SEARCH · Engineering Papers

Results for “Secondary wall”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Identification and characterization of deep nitrogen acceptors in β-Ga 2 O 3 using defect spectroscopies

The ability to achieve highly resistive beta-phase gallium oxide (β-Ga 2 O 3 ) layers and substrates is critical for β-Ga 2 O 3 high voltage and RF devices. To date, the most common approach involves doping with iron (Fe), which generates a moderately deep acceptor-like defect state located at E C -0.8 eV in the β-Ga 2 O 3 bandgap. Recently, there has been growing interest in alternative acceptors, such as magnesium (Mg) and nitrogen (N), due to their predicted deeper energy levels, which could avoid inadvertent charge modulation during device operation. In this work, a systematic study that makes direct correlations between the introduction of N using ion implantation and the observation of a newly observed deep level at E C -2.9 eV detected by deep-level optical spectroscopy (DLOS) is presented. The concentration of this state displayed a monotonic dependence with N concentration over a range of implant conditions, as confirmed by secondary ion mass spectrometry (SIMS). With a near 1:1 match in absolute N and E C -2.9 eV trap concentrations from SIMS and DLOS, respectively, which also matched the measured removal of free electrons from capacitance-voltage studies, this indicates that N contributes a very efficiently incorporated compensating defect. Density functional theory calculations confirm the assignment of this state to be an N (0/-1) acceptor with a configuration of N occupying the oxygen site III [N O(III) ]. The near ideal efficiency for this state to compensate free electrons and its location toward the midgap region of the β-Ga 2 O 3 bandgap demonstrates the potential of N doping as a promising approach for producing semi-insulating β-Ga 2 O 3 .

36 MATERIALS SCIENCE↗

DOE OSTI2025

General kinetic ion-induced electron emission model for metallic walls applied to biased Z-pinch electrodes

A kinetic ion-induced electron emission (IIEE) model for general applications is developed to obtain the emitted electron energy spectrum for a distribution of ion impacts on a metallic surface. We assume an ionization cascade mechanism and use empirical models for the ion and electron stopping powers. The emission spectrum and the secondary electron yield (SEY) are validated for a variety of materials. The IIEE model is used to study the effect of IIEE on the plasma-material interactions of Z-pinch electrodes. Un-magnetized Boltzmann-Poisson simulations are performed for a Z-pinch plasma doubly bounded by two biased copper electrodes with and without IIEE at bias potentials from 0 to 9 kV. At the anode, the SEY decreases from 0 to 1 kV, but then increases at higher bias potentials. At the cathode, the SEY is much larger due to higher energy ion bombardment and grows with bias potential. As the bias potential increases, the emitted cathode electrons are accelerated to higher energies into the domain, collisionally heating the plasma. Above 1 kV, the heating is strong enough to increase the plasma potential. Despite SEY greater than 1, only a classical sheath forms as opposed to a space-charge limited or inverse sheath due to the emitted electron flux not reaching the space charge current saturation limits. Furthermore, the current in the emissionless cases saturates to a value lower than experiment. With IIEE, the current does not saturate and continues to increase with the 4 kV case, matching most closely with the experiment.

Carbon based materials↗

DOE OSTI2022

Integrated Computational Materials and Mechanical Modeling for Additive Manufacturing of Alloys with Graded Structure Used in Fossil Fuel Power Plants

