SEARCH · Engineering Papers

Results for “Sorbent design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Dual function materials (Ru+Na 2 O/Al 2 O 3 ) for direct air capture of CO 2 and in situ catalytic methanation: The impact of realistic ambient conditions

Here a dual function material (DFM) comprised of 1% Ru, 10% Na 2 O/γ–Al 2 O 3 was studied for combined direct air capture (DAC) of CO 2 and catalytic methanation in a temperature swing operation. In the newly proposed operation, the DFM captures CO 2 (400 ppm) from air at ambient conditions. The material is then heated in H 2 to a temperature sufficient for catalytic conversion of the captured CO 2 to renewable natural gas. In this study, we demonstrate high CO 2 adsorption capacity and rates at ambient conditions (25 °C); the adsorbed CO 2 is then successfully catalytically methanated upon heating in H 2 . Adsorption was also carried out in humid conditions, more closely simulating ambient air. Adsorption and methane production were greatly improved with stable initial performance. The rate of adsorption is shown to be flowrate-dependent, which is critical for future reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Data-Driven Discovery of Linear Molecular Probes with Optimal Selective Affinity for PFAS in Water

Approaches to tackle the wide and growing variety of highly persistent per- and polyfluoroalkyl substances (PFAS) are of pressing global need because of their detrimental human health effects, such as cancer, birth defects, and hormone imbalance. Sensitive, selective, and easy-to-use real-time sensors to monitor and detect PFAS and sorbents to extract them are critical to meeting government-mandated environmental concentrations. In this work, we combine all-atom molecular dynamics simulations, enhanced sampling, deep representational learning, and Bayesian optimization to perform high-throughput virtual screening for highly sensitive and selective molecular probes. Our molecular design space consists of 3850 linear hydrocarbon chains with varying degrees of halogenation with and without amine- and phosphine-based headgroups. By employing a data-driven search process, we efficiently explore the molecular design space to optimize the sensitivity to perfluorooctanesulfonic acid (PFOS) as a prototypical PFAS analyte and selectivity relative to a sodium dodecyl sulfate (SDS) interferent. We calculate 504 Gibbs free energies of probe-analyte and probe-interferent interactions and identify probes with PFOS association free energies of up to (-ΔG PFOS ) = 9.8 ± 0.2 kJ/mol and selectivities relative to SDS of (-ΔΔG PFOS–SDS ) = 3.1 ± 1.5 kJ/mol. A C 11 Br 23 P(CH 3 ) 2 probe containing 11 backbone brominated carbons and a tertiary phosphine headgroup possesses the most sensitive binding constant to PFOS within the defined search space of K b PFOS = 177.4 ± 12.7, and a semibrominated probe C 5 H 11 C 7 Br 14 N(CH 3 ) 2 containing 12 backbone carbons and a tertiary amine headgroup possesses the highest selectivity relative to SDS of K b PFOS /K b SDS = 4.6 ± 1.7. A retrospective analysis of our data to extract interpretable design rules reveals that the sensitivity of linear hydrogenated probes increases by approximately 1 kJ/mol per C–C bond. The addition or removal of halogen atoms and amine or phosphine headgroups produces nonmonotonic changes in both sensitivity and selectivity with changes to the sensitivity of up to 2.5 kJ/mol. Finally, this work places empirical limitations on the performance of a wide range of linear probes for PFOS detection and offers a generic strategy for high-throughput computational screening to promote selective and sensitive binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Bench-Scale Development of a Novel Direct Air Capture Technology Using High-Capacity Structured Sorbents

