Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solvation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Li + (ionophore) nanoclusters engineered aqueous/non-aqueous biphasic electrolyte solutions for high-potential lithium-based batteries

The use of aqueous/non-aqueous biphasic electrolyte solutions in Li-based battery systems circumvents the limitations of poor reductive stability of aqueous electrolyte solutions, broadening their electrochemical stability window. However, aqueous/non-aqueous electrolytes suffer from biphasic mixing and high impedance when Li ions cross the biphasic interface. Here we propose the use of 12-crown-4 (12C4) and tetraglyme (G4) as lithium ionophores to form Li + (ionophore) nanoclusters in both non-aqueous and aqueous phases to overcome the interface challenges in biphasic electrolytes. The Li + (ionophore) nanoclusters have the H 2 O-excluding inner Li + solvation structure in non-polar 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (TTE), allowing fast charge transport across the biphasic interface without solvent mixing or water shuttling. Further, a tailored electrolyte formulation comprising the lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt, 12C4, TTE and H 2 O solvents (labelled LiTFSI-12C4@TTE/H 2 O) demonstrates low impedance (2.7 Ω cm -2 ) at the TTE/H 2 O interface and enabling 2,000 cycles of prelithiated graphite||LiFePO 4 coin cells at 850 mA g -1 with an average Coulombic efficiency of 99.8%. Single-layer 22.5 mAh Li||LiMn 2 O 4 pouch cells using LiTFSI-12C4@TTE/H 2 O electrolyte with G4 delivered a stable discharge capacity of about 1.3 mAh cm -2 for 80 cycles at 0.5 mA cm -2 .

25 ENERGY STORAGE↗
DOE OSTI2023

Electrolyte design for Li-ion batteries under extreme operating conditions

The ideal electrolyte for the widely used LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)||graphite lithium-ion batteries is expected to have the capability of supporting higher voltages (≥4.5 volts), fast charging (≤15 minutes), charging/discharging over a wide temperature range (±60 degrees Celsius) without lithium plating, and non-flammability. No existing electrolyte simultaneously meets all these requirements and electrolyte design is hindered by the absence of an effective guiding principle that addresses the relationships between battery performance, solvation structure and solid-electrolyte-interphase chemistry. Here we report and validate an electrolyte design strategy based on a group of soft solvents that strikes a balance between weak Li+-solvent interactions, sufficient salt dissociation and desired electrochemistry to fulfil all the aforementioned requirements. Remarkably, the 4.5-volt NMC811||graphite coin cells with areal capacities of more than 2.5 milliampere hours per square centimetre retain 75 per cent (54 per cent) of their room-temperature capacity when these cells are charged and discharged at -50 degrees Celsius (-60 degrees Celsius) at a C rate of 0.1C, and the NMC811||graphite pouch cells with lean electrolyte (2.5 grams per ampere hour) achieve stable cycling with an average Coulombic efficiency of more than 99.9 per cent at -30 degrees Celsius. The comprehensive analysis further reveals an impedance matching between the NMC811 cathode and the graphite anode owing to the formation of similar lithium-fluoride-rich interphases, thus effectively avoiding lithium plating at low temperatures. Additionally, this electrolyte design principle can be extended to other alkali-metal-ion batteries operating under extreme conditions.

