Production of Metal Foil and Flat Wire by Single Step Shear-Based Deformation Processing
Explore the source record for details and available documents.
24 POWER TRANSMISSION AND DISTRIBUTION↗
SEARCH · Engineering Papers
Results for “Shear deformation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Production of Metal Foil and Flat Wire by Single Step Shear-Based Deformation Processing
Explore the source record for details and available documents.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Insight into ideal shear strength of Ni-based dilute alloys using first-principles calculations and correlational analysis
Here the present work examines the effect of alloying elements (denoted X) on the ideal shear strength for 26 dilute Ni-based alloys, Ni11X, as determined by first-principles calculations of pure alias shear deformations. The variations in ideal shear strength are quantitatively explored with correlational analysis techniques, showing the importance of atomic properties such as size and electronegativity. The shear moduli of the alloys are affirmed to show a strong linear relationship with their ideal shear strengths, while the shear moduli of the individual alloying elements were not indicative of alloy shear strength. Through combination with available ideal shear strength data on Mg alloys, a potential application of the Ni alloy data is demonstrated in the search for a set of atomic features suitable for machine learning applications to mechanical properties. As another illustration, the calculated Ni ideal shear strengths play a key role in a predictive multiscale framework for deformation behavior of single crystal alloys at large strains, as shown by simulated stress–strain curves.
36 MATERIALS SCIENCE↗
Bending and shear improvements in 3D-printed core sandwich composites through modification of resin uptake in the skin/core interphase region
Fused deposition modeling (FDM) printed polymers are rarely used as a structural material due to anisotropic and low mechanical properties compared with conventional composites. In recent years, greater need has been expressed for recycling of materials, such as recyclable FDM, at the end of service life to reduce environmental pollution and manufacture cost. However, how the amount of resin uptake in the skin and skin/core interphase affects the bending and shear performance of the sandwich composites when replacing the low strength and ductile core (conventional core) with a high strength and brittle core (FDM printed PLA (polylactic acid) core) still remains unclear. A new manufacturing routine is needed to improve the incorporation of FDM printed polymers in composite structures. In this work, FDM printed PLA was used as core material and sandwiched between two unidirectional glass fiber reinforced polymer (GFRP) skins to form a sandwich composite by compression-molding (CM) process, which provides a good manufacturing strategy for skin/core interphase modification. The significance of the CM process is proved by investigating the effect of resin uptake on bending and in-plane/out-of-plane shear performances. Current first order shear deformation (FSDT) theory lacks a direct connection between the in-plane shear stress and out-of-shear stress in the core region of sandwich composites. With the help of DIC, a connection between the in-plane shear and the out-of-plane shear strain was built and in-plane shear properties can acquire through out-of-plane shear properties, hence reducing the redundancy of sample preparation or the need for simulation. A significant improvement was found compared with the optimized resin uptake (Optimized resin uptake range: 20.43%–22.86 wt%) 3D-printed PLA core sandwich composite and lowest performance sandwich composite (Improvement: in-plane shear strength (~34%)/modulus (~29%), out-of-plane shear strength (~25%)/modulus (~31%), specific peak bending load (~19%)). Finally, compared with balsa core sandwich composites, the 3D-printed cores are suitable for use in composite sandwich structures in many applications with a satisfactory strength-to-weight ratio.
3D-printed core sandwich composite↗
Refined Zigzag Theory for Laminated Composite and Sandwich Plates
A refined zigzag theory is presented for laminated-composite and sandwich plates that includes the kinematics of first-order shear deformation theory as its baseline. The theory is variationally consistent and is derived from the virtual work principle. Novel piecewise-linear zigzag functions that provide a more realistic representation of the deformation states of transverse-shear-flexible plates than other similar theories are used. The formulation does not enforce full continuity of the transverse shear stresses across the plate s thickness, yet is robust. Transverse-shear correction factors are not required to yield accurate results. The theory is devoid of the shortcomings inherent in the previous zigzag theories including shear-force inconsistency and difficulties in simulating clamped boundary conditions, which have greatly limited the accuracy of these theories. This new theory requires only C(sup 0)-continuous kinematic approximations and is perfectly suited for developing computationally efficient finite elements. The theory should be useful for obtaining relatively efficient, accurate estimates of structural response needed to design high-performance load-bearing aerospace structures.