Wire-arc additive manufacturing (WAAM) has demonstrated its unique capability of producing large-size alloy components with a significantly reduced fabrication time and enhanced geometry design freedom. In this project, the team has developed an ICME (Integrated Computational Materials Engineering) modeling framework, which supports the WAAM of the AUSC (Advanced Ultra-Supercritical) power plant components. The manufacturing design has been applied to Inconel 740H, steel P91, as well as the dissimilar alloy components between steel P91 and Inconel 740H. The ICME model framework is developed by considering two types of modeling. First, mechanistic modeling has been applied to control the printing quality and understand the sequence of the dissimilar printing of the wall structure. The following models have been included in the developed ICME framework: finite element thermal model, grain structure model, residual stress simulation, crystal plasticity model, CALPHAD-based precipitation kinetic model, phase stability prediction, thermal expansion predictive model, and heuristic creep model. Secondary, a physics-based machine learning model has also been developed based on the ICME model structure. The machine learning model development is based on the ICME model prediction with calibration of the experiments. In addition, the WAAM has been utilized as a high-throughput experimental tool rapidly generating a gradient of alloy composition to facilitate experimental database generation for process-structure-property relationships. Such a database directly supported the ICME-enhanced machine learning, which further assisted in intermediate composition block design between P91 and 740H. A high-throughput screening study of the oxidation resistance has been performed based on such high-throughput experimentation. Based on the computational design, several dissimilar alloy manufacturing with post-heat treatment have been performed with a comprehensive evaluation of mechanical performance, including hardness mapping, yield strength, creep resistance. In this project, the single component of P91 and 740H processed by WAAM after heat treatment designed by ICME has demonstrated higher performance in yield strength and creep resistance than the wrought materials. The P91 sample prepared by WAAM with ICME-designed heat treatment performs better than P92 in creep resistance. The designed graded alloy printing with intermediate block shows a promising performance that exceeds the traditional welding. Moreover, the current research indicates the high need for location-specific design analysis with uncertainty quantification, an important topic that deserves more dedicated research. The achievement of this project demonstrated the promising future of WAAM in structural alloy manufacturing for energy power plant development. Successful printing requires synergetic efforts made by manufacturing, mechanical, and materials sciences.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2025

Tritium Production Estimates in EIC Cooling Water Systems

Annual tritium production in EIC cooling water has been estimated in one sextant cooling system from expected electron beam and proton beam losses in the tunnel. Beam losses and the secondary particles they produce are the only source within the RHIC Tunnel for producing radioactivity in cooling water, including tritium. The need to estimate tritium production supports decisions on whether cooling water systems are required to meet Suffolk County Article 12 requirements (e.g., double-walled piping, leak detection and containment, etc.). Results are extended to the remaining sextant cooling water systems because of the similarity in tunnel cooling water loads and system volumes.

43 PARTICLE ACCELERATORS↗

DOE OSTI2026

Pore-Scale Transport Effects in Electrochemical CO 2 Reduction on Gold via Coupled Microkinetic-Transport Modeling

A pore-resolved modeling framework is developed to quantify how pore-scale transport affects the intrinsic microkinetics of CO 2 -to-CO on Au. A DFT-informed microkinetic model is coupled self-consistently to a Generalized-Modified Poisson–Nernst–Planck (GMPNP) transport description in a single, electrolyte-filled cylindrical pore, allowing local concentrations and potential to feed back into site-specific reaction rates. FIB-SEM is used to determine pore sizes within realistic electrode materials. Across pore diameters, d p = 10–6000 nm, the surface-averaged CO 2 reduction rate is systematically reduced relative to the ideal microkinetic baseline where mass transport is not accounted for; the effectiveness factor 𝜂 𝑠,CO 2 , which quantifies this ratio, decreases rapidly at more negative potentials and is about 1% near −1.0 V vs SHE due to reactant depletion. Spatial maps reveal pore-bulk alkalization that emerges at higher cathodic bias, with a small, near-wall pH dip due to electrostatic repulsion of hydroxide at the cathode interface. For a fixed aspect ratio L p /d p , narrower pores exhibit larger 𝜂 𝑠,CO 2 by shortening diffusion paths, whereas variations in the aspect ratio L p /d p play a secondary role. A dimensionless analysis (surface/bulk Damköhler numbers) delineates operating regimes. In conclusion, this work offers a concept for incorporating microkinetic models into homogenized porous-electrode models through effectiveness factors and pore-size distribution.

