Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAFETY REPORTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Mission safety evaluation report for STS-39, postflight edition

After a delay of approximately 2 months due to a rollback from the pad to replace the External Tank door lug housing, Space Shuttle Discovery was launched from NASA-Kennedy at 7:33 a.m. Eastern Daylight Time on 28 April 1991. STS-39 was the first unclassified DoD Shuttle mission. On 28 April, countdown proceeded normally through the T-20 minute hold. No significant problems were encountered except for the Operations Sequence-2 recorder starting unexpectedly; it was stopped by an uplink command. Discovery landed on KSC runway 15 at 2:55 p.m. EDT on 6 May 1991. This was the second time in 6 months that the Space Shuttle was diverted to KSC for landing because of high winds at Edwards AFB, Calif. This was also the 7th of 40 Shuttle missions to land at KSC in the history of the Space Shuttle Program. The Main Landing Gear outer right tire shredded 3 of the 16 cords due to either an uneven landing or a maximum force breaking test during rollout. Contributing factors to the tire cord shredding were the development of last minute crosswinds and reluctance of the ground controllers to distract the Shuttle pilots with warnings of the low flight path. As a corrective action, communication procedures will be modified for future flights.

Hardie, Kenneth O.↗

Mission safety evaluation report for STS-38, postflight edition

After several months delay due to Liquid Hydrogen (LH2) leaks in the External Tank (ET) 17 in LH2 umbilical disconnect, Atlantis was launched at 6:48 p.m. Eastern Standard Time on 15 Nov. 1990. Atlantis was cleared for launch after the replacement of the ET 17 in umbilical disconnect and a successful tanking test on 24 Oct. 1990. No technical concerns were encountered during the countdown. The end of the STS-38 mission was extended by one day because of high crosswinds at the primary landing site, Edwards Air Force Base (EAFB), Calif. On the next day, 20 Nov. 1990, the winds were too high for a safe landing at EAFB, and a decision was made to select the Shuttle Landing Facility (SLF) at the Kennedy Space Center (KSC) at the primary landing site. The deorbit burn was performed on orbit 79 of the STS-38 mission. Reentry and descent were effected with no problems. Postlanding inspection of Atlantis' exterior found little evidence of damage. There has been a concern about returning an Orbiter to KSC, because the last mission to do so experienced tire failure. Atlantis' tires and brakes were in excellent condition with no indication of excessive wear.

Hill, William C.↗

"Oops, It didn't arm." - A Case Study of Two Automation Assisted Altitude Deviations

Altitude deviations are the most common pilot error reported to the Aviation Safety Reporting System. Last year, altitude deviations were reported to the ASRS at the rate of about one per hour. The reporting pilot's narrative is usually our only source of information about what happened in these incidents. In a recent line-oriented, simulator study, twenty-two airline crews flew a realistic, two-hour mission in a DC-9 and an MD-88 aircraft. This paper will describe and analyze two of the five altitude deviations that were observed during this study. The paper focuses on the flight crews' use (or misuse) of the autopilot and autothrottle during these incidents.

Plamer, Everett↗

Identification of Error Patterns in Terminal-Area ATC Communications

Advancing air traffic management technologies have enabled a greater number of aircraft to use the same airspace more effectively. As aircraft separations are reduced and final approaches are more finely timed, there is less room for error. The present study examined 122 terminal-area, loss-of-separation and procedure violation incidents reported to the Aviation Safety Reporting System (ASRS) by air traffic controllers. Narrative description codes were used for the incidents for type of violation, contributing factors, recovery strategies, and consequences. Usually multiple errors occurred prior to the violation. Error sequences were analyzed and common patterns of errors were identified. In half of the incidents, errors were noticed in time to correct mistakes. Of these, almost 43% committed additional errors during the recovery attempt. This analysis shows that redundancies in the present air traffic control system may not be sufficient to support large increases in traffic density. Error prevention and design considerations for air traffic management systems are discussed.