The work performed under this project has resulted into development of a DAC technology utilizing a structured sorbent to capture CO 2 from ambient air with a key innovation of direct Joule heating of the sorbent for CO 2 desorption. A working SMA, fully integrated with an electrically resistive heating layer, high surface area support, and high CO 2 capacity sorbent coated onto a commercial ceramic monolithic substrate, was successfully developed and demonstrated over >200 adsorption-desorption cycles in a high-fidelity bench test unit directly using ambient air. A cordierite-based monolith was selected as a substrate owing to its high surface area, low bulk density, low heat capacity, and commercial availability. Reaction kinetics study conducted during this project led to development of a promoter for the base Na 2 CO 3 sorbent that could be incorporated into the sorbent to enhance to achieve higher CO 2 adsorption/desorption rates, greater working capacity, and reduced regeneration temperature. An accelerated aging study was conducted in a TGA to determine sorbent stability and no degradation in the sorbent performance was observed even after 250 adsorption-desorption cycles. An electrically resistive heating layer was developed with tunable electrical properties. The heating layer was coated onto the selected cordierite substrate. Aging studies performed showed the electrical properties and heating performance was stable after 500 heating and cooling cycles. The collective findings on the selected cordierite substrate, robust heating layer, promoter and sorbent selection were used to synthesize a full, 6”x6” SMA for bench-scale testing. The bench-scale DAC system was constructed to test full size SMAs using real ambient air for adsorption and joule heating for regeneration. After completing shakedown and commissioning of the 1 kg/day of CO 2 capacity DAC bench unit, an extended operation was performed to complete over 230 cycles with the full size SMA. This testing showed no observable degradation in sorbent performance. A detailed process model, TEA and LCA were developed for a conceptual 100,000 TPY CO 2 removal DAC facility. The LCA results show the net CO 2 e emissions from the DAC system are highly dependent on the electricity source. All other factors, including SMA manufacturing, materials for facility enclosure, etc., are minor cost contributors compared to the energy consumption required for CO 2 removal. With the successful development and validation of the SMA for the sustained performance for CO 2 removal from ambient air with joule heated regeneration in this project, a fully integrated 1 TPY bench-scale DAC system is currently in development with the support of DOE/FECM (DE-FE0032243). The project objective is to demonstrate the engineering design of the DAC system to produce a continuous, high purity CO 2 stream from ambient air. This project will address and validate key engineering features of the DAC system including the gas sealing mechanism and panels, enclosure and air contactor design, and automation sequence to achieve continuous CO 2 production.

42 ENGINEERING↗

DOE OSTI2025

Solid Amine CO2 Adsorbent Degradation: Insights from Experiments and Atomistic Simulations

Direct air capture (DAC) has received significant attention this decade as a viable solution to limit global warming, although large-scale deployment is currently not economically feasible. To reach the ambitious cost target set by the U.S. of $100/ton CO2 captured and stored, significant improvements must be made to sorbent lifetime and capacity. Aminosilanes grafted onto silica supports are promising candidates for deployment in DAC systems due to their relatively high oxidative stability and low regeneration temperature. Despite myriad advancements in the field, there still exists a fundamental knowledge gap relating sorbent structure to performance. In this work, we grafted various aminosilanes onto the highly porous silica SBA-15 and characterized both oxidative stability and CO2 capacity. Material properties systematically investigated included amine moiety (primary vs. secondary), silane group structure, number of linkages to the silica support, and co-addition of impregnated amines (e.g., PEI), among others. A fixed bed system was used to execute accelerated degradation studies in the presence of humidity and varying temperatures to simulate realistic operating conditions. Atomistic simulations were combined with the experimental results to gain mechanistic insight, ultimately informing the design of next-generation materials

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

The status and prospects of materials for carbon capture technologies

In order to combat climate change, carbon dioxide (CO 2 ) emissions from industry, transportation, buildings, and other sources need to be captured and long-term stored. Decarbonization of these sources requires special types of materials that have high affinities for CO 2 . Potassium hydroxide is a benchmark aqueous sorbent that reacts with CO 2 to convert it into K 2 CO 3 and subsequently precipitated as CaCO 3 . Another class of carbon capture materials is solid sorbents that are usually functionalized with amines or have natural affinities for CO 2 . The next wave of materials for carbon capture under investigation includes activated carbon, metal–organic frameworks, zeolites, carbon nanotubes, and ionic liquids. In this issue of MRS Bulletin, some of these materials are highlighted, including solvents and sorbents, membranes, ionic liquids, and hydrides. Other materials that can capture CO2 from low concentrations of gas streams, such as air (direct air capture) are also discussed. Also covered in this issue are machine learning-based computer algorithms developed with the goal to speed up the progress of carbon capture materials development, and to design advanced materials with high CO 2 capacity, improved capture and release kinetics, and improved cyclic durability.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Final Report on Aerosol Pretreatment Technology Performance and Benchmarking