Au-catalyst↗

DOE OSTI2025

Microstructural evaluation of thin-wall sections of 316L stainless steel produced by laser powder-bed fusion processing

The synthesis of thin wall sections that are only 0.4 mm thick is achieved with LPBF AM. Sample preparation is optimized using metallographic polishing to produce samples with only 0.3 um rms roughness for scanning electron microanalysis with EBSD and EDS. A fully austenitic 316L phase is found without evidence of secondary phases. Unlike some AM products that can readily evidence composition segregation due to solute rejection as attributable to temperature gradients within the solidification

Jankowski, Alan F. [Sandia National Laboratories (↗

DOE OSTI2020

Power Generation Cycle with RELAP-7

Balance of plant of a High-Temperature gas-cooled Reactor – Pebble bed Module (HTR-PM) is modeled using RELAP-7. The model includes the primary helium loop where the heat produced by the core is transferred to a helical-coil steam generator and the secondary loop where super-heated steam is fed to a turbine to extract power. The steam is then condensed to subcooled water and pumped back into the steam generator. Results demonstrate that RELAP-7 has the capability to model different regimes encountered in two-phase flow with wall boiling, superheated steam, subcooled liquid and condensation. RELAP-7 also has the capability of modeling different fluids with their own specific models in a very flexible way, without any code change. This also demonstrates the capability of modeling the transfer of fission power into electrical power.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

The histone demethylase KdmB is part of a trimeric protein complex and mediates virulence and mycotoxin production in Penicillium expansum

Epigenetic modification of chromosome structure has increasingly been associated with alterations in secondary metabolism and sporulation defects in filamentous fungal pathogens. Recently, the epigenetic reader protein SntB was shown to govern virulence, spore production and mycotoxin synthesis in the fruit pathogen Penicillium expansum. Through immunoprecipitation-coupled mass spectrometry, we found that SntB is a member of a protein complex with KdmB, a histone demethylase and the essential protein RpdA, a histone deacetylase. Deletion of kdmB phenocopied some but not all characteristics of the ΔsntB mutant. KdmB deletion strains exhibited reduced lesion development on Golden Delicious apples and this was accompanied by decreased production of patulin and citrinin in host tissue. In addition, ΔkdmB mutants were sensitive to several cell wall stressors which possibly contributed to the decreased virulence observed on apples. In conclusion, slight differences in spore production and germination rates of ΔkdmB mutants in vitro did not impact overall diameter growth in culture.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Scaling behavior of low-temperature orthorhombic domains in the prototypical high-temperature superconductor La 1.875 Ba 0.125 CuO 4

Structural symmetry breaking and recovery in condensed-matter systems are closely related to exotic physical properties such as superconductivity (SC), magnetism, spin density waves, and charge density waves (CDWs). The interplay between different order parameters is intricate and often subject to intense debate, as in the case of CDW order and superconductivity. In La 1.875 Ba 0.125 CuO 4 (LBCO), the low-temperature structural domain walls are hypothesized as nanometer-scale pinning sites for the CDWs. Coherent x-ray diffraction techniques have been employed here to visualize the domain structures associated with these symmetry changes directly during phase transition. We have pushed Bragg coherent diffractive imaging (BCDI) into the cryogenic regime where most phase transitions in quantum materials reside. Utilizing BCDI, we image the structural evolution of LBCO microcrystal samples during the high-temperature tetragonal to low-temperature orthorhombic (LTO) phase transition. Our results show the formation of LTO domains close to the transition temperature and how the domain size decreases with temperature. In conclusion, the number of domains follows the secondary order parameter (or orthorhombic strain) measurement with a critical exponent that is consistent with the three-dimensional universality class.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Algorithms for coordinate reconstruction in position-sensitive virtual Frisch-grid detectors

Arrays of position-sensitive virtual Frisch-grid (VFG) CdZnTe (CZT) detectors provide a cost-effective solution for integrating large-area arrays for gamma-ray imaging and spectroscopy. These detectors employ high-aspect ratio CZT crystals (bars) with thicknesses up to 50 mm and cross-sections of up to 10 × 10 mm 2 . Despite the long drift distances of charge carriers in such crystals, the detectors have demonstrated excellent performance, achieving energy resolutions better than 1 % full width at half maximum (FWHM) at 662 keV and 3D position resolutions finer than 1 mm. The high spatial resolution is a critical feature of these detectors, as it enables correction of response non-uniformities caused by crystal defects, which remain present even in the highest-quality CZT material. Dislocations and dislocation walls are the primary defects responsible for variations in charge carrier losses as they drift from the interaction points toward the charge-collecting electrodes. The mechanism by which these defects affect carrier transport is generally well understood. Dislocations and sub-grain boundaries act as sinks for carrier-trapping centers, primarily impurities and secondary phases such as tellurium inclusions and precipitates. Here, these regions exhibit significantly higher carrier-trapping rates, leading to variations in the μτ-products. Because the locations of these micron-sized regions are fixed within the detector volume, fluctuations in the total collected charge arise from the random distribution of interaction sites. This results in non-uniform detector responses and degradation of energy resolution. However, by measuring the interaction-site locations with sufficient precision, charge-loss variations can be accurately corrected, allowing recovery of nearly intrinsic energy resolution.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Anomalous Auger Recombination in PbSe

