Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simplified Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Enabling Metric-Based Mesh Adaptation for Advanced Compressible Flow Simulations Using US3D

This work presents a metric-based mesh adaptation capability added to the flow solver US3D that is used to improve the accuracy of atmospheric entry simulations. Flow past an entry vehicle in free-flight is usually unsteady and characterized by anisotropic flow features like a strong bow shock and small-scale isotropic flow features like turbulent eddies in the wake. The results presented in this paper demonstrate that we are currently able to iteratively apply metric-based mesh adaptation to improve the solution accuracy by simultaneously targeting isotropic and anisotropic flow features. A simplified workflow of running CFD simulations for entry vehicles is presented where we start off with a coarse initial mesh to compute a first approximation of the flow. This coarse mesh is then iteratively refined using the newly developed metric to improve the resolution of the CFD computation. Furthermore, we demonstrate that we are able to adapt large mesh sizes in a timely fashion which allows us to start thinking about applying this adaptive framework to unsteady atmospheric entry CFD simulations.

Mesh adaptation↗

Predicting Orion Launch Abort Acoustics

Computational fluid dynamics (CFD) scale-resolving simulations were performed to help assess the Orion launch abort system’s vibro-acoustic environment in collaboration with the Orion Loads and Dynamics team at the Johnson Space Center (JSC). The primary objectives are to establish best practices and to validate CFD predictions for surface fluctuating pressure spectra with ground, wind tunnel, and flight test data. Excellent agreement is obtained between CFD predictions by the Cartesian adaptive mesh refinement (AMR) module of the Launch, Ascent, and Vehicle Aerodynamics (LAVA) solver and measurements from a ground test representative of the start of a pad abort scenario, and with measurements from a wind tunnel test case corresponding to a transonic, high total angle of attack ascent abort scenario. A simplified (static and at rest) simulation of a pad abort flight test shows good agreement with the flight data, whereas a more costly simulation where the vehicle is accelerating relative to the ground from rest to Mach 0.4 shows consistent over-prediction of the spectra. Simulation results for a supersonic ascent abort flight test are in reasonable agreement with the measurements, but show larger excursions in regions where non-linear interactions between the plume turbulence, shocks, and turbulent boundary layer are strongest – likely due to CFD modeling assumptions, the effect of which are discussed. Overall, the CFD results demonstrate that scale-resolving simulation methodologies like the one presented can help characterize full-scale launch abort vehicle near-field noise and can complement wind tunnel, ground and flight tests by providing trends and reducing uncertainty for scenarios that cannot or are not planned to be tested.

Orion↗

Generalized environmental control and life support system computer program (G1894), phase 3

The work performed during Phase 3 of the Generalized Environmental Control Life Support System (ECLSS) Computer Program is reported. Phase 3 of this program covered the period from December 1977 to September 1978. The computerized simulation of the Shuttle Orbiter ECLSS was upgraded in the following areas: (1) the payload loop of the Shuttle simulation was completely recoded and checked out; (2) the Shuttle simulation water and freon loop initialization logic was simplified to permit easier program input for the user; (3) the computerized simulation was modified to accept the WASP subroutine, which is a subroutine to evaluate thermal properties of water and freon; (4) the 1108 operating system was upgraded by LEC; (5) the Shuttle simulation was modified to permit failure cases which simulate zero component flow values; and (6) the Shuttle SEPS version was modified and secure files were setup on the 1108 and 1110 systems to permit simulation runs to be made from remote terminals.

Mcenulty, R. E.↗

Hypersonic Vehicle Propulsion System Simplified Model Development

This document addresses the modeling task plan for the hypersonic GN&C GRC team members. The overall propulsion system modeling task plan is a multi-step process and the task plan identified in this document addresses the first steps (short term modeling goals). The procedures and tools produced from this effort will be useful for creating simplified dynamic models applicable to a hypersonic vehicle propulsion system. The document continues with the GRC short term modeling goal. Next, a general description of the desired simplified model is presented along with simulations that are available to varying degrees. The simulations may be available in electronic form (FORTRAN, CFD, MatLab,...) or in paper form in published documents. Finally, roadmaps outlining possible avenues towards realizing simplified model are presented.

