SEARCH · Engineering Papers

Results for “Reflectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

All sources NASA NTRS DOE OSTI

NASA NTRS1982

When are spectral reflectance curves comparable

Spectral reflectance curves of flat laboratory samples of the carbonaceous chondrite Allende, a basalt, and the ordinary chondrite Bruderheim measured in a bidirectional geometry are shown to differ from those measured using an integrating sphere. In general, reflectance curves obtained by the bidirectional method are redder than those obtained with an integrating sphere. The degree of difference increases with increasing absolute reflectance. When spectral reflectance curves obtained by the two methods are compared to the reflectance curves expected for spherical and aspherical planets covered with the same materials, it is found that in general the integrating sphere measurements provide a better match to a planet at small phase angles. As the phase angle increases, bidirectional reflectance curves provide a closer match.

Gradie, J.↗

NASA NTRS1981

Field measurement of spectral reflectance

It is pointed out that success in acquiring remote sensing data for describing a given target, such as vegetation, is contingent upon an understanding of the reflectance properties of the target and its surroundings. Field measurements of a target's spectral reflectance are in most cases made with single-beam instruments by sequentially viewing the target and a white standard reflector, which is assumed to be Lambertian. Since variation in atmospheric transmission can occur between the times of measuring the target and the standard reflector, substantial errors in reflectance calculated from these measurements may result. To preclude this possibility the irradiance on, and the radiance reflected from, the target must be measured simultaneously. Measurements of the spectral hemispherical-conical reflectance of a target are made by simultaneously measuring irradiance and radiance with pairs of portable spectroradiometers. The techniques for calibrating the instruments and for collecting and analyzing spectral reflectance data on vegetative canopies are described. Significant instrumental sources of error and their magnitude are discussed, together with problems involved in making such measurements.

Duggin, M. J.↗

NASA NTRS1982

Relation of agronomic and multispectral reflectance characteristics of spring wheat canopies

The relationships between crop canopy variables such as leaf area index (LAI) and their multispectral reflectance properties were investigated along with the potential for estimating canopy variables from remotely sensed reflectance measurements. Reflectance spectra over the 0.4 to 2.5 micron wavelength range were acquired during each of the major development stages of spring wheat canopies at Williston, North Dakota, during three seasons. Treatments included planting date, N fertilization, cultivar, and soil moisture. Agronomic measurements included development stage, biomass, LAI, and percent soil cover. High correlations were found between reflectance and percent cover, LAI, and biomass. A near infrared wavelength band, 0.76 to 0.90 microns, was most important in explaining variation in LAI and percent cover, while a middle infrared band, 2.08 to 2.35 microns, explained the most variation in biomass and plant water content. Transformations, including the near infrared/red reflectance ratio and greenness index, were also highly correlated to canopy variables. The relationship of canopy variables to reflectance decreased as the crop began to ripen. the canopy variables could be accurately predicted using measurements from three to five wavelength bands. The wavelength bands proposed for the thematic mapper sensor were more strongly related to the canopy variables than the LANDSAT MSS bands.

Bauer, M. E.↗

NASA NTRS1983

Baffle system employing reflective surfaces

Reflective baffles are proposed to reject off-axis light entering a telescope. Toroidal surfaces and adjacent cones are positioned so that off-axis rays make multiple reflections between these two surfaces. Meridional rays are reflected approximately parallel to the entering direction. Skew rays are reflected obliquely, but leave the telescope aperture. The range of incident angles for which these reflections are obtained is approximately 45 deg. A system is described that is designed specifically for the Space Shuttle Infrared Telescope Facility (SIRTF). Because of its reflective properties, the proposed baffle system rejects about 90 deg of the heat load from the SIRTF sunshade that would be absorbed in systems of conventional black baffles.

Linlor, W. I.↗

NASA NTRS1984

Bidirectional Spectral Reflectance of Earth Resources: Influence of Scene Complexity and Atmospheric Effects on Remote Sensing

Practical methods for remote sensing when scene complexity and atmospheric effects modify intrinsic reflective properties are developed. The radiation history from ground to space of light reflected from individual leaves is initially multiply scattered within the crop canopy, whose geometry provides a controlling influence, then scattered and attenuated as a result of transmission through the Earth's atmosphere. The experimental and theoretical tools for studying these effects quantitatively are under development. A new radiative transfer code which uses Fourier transforms to solve the 3-D equation of transfer was developed. The initial version permits inhomogeneous non-Lambertian surfaces but assumes horizontal uniformity for the atmosphere. The computational results are in excellent agreement with Monte Carlo calculations. Laboratory apparatus to study the variation of spectral reflectance of individual leaves as a function of illumination incidence angle and reflection angle was used. These data can then be used in models to determine canopy scattering effects. Stress tests by observing leaf reflectance at 0.9 microns as a function of time following clipping from the stem was performed. A reflectance increase due to loss of water has been observed.