25 ENERGY STORAGE↗
DOE OSTI2023

All-temperature zinc batteries with high-entropy aqueous electrolyte

Electrification of transportation and rising demand for grid energy storage continue to build momentum around batteries across the globe. However, the supply chain of Li-ion batteries is exposed to the increasing challenges of resourcing essential and scarce materials. Therefore, incentives to develop more sustainable battery chemistries are growing. Here, in this paper, we show an aqueous ZnCl 2 electrolyte with introduced LiCl as supporting salt. Once the electrolyte is optimized to Li 2 ZnCl 4 ∙9H 2 O, the assembled Zn–air battery can sustain stable cycling over the course of 800 hours at a current density of 0.4 mA cm -2 between -60 °C and +80 °C, with 100% Coulombic efficiency for Zn stripping/plating. Even at -60 °C, >80% of room-temperature power density can be retained. Advanced characterization and theoretical calculations reveal a high-entropy solvation structure that is responsible for the excellent performance. The strong acidity allows ZnCl 2 to accept donated Cl - ions to form ZnCl 4 2- anions, while water molecules remain within the free solvent network at low salt concentration or coordinate with Li ions. Our work suggests an effective strategy for the rational design of electrolytes that could enable next-generation Zn batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Hyperconjugation-controlled molecular conformation weakens lithium-ion solvation and stabilizes lithium metal anodes

Tuning the solvation structure of lithium ions via electrolyte engineering has proven effective for lithium metal (Li) anodes. Further advancement that bypasses the trial-and-error practice relies on the establishment of molecular design principles. Expanding the scope of our previous work on solvent fluorination, we report here an alternative design principle for non-fluorinated solvents, which potentially have reduced cost, environmental impact, and toxicity. By studying non-fluorinated ethers systematically, we found that the short-chain acetals favor the [gauche, gauche] molecular conformation due to hyperconjugation, which leads to weakened monodentate coordination with Li + . The dimethoxymethane electrolyte showed fast activation to >99% coulombic efficiency (CE) and high ionic conductivity of 8.03 mS cm -1 . The electrolyte performance was demonstrated in anode-free Cu$∥$LFP pouch cells at current densities up to 4 mA cm -2 (70 to 100 cycles) and thin-Li$∥$high-loading-LFP coin cells (200–300 cycles). Overall, we demonstrated and rationalized the improvement in Li metal cyclability by the acetal structure compared to ethylene glycol ethers. We expect further improvement in performance by tuning the acetal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Optimizing semi-hydrogenation of unsaturated hydrocarbons by electrolyte engineering approach

Electrochemical hydrogenation of unsaturated hydrocarbons, when powered by renewables, represents a unique opportunity to substitute current energy-intensive synthetic routes. Modulation of adsorption energies of the organic substrate and key intermediates of the reaction is critical for fine tuning of the yield, selectivity and kinetics of the reaction. Interestingly, mounting evidence exists regarding the role of electrolyte composition in the outcome of semi-hydrogenation reactions. Nevertheless, electrolyte optimization is a complex task, owing to its hybrid nature. Indeed, it is composed of water serving as a proton source, an organic solvent necessary to dissolve the organic substrate and a conducting salt. Herein, we demonstrate that varying conducting salt and organic solvent has a dramatic impact on the outcomes of semi-hydrogenation of alkynes. By varying salt and water concentrations, we demonstrate that water does not serve as a proton source, and instead addition of an acid is necessary. While increasing the acid concentration increases the yield of the reaction, at too large concentrations the hydrogen evolution reaction becomes predominant. Furthermore, by combining electrochemical measurements with spectroscopic techniques including Fourier transform infrared (FTIR) spectroscopy and small angle X-ray spectroscopy (SAXS), we demonstrate that the electrolyte solvation structure dramatically impacts the yield of the reaction. Organic solvents weakly interacting with water, including acetonitrile, form aqueous nanoheterogeneities that prevent the organic substrate from accessing the catalyst interface and thus lead to limited yields. Instead, solvents such as dimethylformamide form homogeneous mixtures with which all reactants can access the interface, leading to yields greater than 80% for optimized compositions.