Tessler, Alexander↗
Influence of alkali-silica reaction on the shear capacity of reinforced concrete beams with minimum transverse reinforcement
A growing number of critical concrete infrastructure are affected by alkali-silica reaction (ASR) damage such as the Seabrook Nuclear Power Plant in New Hampshire, Parker arch-gravity dam in Arizona, and several highway bridges in California and Texas. ASR causes expansion and cracking and degrades the concrete mechanical properties. Despite a wealth of material level studies there is still limited large-scale experimental data regarding the effects of ASR on reinforced concrete (RC) members. Due to the brittle nature of the shear failure in RC structures, this study focuses on the shear response of full-scale ASR damaged RC beams with minimum shear reinforcement. Six RC beams were built with different levels of ASR susceptibility and conditioned in different environments during which continuous expansion monitoring was performed. The beams all contained reactive fine aggregate (sand) and two of them had additional alkali, 1.25% by weight of cement, to accelerate ASR. The highest expansion rate of the beams happened during the first 150 days and the expansions stayed constant after 240 days and 330 days for beams conditioned in outdoor and laboratory conditions, respectively, until the last measurement at 575 days. The highest expansion, 0.4%, was seen in the beams with additional alkali and conditioned outside with regular water spray. Out of the six beams, three were selected at different levels of ASR damage and two shear tests were performed on the minimally reinforced spans close to the ends of each beam. Results indicated that beams gain shear strength from ongoing cement hydration in the presence of moisture for ASR expansions less than 0.2%. Compared to one of the beams with 0.2% ASR expansion, one of the other samples with 0.4% expansion lost 6% of its shear strength, 25% of its shear stiffness, and showed about two times larger shear cracks and shear deformations at peak load. Finally, the shear reinforcement yielded at 20% less load in the beam with 0.4% expansion compared to the beam with 0.2% expansion.
42 ENGINEERING↗
Retrograde, charnockite- gneiss relations in Southern India
The high-pressure charnockites (P = 8 to 9 Kb., T = 700 to 800 C CO2-rich fluid regime) of the Nilgiri hills show evidence of retrogression related to shear deformation within the Moyar and Bhavani shear belts. Two types of retrogression have been noticed: (1) retrogression along shear planes, and (2) retrogression along pegmatitic veins. Initial stages of retrogression results in the formation of irregular, 2 to 3 cm to one meter wide bleached zones with the removal of greasy grey color of charnockites. Minor structures which were earlier obscured in charnockites are clearly seen in bleached areas. In intensely shear areas, formation of highly fissile grey gneiss results often with the development of flaser and mylonitic structures. Fluid inclusion studies and geochemical investigations carried out for serial samples collected from charnockite to gneiss indicate following features: (1) there is a gradual decrease in density of CO2-rich fluids from 1.073 to 0.821 g/cu cm; (2) interestingly, in many sections of the gneisses studied, there is almost complete absence of fluid inclusions suggesting that they would have decrepitated (this may be due to large pressure difference (2 to 3 Kb.) created between the interior and exterior of the fluid inclusions); and (3) presence of mixed CO2-H2O inclusions were noticed.
Srikantappa, C.↗
Natural vibrations of laminated anisotropic plates using three-dimensional elasticity theory
The paper contains a description of the three-dimensional elasticity equations and the associated finite element model for natural vibrations of laminated anisotropic rectangular plates. The numerical results for natural frequencies are compared with those obtained by a shear deformable plate theory. A number of cross-ply and angle-ply rectangular plates are analyzed for natural frequencies. For relatively thick plates, the shear deformable-plate theory element predicts frequencies higher than those predicted by the three-dimensional elasticity theory element.
Reddy, J. N.↗
Microstructure and texture evolution of friction stir lap welded dissimilar multi-aluminum stack
Here this work investigates the microstructural evolution of a dissimilar multiple-aluminum alloy stack (AA7055, AA7055, AA6022) produced by friction stir lap welding (FSLW). A through-thickness analyses of grain orientation map, grain size and distribution, strain distribution, and texture evolution by electron backscattered diffraction-based characterization technique were performed. Two different welding parameters (combination of tool rotation and traverse speed) were used to study the effects of the welding parameters on these microstructural characteristics. The study shows that higher welding speed and higher rotation speed of the FSLW tool yield finer grains. FSLW resulted in shear texture formation in the weld regions due to high welding speeds. This texture development in the nugget zone is consistent with shear deformation, and (111) pole figures show ideal shear texture components. The Stir Zone (SZ) exhibits shear texture (A/A ̅ and B/B ̅ components), consistent with other shear-assisted processes. Recrystallization mechanisms observed are CDRX in SZ and DDRX in TMAZ (Thermo-Mechanically Affected Zone). Interface analysis reveals the presence of oxide layers between different aluminum sheets, affecting joint mechanical performance. The mechanical property of the lap welded joints was presented in terms of microhardness distribution across the weld cross section. Slightly higher hardness in higher speed welding setup was observed throughout the SZ and AA6022 layer, indicating greater grain refinement and uniform grain structure distribution.
