Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Syngas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Development and Experimental Validation of Large Eddy Simulation Techniques for the Prediction of Combustion-Dynamic Process in Syngas Combustion: Characterization of Autoignition, Flashback, and Flame-Liftoff at Gas-Turbine Relevant Operating Conditions

The objective of this closely coordinated experimental and computational research effort is the development of simulation techniques for the prediction of combustion processes, relevant to the oxidation of syngas and high hydrogen content (HHC) fuels at gas-turbine relevant operating conditions. Specifically, the research goals are (i) the characterization of the sensitivity of syngas ignition processes to hydrodynamic processes and perturbations in temperature and mixture composition in rapid compression machines and ow-reactors and (ii) to conduct comprehensive experimental investigations in a swirl-stabilized gas turbine (GT) combustor under realistic high-pressure operating conditions in order (iii) to obtain fundamental understanding about mechanisms controlling unstable flame regimes in HHC-combustion.

10 SYNTHETIC FUELS↗

Advanced Syngas Cleanup Using Radically Engineered Modular Systems

The overall objective of this project was to address key knowledge gaps and develop modular sorbent-based warm syngas cleanup designs that will enable 1- to 5-MW REMS-based plants to be cost-competitive with large state-of-the-art commercial plants utilizing all of our abundant domestic coal reserves. We proposed to develop two potential new desulfurization process designs specifically targeted for REMS plants for combined heat and power or polygeneration from coal gasification. The first design is a modification of our commercially offered dual transport reactor design based Warm-gas Desulfurization Process (WDP) where the transport-reactor regenerator is replaced with a fluidized-bed regenerator. This design leverages the learnings obtained from our pre-commercial demonstration testing of the WDP technology for over 3,000 hours and conclusions from the lessons learned workshop. The second design is a fixed-bed process that leverages the successful composition and chemistry of our WDP sorbent to develop an effective fixed-bed sorbent formulation and fixed-bed process design. These two potential desulfurization process designs have a strong technical likelihood of success and offer the best opportunity to effectively employ design standardization, mass production and advanced manufacturing techniques to enable cost competitiveness for syngas cleanup at smaller scale.

01 COAL, LIGNITE, AND PEAT↗

Conversion of Syngas and CO2 to Light Olefins using Multi-Functional Catalysts

This report describes our effort in developing a novel zeolite encapsulated metal nanoparticle catalyst for the conversion of syngas to light olefins. We have adopted a ligand assisted synthesis protocol in which first metal-amine was prepared using metal salts and suitable amine ligands. The stable metal-amine complex thus prepared was then used as the seed for the growth of zeolite in alkaline solution. We have optimized the synthesis condition as well as different amine ligand to identify the condition to obtain stable metal-amine complex. Upon synthesis of zeolite, metal particles are encapsulated inside the zeolite in a confined space. We have synthesized both Fe and Co catalyst inside silicalite and chabazite zeolite. Catalytic activity of these catalysts were evaluated for syngas conversion reaction and compared with a baseline catalyst. The activity trend of zeolite encapsulated catalyst show very different activity trend compared to the baseline catalyst. While a distribution of products with different carbon number was obtained with baseline catalyst, zeolite encapsulated catalyst show ethylene as the major product. While ~73% selectivity to C 2 -C 6 products were obtained with cahabazite encapsulated Fe catalyst, only 53% selectivity was obtained for the corresponding products with silica-alumina supported Fe catalyst. Not only higher selectivity, Fe-chabazite also produces only C 2 products (ethylene/ethane) while a distribution of products was obtained with Fe-SiAl catalyst. The significantly different reactivity associated with the chabazite encapsulated Fe catalyst was attributed to the confinement effect. We hypothesized that due to the small size of the pore, only ethylene was obtained as the product.

10 SYNTHETIC FUELS↗

Direct conversion of syngas to lower olefins precursors of jet fuel and chemicals

This study investigates the direct conversion of syngas to olefins as a pathway to produce sustainable aviation fuels. This approach combines methanol/ dimethyl ether synthesis with methanol-to-olefins into one unit operation to avoid the equilibrium limitation of methanol synthesis and the Anderson–Schulz–Flory distribution limitations from the Fischer Tropsch process. The ability to combine reactor functionalities into a single step are also projected to significantly lower capital costs over current synthesis approaches for the syngas to olefins process.