Solvent-based post-combustion CO 2 capture (PCC) technology remains one of the leading methods to combat global CO 2 emissions produced from large-scale coal-fired power production. Advanced solventbased PCC technology has made significant improvements in design and performance that reduce capital and operating costs to enable its commercial use. Key to low cost, manageable logistics, and environmentally safe operation of solvent-based PCC technology are minimal solvent losses from the process through the treated gas stream exiting PCC plant absorbers. High flue gas aerosol particle concentrations (>10 5 particles/cm 3 ) for particles in the range of 70-200 nm have been shown to cause significant amine solvent losses for solvent-based PCC processes through several mechanisms including absorption of solvent and water into growing aerosol particles. Flue gas aerosol pretreatment technology is the only realistic and economically attractive method to reduce very high aerosol particle concentrations (>10 7 particles/cm 3 ) to enable solvent-based PCC for existing power plants lacking sufficient particle removal systems, such as baghouses. The overall goal of this project was to design, construct, independently test, and evaluate three flue gas aerosol pretreatment technologies identified to significantly reduce high aerosol particle concentrations (>10 7 particles/cm 3 ) in the 70-200 nm particle size range: (1) a novel, high-velocity water injection spray concept developed by RWE and tested by Linde, (2) an innovative electrostatic precipitator (ESP) device with optimized operating conditions developed by Washington University in St. Louis (WUSTL), and (3) a non-regenerative sorbent-based filter technology developed by InnoSepra for SO x and NO x removal from coal-fired power plant flue gas. Each technology has been validated with tests on 500-1000 scfm of actual coal-fired flue gas and evaluated in terms of particle removal efficiency (%), cost competitiveness, and environmental impact. Aerosol measurements were performed upstream and downstream of each aerosol reduction unit during independent testing of each technology using advanced instrumentation and analytical methods provided by WUSTL. To perform aerosol measurements, isokinetic probes were inserted into flanged pipes attached to the flue gas piping, and a small suction pump was used to sample gas containing aerosol particles. Aerosol particle number concentrations (# particles/cm 3 ) and size distributions were then measured using a scanning mobility particle sizer (SMPS, TSI Inc.) for very fine particles (<1,000 nm) and a particle counter manufactured by GRIMM for particles larger than 1,000 nm. This report summarizes the aerosol removal performance results from pilot scale testing of each technology. Performance results have been benchmarked against pre-defined targets and other flue gas aerosol pretreatment technologies with documented performance. Linde Gas North America LLC has been the prime contractor to DOE responsible for overall project management and provided the design for the high-velocity water spray-based aerosol removal technology based on a design concept developed by the German utility company RWE.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2025

Electro-activated indigos intensify ampere-level CO 2 reduction to CO on silver catalysts

The electrochemical reduction of carbon dioxide (CO 2 ) to carbon monoxide (CO) is challenged by a selectivity decline at high current densities. Here we report a class of indigo-based molecular promoters with redox-active CO 2 binding sites to enhance the high-rate conversion of CO 2 to CO on silver (Ag) catalysts. Theoretical calculations and in situ spectroscopy analyses demonstrate that the synergistic effect at the interface of indigo-derived compounds and Ag nanoparticles could activate CO 2 molecules and accelerate the formation of key intermediates (*CO 2 – and *COOH) in the CO pathway. Indigo derivatives with electron-withdrawing groups further reduce the overpotential for CO production upon optimizing the interfacial CO 2 binding affinity. By integrating the molecular design of redox-active centres with the defect engineering of Ag structures, we achieve a Faradaic efficiency for CO exceeding 90% across a current density range of 0.10 − 1.20 A cm –2 . The Ag mass activity toward CO increases to 174 A mg –1 Ag . This work showcases that employing redox-active CO 2 sorbents as surface modification agents is a highly effective strategy to intensify the reactivity of electrochemical CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A series of cation-modified robust zirconium-based metal–organic frameworks for carbon dioxide capture