Diner, D. J.↗

NASA NTRS1983

Strength of mineral absorption features in the transmitted component of near-infrared reflected light - First results from RELAB

Bidirectional reflectance measurements are the only type of reflectance data available to the remote observer. For compositional interpretations, data are desired not only for identification of possible mineral components but also for modal abundance. The latter requires detailed information about the strength of absorption features. Using a new laboratory facility, the RELAB, laboratory data in the near infrared are presented that document effects of particle size, mineral mixtures, and viewing geometry for selected materials with well-developed absorption bands. The commonly observed increase in reflectance with decrease in particle size is also observed for absorption bands as well as a related decrease in absorption strength. For small particles in parts of the spectrum of maximum reflectance, however, a minor decrease in reflectance with a decrese in particle size is sometimes observed. Small particles dominate the observed characteristics of particulate surfaces, which contain a range of particle sizes. The mean optical path length (transmission through particles) of reflected radiation measured for a variety of particle sizes has an apparent upper limit of about 2 mm for particles of less than 250 microns. The typical number of particles involved in the optical path is less than 50.

Pieters, C. M.↗

NASA NTRS1983

Inversion of vegetation canopy reflectance models for estimating agronomic variables. I - Problem definition and initial results using the Suits model

An important but relatively uninvestigated problem in remote sensing is the inversion of vegetative canopy reflectance models to obtain agrophysical parameters, given measured reflectances. The problem is here formally defined and its solution outlined. Numerical nonlinear optimization techniques are used to implement this inversion to obtain the leaf area index using Suits' canopy reflectance model. The results for a variety of cases indicate that this can be done successfully using infrared reflectances at different views or azimuth angles or a combination thereof. The other parameters of the model must be known, although reasonable measurement errors can be tolerated without seriously degrading the accuracy of the inversion. The application of the technique to ground based remote-sensing experiments is potentially useful, but is limited to the degree to which the canopy reflectance model can accurately predict observed reflectances.

Goel, N.↗

NASA NTRS1984

Inversion of vegetation canopy reflectance models for estimating agronomic variables. II - Use of angle transforms and error analysis as illustrated by Suits' model

The technique for inverting a vegetation canopy reflectance model described earlier (Goel and Strebel, 1983) is investigated further. The novel concept of an 'angle transform' is introduced. This concept allows the formation of functions of reflectances at different view zenith and azimuth angles, which are either sensitive or insensitive to a certain agronomic parameter. A proper combination of these functions can allow determination of all the important agronomic and spectral parameters from measured canopy reflectance data. The technique is demonstrated using Suits' (1972) model for homogeneous canopies. It is shown that leaf area index, leaf reflectance and transmittance, and average leaf angle all can be determined from the canopy reflectance at a set of selected view zenith and azimuth angles. A sensitivity analysis of the calculated values to the errors in the data is also carried out. Guidelines are formulated for the number and types of observations required to obtain the values of a particular canopy variable to within a given degree of accuracy for a given level of error in the measurement of canopy reflectance.

Goel, N. S.↗

NASA NTRS1984

Microwave bistatic reflectivity dependence on the moisture content and matric potential of bare soil

Results are presented of an experimental program to determine the functional dependence of the microwave reflectivity of nonvegetated soil surfaces upon volumetric soil moisture and matric potential. A combination evaporation-drainage field experiment was conducted on a bare Captina slit loam with reflectivity, soil moisture content, and matric potential monitored for extended time periods. Results show that for a restricted pressure range (approximately -0.05 to -0.75 bar) there is excellent linear correlation between the log of bistatic reflectivity and both volumetric moisture content and matric potential. Layering effects due to steep moisture content (and matric potential) gradients in the profile are demonstrated to have two distinct and significant effects on the reflectivity response. At near saturation of rough surfaces a very thin dry surface layer appears to modify the effective roughness. This leads to a saturation of reflectivity at high moisture contents. As the surface proceeds to dry further, deeper layers produce coherent interference patterns in the reflectivity response, particularly at the higher frequencies.