10 SYNTHETIC FUELS↗

Microwave-Assisted Gasification of Biochar: Effect of Operational Parameters and Biochar Composition on Syngas Production

The utilization of microwave-assisted gasification for biomass/plastic is a promising route toward clean energy production, contributing to a reduction in carbon footprint. This method facilitates the conversion of biomass into syngas with enhanced hydrogen (H2) yield, surpassing conventional heating approaches. However, the gasification of biochar, a byproduct resulting from the initial rapid pyrolysis of biomass, appears as a rate-determining step in biomass gasification. To ensure high conversion efficiency, particularly in pilot or larger scales, the maintenance of high biochar reactivity is essential, which can be achieved by introducing catalysts to minimize biochar formation. Furthermore, given the susceptibility of biochar to microwave heating, gaining a comprehensive understanding of its behavior in the presence of microwave-active catalysts under microwave conditions is crucial to obtain valuable insights into the underlying mechanisms, thereby improving overall biomass gasification efficiency. In the previous study, magnetite (Fe3O4) was selected for microwave-assisted gasification for biomass/plastic due to its dual role as a catalyst and microwave absorber and demonstrated considerably enhanced hydrogen production. Herein, Fe3O4 is rationally modified with metal promoters and their synergistic effect toward biochar gasification performance is investigated. The data shows that metal promoted Fe3O4 shows a higher syngas yield than that of pristine Fe3O4 in biochar.

Mai, Duy Hien↗

Evaluation of syngas production unit cost of bio-gasification facility using regression analysis techniques

Evaluation of economic feasibility of a bio-gasification facility needs understanding of its unit cost under different production capacities. The objective of this study was to evaluate the unit cost of syngas production at capacities from 60 through 1800Nm 3/h using an economic model with three regression analysis techniques (simple regression, reciprocal regression, and log-log regression). The preliminary result of this study showed that reciprocal regression analysis technique had the best fit curve between per unit cost and production capacity, with sum of error squares (SES) lower than 0.001 and coefficient of determination of (R 2) 0.996. The regression analysis techniques determined the minimum unit cost of syngas production for micro-scale bio-gasification facilities of $0.052/Nm 3, under the capacity of 2,880 Nm 3/h. The results of this study suggest that to reduce cost, facilities should run at a high production capacity. In addition, the contribution of this technique could be the new categorical criterion to evaluate micro-scale bio-gasification facility from the perspective of economic analysis.

Bio-gasification↗

Dimethyl ether production from methanol and/or syngas

Disclosed are methods for producing dimethyl ether (DME) from methanol and for producing DME directly from syngas, such as syngas from biomass. Also disclosed are apparatus for DME production. The disclosed processes generally function at higher temperatures with lower contact times and at lower pressures than conventional processes so as to produce higher DME yields than do conventional processes. Certain embodiments of the processes are carried out in reactors providing greater surface to volume ratios than the presently used DME reactors. Certain embodiments of the processes are carried out in systems comprising multiple microchannel reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Pressure Turbulent Flame Speeds and Chemical Kinetics of Syngas Blends with and without Impurities

This Topical Report documents the first year of the project, from October 1, 2013 through September 30, 2014. Efforts for this project included experiments to characterize the atmospheric-pressure turbulent flame speed vessel over a range of operating conditions (fan speeds and turbulent length scales). To this end, a new LDV system was acquired and set up for the detailed characterization of the turbulence field. Much progress was made in the area of impurity kinetics, which included a numerical study of the effect of impurities such as NO2, NO, H2S, and NH3 on ignition delay times and laminar flame speeds of syngas blends at engine conditions. Experiments included a series of laminar flame speed measurements for syngas (CO/H2) blends with various levels of CH4 and C2H6 addition, and the results were compared to the chemical kinetics model of NUI Galway. Also, a final NOx kinetics mechanism including ammonia was assembled, and a journal paper was written and is now in press. Overall, three journal papers and six conference papers related to this project were published this year. Finally, much progress was made on the design of the new high-pressure turbulent flame speed facility. An overall design that includes a venting system was decided upon, and the detailed design is in progress.

Peterson, Eric↗

Methods and systems for syngas production and for efficient, flexible energy generation

Methods for producing syngas (e.g., H2 and CO) include introducing a stream comprising H2O and CO2 to a high-temperature co-electrolysis (HTCE) unit. A CO2 sweep gas is also introduced to the HTCE unit. Both H2O and CO2 are reduced in the HTCE unit to form the syngas and to form O2 that is swept away from the HTCE unit by the CO2 sweep gas, and the O2 and CO2 are then introduced to a combustion device (e.g., a gasifier), which may be configured to generate electrical power, as a result of combusting a carbonaceous fuel in the presence of the O2 and CO2. The HTCE unit is powered at least in part by power from an electricity-generating sub-system (e.g., at least one nuclear power plant). Related systems are also disclosed.

