Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superconductive tunneling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multiband superconductivity in strongly hybridized 1 T ' - WTe 2 / NbSe 2 heterostructures

The interplay of topology and superconductivity has become a subject of intense research in condensed-matter physics for the pursuit of topologically nontrivial forms of superconducting pairing. An intrinsically normal-conducting material can inherit superconductivity via electrical contact to a parent superconductor via the proximity effect, usually understood as Andreev reflection at the interface between the distinct electronic structures of two separate conductors. However, at high interface transparency, strong coupling inevitably leads to changes in the band structure, locally, owing to hybridization of electronic states. Here, we investigate such strongly proximity-coupled heterostructures of monolayer $1T$' - $\mathrm{WTe_2}$ grown on NbSe 2 by van der Waals epitaxy. The superconducting local density of states, resolved in scanning tunneling spectroscopy down to 500 mK, reflects a hybrid electronic structure well described by a multiband framework based on the McMillan equations which captures the multiband superconductivity inherent to the NbSe 2 substrate and that is induced by proximity to $\mathrm{WTe_2}$ self-consistently. Our material-specific tight-binding model captures the hybridized heterostructure quantitatively and confirms that strong interlayer hopping gives rise to a semimetallic density of states in the two-dimensional $\mathrm{WTe_2}$ bulk, even for nominally band-insulating crystals. The model further accurately predicts the measured order parameter Δ ≅ 0.6 meV induced in the $\mathrm{WTe_2}$ monolayer bulk, stable beyond a 2 T magnetic field. So we believe that our detailed multiband analysis of the hybrid electronic structure provides a useful tool for sensitive spatial mapping of induced order parameters in proximitized atomically thin topological materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Fingerprinting Superconductors by Disentangling Andreev and Quasiparticle Currents Across Tunable Tunnel Junctions

Tunneling Andreev reflection (TAR) spectroscopy provides a new approach to identify superconducting pairing symmetry at the atomic scale. Using atomistic superconducting transport simulations, we reveal the mechanism by which TAR can distinguish between pairing symmetries, which is complementary to traditional conductance-based techniques. In particular, owing to the additivity of the excess tunneling decay rate, the TAR spectrum is a weighted average of the contributions from quasiparticle currents, Andreev reflection, and higher-order scattering processes, and their relative weights depend on both the superconducting order parameter and the coupling strength. Within the local tunneling model, TAR dominates mid-gap conductance for s-wave superconductors, is suppressed for d-wave, and coexists with quasiparticle tunneling in sign-changing symmetries if the expectation value for the superconducting gap remains finite. Meanwhile, higher-order processes generally enhance the TAR signal when GN exceeds approximately 0.1G0. As a result, TAR provides a rich spectral fingerprint of the underlying pairing symmetry and electronic structure, enabling atomically resolved identification of unconventional superconducting states.

Maksymovych, Petro [Clemson University]↗
DOE OSTI2021

Strong-coupling anisotropic s-wave superconductivity in the type-II Weyl semimetal TaIrTe 4

TaIrTe 4 is a recently discovered type-II Weyl semimetal, hosting only four Weyl points. In this work, we study the cleaved TaIrTe 4 crystal using scanning tunneling microscopy/spectroscopy and find that it also hosts a superconducting state with a transition temperature of 3.9 K. From Dynes function fitting, the superconducting phase is consistent with anisotropic s-wave pairing, with a superconducting gap of 1.31 meV. This value leads to a value of 2Δ max /k B T C = 7.81 , much larger than the 3.53 predicted by Bardeen-Cooper-Schrieffer theory for weak-coupling superconductors. The critical field is found to be 0.7 T based on the analysis of tunneling conductance as a function of magnetic field. Two types of nonmagnetic defects on the TaIrTe 4 surface are observed, neither of which induce bound states inside the superconducting gap, further supporting conventional s-wave superconductivity in the TaIrTe 4 system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1985

The generation of rolling moments with the superconducting solenoid model

The superconducting solenoid model is a pilot model core for levitation in a wind tunnel magnetic suspension system. This type of core would replace the ferromagnetic core typically installed in the model fuselage. For suspension purposes, the solenoid is operated upon by a set of electromagnets surrounding the wind tunnel which are to support and restrain the model at required positions and orientations under the influence of powerful aerodynamic disturbances. The subject of providing sources of magnets rolling moment for use when spanwise magnets, which can be used for winged models, are not available is covered. Several methods have emerged for generating a rolling moment based on the use of additional superconducting loops or magnetic poles positioned around or within the solenoid. Predictions of the moment capacities of superconducting loops in models sized for a large wind tunnel are presented. An existing prototype superconducting model proved a suitable vehicle for demonstrating and calibrating, at a smaller scale, some of the other roll elements based on magnetic pole devices. Calibration data are included.

