE OSTI2023

Atomic Structural Origin of the High Methanol Selectivity over In 2 O 3 –Metal Interfaces: Metal–Support Interactions and the Formation of a InO x Overlayer in Ru/In 2 O 3 Catalysts during CO 2 Hydrogenation

CO 2 hydrogenation to methanol is of great environmental and economic interest due to its potential to reduce carbon emissions and produce valuable chemicals in one single reaction. Compared with the unmodified traditional Cu/ZnO/Al 2 O 3 catalyst, an indium oxide (In 2 O 3 )-based catalyst can double the methanol selectivity from 30–50 to 60–100%. It is worth noting that over catalysts involving various active metals dispersed on indium oxide (M/In 2 O 3 , M = Pd, Ni, Au, etc.), although the methanol yield is boosted, the selectivity remains similar to that of plain In 2 O 3 despite the distinct chemical properties of the added metals. Here, to investigate the phenomena behind this behavior, we used RuO 2 /In 2 O 3 as a test catalyst. The results of ambient pressure photoelectron spectroscopy, in situ X-ray absorption fine structure, and time-resolved X-ray diffraction indicate that the structure of the RuO 2 /In 2 O 3 catalyst is highly dynamic in the presence of a reactive environment. Specifically, under CO 2 hydrogenation conditions, Ru clusters facilitate the reduction of In 2 O 3 to generate In 2 O 3–x aggregates, which encapsulate the Ru systems in a migration driven by thermodynamics. In this way, the Ru O sites for CH 4 production are blocked while creating RuO x –In 2 O 3–x interfacial sites with tunable metal–oxide interactions for selective methanol production. In an inverse oxide/metal configuration, indium oxide has properties not seen in its bulk phase that are useful for the binding and conversion of CO 2 . This work reveals the dynamic nature of In 2 O 3 -based catalysts, providing insights for a rational design of materials for the selective synthesis of methanol.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-Field One-Dimensional and Two-Dimensional 27Al Magic-Angle Spinning Nuclear Magnetic Resonance Study of ?-, d-, and ?-Al2O3 Dominated Aluminum Oxides: Toward Understanding the Al Sites in ?-Al2O3

Herein, a detailed analysis was carried out using high-field (19.9 T) 27Al magic-angle spinning (MAS) nuclear magnetic resonance (NMR) on three specially prepared aluminum oxide samples where the ?-, d-, and ?-Al2O3 phases are dominantly expressed through careful control of the synthesis conditions. Specifically, two-dimensional (2D) multiquantum (MQ) MAS 27Al was used to obtain high spectral resolution, which provided a guide for analyzing quantitative 1D 27Al NMR spectra. Six aluminum sites were resolved in the 2D MQ MAS NMR spectra, and seven aluminum sites were required to fit the 1D spectra. A set of octahedral and tetrahedral peaks with well-defined quadrupolar line shapes was observed in the ?-phase dominant sample and was unambiguously assigned to the ?-Al2O3 phase. The distinct line shapes related to the ?-Al2O3 phase provided an opportunity for effectively deconvoluting the more complex spectrum obtained from the d-Al2O3 dominant sample, allowing the peaks/quadrupolar parameters related to the d-Al2O3 phase to be extracted. The results show that the d-Al2O3 phase contains three distinct AlO sites and three distinct AlT sites. This detailed Al site structural information offers a powerful way of analyzing the most complex ?-Al2O3 spectrum. It is found that the ?-Al2O3 phase consists of Al sites with local structures similar to those found in the d-Al2O3 and ?-Al2O3 phases albeit with less ordering. Spin–lattice relaxation time measurement further confirms the disordering of the lattice. Collectively, this study uniquely assigns 27Al features in transition aluminas, offering a simplified method to quantify complex mixtures of aluminum sites in transition alumina samples.

Xu, Suochang↗
DOE OSTI2022

Gas-Phase Formation of 1,3,5,7-Cyclooctatetraene (C 8 H 8 ) through Ring Expansion via the Aromatic 1,3,5-Cyclooctatrien-7-yl Radical (C 8 H 9 • ) Transient

Gas-phase 1,3,5,7-cyclooctatetraene (C 8 H 8 ) and triplet aromatic 1,3,5,7-cyclooctatetraene (C 8 H 8 ) were formed for the first time through the bimolecular methylidyne radicals (CH) - 1,3,5-cycloheptatriene (C 7 H 8 ) reactions under single collision conditions on the doublet surface. The reaction involves methylidyne radical addition to the olefinic pi electron system of 1,3,5-cycloheptatriene followed by isomerization and ring expansion to aromatic 1,3,5-cyclooctatrien-7-yl radical (C 8 H 9 •). The chemically activated doublet radical intermediate undergoes unimolecular decomposition to 1,3,5,7-cyclooctatetraene. Substituted 1,3,5,7-cyclooctatetraene molecules can be prepared in the gas phase with hydrogen atom(s) in the 1,3,5-cycloheptatriene reactant being replaced by organic side groups. Furthermore, these findings are also of potential interest to organometallic chemists by expanding the synthesis of exotic transition metal complexes incorporating substituted 1,3,5,7-cyclooctatetraene dianion (C 8 H 8 2- ) ligands and to untangle the unimolecular decomposition of chemically activated and substituted 1,3,5-cyclooctatrien-7-yl radical eventually gaining a fundamental insight of their bonding chemistry, electronic structures, and stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Au 3 -to-Ag 3 coordinate-covalent bonding and other supramolecular interactions with covalent bonding strength

An efficient strategy for designing charge-transfer complexes using coinage metal cyclic trinuclear complexes (CTCs) is described herein. Due to opposite quadrupolar electrostatic contributions from metal ions and ligand substituents, [Au(m-Pz-(i-C 3 H7) 2 )] 3 ∙[Ag(m-Tz-(n-C 3 F 7 ) 2 )] 3 (Pz = pyrazolate, Tz = triazolate) has been obtained and its structure verified by single crystal X-ray diffraction – representing the 1st crystallographically-verified M 3 @M' 3 stacked adduct of monovalent coinage metal CTCs. Abundant supramolecular interactions with aggregate covalent bonding strength arise from a combination of M–M' (Au / Ag), metal–π, π–π interactions and hydrogen bonding in this charge-transfer complex, according to density functional theory analyses, yielding a computed binding energy of 66 kcal mol -1 between the two trimer moieties – a large value for intermolecular interactions between adjacent d 10 centres (nearly doubling the value for a recently claimed Au(I) / Cu(I) polar-covalent bond: Proc. Natl. Acad. Sci. U.S.A., 2017, 114, E5042) – which becomes 87 kcal mol -1 with benzene stacking. Surprisingly, DFT analysis suggests that: (a) some other literature precedents should have attained a stacked M 3 @M' 3 product akin to the one herein, with similar or even higher binding energy; and (b) a high overall intertrimer bonding energy by inferior electrostatic assistance, underscoring genuine orbital overlap between M and M' frontier molecular orbitals in such polar-covalent M–M' bonds in this family of molecules. The Au / Ag bonding is reminiscent of classical Werner-type coordinate-covalent bonds such as H 3 N: → Ag in [Ag(NH 3 ) 2 ] + , as demonstrated herein quantitatively. Solidstate and molecular modeling illustrate electron flow from the p-basic gold trimer to the p-acidic silver trimer with augmented contributions from ligand-to-ligand’ (LL'CT) and metal-to-ligand (MLCT) charge transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