Waite, W. P.↗

NASA NTRS1984

Modeling the directional reflectance from complete homogeneous vegetation canopies with various leaf-orientation distributions

The directional-reflectance distributions of radiant flux from homogeneous vegetation canopies with greater than 90 percent ground cover are analyzed with a radiative-transfer model. The model assumes that the leaves consist of small finite planes with Lambertian properties. Four theoretical canopies with different leaf-orientation distributions were studied: erectophile, spherical, planophile, and heliotropic canopies. The directional-reflectance distributions from the model closely resemble reflectance distributions measured in the field. The physical scattering mechanisms operating in the model explain the variations observed in the reflectance distributions as a function of leaf-orientation distribution, solar zenith angle, and leaf transmittance and reflectance. The simulated reflectance distribution show unique characteristics for each canopy. The basic understanding of the physical scattering properties of the different canopy geometries gained in this study provide a basis for developing techniques to infer leaf-orientation distributions of vegetation canopies from directional remote-sensing measurements.

Kimes, D. S.↗

NASA NTRS1986

The effect of cloud sides on reflected solar radiation as deduced from satellite observations

The observation of a feature that is characteristic of the reflection of solar radiation from absorbing finite clouds is reported. When absorption takes place, more radiation can be reflected by broken cloud fields than by extensive unbroken cloud fields. This feature is observed in solar radiation at 3.7 microns reflected by low-level, single-layered systems of water clouds over the Pacific Ocean. Interpreting the effect as due to geometrical factors, it is noted that absorption causes the reflected radiances to be highly anisotropic, so that they are generally greater from the sun-facing cloud sides than from the cloud tops. Diffusive leakage of radiation through the cloud sides is also reduced, and as a result maximum reflectivities occur in situations that maximize the contributions to the reflected radiation from the sides relative to that from the tops. Interpreting the effect as due to changes in liquid water content and cloud droplet sizes, it is noted that the observations at 0.63, 3.7, and 11 microns are consistent with a cloud model in which the liquid water content and droplet sizes are greater in the cloud centers and smaller at their edges. Theoretical calculations that qualitatively support both interpretations are presented.

Coakley, J. A., Jr.↗

NASA NTRS1987

Mars: Seasonally variable radar reflectivity

Since reflectivity is a quantity characteristic of a given target at a particular geometry, the same (temporally unchanging) target examined by radar on different occasions should have the same reflectivity. Zisk and Mouginis-Mark noted that the average reflectivities in the Goldstone Mars data increased as the planet's S hemisphere passed from the late spring into early summer. The same data set was re-examined and the presence of the phenomenon of the apparent seasonal variability of radar reflectivity was confirmed. Two objections to these findings are addressed: (1) reflectivity variations may be present in the Goldstone Mars data as a result of an instrument/calibration error; and (2) the variations were introduced into the analysis through comparing reflectivities from two incompatible subsets of the data.

Roth, L. E.↗

NASA NTRS1987

Reflectivity of earth's surface and clouds in ultraviolet from satellite observations

The Total Ozone Mapping Spectrometer on board Nimbus 7 is used to infer the UV surface and cloud reflectance at 370 nm. Cloudless surface reflectivity was analyzed on a global basis for all surface types for several months. The UV surface reflectivity varies from 2 percent for some forest and grassland regions to 14 percent for some sandy desert areas. A notable exception is the large salt flats of Bolivia, which have a reflectivity of about 60 percent. Cloud reflectivity was also analyzed for clouds located at three levels in the atmosphere, as determined by the 11.5 micron channel of the Temperature Humidity Infrared Radiometer. Average cloud reflectivity at 370 nm ranges from 52 percent for low clouds (tops less than 2 km) to 76 percent for high clouds (tops greater than 7 km at the equator, decreasing to greater than 4 km at poles).

Eck, T. F.↗

NASA NTRS1987

Atmospheric optical depth effects on angular anisotropy of plant canopy reflectance

The effects of varying atmospheric aerosol optical depth on the bidirectional reflectance distribution of vegetation canopies is investigated. The reflectance distributions of two pasture grass canopies and one soya bean canopy under different sky irradiance distributions were measured, and the data were analyzed in the visible and IR spectral bands. It is observed that, for the pasture grass canopies, the change in reflectance is due to the percentage of shadowed area viewed by the sensor, and for the soya bean, the specular reflection effect and increased diffuse irradiance penetration into the canopy cause reflectance changes. It is detected that the reflectivity for the soya bean canopy on a hazy day is lower than on a clear day; however, the opposite change is observed for the pasture grass. It is also detected that the normalized difference vegetation index values differ under clear and hazy conditions for the same vegetation canopy conditions.