Goodyear, M. J.↗
DOE OSTI2023

Antiferromagnetism-driven two-dimensional topological nodal-point superconductivity

Magnet/superconductor hybrids (MSHs) hold the promise to host emergent topological superconducting phases. Both one-dimensional (1D) and two-dimensional (2D) magnetic systems in proximity to -wave superconductors have shown evidence of gapped topological superconductivity with zero-energy end states and chiral edge modes. Recently, it was proposed that the bulk transition-metal dichalcogenide 4Hb-TaS 2 is a gapless topological nodal-point superconductor (TNPSC). However, there has been no experimental realization of a TNPSC in a MSH system yet. Here we present the discovery of TNPSC in antiferromagnetic (AFM) monolayers on top of an s-wave superconductor. Our calculations show that the topological phase is driven by the AFM order, resulting in the emergence of a gapless time-reversal invariant topological superconducting state. Using low-temperature scanning tunneling microscopy we observe a low-energy edge mode, which separates the topological phase from the trivial one, at the boundaries of antiferromagnetic islands. As predicted by the calculations, we find that the relative spectral weight of the edge mode depends on the edge’s atomic configuration. Our results establish the combination of antiferromagnetism and superconductivity as a novel route to design 2D topological quantum phases.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Superconducting pairing mechanism in CeCoIn 5 revisited

Spectroscopic-imaging scanning-tunneling microscopy (SI-STM) measurements have previously been applied to the study of the heavy-fermion system CeCoIn 5 to examine the superconducting gap structure and band dispersions via quasiparticle intereference. Here we directly measure the dispersing electron bands with angle-resolved-photoelectron spectroscopy (ARPES) and compare with first principles electronic structure calculations. By auto-correllating the ARPES-resolved bands with themselves we can measure the potential q-vectors and discern exactly which bands the STM is measuring. We find that the STM results are dominated by scattering associated with a cloverleaf shaped band centered at the zone corners. This same band is also a viable candidate to host the superconducting gap. Overall, the electronic structure calculations indicate that this region of the Fermi surface involves significant contributions from the Co d-electrons, an indication that the superconductivity in these materials is more 3-dimensional than that found in the related unconventional superconductors, the cuprates and the pnictides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Tunneling spectroscopy of c -axis epitaxial cuprate junctions

Atomically precise epitaxial structures are unique systems for tunneling spectroscopy that minimize extrinsic effects of disorder. We present a systematic tunneling spectroscopy study, over a broad doping, temperature, and bias range, in epitaxial c-axis La 2-x Sr x CuO 4 /La 2 CuO 4 /La 2-x Sr x CuO 4 heterostructures. The behavior of these superconductor/insulator/superconductor (SIS) devices is unusual. Down to 20 mK there is complete suppression of c-axis Josephson critical current with a barrier of only 2 nm of La 2 CuO 4 , and the zero-bias conductance remains at 20–30% of the normal-state conductance, implying a substantial population of in-gap states. Tunneling spectra show greatly suppressed coherence peaks. Furthermore, as the temperature is raised, the superconducting gap fills in rather than closing at T c . For all doping levels, the spectra show an inelastic tunneling feature at ~80 meV, suppressed as T exceeds T c . These nominally simple epitaxial cuprate junctions deviate markedly from expectations based on the standard Bardeen-Cooper-Schrieffer theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1984

Magnetic suspension and balance system study

A compact design for a superconducting magnetic suspension and balance system is developed for a 8 ft. x 8 ft. transonic wind tunnel. The main features of the design are: a compact superconducting solenoid in the suspended airplane model; permanent magnet wings; one common liquid helium dewar for all superconducting coils; efficient new race track coils for roll torques; use of established 11 kA cryostable AC conductor; acceptable AC losses during 10 Hz control even with all steel structure; and a 560 liter/hour helium liquefier. Considerable design simplicity, reduced magnet weights, and reduced heat leak results from using one common dewar which eliminates most heavy steel structure between coils and the suspended model. Operational availability is thought to approach 100% for such magnet systems. The weight and cost of the magnet system is approximately one-third that of previous less compact designs.