36 MATERIALS SCIENCE↗
Flexure-torsion behavior of sheat-deformable beams with applications to aircraft wing sections
The flexure-torsion behavior of a tip-loaded cantilever beam with an arbitrary cross-section is studied using Saint-Venant's semi-inverse method along with a power series solution for the out-of-plane flexure and torsion warping functions. The power series coefficients are determined by solving a set of variationally derived linear algebraic equations. For complex cross-sections, the calculated coefficients represent a 'best-fit approximation' to the exact warping function. The resulting warping functions are used to determine the cross-section properties including: the torsion constant, shear deformation coefficients, shear correction factors, and the shear center location. A new linear relation is developed for locating the shear center using the Saint-Venant flexure and torsion solutions, where the twist rate is zero about the line of shear centers (not the centroidal axis). Numerical results are presented for a triangular cross-section and different NACA airfoils.
Kosmatka, J. B.↗
Thermomechanical buckling of multilayered composite panels with cutouts
A study is made of the thermomechanical buckling of flat unstiffened composite panels with central circular cutouts. The panels are subjected to combined temperature changes and applied edge loading (or edge displacements). The analysis is based on a first-order shear deformation plate theory. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the plate. Both the stability boundary and the sensitivity coefficients are evaluated. The sensitivity coefficients measure the sensitivity of the buckling response to variations in the different lamination and material parameters of the panel. Numerical results are presented showing the effects of the variations in the hole diameter, laminate stacking sequence, fiber orientation, and aspect ratio of the panel on the thermomechanical buckling response and its sensitivity coefficients.
THERMOMECHANICAL BUCKLING↗
Graph-component approach to defect identification in large atomistic simulations
In this work, the graph-theoretical concept of connected components is employed to extract the evolution of defect configurations in a polycrystalline aluminum structure containing ~8.3 million atoms. This graph-component approach is applied to reveal details of defect formation, transport, and transformation in the polycrystalline Al under large shear deformation. Building upon standard nearest neighbor analysis, graph theory and associated tools are used to reduce the multi-million-atom system into discrete component subgraphs that represent distinct structural defects. This method allows the automated identification, characterization, and tracking of defective regions within large volumes of data representing atomic-scale processes. Such analysis elucidates relationships between external stimuli, such as strain, and defect distributions, which have a large influence on material properties. The Graph Analytics for Large Atomistic Simulations (GALAS) codebase that implements this analysis, together with user guidance, is openly available at https://github.com/pnnl/galas.
36 MATERIALS SCIENCE↗
In situ temperature measurement of a deforming interface with thermoelectricity
Accurate temperature measurement is critical to understanding the thermomechanical conditions and microstructural evolution that materials experience during severe plastic deformation (SPD). Others have previously measured the interface between a non-deforming tool and metal workpiece using thermocouples, infrared measurement, and the thermoelectric principle. Measuring temperature within the deforming material itself, especially at a high-shear deforming interface, has proven to be extremely difficult, thus limiting the application of these measurements to fundamental SPD research. In this study, the thermoelectric principle is used to directly measure temperature at the interface between copper and nickel billets undergoing SPD. This is done by utilizing the deforming materials themselves as two halves of a thermocouple junction. The spatial resolution of this measurement is shown via microscopy to be less than 1 micron. Temperature changes are sensed almost instantly, with time delays on the order of the data logger frequency (0.01 seconds). Process variations that are both very brief (<0.05 seconds) and minute (<3°C) are able to be detected by this method.