Metal–organic frameworks (MOFs) represent one of the most promising porous solids for possible use as sorbents to control and reduce the greenhouse gas emission. Studies have shown that open metal sites (OMS) interact strongly with carbon dioxide and thus, serve as efficient binding sites for CO 2 capture. However, many OMS-bearing MOFs are lack of framework stability and often have high regeneration temperature. To seek ways to solve the stability issue, we designed a series of isoreticular MOFs, Zr-tcpb-COOM (M = alkali/alkaline earth metal), by exchange of protons with metal ions on Zr-tcpb-COOH via post-synthetic modification (PSM). The pristine MOF (Zr-tcpb-COOH) has a very robust framework. The PSM process does not deteriorate the framework stability but creates metal binding sites that form strong bonds with carbon dioxide. The results show that at low CO 2 pressure, the uptake amount is enhanced considerably using Zr-tcpb-COOM and is in trend of increasing atomic number (Li + < Na + < K + < Ca 2+ ). High adsorption selectivity (CO 2 /N 2 IAST selectivity (15 : 85) = 539.5) is also achieved for CO 2 over N 2 at room temperature. This approach offers a feasible method to improve CO 2 capture capacity, especially at low concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Initial Assessment of TeF 6 Adsorption

Research and development that supports the management of off-gases from nuclear fuel reprocessing has historically been focused on the off-gas streams that arise from aqueous reprocessing technology. However, as Gen-IV reactor development pathways move toward deployment, alternative spent nuclear fuel (SNF) processing and disposition pathways have been considered more actively. This work is focused upon aspects of fluoride volatility (FV) processing. The versatility of this method for deployment against multiple types of spent fuel encourages the continued advancement of both the primary separations processes and the secondary processes, including waste treatment, material control and accountability, and engineering designs. Recent work noted that TeF 6 , the most highly volatile fluorinated compound produced during FV processing, did not have a clear abatement technology recommended in the literature. Thus, this work performed scoping tests on activated alumina and copper shot to assess whether they could be used to remove TeF 6 from gas streams that bear F 2 . Previous work on this topic was not well described in the literature and was not performed with excess F 2 in the stream as would be typical of spent fuel processing via FV. To support an understanding of the concentration of TeF 6 contacting the adsorbent beds, a series of preliminary testing identified the TeF 6 production rate and the equilibrium concentration of TeF 6 in the gas stream contacting the adsorbent. Excess F 2 was determined to not affect the ability of activated alumina to remove TeF 6 from the gas stream quickly and completely. A determination of whether excess F 2 affected the distribution depth of Te in the sorbent bed is still pending analysis of the used sorbent. Literature suggests that when activated alumina is near saturation, TeF 6 could migrate from the sorbent bed. Future testing should investigate this possibility. Copper metal did not adsorb TeF 6 in the presence of F 2 across the sorbent temperature range of 50 to 335°C. F 2 was fully removed by the copper bed. Although preliminary thermodynamics would indicate adsorption to be energetically favorable, other factors that impact adsorption (e.g., slow kinetics, excess fluorine on the copper surface, an unfavorable transition state) are likely preventing the adsorption of TeF 6 at an easily measurable rate. The work also investigated TeF 6 production from multiple forms of Te in the temperature range of 100 to 250°C. No previous study had assessed the initial reaction rates for this process. A carefully designed study allowed determination of the activation energy for the production of TeF 6 from Te metal. The substantial amount of data collected during this study merits analysis beyond what is described here. A more in-depth kinetic analysis will be pursued. Additional analytical results will provide the ability to benchmark adsorption coefficients for TeF 6 , understand the distribution of TeF 6 within the alumina bed, and better understand the effect of F 2 partial pressure on Te fluorination. The data from this report, as supplemented by these additional analyses, will be submitted to a peer-reviewed journal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Integrated Direct Air Capture and H₂-Free CO₂ Valorization