Boom, R. W.↗
DOE OSTI2021

Visualizing superconductivity in a doped Weyl semimetal with broken inversion symmetry

The Weyl semimetal Mo Te 2 offers a rare opportunity to study the interplay between Weyl physics and superconductivity. Recent studies have found that Se substitution can boost the superconductivity up to 1.5 K, but suppresses the T d structure phase that is essential for the emergence of the Weyl state. A microscopic understanding of the possible coexistence of enhanced superconductivity and the T d phase has not been established so far. Here, we use scanning tunneling microscopy to study an optimally doped superconductor Mo Te 1.85 Se 0.15 with bulk T c ~ 1.5 K . By means of quasiparticle interference imaging, we identify the existence of a low-temperature T d phase with broken inversion symmetry where superconductivity globally coexists. Furthermore, we find that the superconducting coherence length, extracted from both the upper critical field and the decay of density of states near a vortex, is much larger than the characteristic length scale of the existing chemical disorder. Overall, our findings of robust superconductivity arising from a Weyl semimetal normal phase in Mo Te 1.85 Se 0.15 make it a promising candidate for realizing topological superconductivity.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Magnetic suspension and balance system advanced study

An improved compact design for a superconducting magnetic suspension and balance system for an 8 ft. x 8 ft. transonic wind tunnel is developed. The original design of an MSBS in NASA Cr-3802 utilized 14 external superconductive coils and a superconductive solenoid in the airplane test model suspended in a wind tunnel. The improvements are in the following areas: test model solenoid options, dynamic force limits on the model, magnet cooling options, structure and cryogenic designs, power supply specifications, and cost and performance evaluations. The improvements are: MSBS cost reduction of 28%, weight; reduction of 43%, magnet system ampere-meter reduction of 38%, helium liquifier capacity reduction by 33%, magnet system stored energy reduction by 55%, AC loss to liquid helium reduced by 76%, system power supply reduced by 68%, test coil pole strength increased by 19%, wing magnetization increased by 40%, and control frequency limit increased by 200% from 10 Hz to 30 Hz. The improvements are due to: magnetic holmium coil forms in the test model, better rare earth permanent magnets in the wings, fiberglass-epoxy structure replacing stainless steel, better coil configuration, and new saddle roll coil design.

Boom, R. W.↗
DOE OSTI2023

Smectic pair-density-wave order in EuRbFe 4 As 4

The pair density wave (PDW) is a superconducting state in which Cooper pairs carry centre-of-mass momentum in equilibrium, leading to the breaking of translational symmetry. Experimental evidence for such a state exists in high magnetic field and in some materials that feature density-wave orders that explicitly break translational symmetry. However, evidence for a zero-field PDW state that exists independent of other spatially ordered states has so far been elusive. Here we show that such a state exists in the iron pnictide superconductor EuRbFe 4 As 4 , a material that features co-existing superconductivity (superconducting transition temperature ( T c ) ≈ 37 kelvin) and magnetism (magnetic transition temperature ( T m ) ≈ 15 kelvin). Using spectroscopic imaging scanning tunnelling microscopy (SI-STM) measurements, we show that the superconducting gap at low temperature has long-range, unidirectional spatial modulations with an incommensurate period of about eight unit cells. Upon increasing the temperature above Tm, the modulated superconductor disappears, but a uniform superconducting gap survives to T c . When an external magnetic field is applied, gap modulations disappear inside the vortex halo. The SI-STM and bulk measurements show the absence of other density-wave orders, indicating that the PDW state is a primary, zero-field superconducting state in this compound. FInally, both four-fold rotational symmetry and translation symmetry are recovered above T m , indicating that the PDW is a smectic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2006

Techniques for Connecting Superconducting Thin Films

Several improved techniques for connecting superconducting thin films on substrates have been developed. The techniques afford some versatility for tailoring the electronic and mechanical characteristics of junctions between superconductors in experimental electronic devices. The techniques are particularly useful for making superconducting or alternatively normally conductive junctions (e.g., Josephson junctions) between patterned superconducting thin films in order to exploit electron quantum-tunneling effects. The techniques are applicable to both low-Tc and high-Tc superconductors (where Tc represents the superconducting- transition temperature of a given material), offering different advantages for each. Most low-Tc superconductors are metallic, and heretofore, connections among them have been made by spot welding. Most high-Tc superconductors are nonmetallic and cannot be spot welded. These techniques offer alternatives to spot welding of most low-Tc superconductors and additional solutions to problems of connecting most high-Tc superconductors.