Taysom, Brandon Scott↗
Pattern formation on free surfaces via plastic buckling and periodic folding
Spontaneous formation of surface patterns such as folds and creases is widely observed in engineered systems, such as thin films and machined surfaces, as well as in natural systems such as floral petals and leaves. A recognized route for their formation is via surface elastic instabilities. Here we demonstrate an alternate route for their formation —plastic buckling and folding—that occurs when ductile materials are subject to large-strain (>1) deformation. Using in situ imaging of simple-shear deformation of polypropylene, we delineate the mechanics underlying formation of folds and the resulting surface morphology. Here, the fold pattern shows a single wavelength that scales linearly with the size of the plastic zone. An analytical model predicts onset of the plastic buckling instability and characteristics of the folds. Besides obvious applications for controllably generating surface features over large areas, our results suggest a contributing mechanism for origin of surface roughness in solids.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Vibration and damping of laminated, composite-material plates including thickness-shear effects
An analytical investigation of sinusoidally forced vibration of laminated, anisotropic plates including bending-stretching coupling, thickness-shear flexibility, all three types of inertia effects, and material damping is presented. In the analysis the effects of thickness-shear deformation are considered by the use of a shear correction factor K, analogous to that used by Mindlin for homogeneous plates. Two entirely different approaches for calculating the thickness-shear factor for a laminate are presented. Numerical examples indicate that the value of K depends on the layer properties and the stacking sequence of the laminate.
Bert, C. W.↗
Sensitivity analysis for the dynamic response of viscoplastic shells of revolution
A computational procedure is presented for evaluating the sensitivity coefficients of the dynamic axisymmetric response of viscoplastic shells of revolution. The analytical formulation is based on Reissner's large deformation shell theory with the effects of transverse shear deformation, rotatory inertia and moments turning around the normal to the middle surface included. The material model is chosen to be isothermal viscoplasticity, and an associated flow rule is used with a von Mises effective stress. A mixed formulation is used with the fundamental unknowns consisting of six stress resultants, three generalized displacements and three velocity components. Spatial discretization is performed using finite elements, with discontinuous stress resultants across element interfaces. The temporal integration is performed by using an explicit central difference scheme (leap-frog method) with an implicit constitutive update. The sensitivity coefficients are evaluated using a direct differentiation approach. Numerical results are presented for a spherical cap subjected to step loading, and a circular plate subjected to impulsive loading. The sensitivity coefficients are generated by evaluating the derivatives of the response quantities with respect to thickness, mass density, Young's modulus, and two of the material parameters characterizing the viscoplastic response. Time histories of the response and sensitivity coefficients are presented, along with spatial distributions of these quantities at selected times.
Kulkarni, Makarand↗
Toughening mechanism in elastometer-modified epoxy resins: Part 1
Several plaques of Epon 828, cured with piperidine, modified with hycar(r) CTBN 1300X8, Hycar(R) CTBN 1300X13, and Hycar(R) CTBN 1300x15, and in some cases modified with biphenol A (BPA), yielded properly toughened epoxies with rubber particle diameters ranging from 0.1 to 10 microns. Fracture toughness experiments indicate that toughness was more a function of rubber content than the rubber particle size. Tensile volumetric behavior of the near resin exhibits two regions: an initial region where the increase in volume strain was due to the Poisson's effect, and a second region where a slower rate of increase in volume strain was due to shear deformation. Tensile volumetric deformation of an elastomer-modified epoxy exhibits the same type of behavior to that of the neat resin at low rates ( 3.2x0.01 sec(-1)). But at very high strain rates, which correspond more closely to the strain rates at the crack tip, there exists an increase in volume strain beyond the Poisson's effect. TEM, SEM and OM studies indicate that the rubber particles had voided. When a thin section from the deformed region is viewed under crossed-polarized light, shear bands are seen connecting voided rubber particles. From this information cavitation and enhanced shear band formation is proposed as the toughening mechanism.
Yee, A. F.↗
A high order theory for uniform and laminated plates
A theory of plate deformation is derived which accounts for the effects of transverse shear deformation, transverse normal strain, and a nonlinear distribution of the in-plane displacements with respect to the thickness coordinate. The theory is compared with lower order plate theories through application to a particular problem involving a plate acted upon by a sinusoidal surface pressure. Comparison is also made with exact elasticity solution of this problem. It is found that when the ratio of the characteristic length of the load pattern to the plate thickness is of the order of unity, lower order theories are inadequate and the present high order theory is required to give meaningful results. Results are given for the bending of symmetric cross-ply and angle-ply laminates. Comparison with exact elasticity solutions indicates that the present plate theory is sufficiently accurate for predicting the behavior of thick laminates.
Lo, K. H.↗