Zhang, Rongyu↗
DOE OSTI2025

Molecular engineering of ethereal electrolyte for ultrastable Si-based high voltage full cells

The successful application of Si-based high-energy Li-ion batteries (LIBs) depends on our ability to tailor electrolyte properties to achieve long-term stability and reliable performance. In this work, we demonstrate our rationale for the molecular design of ethereal solvents to address low anodic stability issues and produce a highly electrochemically stable electrolyte for Si‖LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) high-energy full cells. Unlike the trimethylsilyl group, the trifluoromethyl (–CF 3 ) group exerts a very strong electron-withdrawing effect on the glycol ether backbone, reducing the highest occupied molecular orbital (HOMO) energy level of the fluorinated glycol ether (FGE) and significantly enhancing its oxidation potential. The FGE-based electrolyte enables stable cycling of Si‖NMC811 full cells, delivering high specific capacity (900 mA h g −1 ) and coulombic efficiency (>99.78%) over extended (500) cycles. The improved electrochemical performance originates from the terminal fluorination of the diglyme backbone, which strengthens anion coordination in the solvation structure, leading to the preferential reduction of the FSI anion and the formation of robust solid electrolyte interphases (SEIs) on the Si surface. Through molecular engineering of ethereal solvents, we have discovered a promising candidate for a next-generation stable electrolyte, paving the way for the design of practical and commercially viable Si batteries.

Silicon anode↗
DOE OSTI2022

Additives in Localized High Concentration Electrolytes for Safe Lithium-Ion Batteries

In this work, the effects of various additives in a localized high concentration electrolyte (LHCE) on the cycling performance of lithium (Li)-ion batteries were studied. The LHCEs utilize trimethyl phosphate as a flame-retarding solvent and 1H,1H,5H-octafluoropentyl 1,1,2,2-tetrafluoroethyl ether as a medium-high flash point diluent, for the purpose to reduce the electrolyte flammability and improve the battery safety, which are not possessed by the conventional electrolytes of LiPF 6 in organic carbonates due to their high flammability. The LHCEs have unique solvation structure which enables the use of flame-retardant solvents to greatly decrease the electrolyte flammability as well as enhance the battery cycling stability. However, the additives added in the LHCEs result in different battery performances. The organic carbonate additives largely reduce the initial capacities although the cell capacity can be partially recovered with cycling. The two phosphate salt additives behave better than the organic carbonate additives in terms of cell capacity and cycling stability. More cell performance evaluation will be conducted and the detailed characterization will be performed to investigate the root causes of different behaviors of additives in the LHCEs on battery performances.

25 ENERGY STORAGE↗
DOE OSTI2025

Chemical and Optical Control of Spin Crossover: Ultrafast XUV Spectroscopy of Molecular Magnets in Native Solvation Environments

With support from the US Department of Energy Office of Science, we have developed and utilized extreme ultraviolet (XUV) spectroscopy and sum frequency generation vibrational spectroscopy as probes of charge, spin, and solvation structure and dynamics in molecules and at interfaces. This work is crucial to advancing fundamental understanding of the processes that control the efficiency and speed of energy conversion and information processing in molecules and at interfaces. Accordingly, it has important applications for developing next generation technologies for information storage and processing with increasing data storage density and processing rates as well as developing new methods for efficient energy conversion and storage.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Low pH Titanium Electrochemistry in the Presence of Sulfuric Acid and its Implications for Redox Flow Battery Applications

Titanium (Ti) is a promising elemental redox active species for redox flow batteries (RFBs) due to its 100x availability in the Earth crust, and 10x lower cost (compared to elemental vanadium). Furthermore, Ti salts are highly soluble in water and concentrations >5 M can be easily obtained. Seeking to harness the higher solubility (and hence energy density) of the Ti electrolyte for flow battery applications, the Ti 4+ /Ti 3+ redox couple was investigated at high concentrations (up to 5 M) relevant to RFB applications. The behavior of Ti ions in H 2 SO 4 supported electrolytes was investigated by varying the ratio of Ti redox active species to counterion. The electrochemical characteristics, transport properties, and redox kinetics of the Ti 4+ /Ti 3+ redox couple were measured and the impact of the Ti x+ to solvating ligand ratio was examined. The coordination structures around solvated Ti x+ ions were spectroscopically determined and the effect of solvation structure on the Ti 3+ /Ti 4+ redox rate constants were examined and correlated to the calculated solvation energy (hence distinguishing between inner- and outer-sphere processes) and the role of catalysts was addressed. The Ti electrolyte development guidelines presented herein will advance the development of Ti-based RFBs as a promising pathway towards cost effective, grid-scale energy storage.