Mester, John↗
DOE OSTI2020

A density-functional theory study of the Al/AlOx/Al tunnel junction

The aluminum oxide tunnel junction is a key component of the majority of superconducting quantum devices. For high-quality, reproducible, and scalably manufacturable qubits, the ability to fabricate Josephson junctions (JJs) with a targeted critical current and high uniformity is essential. In this study, we use first-principles modeling to assess fundamental aspects of the atomic structure of both amorphous and crystalline aluminum oxide tunnel junctions and relate the structure to predicted performance metrics. We use modified ab initio molecular dynamics to develop realistic models of the tunnel junction, from which interface roughness and local thickness fluctuations are analyzed in an unbiased manner by training a neural network to identify the boundary between metal and oxide. We show that the effective thickness of the insulating part of the junction can be different from the apparent physical thickness. We calculate the rate of Cooper pair tunneling for the atomically resolved electrostatic potential using direct numerical solution in 3D, which shows a channeling effect that impacts the junction critical current. The predicted critical current is a useful JJ design parameter that can be accessed from the ab initio calculations without fitting parameters. To assess the limits of uniformity and fabrication choices (e.g., oxidation vs epitaxy), we compare the amorphous junctions to crystalline models, which show order of magnitude more efficient tunneling compared to the amorphous case, underlining the connection between atomistic structure and Cooper pair tunneling efficiency. Further, this work provides a foundation for ab initio materials design and evaluation to help accelerate future development of improved tunnel junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Topological superconductivity in skyrmion lattices

Atomic manipulation and interface engineering techniques have provided an intriguing approach to custom-designing topological superconductors and the ensuing Majorana zero modes, representing a paradigm for the realization of topological quantum computing and topology-based devices. Magnet-superconductor hybrid (MSH) systems have proven to be experimentally suitable to engineer topological superconductivity through the control of both the complex structure of its magnetic layer and the interface properties of the superconducting surface. Here, we demonstrate that two-dimensional MSH systems containing a magnetic skyrmion lattice provide an unprecedented ability to control the emergence of topological phases. By changing the skyrmion radius, which can be achieved experimentally through an external magnetic field, one can tune between different topological superconducting phases, allowing one to explore their unique properties and the transitions between them. In these MSH systems, Josephson scanning tunneling spectroscopy spatially visualizes one of the most crucial aspects underlying the emergence of topological superconductivity, the spatial structure of the induced spin–triplet correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Orderly disorder in magic-angle twisted trilayer graphene

Magic-angle twisted trilayer graphene (TTG) has recently emerged as a platform to engineer strongly correlated flat bands. We reveal the normal-state structural and electronic properties of TTG using low-temperature scanning tunneling microscopy at twist angles for which superconductivity has been observed. Real trilayer samples undergo a strong reconstruction of the moiré lattice, which locks layers into near–magic-angle, mirror symmetric domains comparable in size with the superconducting coherence length. This relaxation introduces an array of localized twist-angle faults, termed twistons and moiré solitons, whose electronic structure deviates strongly from the background regions, leading to a doping-dependent, spatially granular electronic landscape. The Fermi-level density of states is maximally uniform at dopings for which superconductivity has been observed in transport measurements.