Using first-principles approaches we find that the Auger recombination in PbSe is anomalous in three distinct ways. First, the direct Auger coefficient is 4 orders of magnitude lower than that of other semiconductors with similar band gaps, a result that can be attributed to the lack of involvement of a heavy-hole band. Second, phonon-assisted indirect Auger recombination prevails, contrary to the common belief that direct Auger is dominant in narrow-gap semiconductors. Third, an unexpectedly weak temperature dependence of the Auger coefficient is observed, which we can now attribute to the indirect nature of the Auger process. The widely accepted explanation of this behavior in terms of an unusual temperature dependence of the band gap is only a secondary effect. Furthermore, our results elucidate the mechanisms underlying the anomalous Auger recombination in IV-VI semiconductors in general, which is critical for understanding and engineering carrier transport.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Carbohydrate-aromatic interface and molecular architecture of lignocellulose

Abstract Plant cell walls constitute the majority of lignocellulosic biomass and serve as a renewable resource of biomaterials and biofuel. Extensive interactions between polysaccharides and the aromatic polymer lignin make lignocellulose recalcitrant to enzymatic hydrolysis, but this polymer network remains poorly understood. Here we interrogate the nanoscale assembly of lignocellulosic components in plant stems using solid-state nuclear magnetic resonance and dynamic nuclear polarization approaches. We show that the extent of glycan-aromatic association increases sequentially across grasses, hardwoods, and softwoods. Lignin principally packs with the xylan in a non-flat conformation via non-covalent interactions and partially binds the junction of flat-ribbon xylan and cellulose surface as a secondary site. All molecules are homogeneously mixed in softwoods; this unique feature enables water retention even around the hydrophobic aromatics. These findings unveil the principles of polymer interactions underlying the heterogeneous architecture of lignocellulose, which may guide the rational design of more digestible plants and more efficient biomass-conversion pathways.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Xylan-cellulose core structure of oat water-extractable β-glucan macromolecule: Insight into interactions and organization of the cell wall complex

Water-extractable β-glucan with high molar mass (HM) determines health benefits of oat food. Oat β-glucan was extracted by a standardized in vitro digestion method and co-existing water-extractable polysaccharide (WEP) fraction and its HM-arabinoxylan (HM-AX) subfraction were isolated to identify their highly acid-resistant subunit and investigate molecular interactions between constituent polymers. The WEP and HM-AX samples consisted of arabinoxylans (AXs) (74 and 76 %, respectively), however, cellulose constituted the secondary component (6.6 and 12.8 %, respectively). Multi-detection HPSEC along with specific enzymatic hydrolysis of AXs revealed the presence of the HM-xylan domain (16 and 34 %, respectively) built of numerous single- and multi-component populations with random coil and rod-like conformations, which were embedded in a xylan matrix with spherical conformation and controlled the macromolecular shape. Unlike single-component populations, the multi-component ones were resistant to hydrolytic action of AX-hydrolyzing enzymes and represented the subunits that anchor matrix polysaccharides onto cellulose surface. These results indicate that water-extractable β-glucan macromolecule comprises as integral element a cellulose core with two linking populations, HM-xylan and low molar mass glucomannan, which are surrounded by a feruloylated AX-arabinan-arabinogalactan composite and next laminated by β-glucan matrix. Here, the stiff cellulose-xylan backbone is the basis of HM β-glucan organization, controlled by its cellulose-like segments.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Hot electrons between cold walls

