SEARCH · Engineering Papers

Results for “Repository”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

DOE OSTI2015

Update on site selection for Canada's national repository for used nuclear fuel - 15481

In 2007, the Government of Canada selected Adaptive Phased Management as Canada's plan that provides for long-term management of Canada's used nuclear fuel in a deep geological repository, located in an informed and willing host. The Nuclear Waste Management Organization is tasked through federal legislation to select the site and develop and manage all aspects of Canada's plan. In May 2010 the Nuclear Waste Management Organization published and initiated the site selection process that serves as a road map for decision-making on the location for the deep geological repository. The Nuclear Waste Management Organization continues to lead the site selection process for a deep geological repository for the long term management of Canada's used nuclear fuel and centre of expertise. The screening down process is advancing and, from an initial starting point of 22 communities expressing interest in learning about the project, as of November 2014 14 communities are now the focus of more detailed studies. Preliminary assessments are underway with these communities, which is the third step in the 9 step site selection process. Preliminary assessments involve preliminary technical and social desktop and field assessments, engagement activities within and beyond the interested community and seeking involvement of Indigenous peoples and nearby municipalities in the planning and conduct of the work. The paper provides an update on the advancement of the site selection process. It describes the nature of the technical and social studies being conducted at this phase of work, including the progressively more detailed field studies which are the focus of technical work at this stage, approach to engagement and collaboration with communities to direct these studies, and the work underway to ensure the framework used for this assessment and engagement includes the range of priorities and perspectives of First Nations and Metis peoples and communities in the broader area. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2015

OECD NEA radioactive waste repository metadata management (RepMet) initiative (2014-2018) - 15614

The OECD/NEA Radioactive Waste Repository Metadata Management (RepMet) initiative aims to bring about a better understanding of the identification and administration of metadata - a key aspect of data management - to support national programmes in managing their radioactive waste repository data, information and records in a way that is both harmonised internationally and suitable for long-term management and use. At this point in the project, the main focus lies on 'waste packages at their storage sites ready for geological disposal' but excluding spent fuel and high level waste (HLW). Later work will deal with metadata collected on spent fuel and HLW as well as with different phases of repository development: design and construction, and operation. In order to develop metadata, RepMet members have provided lists of data items they currently collect and manage for packaged waste. The lists, albeit it non comprehensive, suggest that the number and type of data items varies importantly from organisation to organisation. At term, RepMet plans to generate a comprehensive list of such data items and their metadata. In parallel, RepMet is developing a document which examines a selected number of existing metadata standards. Because of the specialist nature of radioactive waste management, including waste processing facilities, disposal facilities and waste packages, existing metadata standards do not seem to be transferable as defined. Rather, RepMet will explore such standards to identify relevant principles for possible adaptation to the radioactive waste management community. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2015

Repository planning for spent nuclear fuel and high-level radioactive waste: insights from U.S.. and international programs - 15638

For decades, the United States and other nations with nuclear programs have been planning for permanent disposition of spent nuclear fuel and high-level waste, to address the increasingly difficult problem of storing these materials for the long term. These plans are complicated by issues ranging from technological factors to regulatory approaches and public concerns about health and environmental protection. In its 2012 report, the Blue Ribbon Commission (BRC) on America's Nuclear Future identified a number of recommendations for creating a safe, long-term solution to the nation's problem of managing and disposing of its spent fuel and high-level radioactive waste. These include a recommendation that the U.S. Environmental Protection Agency (EPA) revise its standards for a high-level waste repository. The EPA is currently reviewing and synthesizing literature relevant to such standards, including: (1) existing national and international standards and guidelines for repositories; and (2) benefits and barriers to such standards, including limitations related to current technologies, as well as siting, licensing, and construction processes. This paper highlights findings of this literature review and synthesis. More than 90 countries, from Albania to Vietnam and Yemen, were identified as potential sources of relevant information based on existing nuclear programs or consideration of such programs to address future energy needs. Pursuant to the BRC recommendations, the U.S. Department of Energy (DOE) has compiled extensive information resources relevant to spent fuel and radioactive waste repositories in the Centralized Used Fuel Resource and Information Exchange (CURIE) database developed by Oak Ridge National Laboratory. Further valuable sources of information include annual proceedings of recent Waste Management Symposia, which provide insights into recent trends and progress across various national and international programs. Recent literature from a number of countries, including the United States and Canada, and the United Kingdom, Finland, Sweden, France, Germany, and other countries in Western Europe, as well as other regions including Australia, indicates that consent-based siting has emerged as a dominant theme. In addition to effective siting processes, key program needs identified in the literature include regulatory standards and performance context, as well as reliable technologies and engineered systems, such as for deep drilling and assured safe containment of these radioactive materials extending into the very long term. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2016