Science & Technology - Other Topics↗
DOE OSTI2024

The nontrivial effects of annealing on superconducting properties of Nb single crystals

The effect of annealing on the superconducting properties of niobium single crystals was studied using optical, magnetic, and scanning tunneling microscopy (STM) methods. Pieces of the same crystal boule were studied before and after the annealing at 800 ${^\circ}\textrm{C}$, 1400 ${^\circ}\textrm{C}$, and near the melting point of niobium (2477 ${^\circ}\textrm{C}$). The initial samples had a high hydrogen content and low-temperature imaging revealed large hydrides (hundreds of micrometers) appearing below 190 K. The formation of these large precipitates is already completely suppressed by annealing at 800 ${^\circ}\textrm{C}$. However, the overall superconducting properties of the annealed samples did not improve and, in fact, worsened. In particular, the superconducting transition temperature decreased, the upper critical field increased, and the pinning strength increased. In the STM study, the sample was annealed initially at 400 ${^\circ}\textrm{C}$, measured, annealed at 1700 ${^\circ}\textrm{C}$, and measured again. The STM revealed a ‘dirty’ superconducting gap with a significant spatial variation in tunneling conductance after annealing at 400 ${^\circ}\textrm{C}$. The clean gap was recovered after annealing at 1700 ${^\circ}\textrm{C}$. This is likely due to oxygen redistribution near the surface, which is always covered by oxide layers in as-grown crystals. Our results indicate that vacuum annealing at least up to 1400 ${^\circ}\textrm{C}$, while removing a large percentage of hydrogen, introduces additional nanosized defects, likely hydride precipitates, that act as efficient pair-breaking and pinning centers. The dimensionless scattering rate is estimated to have increased from $\Gamma = 0.2$ to about $\Gamma = 0.4$ after annealing at 1400 ${^\circ}\textrm{C}$. These results on single crystals differ drastically from those obtained in polycrystalline bulk niobium (i.e. cut from superconducting radio-frequency cavities), where annealing is known to have a significant positive effect that is attributed to the improvement of the crystalline structure masking the more subtle influence of the hydrides.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Transition-state lattice modes and the breakdown of adiabatic tunneling for hydrogen and deuterium in bcc Nb

Interstitial hydrogen and deuterium in body-centered-cubic metals constitute archetypal quantum tunneling systems. Their relevance has been renewed by the connection between hydrogenic tunneling in Nb and defect-induced decoherence in superconducting qubits, motivating a predictive microscopic theory. Existing theoretical treatments invoke an adiabatic separation between the light interstitial and the host lattice, an assumption whose validity has not been rigorously established for hydrogenic species. Here, we show that the experimentally measured tunnel splittings of O-trapped H and D in bcc Nb are quantitatively reproduced only within a five-dimensional (5D) Lattice-Renormalized Born-Oppenheimer (LRBO) framework. This approach treats three interstitial modes and two judiciously selected lattice modes, which includes a transition-state mode, on equal quantum footing. By recasting nested Born-Oppenheimer hierarchies within this same formalism and benchmarking against modern \textit{ab initio} potential energy surfaces, we show that adiabatic separation of the light particle from lattice dynamics is satisfied only in the positive-muon ($μ^{+}$) mass limit. In contrast, tunneling for H and D is fundamentally a collective, nonadiabatic process mediated by anharmonic lattice couplings. Finally, we show that the breakdown of adiabaticity can be anticipated from simple energy estimates involving the ground-state light-particle energy evaluated at a small number of fixed lattice configurations, providing a practical criterion for assessing the validity of adiabatic tunneling theories in other systems.

Pritchard, P. Graham [Northwestern U.]↗
DOE OSTI2021

Twisted van der Waals Josephson Junction Based on a High-T c Superconductor

Stacking two-dimensional van der Waals (vdW) materials rotated with respect to each other show versatility for studying exotic quantum phenomena. In particular, anisotropic layered materials have great potential for such twistronics applications, providing high tunability. In this work, we report anisotropic superconducting order parameters in twisted Bi 2 Sr 2 CaCu 2 O 8+x (Bi-2212) vdW junctions with an atomically clean vdW interface, achieved using the microcleave-and-stack technique. The vdW junctions with twist angles of 0° and 90° showed the maximum Josephson coupling, comparable to that of intrinsic Josephson junctions. As the twist angle approaches 45°, Josephson coupling is suppressed, and eventually disappears at 45°. The observed twist angle dependence of the Josephson coupling can be explained quantitatively by theoretical calculation with the d-wave superconducting order parameter of Bi-2212 and finite tunneling incoherence of the junction. Our results revealed the anisotropic nature of Bi-2212 and provided a novel fabrication technique for vdW-based twistronics platforms compatible with air-sensitive vdW materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