Electrochemistry↗
DOE OSTI2025

Thermodynamics of calcium binding to heparin: Implications of solvation and water structuring for polysaccharide biofunctions

Heparan sulfates are found in all animal tissues and have essential roles in living systems. This family of biomacromolecules modulates binding to calcium ions (Ca 2+ ) in low free energy reactions that influence biochemical processes from cell signaling and anticoagulant efficacy to biomineralization. Despite their ubiquity, the thermodynamic basis for how heparans and similarly functionalized biomolecules regulate Ca 2+ interactions is not yet established. Using heparosan (Control) and heparins with different positions of sulfate groups, we quantify how SO 3 − and COO − content and SO 3 − position modulate Ca 2+ binding by isothermal titration calorimetry. The free energy of all heparin-Ca2+ interactions (ΔG rxn ) is dominated by entropic contributions due to favorable water release from polar, hydrophilic groups. Heparin with both sulfate esters (O-SO 3 − ) and sulfamides (N-SO 3 − ) has the strongest binding to Ca 2+ compared to heparosan and to heparin with only O-SO 3 − groups (~3X). By linking Ca 2+ binding thermodynamics to measurements of the interfacial energy for calcite (CaCO 3 ) crystallization onto polysaccharides, we show molecule-specific differences in nucleation rate can be explained by differences in water structuring during Ca 2+ interactions. A large entropic term (-TΔS rxn ) upon Ca 2+ –polysaccharide binding correlates with high interfacial energy to CaCO 3 nucleation. Combining our measurements with literature values indicates many Ca 2+ –polysaccharide interactions have a shared thermodynamic signature. The resulting enthalpy–entropy compensation relationship suggests these interactions are generally dominated by water restructuring involving few conformational changes, distinct from Ca 2+ –protein binding. Our findings quantify the thermodynamic origins of heparin-specific interactions with Ca 2+ and demonstrate the contributions of solvation and functional group position during biomacromolecule-mediated ion regulation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Tailored Solvation and Interface Structures by Tetrahydrofuran-Derived Electrolyte Facilitates Ultralow Temperature Lithium Metal Battery Operations

Ineffectiveness of Li-ion batteries (LIBs) in cold climates hinders electronics to work in various conditions including frigid environments, despite high demands. Given that intrinsic properties of LIB materials cause this problem, optimized cell chemistries ultimately are required for low-temperature usage. In this study, Li-metal batteries (LMBs) composed of a Li-metal anode (LMA) stabilized by a localized high-concentration electrolyte (LHCE) are found to significantly enhance low-temperature performance. The LHCE allows the LMA to have compact and regular deposition and excellent plating/stripping efficiency at sub-zero temperatures. The LHCE produces an inorganic-rich solid-electrolyte interphase with larger amounts of Li 2 O/LiF interfaces, dominance of ion aggregates in Li + solvation, and enhanced Li + transport, which can greatly improve the LMA stability. LMB full cells based on LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes with the tailored electrolyte show high retentions of 75 and 64 % at -20 and -40 °C, respectively. Furthermore, the LMB configuration retains its charge-discharge capability even at -60 °C.