O'Brien, James E.↗

Microwave-Assisted Syngas Cleanup: Catalytic Reforming of Gasifier Tar Using a Low-Cost Iron Catalyst

The microwave-assisted gasification of plastic wastes to produce hydrogen-rich syngas is an attractive energy-saving plastic upcycling route, and the addition of biomass could improve the quality of the syngas produced; however, it could also increase the tar yield, which is an undesired, secondary product in this process. The presence of tars could result in downstream lines blockage, reactor down time and costly maintenance. Therefore, reducing or removing tar is desired. Due to its chemical complexity, toluene, which is one of the main tar constituents, could be used as a model tar compound. In this work, the microwave-assisted catalytic dry reforming of toluene was studied using Fe/Al2O3 as a catalyst, under CO2 at different reaction temperatures. The toluene reforming reaction was conducted using microwave and conventional thermal reactors. The results showed that under microwave irradiation, higher CO2 and toluene conversions, as well as better hydrogen yield can be observed compared to conventional toluene reforming at the same reaction temperature. The catalyst stability test was also investigated. Three reaction pathways were observed during microwave reaction.

Bai, Xinwei↗

TiO 2 Supported gold–palladium catalyst for effective syngas production from methane partial oxidation

The CO and H 2 (syngas) production from methane partial oxidation (MPO) using TiO 2 supported Au-Pd bimetallic catalysts are discussed. The supported Au, Pd and Au-Pd bimetallic nanoparticles were prepared by an incipient wetness impregnation or co-impregnation method and were characterized. The supported Au-Pd catalyst was selective for reforming and was more active compared to bare TiO 2 , TiO 2 supported Au only, or Pd only catalysts. The catalyst properties before and after MPO reaction were investigated, including the stability of the TiO 2 support, and the stability of Au and Pd nanoparticles. The supported Au-Pd catalyst has the highest TON (TON H2 = 23 at 650 °C), compared to supported Au catalyst (TON H2 < 1) and supported Pd catalyst (TON H2 < 1). Based on the analysis of outlet gases from the MPO reaction in a flow reactor, synergetic effects between Au and Pd, where Pd activates CH bonds while gold modulates the behavior of oxygen at the catalyst surface, are shown to contribute to MPO. Additionally, the Au-Pd/TiO 2 material shows long-term activity (>12 h) for the MPO reaction at 600 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syngas formation in methane flames and carbon monoxide release during quenching

Following a recent investigation into chemi-ionization and chemiluminescence during gradual aeration of small, laminar methane flames, we proposed that partial oxidation products, or syngas constituents, formed in the pre-flame zone well below the luminous region, were responsible for the observed effects. We therefore map temperature, CO, and H{sub 2} for geometries and conditions relevant to burners in domestic boiler systems, to assess the potential hazard of CO release into the ambient atmosphere, should any partial quenching occur. CO concentrations peaks of 5.5 volume % are recorded in the core surrounding the axis. Appreciable CO concentrations are also found in the absence of added air. Experiments on various burner port geometries and temperatures suggest that this is not due to air entrainment at the flame base but to diffusion from zones closer to the flame. Next, quenching surfaces such as grids, perforated plates and flame trap matrices of different metals are progressively lowered into the flame. To avoid flow line distortion, suction aspirates the quenched products. The highest emission rate occurs with the quenching plane some 4 mm above the burner; further lowering of the quenching surface causes flame extinction. The maximum CO release is close to converting 10% of the CH{sub 4} feed, with some variation with quenching material. Expressing this potential release in terms of, e.g. boiler power, predicts a potentially serious hazard. Results of numerical simulations adequately parallel the experimental sampling profiles and provide insights into local concentrations, as well as the spatially resolved CO flux, which is calculated for a parabolic inlet flow profile. Integration across the stream implies, on the basis of the simulation, a possible tripling of the experimental CO release, were quenching simply to release the local gas composition into the atmosphere. Comparison with experiment suggests some chemical interaction with the quenching surface. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HIGH-TEMPERATURE ELECTROLYSIS FOR LARGE-SCALE HYDROGEN AND SYNGAS PRODUCTION FROM NUCLEAR ENERGY – SYSTEM SIMULATION AND ECONOMICS