Stueber, Thomas J.↗

Clouds and Convective Self-Aggregation in a Multi-Model Ensemble of Radiative-Convective Equilibrium Simulations

The Radiative-Convective Equilibrium Model Intercomparison Project (RCEMIP) is an intercomparison of multiple types of numerical models configured in radiative-convective56equilibrium (RCE). RCE is an idealization of the tropical atmosphere that has long been used to study basic questions in climate science. Here, we employ RCE to investigate the role that clouds and convective activity play in determining cloud feedbacks, climatecsensitivity, the state of convective aggregation, and the equilibrium climate. RCEMIP is unique amongst intercomparisons in its inclusion of a wide range of model types, including atmospheric general circulation models (GCMs), single column models (SCMs), cloud-resolving models (CRMs), large eddy simulations (LES), and global cloud-resolving models (GCRMs). The first results are presented from the RCEMIP ensemble of more than 30 models. While there are large differences across the RCEMIP ensemble in the representation of mean profiles of temperature, humidity, and cloudiness, in a majority of models anvil clouds rise, warm, and decrease in area coverage in response to an increase in sea surface temperature (SST). Nearly all models exhibit self-aggregation in large domains and agree that self-aggregation acts to dry and warm the troposphere, reduce high cloudiness, and increase cooling to space. The degree of self-aggregation exhibits no clear tendency with warming. There is a wide range of climate sensitivities, but models with parameterized convection tend to have lower climate sensitivities than models with explicit convection. In models with parameterized convection, aggregated simulations have lower climate sensitivities than un-aggregated simulations. Plain Language Summary This study investigates tropical clouds and climate using results from more than 30 different numerical models set up in a simplified framework. The dataset of model simulations is unique in that it includes a wide range of model types configured in a consistent manner. We address some of the biggest open questions in climate science, including how cloud properties change with warming and the role that the tendency of clouds to form clusters plays in determining the average climate and how climate changes. While there are large differences in how the different models simulate average temperature, humidity, and cloudiness, in a majority of models, the amount of high clouds decreases as climate warms. Nearly all models simulate a tendency for clouds to cluster together. There is agreement that when the clouds are clustered, the atmosphere is drier with fewer clouds overall. We don’t find a conclusive result for how cloud clustering changes as the climate warms.

Allison A. Wing↗

Hybrid Simulation of Solar-Wind-Like Turbulence

We present 2.5D hybrid simulations of the spectral and thermodynamic evolution of an initial state of magnetic field and plasma variables that in many ways represents solar wind fluctuations. In accordance with Helios near-Sun high-speed stream observations, we start with Alfvénic fluctuations along a mean magnetic field in which the fluctuations in the magnitude of the magnetic field are minimized. Since fluctuations in the radial flow speed are the dominant free energy in the observed fluctuations, we include a field-aligned v∥(k⊥) with an k(exp −1) spectrum of velocity fluctuations to drive the turbulent evolution. The flow rapidly distorts the Alfvénic fluctuations, yielding spectra (determined by spacecraft-like cuts) transverse to the field that become comparable to the k∥ fluctuations, as in spacecraft observations. The initial near constancy of the magnetic field is lost during the evolution; we show this also takes place observationally. We find some evolution in the anisotropy of the thermal fluctuations, consistent with expectations based on Helios data. We present 2D spectra of the fluctuations, showing the evolution of the power spectrum and cross-helicity. Despite simplifying assumptions, many aspects of simulations and observations agree. The greatly faster evolution in the simulations is at least in part due to the small scales being simulated, but also to the non-equilibrium initial conditions and the relatively low overall Alfvénicity of the initial fluctuations.

Roberts, D. Aaron↗

Soil Moisture Active/Passive (SMAP) Forward Brightness Temperature Simulator

The SMAP is one of four first-tier missions recommended by the US National Research Council's Committee on Earth Science and Applications from Space (Earth Science and Applications from Space: National Imperatives for the Next Decade and Beyond, Space Studies Board, National Academies Press, 2007) [1]. It is to measure the global soil moisture and freeze/thaw from space. One of the spaceborne instruments is an L-band radiometer with a shared single feedhorn and parabolic mesh reflector. While the radiometer measures the emission over a footprint of interest, unwanted emissions are also received by the antenna through the antenna sidelobes from the cosmic background and other error sources such as the Sun, the Moon and the galaxy. Their effects need to be considered accurately, and the analysis of the overall performance of the radiometer requires end-to-end performance simulation from Earth emission to antenna brightness temperature, such as the global simulation of L-band brightness temperature simulation over land and sea [2]. To assist with the SMAP radiometer level 1B algorithm development, the SMAP forward brightness temperature simulator is developed by adapting the Aquarius simulator [2] with necessary modifications. This poster presents the current status of the SMAP forward brightness simulator s development including incorporating the land microwave emission model and its input datasets, and a simplified atmospheric radiative transfer model. The latest simulation results are also presented to demonstrate the ability of supporting the SMAP L1B algorithm development.