This project advances fundamental understanding of a novel integrated direct air capture (DAC) and CO₂ conversion process that valorizes atmospheric CO₂ without external H₂. The research encompasses four critical components: (1) design of task-specific ionic liquids for efficient CO₂ capture under ambient conditions, (2) development of H₂-free tandem catalytic systems using ethane as a reductant, (3) advanced operando characterization to elucidate capture and conversion mechanisms, and (4) data science-driven predictive computation to accelerate material discovery. Over the project period, we developed five high-performance DAC sorbent systems—including CaO/superbase ionic liquid composites, Ni-MOF/Ionic Liquid (IL) hybrids, fluorinated covalent organic frameworks with ion-pair functional groups, defect-engineered UiO-66, and a validated kinetic model for humid-condition operation, achieving CO₂ capacities up to 1.86 mmol/g at 400 ppm with excellent cycling stability. For H₂-free conversion, we constructed atomically synergistic Zn–O–Cr binuclear catalytic sites that achieve 100% ethylene selectivity, ~9.6% ethane conversion, and 99% CO₂ utilization in equimolar co-conversion of ethane and CO₂. We further demonstrated downstream valorization pathways converting CO and C₂H₄ into polyketones and C₃ chemicals. These advances strengthen the scientific foundation for producing value-added materials from ambient CO₂.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Advances in PFAS Monitoring and Remediation Using a Functionalized Material Approach

The growing global concerns about the effects to public health from human exposure to per- and polyfluoroalkyl substances (PFAS) motivates the development of strategies for reliable monitoring of PFAS in environmental streams, as well as for their rapid, effective removal if detected. For the continuous PFAS monitoring, an inexpensive, field-deployable, in situ sensor is urgently needed; yet the prevalent in situ techniques often struggle to strike a balance between the practical sensitivity and selectivity demands of the real world. Similarly, for effective PFAS removal, strategies for their fast, selective, and quantitative capture are desired, yet the present commercially available sorbents are unable to meet the requirements of rapid, quantitative capture of all PFAS components, and are notably inefficient in removing the more toxic smaller chains. To address these twin challenges, Pacific Northwest National Laboratory is developing strategies for improved detection and remediation of PFAS. For the rapid, selective, quantitative removal of PFAS from environmental streams, the strategy relies on designing capture probes with exclusively tailored electronic and spatial affinities for the PFAS that are able to selectively capture them from environmental streams. For the in situ detection and quantification of PFAS in complex, multicomponent matrices such as groundwater, the approach relies on the targeted capture of specific PFAS by these PFAS-specific capture probes immobilized on a platform. The platform acts as an electrode to directly measure PFAS concentration through a proportional change in electrical response upon their capture. A combination of optimization of platform design and incorporation of additional, sensitive detection modalities have allowed us to achieve detection limits as low as 0.5 ng/L for detection of PFAS compounds (compared to the 70 ng/L Health Advisory Limit of the U.S. Environmental Protection Agency).

Per- and poly-fluorinated alkyl substances (PFAS),↗

DOE OSTI2020

Advances in PFAS Monitoring and Remediation Using a Functionalized Material Approach - 20080

47 OTHER INSTRUMENTATION↗

DOE OSTI2026

Mechanistic Tuning of Chemical Transformations for Coupling the Geo-mimicry of Acid Gas Storage with Design Strategies to Produce Clean Energy Carriers in Multi-Phase Reaction Environments (MATTER) (Final Report)