Documentation of Radioactive Waste Packages for Disposal in the Konrad Repository - 16253

For the Konrad repository, the plan approval procedure has been completed in 2002. In 2007 all complaints filed against the repository were dismissed, so that there is a legal and un-appealable license decision available. The waste acceptance requirements were revised taking into account additional requirements from the plan approval decision. Today, there are already several hundred waste packages produced that meet all requirements for final disposal in Konrad. The acquisition, verification and quality assurance of the data relevant for disposal is performed in parallel to the waste treatment and packaging. This constitutes the development of database applications, on the one hand to capture and handle specific data for the waste packages to another to manage the disposal procedures. The development of a database application for recording disposal-relevant data of waste packages has already been completed with regard to the radiological requirements. Additional aspects based on the requirements of the plan approval decision, e.g. water law relevant aspects, have to be taken into account. Thus, an upgrade relating to the recording of groundwater debilitating substances will be carried out in a second step, which is expected to be completed in 2016. In parallel, the development of a database application is carried out to coordinate the waste package deliveries to the repository and to document their disposal. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2016

Optimized Qualification of Legacy Waste for the Repository Konrad - 16629

The repository Konrad in Germany is planned for the acceptance of low level waste and intermediate level waste. The Wiederaufarbeitungsanlage Karlsruhe (WAK GmbH) has the assignment to decommission and dispose of the nuclear facilities on the site of the Karlsruhe Institute of Technology (KIT). The entire inventory of these installations as well as the existing waste materials stored in the interim storage of the HDB are planned to be sent to the repository Konrad and are therefore treated according to the respective acceptance criteria. These acceptance criteria were defined on the basis of safety considerations and first published as a draft in 1995. After full legal recognition in 2007 the acceptance criteria were revised in 2010 and 2014. All legacy waste treated prior to 1995 has to be re-qualified according to the current state of acceptance. The repository will not open for acceptance of waste materials until 2022. Up to now only a small amount of acceptable waste packages exist. Therefore WAK GmbH established a scheme to improve and accelerate the processes and to have 2 annual delivery capacities (5000 m{sup 3} in total) ready by the end of the decade. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2018

Can we use Pictograms in a Long Term Communication System Related to a Radioactive Waste Repository? - 18301

Pictograms are often mentioned as a possible tool for sending messages about radioactive waste repositories in a far future, when the understand ability of our languages will have been lost. But they have also limits, related to the use of conventions that may fade over time. The goals of a signaling system for the long term may be (1) to alert (raise attention), (2) to inform of an underlying danger due to the existence of radioactive wastes, (3) to induce a favorable behavior (provoke or deter actions) in order not to disturb the performance of the repository. The quest for trans-cultural and trans-generational performance requires that some universal semiotic features be identified, shared by human beings of various cultures nowadays, and from far in the past to the present. Considering the typology of colors in various languages, the use of colors in ancient rock art and in children's drawings, a dedicated role may be assigned to each of the three colors, white, black and red/ocher, with a high potential for sustainable meaning: 1) red background = pay attention to this object because of the simple presence of the red color, that is to say the first color felt as color; 2) white inscription = absence of the object / action represented; 3) black inscription = presence of the object / action represented. The representation of a human body in movement inside a context is also understandable by people from various cultures. The combination of these 'semiotic primitives', used as relevant semantic features of the object and/or the experience to be represented, and 'topo-sensitive' criteria, used for pictogram production processes, would thus become a way to conceive a trans-cultural and trans-generational sign system for the signaling of radioactive danger. The choice of the stone could guarantee the durability of the support; the color could guarantee its visibility; and both could guarantee the transmission of the message. Combining these criteria could open the way to a long term communication system about radioactive waste repositories. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2018