Peng, Jinzheng↗

Simplified ISCCP Cloud Regimes for Evaluating Cloudiness in CMIP5 Models

We take advantage of the ISCCP simulator implemented in many CMIP5 models, in order to introduce a credible method to compare model cloud output with corresponding ISCCP observations based on the cloud regime (CR) concept. A novel simplified CR derivation method is introduced that exploits the co-variations of three variables, cloud optical thickness, cloud top pressure and cloud fraction (, pc, CF). Following evaluation criteria established in a previous paper of ours, we assess model cloud simulation performance based on how well the simplified CRs are simulated in terms of similarity of centroids, global values and map correlations of relative frequency-of-occurrence (RFO), and long term total clouds amounts (as opposed to average instantaneous cloud fractions). Mirroring prior results, modeled clouds tend to be too thick optically and not as extensive as in observations. Averaging across models does not help in this or other evaluation aspects, except for cloud geographical locations. A good model for one criterion is usually found to be also a good performer for other criteria despite plenty of exceptions for the criterion of centroid similarity. On the other hand, CRs that include convectively generated high-altitude clouds are not as well simulated here compared to the previous study, but other regimes containing low clouds with high CF improve. Models that have previously performed well distinguish themselves again here, but improvements from other models are also found. The simplified cloud evaluation method thus proves to be more forgiving while still good enough to reveal model weaknesses.

global climate models↗

Structure and equilibrium of coronal magnetic fields

In 'closed' magnetic structures (i.e., coronal loops) the random shuffling of magnetic footpoints in the photosphere causes twisting and braiding of field lines in the corona. If the motions are sufficiently slow, the coronal field evolves through a sequence of force-free equilibrium states. Numerical simulations are presented for a simplified model in which the overall curvature of the coronal loop is neglected. It is shown that magnetic fine structures develop on spatial scales significantly smaller than those of the imposed 'photospheric' velocity field.

Van Ballegooijen, A. A.↗

Approximate optimal guidance for the advanced launch system

A real-time guidance scheme for the problem of maximizing the payload into orbit subject to the equations of motion for a rocket over a spherical, non-rotating earth is presented. An approximate optimal launch guidance law is developed based upon an asymptotic expansion of the Hamilton - Jacobi - Bellman or dynamic programming equation. The expansion is performed in terms of a small parameter, which is used to separate the dynamics of the problem into primary and perturbation dynamics. For the zeroth-order problem the small parameter is set to zero and a closed-form solution to the zeroth-order expansion term of Hamilton - Jacobi - Bellman equation is obtained. Higher-order terms of the expansion include the effects of the neglected perturbation dynamics. These higher-order terms are determined from the solution of first-order linear partial differential equations requiring only the evaluation of quadratures. This technique is preferred as a real-time, on-line guidance scheme to alternative numerical iterative optimization schemes because of the unreliable convergence properties of these iterative guidance schemes and because the quadratures needed for the approximate optimal guidance law can be performed rapidly and by parallel processing. Even if the approximate solution is not nearly optimal, when using this technique the zeroth-order solution always provides a path which satisfies the terminal constraints. Results for two-degree-of-freedom simulations are presented for the simplified problem of flight in the equatorial plane and compared to the guidance scheme generated by the shooting method which is an iterative second-order technique.

Feeley, T. S.↗

Modeling the decay of energy containing eddies: A source of solar wind heating

To understand the solar wind heating and acceleration mechanisms one needs to understand the decay of energy containing eddies. With this goal in mind, attempts have been made to extend the fluid dynamic phenomenology of large scale quasi-equilibrium to the case of magnetohydrodynamics. Matthaeus et al. have proposed a model for the inhomogeneous transport and decay of five mean variables, namely, two mean square Elsasser variables z(exp 2) (sub +/-) their correlation lengths, and the difference between the kinetic and magnetic energies. We test the validity of this model in the simplified case of homogeneous turbulence simulated in a periodic box. We propose a class of models and show that they may fit the simulation satisfactorily. Analytic solutions of this class of model reveal their inherent properties and demonstrate the difficulties associated with finite cross helicity. It is noted that adjustments are required to make the simplest models, which are based upon isotropic turbulence, scale properly with respect to the strength of the mean magnetic field. This can be interpreted as due to anisotropic turbulence, which can be modelled by simple parameterization in the phenomenology.