A research and development program is under way at the Idaho National Laboratory (INL) to assess the technological and scale-up issues associated with the implementation of solid-oxide electrolysis cell technology for efficient high-temperature hydrogen production from steam. This work is supported by the US Department of Energy, Office of Nuclear Energy, under the Nuclear Hydrogen Initiative. This paper will provide an overview of large-scale system modeling results and economic analyses that have been completed to date. System analysis results have been obtained using the commercial code UniSim, augmented with a custom high-temperature electrolyzer module. Economic analysis results were based on the DOE H2A analysis methodology. The process flow diagrams for the system simulations include an advanced nuclear reactor as a source of high-temperature process heat, a power cycle and a coupled steam electrolysis loop. Several reactor types and power cycles have been considered, over a range of reactor outlet temperatures. Pure steam electrolysis for hydrogen production as well as coelectrolysis for syngas production from steam/carbon dioxide mixtures have both been considered. In addition, the feasibility of coupling the high-temperature electrolysis process to biomass and coal-based synthetic fuels production has been considered. These simulations demonstrate that the addition of supplementary nuclear hydrogen to synthetic fuels production from any carbon source minimizes emissions of carbon dioxide during the production process.

01 COAL, LIGNITE, AND PEAT↗

An all-oxide electrolysis cells for syngas production with tunable H 2 /CO yield via co-electrolysis of H 2 O and CO 2

High-rate production of syngas with tunable H 2 /CO and coke-free operation is achieved in a solid-oxide electrolysis cell (SOEC). Prior to operation, controlled pre-reduction of La 0.7 Sr 0.3 Fe 0.9 Ni 0.1 O 3-δ (LSFNi) cathode is used to trigger the in-situ exsolution of Ni-Fe alloy nanoparticles with an average size of ~45 nm uniformly distributed and socketed on LSFNi backbone, enabling efficient co-electrolysis of H 2 O and CO 2 to H 2 and CO. At 1.5 V, the current density reaches ~1.0 A cm-2 at 750 °C and ~2.4 A cm -2 at 850 °C with near 100% Faradaic Efficiency. We demonstrate the feasibility of tuning the output H 2 /CO ratio by nearly two orders of magnitude (from ~0.1 to ~7) by manipulating H 2 O/CO 2 ratio of feed gas, operating temperature, and current density. Finally, stable operation for >100 h is obtained without evidence of carbon deposition, although high current density operation leads to observable deterioration of anode/electrolyte interface due to the rapid oxygen evolution.

25 ENERGY STORAGE↗

The promotional effects of cesium promoter on higher alcohol synthesis from syngas over cesium-promoted Cu/ZnO/Al2O3 catalysts

In this study, the promotional effects of cesium promoter on higher alcohol (C2+OH) synthesis from syngas over Cs-Cu/ZnO/Al2O3 catalysts were investigated using a combined experimental and theoretical density functional theory (DFT) calculation method. In the presence of cesium, the C2+OH productivity increases from 77.1 g•kgcat-1•h-1 to 157.3 g•kgcat-1•h-1 at 583 K due to the enhancement of the initial C–C bond formation. Detailed analysis of chain growth probabilities (CGPs) confirms that initial C–C bond formation is the rate-determining step in the temperature range of 543-583 K. Addition of cesium promoter significantly increases the productivities of 2-methyl-1-propanol, while the CGPs values (C3* to 2-methyl-C3*) is almost unaffected. With the assistance of cesium promoter, the CGPs of the initial C–C bond formation step (C1* to C2*) could be increased from 0.13 to 0.25 at 583 K. DFT calculations indicate that the initial C–C bond formation is mainly contributed by the HCO+HCO coupling reaction over the ZnCu(211) model surface. In the presence of the Cs2O, the stabilities of key reaction intermediates such as HCO and H2CO are enhanced which facilitates both HCO+HCO and HCO+H2CO coupling reaction steps with lower activation barriers over the Cs2O-ZnCu(211) surface. The promotional effects of cesium on the C2+OH productivity are also benefited from the competitive CH+HCO coupling reaction over CH hydrogenation that leads to lower alkane formation. In addition, Bader charge analysis suggests that the presence of cesium ions would facilitate the nucleophilic reaction between HCO and H2CO for initial C–C bond formation. This work was supported by the National Natural Science Foundation of China (No. 91545114 and No. 91545203). We appreciate the joint PhD scholarship support from the China Scholarship Council. The authors would also like to thank the support from Collaborative Innovation Center of Chemistry for Energy Materials (2011-iChEM). DM was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences. Computing time was granted by the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL). EMSL is a national scientific user facility located at Pacific Northwest National Laboratory (PNNL) and sponsored by DOE’s Office of Biological and Environmental Research. PNNL is a multiprogram national laboratory operated for DOE by Battelle Memorial Institute. We also appreciate the support from Sinochem Quanzhou Petrochemical Co. Ltd.