Qualification of Numerical and Semi-Analytical Modeling Codes for Thermal Design of HLW Repository - 18455

Disposal in a geological repository is a viable option for safely isolating high-level radioactive waste. Thermal processes induced by decay heat from the radioactive waste may impact the integrity of the engineered barrier system, and may lead to fluid flow and transport; and the associated migration of radionuclides. This study looks at an analysis of thermal conduction for the emplacement of high-level waste in a repository located in bedded salt. The simulations used analytical and numerical methods to study conductive heat transport in a repository. This study concentrated on heat flow in a central waste package with contributions from adjacent waste packages and drifts. Of particular importance to this work is comparison of predictions of peak temperature at the drift wall and at the waste package surface using different solution methods. Simulation results of analytical and numerical modeling methods are compared. The results show that predictions of the codes were comparable under identical initial and boundary conditions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2018

Salt Reconsolidation and Repository Engineered Barriers - 18651

Salt repositories for the permanent disposal of hazardous waste provide extraordinary advantage over other geo-media because geotechnical barriers can be constructed with confidence using crushed salt, which is a perfectly compatible material that is readily available by mining practice. Other excellent barrier materials that consist of specialty mixes of salt-based concrete, bentonite, and bitumen bolster confidence that a repository in geologic salt formations will remain impermeable forever. Practically speaking, achieving high-performance engineered barriers assumes an isolation role as important as the host formation itself. Long-term performance assessment intrinsically includes evaluating seal-system design and demonstrated operational characteristics. Consistent with global interests, specific research on salt-repository seal systems not only established significant technical bases but identified possible improvements through straightforward research and laboratory and field investigations. Engineered barriers of crushed salt with possible additives, such as clay and water, evolve to create hydrological and mechanical characteristics that approach those of the host salt formation. Demonstrating early functionality of seal systems reduces uncertainty, which is introduced when calculating or predicting when performance properties become effective in the future. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2020

Deposition Behavior of Supersaturated Silicic Acid on the Surfaces of Chlorite and Sericite around Geological Repository - 20138

Around the repository for HLW underground, cementitious materials used for the repository may complicate the migration of radionuclides in the host rock by the alteration of groundwater to a high alkaline condition. Specially, the alkaline groundwater dissolves silicate minerals of host rocks but the plenty of silicic acid dissolved from host rocks in groundwater will become supersaturated and deposit on the surface of flow-paths after decreasing the pH value to about 8 with dispersion and dilution. The deposition of silicic acid is presumed to recover and improve the barrier performance of host rocks for the radionuclide migration because of the narrowing of flow paths and the decrease of the permeability. In this study, the deposition behavior of supersaturated silicic acid was examined by the deposition experiments and the deposition rate constants, k [m/s], were evaluated from the experimental data. As the minerals of the surface of flow-paths, this study focused on chlorite and sericite, hydrothermally-altered minerals distributed to fill fractures of granite. In the experiments, deposition behavior of silicic acid on the powder of chlorite or sericite was observed after the pH of the solution was adjusted to 8 in order to make the silicic acid supersaturated. The solution of CaCl{sub 2} and NaCl were added into a silicic acid to simulate Ca{sup 2+} from the cementitious materials of the repository, Na{sup +} of the saline groundwater in Japan. From the results, the value of k was estimated to be about the order of 10{sup -10}∼10{sup -9} m/s for both chlorite and sericite and the value was almost the same as those for amorphous silica in the previous study. Therefore, the deposition of silicic acid may be assessed by similar apparent deposition rate constants even in actual underground containing various silicate minerals. Moreover, the Damkoehler number which is the dimensionless number expressed by the ratio of characteristic time of mass transfer and chemical reaction was calculated to be 10{sup 4} or more from the value of k. This value shows that the deposition reaction of silicic acid was estimated as much more predominant than the groundwater flow under the situation simulated in this study. These results suggest that the deposition of supersaturated silicic acid on the flow paths composed with various silicate minerals will be able to retard the migration of radionuclides because of narrowing micro flow-paths. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2019