Hossain, M.↗

LES on unstructured deforming meshes: Towards reciprocating IC engines

A variable explicit/implicit characteristics-based advection scheme that is second-order accurate in space and time has been developed recently for unstructured deforming meshes (O'Rourke & Sahota 1996a). To explore the suitability of this methodology for Large-Eddy Simulation (LES), three subgrid-scale turbulence models have been implemented in the CHAD CFD code (O'Rourke & Sahota 1996b): a constant-coefficient Smagorinsky model, a dynamic Smagorinsky model for flows having one or more directions of statistical homogeneity, and a Lagrangian dynamic Smagorinsky model for flows having no spatial or temporal homogeneity (Meneveau et al. 1996). Computations have been made for three canonical flows, progressing towards the intended application of in-cylinder flow in a reciprocating engine. Grid sizes were selected to be comparable to the coarsest meshes used in earlier spectral LES studies. Quantitative results are reported for decaying homogeneous isotropic turbulence, and for a planar channel flow. Computations are compared to experimental measurements, to Direct-Numerical Simulation (DNS) data, and to Rapid-Distortion Theory (RDT) where appropriate. Generally satisfactory evolution of first and second moments is found on these coarse meshes; deviations are attributed to insufficient mesh resolution. Issues include mesh resolution and computational requirements for a specified level of accuracy, analytic characterization of the filtering implied by the numerical method, wall treatment, and inflow boundary conditions. To resolve these issues, finer-mesh simulations and computations of a simplified axisymmetric reciprocating piston-cylinder assembly are in progress.

Haworth, D. C.↗

Melt Convection Effects in the Bridgman Crystal Growth of an Alloy Under Microgravity Conditions

The solidification of a dilute bismuth-tin alloy under Bridgman crystal growth conditions is investigated in support of NASA's MEPHISTO space shuttle flight experiment. Computations are performed in two-dimensions with a uniform grid. The simulation includes the species-concentration, temperature and flow fields, as well as conduction in the ampoule. Fully transient simulations have been performed; no simplifying steady state approximations are used. Results are obtained under microgravity conditions for pure bismuth, and Bismuth-0.1 at.% Sn and Bi-1.0 at.% Sn alloys. The concentration dependence of the melting temperature is neglected; the solid/liquid interface temperature is assumed to be the melting temperature of pure bismuth for all cases studied. For the Bi-1.0 at.% Sn case the results indicate that a secondary convective cell, driven by solutal gradients, forms near the interface. The magnitude of the velocities in this cell increases with time; this causes increasing solute segregation at the liquid/solid interface.

Simpson James E.↗

Numerical Simulations of Crystal Growth of an Alloy Under Microgravity Conditions

The directional solidification of a dilute binary alloy (Bi-1.0 at.%Sn)is investigated. Results are obtained at a gravity level of I pg. Computations are performed in two dimensions with a fixed, non-uniform grid. The simulation involves a solution of the species concentration equation (modified to account for solute rejection at the interface) and energy equation (modified to account for phase-change) for both the solid and liquid phases, in addition to the constitutive equations for describing convective flow in the melt. The effects of conductive heat transfer in the ampoule and in a capillary tube in the sample are included. To gauge the effects of including this growth capillary tube in the apparatus, simulations both with and without the capillary tube are presented and compared. Fully transient simulations have been performed; no simplifying steady-state approximations are used, however, the influence of solute on the melting temperature at the interface is not included. Both thermal and solutal convective cells are seen to form. Convective velocities are significantly damped inside the capillary, causing less segregation due to convection. As solidification proceeds beyond the capillary tube, longitudinal segregation arises as a result of the change in cross-sectional area of solidifying material. The magnitudes of the velocities in this cell increase significantly once the solid/liquid front passes beyond the end of the capillary tube; this causes a corresponding increase in the level of radial solute segregation in the solidified material.