We consider electron cooling in a collisionless plasma slab between two cold and freely emitting walls. Numerical calculations suggest a counterintuitive behavior of this system: the cooling rate slows down and eventually stops, leaving the system with a significant fraction of its initial thermal energy. Analytical treatment within the Vlasov–Poisson model reveals a set of steady-states with a two-component distribution of electrons: the primary electrons trapped within the potential wells and the secondary electrons forming the counterstreaming beams. We show that such steady-states are linearly stable with respect to one-dimensional perturbations. Establishment of a particular steady-state depends on initial conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Fast response, optical radiance measurements of low intensity impurity emission in WEST plasmas with staggered wavelength filters

Fast response acquisition of atomic line emission through the use of a filterscope has been implemented on the WEST tokamak at multiple poloidal locations. Filterscopes consist of a fiber-optic-based transmission from the tokamak to specifically engineered optical bandpasses and photomultiplier tubes (PMT) that collect the emission intensity to measure a radiance, L [W/cm2/str], over the specified bandpass. This diagnostic records plasma-wall interaction (PWI) properties (e.g. impurity emission and recycling of main fuel ions) up to a max acquisition rate of 100 kHz. These PMT radiometric measurements are calibrated into a line-normalized radiance, LN [photons/sec/cm2/str], similar to traditional spectrometers, which can later be converted to a particle flux. Low intensity emission peaks are difficult to quantify due to often comparable continuum levels, thus a secondary filter shifted to a judiciously-selected, line-free region (~1 nm away) allows for background subtraction. The system currently installed on WEST targets tungsten (W) gross sputtering specifically by monitoring, with a filter pair, the spectral region near the neutral W line emission (W I 400.9 nm). The line and background filters of the pair are centered at 400.6 nm and 403.1 nm, respectively. Through a set beam splitters on each sight line, the filter pair are measuring from the same location. The two L signals near W I are then subtracted from each other yielding only the W I LN. W I LN data from a recent WEST experimental campaign is presented and compared with plasma parameters and traditional spectrometer measurements of W I line emission to demonstrate the capabilities of this staggered-filter filterscope method. Specifically, the choice of WEST-specific bandpass curves for the W I LN will be illustrated based on this latter comparison.

Neff, Anton↗

DOE OSTI2025

Energy impacts of nationwide window upgrades in commercial buildings

This report presents comprehensive estimates of the energy impacts of nationwide commercial building window upgrades in the United States, using a conservative approach. Windows play a substantial role in determining building energy use and occupant experience. Estimates point to commercial building windows impacting loads that represent more than 6 quads (approximately 6%) of annual primary energy use in the U.S. (Harris, 2022). Beyond heating and cooling loads, windows also have effects on lighting and occupant comfort. The fastest route to improving the energy efficiency of windows in U.S. buildings is upgrading or replacing windows in existing buildings. This is due to poor performance of windows in older existing buildings compared to most new construction, low levels of window replacement, and long window service life compared to energy-using building components. Nationwide window upgrades were considered using the following technologies: • Secondary glazing systems • Double pane (clear and tinted) • Triple pane (clear and tinted) • Electrochromic glazing Nationwide upgrades provide on the order of 4%–6% site energy savings in typical buildings, or up to 26% in buildings with the highest savings potential. Electrochromic windows, with their ability to adapt dynamically to environmental conditions, can provide additional benefits, ranging from median savings of 7.2% in buildings with window to wall ratio (WWR) greater than 10% and up to 28% for some buildings. Savings increase substantially for buildings with higher WWR. This study’s approach focused on isolating the direct energy benefits from improvement in window performance, and does not take into account the following additional benefits from window retrofits, which are likely to be substantial: • Managing peak demand and enabling HVAC equipment downsizing. • Energy savings from customizing upgrades to building type and climate. • Energy savings and comfort improvements resulting from post-retrofit reductions in air leakage. • Non-energy benefits, such as occupant comfort and resilience during extreme weather.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

High-field side scrape-off layer density profile measurements and implications for high-field side LHCD coupling in DIII-D