A Semantic Search Capability for a Grid Model Repository

The operation of electric grids is becoming more challenging due to continued increases in wind and solar generation, the proliferation of decentralization generation resources, and cyber security threats. To support the needed research, new large scale realistic public grid models have been developed and placed in a repository for access by researchers. To assist researchers in easily finding grid models that are suitable for their specific research needs, an approach to searching numerous large grid models was evaluated, prototyped and developed. Here, the research identified multiple possible approaches to using graph database techniques and a natural language processing for the search algorithm. Results of the prototype, the final approach for production repository and the search algorithm formulation are described.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2020

Mineral-specific heterogeneous neptunium sorption onto geological repository rocks in oxic and anoxic conditions and various temperatures

Neptunium poses challenges for radioactive wastes management due to its long half-life and ingrowth from americium decay, as well as its high mobility in water in its oxidized forms. Np(V)-bearing aqueous solutions were contacted with polished and crushed gneiss and dolerite from the Yeniseisky site, Russia, which is under consideration as a location for an underground repository, both in oxic and anoxic conditions at 20 and 90 °C. Neptunium sorption on crushed gneiss and dolerite in oxic conditions at 20 °C was quite low, but increased substantially in anoxic conditions. Autoradiography on samples treated at 20 °C revealed that sorbed Np was associated mostly with dark colored iron-bearing minerals, and solvent extraction indicated partial reduction of Np(V) to Np(IV). Sorption of Np from aqueous solutions contacted with dolerite and gneiss at 90 °C was in all cases higher than at the lower temperature. Autoradiography of polished rock samples treated in anoxic conditions at 90 °C revealed that Fe-bearing minerals had 3–4 orders of magnitude more Np sorbed on them than the quartz and feldspar grains. X-ray photoelectron spectroscopy indicated this sorbed Np was present as NpO 2 . This study supports the concept that the geologic conditions present at the planned repository site will retard Np migration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Reduced-order modeling of near-field THMC coupled processes for nuclear waste repositories in shale

Performance assessment (PA) of geologic radioactive waste repositories requires three-dimensional simulation of highly nonlinear, thermo-hydro-mechanical-chemical (THMC), multiphase flow and transport processes across many kilometers and over tens to hundreds of thousands of years. Integrating the effects of a near-field geomechanical process (i.e. buffer swelling) into coupled THC simulations through reduced-order modeling, rather than through fully coupled geomechanics, can reduce the dimensionality of the problem and improve computational efficiency. In this study, PFLOTRAN simulations model a single waste package in a shale host rock repository, where re-saturation of a bentonite buffer causes the buffer to swell and exert stress on a highly fractured disturbed rock zone (DRZ). Three types of stress-dependent permeability functions (exponential, modified cubic, and Two-part Hooke’s law models) are implemented to describe mechanical characteristics of the system. Overall, our modeling study suggests that compressing fractures reduces DRZ permeability, which could influence the rate of radionuclide transport and exchange with corrosive species in host rock groundwater that could accelerate waste package degradation. Less permeable shale host rock delays buffer swelling, consequently retarding DRZ permeability reduction as well as chemical transport within the barrier system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Machine Learning Surrogates of a Fuel Matrix Degradation Process Model for Performance Assessment of a Nuclear Waste Repository