25 ENERGY STORAGE↗
DOE OSTI2022

Co-Solvent Electrolyte Engineering for Stable Anode-Free Zinc Metal Batteries

We report anode-free metal batteries can in principle offer higher energy density, but this requires them to have extraordinary Coulombic efficiency (>99.7%). Although Zn-based metal batteries are promising for stationary storage, the parasitic side reactions make anode-free batteries difficult to achieve in practice. In this work, a salting-in-effect-induced hybrid electrolyte is proposed as an effective strategy that enables both a highly reversible Zn anode and good stability and compatibility toward various cathodes. The as-prepared electrolyte can also work well under a wide temperature range (i.e., from -20 to 50 °C). It is demonstrated that in the presence of propylene carbonate, triflate anions are involved in the Zn 2+ solvation sheath structure, even at a low salt concentration (2.14 M). The unique solvation structure results in the reduction of anions, thus forming a hydrophobic solid electrolyte interphase. The waterproof interphase along with the decreased water activity in the hybrid electrolyte effectively prevents side reactions, thus ensuring a stable Zn anode with an unprecedented Coulombic efficiency (99.93% over 500 cycles at 1 mA cm –2 ). More importantly, we design an anode-free Zn metal battery that exhibits excellent cycling stability (80% capacity retention after 275 cycles at 0.5 mA cm –2 ). This work provides a universal strategy to design co-solvent electrolytes for anode-free Zn metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Electrolyte Solvation and Ionic Association: Part IX. Structures and Raman Spectroscopic Characterization of LiFSI Solvates

The bis(fluorosulfonyl)imide anion N(SO 2 F) 2 ⁻ (i.e., FSI⁻) (also referred to as bis(fluorosulfonyl)amide (i.e., FSA-) and imidodi(sulphuryl fluoride)) has attracted tremendous interest in recent years for its utility in both lithium salts and ionic liquids for battery electrolyte applications. To facilitate the understanding of the characteristics of this anion, crystal structures are reported here for the uncoordinated anion in LiFSI-based solvates with cryptand CRYPT-222 and tetraglyme (G4). These crystalline solvates were analyzed by Raman spectroscopy to aid in assigning the Raman bands to the modes of ion coordination found in liquid electrolytes. These structures, as well as a thorough review of other relevant crystallographic data, provide insights into the rather remarkable properties of the FSI- anion with regard to solvate formation and electrolyte properties.

25 ENERGY STORAGE↗
DOE OSTI2022

Control of Structural Hydrophobicity and Cation Solvation on Interlayer Water Transport during Clay Dehydration

Swelling clay hydration/dehydration is important to many environmental and industrial processes. Experimental studies usually probe equilibrium hydration states in an averaged manner and thus cannot capture the fast water transport and structural change in interlayers during hydration/dehydration. Using molecular simulations and thermogravimetric analyses, we observe a two-stage dehydration process. The first stage is controlled by evaporation at the edges: water molecules near hydrophobic sites and the first few water molecules of the hydration shell of cations move fast to particle edges for evaporation. The second stage is controlled by slow desorption of the last 1–2 water molecules from the cations and slow transport through the interlayers. The two-stage dehydration is strongly coupled with interlayer collapse and the coordination number changes of cations, all of which depend on layer charge distribution. Furthermore, this mechanistic interpretation of clay dehydration can be key to the coupled chemomechanical behavior in natural/engineered barriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrolytes with Solvating Inner Sheath Engineering for Practical Na–S Batteries

Sodium–sulfur (Na–S) batteries with durable Na-metal stability, shuttle-free cyclability, and long lifespan are promising to large-scale energy storages. However, meeting these stringent requirements poses huge challenges with the existing electrolytes. Herein, a localized saturated electrolyte (LSE) is proposed with 2-methyltetrahydrofuran (MeTHF) as an inner sheath solvent, which represents a new category of electrolyte for Na–S system. Unlike the traditional high concentration electrolytes, the LSE is realized with a low salt-to-solvent ratio and low diluent-to-solvent ratio, which pushes the limit of localized high concentration electrolyte (LHCE). The appropriate molecular structure and solvation ability of MeTHF regulate a saturated inner sheath, which features a reinforced coordination of Na + to anions, enlarged Na + -solvent distance, and weakened anion-diluent interaction. Such electrolyte configuration is found to be the key to build a sustainable interphase and a quasi-solid–solid sulfur redox process, making a dendrite-inhibited and shuttle-free Na–S battery possible. With this electrolyte, pouch cells with decent cycling performance under rather demanding conditions are demonstrated.

25 ENERGY STORAGE↗