The need to diversify approaches to produce essential energy carriers such as H 2 motivate advances in thermodynamically downhill geo-inspired pathways. Currently, more than 80% of hydrogen is produced via steam methane reforming (SMR) followed by water gas shift reaction (WGSR) pathway with the co-production of CO 2 . As an alternative to introducing CO 2 separation strategies downstream such as the use of membranes, solvents, or sorbents, geo-inspired carbon mineralization is harnessed as an alternative crystallization pathway. The thermodynamically downhill carbon mineralization pathways are hypothesized to accelerate H2 conversion while separating CO 2 . The work conducted through this project discusses the mechanisms associated with coupling the water gas shift reaction (WGSR) with carbon mineralization. In addition to harnessing Ca- and Mg-bearing oxides or hydroxides that are known to be reactive for CO 2 capture, the use of earth abundant silicate minerals such as Ca- and Mg-bearing silicates, is also investigated. Key outcomes include approaches to architect Mg-silicate with well-controlled pore size distributions, probing the enhancement in H 2 yield with inherent CO 2 suppression using Ca- and Mg-bearing oxides, hydroxides, and silicates, elucidating the changes in silicate chemistry during carbon mineralization, and exploring direct integration of carbon mineralization with WGSR and the development of separate low temperature pathway for reactive CO 2 capture and mineralization are developed.

08 HYDROGEN↗

DOE OSTI2022

Heat and Mass Transfer in Hygroscopic Hydrogels

Hygroscopic hydrogels have emerged as a scalable material capable of high-performance vapor sorption for atmospheric water harvesting, dehumidification, and passive cooling due to their fast kinetics and high water uptake. Despite extensive research interest, there is a lack of understanding of the governing energy and mass transport mechanisms within the hydrogels, which hinders their optimization. Here we present a model that explains sorption and desorption in hygroscopic hydrogels for the first time. Our model couples vapor transport in the hydrogel micropores, liquid transport in the polymer nanopores, and heat transport in the porous hydro-gel to accurately capture experimentally observed sorption and desorption data. The knowledge obtained from this model can therefore guide the design of hygroscopic hydrogels and enable improved performance in multi-ple sorption-based applications.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Metal Organic Frameworks for Noble Gas Management in the Liquid Fluoride Thorium Reactor (LFTR) (CRADA 459)

The purpose of this project is to demonstrate the novel class of materials known as metal organic frameworks (MOFs) to capture Xe selectively from simulated LFTR off gas. This will establish the viability of designing a dramatically improved approach to noble gas management as compared to activated carbon. However, there are significant data gaps that need to be addressed in order to deploy this technology for LFTRs that include i) converting MOF powders into engineered forms to produce mechanically robust particles, ii) the radiation stability and associated mechanism of degradation (if any) upon irradiation of these sorbent materials and iii) demonstration and comparison to activated carbon of the noble gas separation from simulated LFTR gas stream.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

Mining Air for Fuels and Fine Chemicals

The Intergovernmental Panel on Climate Change’s 2021 report underscores that Direct Air Capture (DAC) is an essential component to limiting global warming to 2 °C, yet separating CO 2 from air and its subsequent concentration for conversion into carbon neutral fuels/chemicals or permanent storage remains energy intensive and costly. Further, most DAC technologies rely on repetitive capture and release cycles that reduces the amount of time the DAC materials are able to collect CO 2 and increases wear and tear. Moisture swing (MS) sorption within anion exchange materials utilizes differences in relative humidity to capture and concentrate CO 2 up to 500-fold with negligible energy inputs and low-cost sorbents. Molecular modeling predicts that membranes with a dry and wet side would actively transport CO 2 from its dry side to its wet side against a counter flow of H 2 O evaporating on the dry side, however, existing MS materials are too brittle to be processed into membranes to test this hypothesis. This project brought together experts in DAC materials and design, techno-economic analysis and project management at Arizona State University (ASU), polymer processing at University of Texas at Austin (UTA) and modeling gas transport and exchange at Norther Arizona University (NAU) to develop hollow fiber membranes that use energy from water evaporation to continuously pump CO 2 from air against a concentration gradient to the membranes interior and requiring significantly less energy than current DAC technologies. While this project did not meet its ultimate objectives of demonstrating an active CO 2 pumping membrane, a number of key accomplishments were made in developing low-cost, flexible anion exchange membranes (AEM) at 3.5 m 2 scale, characterizing the ionic and molecular transport within MS materials, and developing several analytical and mathematical models of the MS and pumping process leading to new fundamental knowledge about key rate limiting steps of CO 2 flux in anion exchange membranes at low water activity. Technoeconomic models show that if CO 2 fluxes ≥ 25 µmol CO 2 m -2 s -1 (membrane surface area) are achieved that cost ≤ $\$$100/tonne CO 2 captured, purified and compressed to pipeline quality is possible. The knowledge gained in this research will guide future research in developing new materials toward overcoming these rate limiting steps that in turn could enable transformative and disruptive DAC technologies needed for capturing gigatons of CO 2 per year needed to limiting global warming to 2 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Full-Loop Simulation of the Combustion of Biomass in a Circulating Fluidized Bed Combustor