Spent nuclear fuel repository simulations are currently not able to incorporate detailed fuel matrix degradation (FMD) process models due to their computational cost, especially when large numbers of waste packages breach. The current paper uses machine learning to develop artificial neural network and k-nearest neighbor regression surrogate models that approximate the detailed FMD process model while being computationally much faster to evaluate. Further, using fuel cask temperature, dose rate, and the environmental concentrations of CO 3 2- , O 2 , Fe 2+ , and H 2 as inputs, these surrogates show good agreement with the FMD process model predictions of the UO 2 degradation rate for conditions within the range of the training data. A demonstration in a full-scale shale repository reference case simulation shows that the incorporation of the surrogate models captures local and temporal environmental effects on fuel degradation rates while retaining good computational efficiency.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2018

Science and Engineering Team Repository Selection and Validation

The National Nuclear Security Administration’s Office of Nuclear Smuggling Detection and Deterrence (NSDD), Science and Engineering Team (SET) has engaged Brookhaven National Laboratory (BNL) in the selection, development and management of a knowledge management platform. This platform will serve as a repository for programmatic documents, data, and other relevant files. In support of this effort, BNL implemented a sixteen-month process to ensure the selection of the most relevant and user-friendly repository from among several commercially available and open source options.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

DOE OSTI2019

Corrosion Behavior of Fe-7Cr-1Mo-12Zr Metal Waste Form Alloy in Simulated Repository Environment

Metal waste forms (MWF) are solid metallic waste categorized as high-level radioactive waste generated during pyro-reprocessing of spent metallic fuels and geologically disposed off. This waste form generated requires an excellent corrosion resistance in a geological repository environment. In the present work, Fe-7Cr-1Mo-12Zr MWF alloy was developed by casting in an arc melting furnace. The x-ray diffraction analysis revealed the formation of stable phases of α-Fe solid solution and the intermetallic phases of Fe{sub 2}Zr and Fe{sub 23}Zr{sub 6}. The corrosion behavior of Fe-7Cr-1Mo-12Zr alloy was investigated using electrochemical techniques in aggressive (highly acidic with Cl{sup −}) and nominal repository pH environment. Cyclic potentiodynamic polarization studies indicated the shift in corrosion potential toward cathodic potential in highly acidic solution with Cl{sup −}. The corrosion mechanism of pitting is associated with acidified pH medium with more Cl{sup −}, whereas uniform corrosion or transpassive dissolution is resultant of mild acidity or mild alkaline medium. The passive region is wider in pH 5 and 8 when compared to pH 1 and 3. Electrochemical impedance spectroscopic (EIS) analysis revealed the lowering of passive film stability in the highly acidic medium in the presence of Cl{sup −}. The role of passive oxide layers on the corrosion resistance of the Fe-7Cr-1Mo-12Zr MWF alloy is discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Chemical degradation of fly ash blended concrete with the seasonal variation of rainwater in a radioactive waste repository: A thermodynamic modeling approach

Highlights: • The thermodynamic model for the cementitious system was successfully developed. • The chemical degradation of concrete was greatly affected by rainwater types. • Inorganic carbon species in rainwater reduced the chemical resistance of concrete. • The durability of concrete to rainwater decreased with increasing fly ash content. This study presents a long-term degradation behavior of fly ash blended concrete in a vault type low- and intermediate-level radioactive waste (LILW) repository by thermodynamic equilibrium calculations using PHREEQC combined with CEMDATA18 database. Since rainwater plays a predominant role as leachate for the concrete waste container in the repository, the effect of chemical properties of seasonal rainwater on the chemical degradation of concrete was analyzed. In addition, the impact of the blending with fly ash on the chemical degradation was evaluated through a gradual replacement of ordinary Portland cement (OPC) by fly ash. Regardless of the replacement level, autumn rainwater showed the greatest influence on the concrete degradation owing to the presence of inorganic carbon species, which induce the carbonation. The resistance of concrete to chemical degradation by rainwater was persistently reduced due to the decreasing formation of portlandite and calcium silicate hydrate (C-S-H) with increasing replacement level.