The high-field side (HFS) scrape-off layer (SOL) is an often under-diagnosed region of tokamak plasmas. Situated in a region with favorable curvature, the HFS SOL has minimal turbulence-induced radial transport compared to the low-field side. Using profile reflectometry, the HFS SOL density profile is measured with high temporal resolution for a wide range of DIII-D plasma discharges for the first time. The magnetic configuration, particularly the location of the secondary separatrix (SS) largely determines the HFS SOL density profile. Additionally, density perturbations induced by edge-localized modes (ELMs) are observed in the HFS SOL, and the impact of ELMs on the SOL density profile is characterized for a range of magnetic configurations. It is found that ELM-induced HFS SOL perturbations are generally localized to within the SS and ELM-induced changes to the HFS wall density are minimized in near double-null configurations. The characterization of the HFS SOL density profile on DIII-D is crucial for the effective coupling of the planned HFS lower hybrid current drive (LHCD) launcher. Experimental HFS SOL measurements are used as input to full-wave simulations of LHCD coupling. Furthermore, this work simulates the effect of the magnetic configuration on LHCD coupling. It also simulates LHCD coupling in ELMs and high q min discharges. During such discharges, the LHCD coupling is predicted to be resilient to ELM-induced SOL density perturbations.

high-field side↗

DOE OSTI2021

Control of Carbon Allocation in Phenylpropanoid Metabolism

Understanding the molecular mechanisms by which carbon flux is partitioned in plants, and how flux through the phenylpropanoid pathway in particular is regulated and allocated to different branches of the pathway is essential for the eventual rational manipulation of phenylpropanoid flux for bioenergy applications. The phenylpropanoid pathway is responsible for the biosynthesis of a diverse array of metabolites essential for structural integrity, water transport, UV protection, and defense against herbivores and pathogens. The products of the phenylpropanoid pathway, all of which are derived from phenylalanine, range from complex, insoluble polymers such as lignin and suberin, to soluble flavonoids and hydroxycinnamate esters, to volatile compounds used to attract pollinators. By far the most abundant of these is the complex heteropolymer lignin, which accounts for a significant portion of the dry weight of not only woody plants, but also of crop residues. Decreasing or altering lignin structure to provide increased cell wall digestibility could greatly increase the cost effectiveness of converting cell wall polysaccharides to ethanol or second-generation biofuels. On the other hand, it is also possible that plants engineered to accumulate higher levels of lignin could provide improved feedstock for direct combustion and electricity generation as part of a diverse bioenergy portfolio. Consistent with the enormous commitment of energy and carbon it requires, the synthesis of lignin is under tight regulatory control. In order to influence transcription, gene-specific activators and repressors must interact with basal transcription factors and the rest of the core transcriptional machinery. In eukaryotes, this interaction is bridged by the large, multi-subunit complex known as Mediator. Despite the clear importance of Mediator throughout the eukaryotes, the complex has only recently been studied in plants. We have shown that a pair of Mediator subunits, MED5a and MED5b are required for normal regulation of phenylpropanoid pathway product accumulation. Plants lacking these proteins show increased accumulation of phenylpropanoids in multiple tissues indicating that normally they directly or indirectly repress expression of phenylpropanoid pathway genes. Furthermore, we have recently shown that MED5 plays a role in dwarfing in some low lignin plants and feedback between and within metabolic pathways of secondary metabolism in Arabidopsis. Taken together with the established roles of Mediator in transcriptional regulation, and of MED5a and MED5b in the repression of phenylpropanoid metabolism, these observations suggest that MED5a and MED5b are key components of an active, transcriptional process by which phenylpropanoid homeostasis is maintained in wild-type plants. Our research focused on expanding our understanding of the role of Mediator, as well as elucidating the mechanisms by which these proteins influence phenylpropanoid biosynthesis and how metabolite accumulation within the pathway and between metabolic pathways is essential for feedback regulatory control. This research will inform future bioengineering efforts aimed at altering carbon allocation and cell wall engineering by contributing to our understanding of the role of Mediator in regulating lignin biosynthesis, a pathway of plant metabolism that is important on a global scale.

09 BIOMASS FUELS↗