Interest in circulating fluidized bed (CFB) boilers as a power generation technology has skyrocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing, which results in higher combustion efficiency, and the ability to use lower rank fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions, while SO 2 emissions can be conveniently controlled through the addition of Ca-based sulfur sorbents within the combustor. This report summarizes the development of a comprehensive computational fluid dynamics (CFD) model for biomass combustion in a 50 kW th CFB combustor employing the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite at the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The experimental combustor was designed, built, and operated at CanmetENERGY, Natural Resources Canada in Ottawa, Canada. This work is the culmination of a multi-year collaboration between NETL and CanmetENERGY. The hydrodynamics in the full loop are validated against cold-flow experiments conducted at CanmetENERGY. To mimic the dense packing in the standpipe in the absence of a collisional model in the MFiX-PIC approach, the ram valve in the return leg is partially closed to obstruct the flow. A combustion reaction scheme was developed that considers the volatiles released by the fuel as a lumped species that fully converts to CO 2 and H 2 O. The so-called enhanced simplified combustion scheme produces an excellent match with experimental data in terms of the species concentrations of CO 2 and O 2 at the outlet and the freeboard, demonstrating the utility of the comprehensive model for a range of flow conditions and operating temperatures. Furthermore, the model can be readily adapted to simulate combustion of a variety of biomass fuels as well as co-fired systems under air and oxy-fuel conditions.

09 BIOMASS FUELS↗

DOE OSTI2025

Frontiers of Ionic Liquids in Carbon Dioxide Separation and Valorization

Ionic liquids (ILs) have emerged as highly tunable sorbents and membranes for gas separation, especially in the purification of CO 2 -containing gas streams such as air, natural gas, biogas, and syngas. Their negligible volatility, high thermal stability, and chemical versatility position them as promising alternatives to conventional amine and alkaline metal derivative-based systems, effectively addressing key challenges such as volatility, stability, and high regeneration energy. Here, this Review explores IL-derived systems for CO 2 -related gas separation across dense, porous, and supported categories. At the dense liquid level, we discuss strategies for tailoring IL properties to optimize CO 2 sorption, focusing on the correlation between IL-CO 2 interaction strength, uptake capacity, and regeneration energy. Key advancements in carbon capture, including amino-functionalized (AILs) and superbase-derived ILs (SILs), are highlighted, along with strategies such as chemical structure engineering, multiple binding site integration, alternative driving force exploration, and stability enhancement. Then, the porous liquids (PLs) scale focuses on the emerging field integrating IL properties with permanent porosity engineering, spanning ultramicropores (<5 Å) to macropores (around 100 nm). These innovations improve gas uptake capacity, accelerate transport kinetics, introduce the gating effect, and enable the coexistence of active sites with antagonistic properties within a single IL medium. At the supported IL scale, the discussion shifts to IL- and ionic pair-modified sorbents and membranes, emphasizing the modulation of cations and anions, confinement effects from porous supports, and the IL–interface interaction to enhance CO 2 separation performance, particularly in diluted gas streams. Beyond separation, this Review highlights IL-based integrated processes for CO 2 capture and conversion into value-added chemicals via thermocatalytic, electrocatalytic, and photocatalytic pathways. At each scale, advanced computational and experimental tools for IL design are also discussed, providing insights into stability enhancement, sorption efficiency, and process integration. The Review concludes by addressing existing challenges and outlining future directions for IL-driven innovations in gas separation technologies.

Qiu, Liqi [Univ. of Tennessee, Knoxville, TN (Unit↗