Quinn, Cheryl↗

Part 121 Low Altitude Events: An Analysis of ASRS Reports

This presentation provides an aviation SME's human factors analysis of selected Low Altitude and Controlled Flight Towards Terrain (CFTT) events involving Part 121 air carriers as reported to the Aviation Safety Reporting System (ASRS).

low altitude↗

Why System Safety Professionals Should Read Accident Reports

System safety professionals, both researchers and practitioners, who regularly read accident reports reap important benefits. These benefits include an improved ability to separate myths from reality, including both myths about specific accidents and ones concerning accidents in general; an increased understanding of the consequences of unlikely events, which can help inform future designs; a greater recognition of the limits of mathematical models; and guidance on potentially relevant research directions that may contribute to safety improvements in future systems.

Holloway, C. M.↗

UK Regulatory experience with the criticality safety of transport package applications - 14519

The UK Government has created the Office for Nuclear Regulation (ONR) as an independent public body to ensure effective and efficient regulation of the nuclear industry in the UK. ONR brings together for the first time in the UK the regulation of nuclear safety, civil nuclear security, nuclear safeguards and the transport of radioactive substances within a single organization. Applications requesting approval to transport packages containing fissile material through the UK have been received for many decades from numerous organisations across the world. Each application is treated equally with the judgement of safety based on the information provided in the design safety report. In recent years, the ONR has questioned a number of criticality safety related assumptions; some of which have been held for many decades. The outcome from these discussions will be examined. Uranium hexafluoride (UF{sub 6}) has been transported across the world for many years, carried in 30B steel cylinders within a variety of overpacks. For simplicity, some criticality safety cases have not claimed for the presence of the overpack. However, it shall be shown that these safety cases will have difficulty in justifying the criticality safety of transporting uranium hexafluoride if credit for the overpack is not claimed. In addition, the applications that have been submitted for Competent Authority approval have made various assumptions regarding the shell thickness of the 30B cylinder, the distribution of the hydrogen fluoride (HF) impurity and the potential for the uranium hexafluoride residues to hydrolyse. The adequacy of these assumptions will be discussed in turn along with the need for the applicant to demonstrate compliance with any certificate restriction on the mass of heel (residue) allowed within the package. Uranium oxide (UO{sub 2}) powder is regularly transported around the world. For most designs, it is assumed that water will enter the package under accident conditions of transport. Under these conditions, a common assumption is that the grains of uranium oxide powder will evenly distribute within the water and internal volume of the package. The validity of this assumption from a realistic and pessimistic perspective will be challenged. It will then be shown that if instead the powder grains of uranium oxide are agglomerated together into larger sized groups, an increase in the k{sub eff} of the system of up to 2,000 pcm can occur. As packages are commonly loaded up to the criticality safety limit, an increase in k{sub eff} such as this is likely to be problematic. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Real-Time Safety and Quality Reporting System: Assessment of Clinical Data and Staff Participation

Purpose: To report on the use of an incident learning system in a radiation oncology clinic, along with a review of staff participation. Methods and Materials: On September 24, 2010, our department initiated an online real-time voluntary reporting system for safety issues, called the Radiation Oncology Quality Reporting System (ROQRS). We reviewed these reports from the program's inception through January 18, 2013 (2 years, 3 months, 25 days) to assess error reports (defined as both near-misses and incidents of inaccurate treatment). Results: During the study interval, there were 60,168 fractions of external beam radiation therapy and 955 brachytherapy procedures. There were 298 entries in the ROQRS system, among which 108 errors were reported. There were 31 patients with near-misses reported and 27 patients with incidents of inaccurate treatment reported. These incidents of inaccurate treatment occurred in 68 total treatment fractions (0.11% of treatments delivered during the study interval). None of these incidents of inaccurate treatment resulted in deviation from the prescription by 5% or more. A solution to the errors was documented in ROQRS in 65% of the cases. Errors occurred as repeated errors in 22% of the cases. A disproportionate number of the incidents of inaccurate treatment were due to improper patient setup at the linear accelerator (P<.001). Physician participation in ROQRS was nonexistent initially, but improved after an education program. Conclusions: Incident learning systems are a useful and practical means of improving safety and quality in patient care.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Multi-media authoring - Instruction and training of air traffic controllers based on ASRS incident reports

This paper discusses the use of computer-assisted instructions and flight simulations to enhance procedural and perceptual motor task training. Attention is called to the fact that incorporating the accident and incident data contained in reports filed with the Aviation Safety Reporting System (ASRS) would be a valuable training tool which the learner could apply for other situations. The need to segment the events is emphasized; this would make it possible to modify events in order to suit the needs of the training environment. Methods were developed for designing meaningful scenario development on runway incursions on the basis of analysis of ASRS reports. It is noted that, while the development of interactive training tools using the ASRS and other data bases holds much promise, the design and production of interactive video programs and laser disks are very expensive. It is suggested that this problem may be overcome by sharing the costs of production to develop a library of materials available to a broad range of users.