36 MATERIALS SCIENCE↗

DOE OSTI2015

On the impact of temperatures up to 200°C in clay repositories with bentonite engineer barrier systems: A study with coupled thermal, hydrological, chemical, and mechanical modeling

One of the most important design variables for a geological nuclear waste repository is the temperature limit up to which the engineered barrier system (EBS) and the natural geologic environment can be exposed. Up to now, almost all design concepts that involve bentonite-backfilled emplacement tunnels have chosen a maximum allowable temperature of about 100°C. Such a choice is largely based on the consideration that in clay-based materials illitization and the associated mechanical changes in the bentonite (and perhaps the clay host rock) could affect the barrier attributes of the EBS. However, existing experimental and modeling studies on the occurrence of illitization and related performance impacts are not conclusive, in part because the relevant couplings between the thermal, hydrological, chemical, and mechanical (THMC) processes have not been fully represented in the models. This work presents a fully coupled THMC simulation of a nuclear waste repository in a clay formation with a bentonite-backfilled EBS for 1000 years. Two scenarios were simulated for comparison: a case in which the temperature in the bentonite near the waste canister can reach about 200°C and a case in which the temperature in the bentonite near the waste canister peaks at about 100°C. The model simulations demonstrate some degree of illitization in both the bentonite buffer and the surrounding clay formation. Other chemical alterations include the dissolution of K-feldspar and calcite, and precipitation of quartz, chlorite, and kaolinite. In general, illitization in the bentonite and the clay formation is enhanced at higher temperature. However, the quantity of illitization is affected by many chemical factors and therefore varies a great deal. The most important chemical factors are the concentration of K in the pore water as well as the abundance and dissolution rate of K-feldspar; less important ones are the concentration of sodium and the quartz precipitation rate. In our modeling scenarios, the calculated decrease in smectite volume fraction in bentonite ranges from 1 to 8% of the initial volume fraction of smectite in the 100°C scenario and 1–27% in the 200°C scenario. Chemical changes in the 200°C scenario could also lead to a reduction in swelling stress up to 15–18% whereas those in the 100°C scenario result in about 14–15% reduction in swelling stress for the base case scenario. Model results also show that the 200°C scenario results in a much higher total stress than the 100°C scenario, mostly due to thermal pressurization. While cautions should be taken regarding the model results due to some limitations in the models, the modeling work is illustrative in light of the relative importance of different processes occurring in EBS bentonite and clay formation at higher than 100°C conditions, and could be of greater use when site specific data are available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2017

A comparative study of discrete fracture network and equivalent continuum models for simulating flow and transport in the far field of a hypothetical nuclear waste repository in crystalline host rock

One of the major challenges of simulating flow and transport in the far field of a geologic repository in crystalline host rock is related to reproducing the properties of the fracture network over the large volume of rock with sparse fracture characterization data. Various approaches have been developed to simulate flow and transport through the fractured rock. The approaches can be broadly divided into Discrete Fracture Network (DFN) and Equivalent Continuum Model (ECM). The DFN explicitly represents individual fractures, while the ECM uses fracture properties to determine equivalent continuum parameters. In this paper, we compare DFN and ECM in terms of upscaled observed transport properties through generic fracture networks. The major effort was directed on making the DFN and ECM approaches similar in their conceptual representations. This allows for separating differences related to the interpretation of the test conditions and parameters from the differences between the DFN and ECM approaches. The two models are compared using a benchmark test problem that is constructed to represent the far field (1 × 1 × 1 km 3 ) of a hypothetical repository in fractured crystalline rock. The test problem setting uses generic fracture properties that can be expected in crystalline rocks. The models are compared in terms of the: 1) effective permeability of the domain, and 2) nonreactive solute breakthrough curves through the domain. The principal differences between the models are mesh size, network connectivity, matrix diffusion and anisotropy. We demonstrate how these differences affect the flow and transport. Finally, we identify the factors that should be taken in consideration when selecting an approach most suitable for the site-specific conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