Simpson, James E.↗

Let Dependent Low Dose and Synergistic Inhibition of Human Angiogenesis by Charged Particles: Validation of Micrornas That Drive Inhibition

The microvasculature permeates all tissues at the microscopic level making the whole body a target for Space Radiation. Depending on the trajectory a single heavy ion particle would traverse many micro-vessels as it passes through the body causing a widespread response. Studies on the effects of charged particles on the development of human 3D micro-vessel models show that angiogenesis is inhibited by all ions detectible at a dose of 1.25c Gy. However, there are two distinct mechanisms of inhibition depending on the linear energy transfer (LET). We show here that the inhibition of angiogenesis is demarcated into two groups. The blockage of the early motile stage of micro-vessel development occurs after exposure to light ions (LET 3 KeV/n or lower) whereas the prevention of the later stages of development when the microvessels widen into tubes occurs after exposure to heavy ions (LET 8 KeV/n or higher). Strikingly, the combined effect of each ion has a synergistic effect detectible as low as 0.6 cGy. The low fluence of these doses indicates a bystander effect where the response is transmitted to other cells by the secretion of molecules by targeted cells. Prime candidates are microRNAs (miRNAs) and we have previously identified three angiogenesis-associated miRNA regulators from serum, cardiac tissue, and micro-vessels exposed to a simplified Galactic Cosmic Radiation (GCR) simulation – a mixture of heavy and light ions found in Space. Synthetic molecules (Antagomirs) designed to inhibit the predicted miRNAs were successfully used to reverse the inhibition of angiogenesis by Space Radiation. With the simple application of the antagomirs as a countermeasure we have for the first time shown an amelioration of the complex response(s) of angiogenesis to Space Radiation. This opens a new avenue of possible mitigation strategies based on the regulation and understanding of master regulators. These results not only have impact with Space Radiation research, but also provide clues of possible therapeutics for terrestrial diseases in the clinical setting.

Yen-Ruh Wuu↗

Go-Around Criteria Refinement for Transport Category Aircraft

Presently, airline pilots are trained to go around if, when lower than 500 ft above the ground, they are outside of a handful of parameters such as airspeed, position, and rate of descent. At times, pilots do not comply with these criteria, perhaps owing to their conservative nature or complexity. This paper examines potential refinements to the continue-to-land decision from the combined results of three flight simulator experiments. Potential refinements include simplifying the number of parameters and lowering the altitude at which pilots make the decision. First, refinements were developed by evaluating pilots’ touchdown performance and qualitative data in a variety of starting and environmental conditions. Second, 30 of those pilots evaluated the refinements under several induced instabilities during the approach. The results showed little difference in touchdown performance when lowering the decision altitude from 500 to 300 ft; however, significant differences arose when the decision altitude was lowered further to 100 ft. The proposed new criteria include assessments of deviations in airspeed and position, no rate-of-descent audio warning, and having an appropriate engine setting at 1000, 500, and 300 ft height above threshold. Additionally, a recommendation is made that if the proposed criteria are not met at the 1000 or 500 ft height above threshold the pilots may make corrections and continue the approach; however, if the criteria are not met at 300 ft, then a go-around should be performed.

stabilized approach criteria↗

Comparison of human driver dynamics in simulators with complex and simple visual displays and in an automobile on the road

As part of a comprehensive program exploring driver/vehicle system response in lateral steering tasks, driver/vehicle system describing functions and other dynamic data have been gathered in several milieu. These include a simple fixed base simulator with an elementary roadway delineation only display; a fixed base statically operating automobile with a terrain model based, wide angle projection system display; and a full scale moving base automobile operating on the road. Dynamic data with the two fixed base simulators compared favorably, implying that the impoverished visual scene, lack of engine noise, and simplified steering wheel feel characteristics in the simple simulator did not induce significant driver dynamic behavior variations. The fixed base vs. moving base comparisons showed substantially greater crossover frequencies and phase margins on the road course.

Mcruer, D. T.↗

Electromagnetic Launch Vehicle Fairing and Acoustic Blanket Model of Received Power Using FEKO

Evaluating the impact of radio frequency transmission in vehicle fairings is important to electromagnetically sensitive spacecraft. This study employs the multilevel fast multipole method (MLFMM) from a commercial electromagnetic tool, FEKO, to model the fairing electromagnetic environment in the presence of an internal transmitter with improved accuracy over industry applied techniques. This fairing model includes material properties representative of acoustic blanketing commonly used in vehicles. Equivalent surface material models within FEKO were successfully applied to simulate the test case. Finally, a simplified model is presented using Nicholson Ross Weir derived blanket material properties. These properties are implemented with the coated metal option to reduce the model to one layer within the accuracy of the original three layer simulation.

Trout, Dawn H.↗