Armstrong, Herbert B.↗

What ASRS incident data tell about flight crew performance during aircraft malfunctions

This research examined 230 reports in NASA's Aviation Safety Reporting System's (ASRS) database to develop a better understanding of factors that can affect flight crew performance when crew are faced with inflight aircraft malfunctions. Each report was placed into one of two categories, based on severity of the malfunction. Report analysis was then conducted to extract information regarding crew procedural issues, crew communications and situational awareness. A comparison of these crew factors across malfunction type was then performed. This comparison revealed a significant difference in ways that crews dealt with serious malfunctions compared to less serious malfunctions. The authors offer recommendations toward improving crew performance when faced with inflight aircraft malfunctions.

Sumwalt, Robert L.↗

MIKA: Manager for Intelligent Knowledge Access Toolkit for Engineering Knowledge Discovery and Information Retrieval

Repositories of safety reports are often underutilized and only analyzed manually by trained experts, despite safety management systems requiring reports. These collections of documents contain a wealth of information from past projects and operations that could improve system safety and design. Advances in natural language processing techniques have improved information extraction and retrieval in consumer technology, biomedicine, and finance, for instance, but have not been applied to engineering documents on the same scale. To this end, the Manager for Intelligent Knowledge Access (MIKA) open-source toolkit has been developed for rapid knowledge discovery and information retrieval in safety engineering applications. The MIKA toolkit uses state-of-the-art natural language processing algorithms and allows a user to apply these methods to their own dataset. This paper describes the MIKA toolkit and its two primary capabilities, knowledge discovery and information retrieval, and demonstrates the toolkit via a case study on National Transportation Safety Board (NTSB) reports.

Machine Learning↗

MIKA: Manager for Intelligent Knowledge Access Toolkit for Engineering Knowledge Discovery and Information Retrieval

Repositories of safety reports are often underutilized and only analyzed manually by trained experts, despite safety management systems requiring reports. These collections of documents contain a wealth of information from past projects and operations that could improve system safety and design. Advances in natural language processing techniques have improved information extraction and retrieval in consumer technology, biomedicine, and finance, for instance, but have not been applied to engineering documents on the same scale. To this end, the Manager for Intelligent Knowledge Access (MIKA) open-source toolkit has been developed for rapid knowledge discovery and information retrieval in safety engineering applications. The MIKA toolkit uses state-of-the-art natural language processing algorithms and allows a user to apply these methods to their own dataset. This paper describes the MIKA toolkit and its two primary capabilities, knowledge discovery and information retrieval, and demonstrates the toolkit via a case study on National Transportation Safety Board (NTSB) reports.

Systems Engineering↗

ASRS for Unmanned Aviation Systems

This presentation provides an overview of NASA's Aviation Safety Reporting System (ASRS) for Unmanned Aviation Systems / drones

Aviation Safety Reporting System↗

Verification of MELCOR Input Decks Used in ITER RPrS Analyses

This report as part of an ITER Task Agreement, documents the verification of the MELCOR Input Computer Decks used in performing the required safety analyses to be presented in the Preliminary Safety Report (Rapport Préliminaire de Séreté, RPrS).

99 GENERAL AND MISCELLANEOUS↗

Personal Electronic Devices and Their Interference with Aircraft Systems

A compilation of data on personal electronic devices (PEDs) attributed to having created anomalies with aircraft systems. Charts and tables display 14 years of incidents reported by pilots to the Aviation Safety Reporting System (ASRS). Affected systems, incident severity, sources of anomaly detection, and the most frequently identified PEDs are some of the more significant data. Several reports contain incidents of aircraft off course when all systems indicated on course and of critical events that occurred during landings and takeoffs. Additionally, PEDs that should receive priority in testing are identified.

Ross, Elden↗