Deering, Donald W.↗

NASA NTRS1987

Determination of the scaled optical thickness of clouds from reflected solar radiation measurements

A method for determination of scaled optical thickness from reflected solar radiation measurements is described in which measurements of the reflected function are compared with asymptotic expressions for the reflection function of optically thick layers. Analytic formulas are derived which show the dependence of the reflection and transmission functions of nonabsorbing atmospheres on cloud optical thickness, ground albedo, and the asymmetry factor. An expression is derived which shows that the ground albedo produces a constant bias in the derived optical thickness, regardless of the value of the measured reflection function. Results from an analysis of high-resolution images, obtained in Oklahoma, of the reflection function of clouds shows the impact of details of the single scattering phase function on the derived optical thickness.

King, Michael D.↗

NASA NTRS1987

Consolidated fuel reprossing program: The implications of force reflection for teleoperation in space

Previous research on teleoperator force feedback is reviewed and results of a testing program which assessed the impact of force reflection on teleoperator task performance are reported. Force relection is a type of force feedback in which the forces acting on the remote portion of the teleoperator are displayed to the operator by back-driving the master controller. The testing program compared three force reflection levels: 4 to 1 (four units of force on the slave produce one unit of force at the master controller), 1 to 1, and infinity to 1 (no force reflection). Time required to complete tasks, rate of occurrence of errors, the maximum force applied to tasks components, and variability in forces applied to components during completion of representative remote handling tasks were used as dependent variables. Operators exhibited lower error rates, lower peak forces, and more consistent application of forces using force relection than they did without it. These data support the hypothesis that force reflection provides useful information for teleoperator users. The earlier literature and the results of the experiment are discussed in terms of their implications for space based teleoperator systems. The discussion described the impact of force reflection on task completion performance and task strategies, as suggested by the literature. It is important to understand the trade-offs involved in using telerobotic systems with and without force reflection.

Draper, John V.↗

NASA NTRS1988

Properties of interstellar dust in reflection nebulae

Observations of interstellar dust in reflection nebulae are the closest analog in the interstellar medium to studies of cometary dust in our solar system. The presence of a bright star near the reflection nebula dust provides the opportunity to study both the reflection and emission characteristics of interstellar dust. At 0.1 to 1 micrometer, the reflection nebula emission is due to starlight scattered by dust. The albedo and scattering phase function of the dust is determined from observations of the scattered light. At 50 to 200 micrometers, thermal emission from the dust in equilibrium with the stellar radiation field is observed. The derived dust temperature determines the relative values of the absorption coefficient of the dust at wavelengths where the stellar energy is absorbed and at far infrared wavelengths where the absorbed energy is reradiated. These emission mechanisms directly relate to those seen in the near and mid infrared spectra of comets. In a reflection nebula the dust is observed at much larger distances from the star than in our solar system, so that the equilibrium dust temperature is 50 K rather than 300 K. Thus, in reflection nebulae, thermal emission from dust is emitted at 50 to 200 micrometer.

Sellgren, Kristin↗

NASA NTRS1990

Measuring and modeling near-surface reflected and emitted radiation fluxes at the FIFE site

Information is presented pertaining to the measurement and estimation of reflected and emitted components of the radiation balance. Information is included about reflectance and transmittance of solar radiation from and through the leaves of some grass and forb prairie species, bidirectional reflectance from a prairie canopy is discussed and measured and estimated fluxes are described of incoming and outgoing longwave and shortwave radiation. Results of the study showed only very small differences in reflectances and transmittances for the adaxial and abaxial surfaces of grass species in the visible and infrared wavebands, but some differences in the infrared wavebands were noted for the forbs. Reflectance from the prairie canopy changed as a function of solar and view zenith angles in the solar principal plane with definite asymmetry about nadir. The surface temperature of prairie canopies was found to vary by as much as 5 C depending on view zenith and azimuth position and on the solar azimuth. Aerodynamic temperature calculated from measured sensible heat fluxes ranged from 0 to 3 C higher than nadir-viewed temperatures. Models were developed to estimate incoming and reflected shortwave radiation from data collected with a Barnes Modular Multiband Radiometer. Several algorithms for estimating incoming longwave radiation were evaluated and compared to actual measures of that parameter. Net radiation was calculated using the estimated components of the shortwave radiation streams, determined from the algorithms developed, and from the longwave radiation streams provided by the Brunt, modified Deacon, and the Stefan-Boltzmann models. Estimates of net radiation were compared to measured values and found to be within the measurement error of the net radiometers used in the study.

Blad, Blaine L.↗