cesium↗

Conversion of Syngas-Derived C2+ Mixed Oxygenates to C3-C5 Olefins over ZnxZryOz Mixed Oxides Catalysts

In this study we report on a ZnxZryOz mixed oxide type catalyst capable of converting a syngas-derived C2+ mixed oxygenate feedstock to isobutene-rich olefins. Aqueous model feed comprising of ethanol, acetaldehyde, acetic acid, ethyl acetate, methanol, and propanol was used as representative liquid product derived from a Rh-based mixed oxygenate synthesis catalyst. Greater than 50% carbon yield to C3-C5 mixed olefins was demonstrated when operating at 400-450oC and 1 atm. In order to rationalize formation of the products observed feed components were individually evaluated. Major constituents of the feed mixture (ethanol, acetaldehyde, acetic acid, and ethyl acetate) were found to produce isobutene-rich olefins. C-C coupling was also demonstrated for propanol feedstock - a minor constituent of the mixed oxygenate feed - producing branched C6 olefins, revealing scalability to alcohols higher than ethanol following an analogous reaction pathway. Using ethanol and propanol feed mixtures, cross-coupling reactions produced mixtures of C4, C5, and C6 branched olefins. The presence of H2 in the feed was found to facilitate hydrogenation of the ketone intermediates, thus producing straight chain olefins as byproducts. While activity loss from coking is observed complete catalyst regeneration is achieved by employing mild oxidation. For conversion of the mixed oxygenate feed a Zr/Zn ratio of 2.5 and a reaction temperature of 450oC provides the best balance of stability, activity, and selectivity. X-ray diffraction and scanning transmission electron microscopy analysis reveals the presence of primarily cubic phase ZrO2 and a minor amount of the monoclinic phase, with ZnO being highly dispersed in the lattice. The presence of ZnO appears to stabilize the cubic phase resulting in less monoclinic phase as the ZnO concentration increases. Infrared spectroscopy shows the mixed oxide acid sites are characterized as primarily Lewis type acidity. The direct relationship between isobutene production and the ratio of basic/acidic sites was demonstrated. An optimized balance of active sites for isobutene production from acetone was obtained with a basic/acidic site ratio of ~2. This technology for the conversion of aqueous mixtures of C2+ mixed oxygenates provides significant advantages over other presently studied catalysts in that its unique properties permit the utilization of a variety of feeds in a consistently selective manner.

biomass, catalyst, mixed oxides, ethanol, acetic a↗

Catlas: an automated framework for catalyst discovery demonstrated for direct syngas conversion

Catalyst discovery is paramount to support access to energy and key chemical feedstocks in a post fossil fuel era. Exhaustive computational searches of large material design spaces using ab initio methods like density functional theory (DFT) are infeasible. We seek to explore large design spaces at relatively low computational cost by leveraging large, generalized, graph-based machine learning (ML) models, which are pretrained and therefore require no upfront data collection or training. We present Catlas, a framework that distributes and automates the generation of adsorbate-surface configurations and ML inference of DFT energies to achieve this goal. Catlas is open source, making ML assisted catalyst screenings easy and available to all. To demonstrate its efficacy, we use Catlas to explore catalyst candidates for the direct conversion of syngas to multi-carbon oxygenates. For this case study, we explore 947 stable/metastable binary, transition metal intermetallics as possible catalyst candidates. On this subset of materials, we are able to predict the adsorption energy of key descriptors, *CO and *OH, with good accuracy (0.16, 0.14 eV MAE, respectively). Using the projected selectivity towards C 2+ oxygenates from an existing microkinetic model, we identified 144 candidate materials. For 10 promising candidates, DFT calculations reveal a good correlation with our assessment using ML. Finally, among the top elemental combinations were Pt–Ti, Pd–V, Ni–Nb, and Ti–Zn, all of which appear unexplored experimentally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