Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reactive intermediates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Abstract Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd δ + (0< δ <2) that has greatly enhanced activity for methane oxidation: T 50 lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd δ + site is related to its oxygen‐deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

Yang, Weiwei↗
DOE OSTI2022

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, in this paper, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd δ+ (0<δ<2) that has greatly enhanced activity for methane oxidation: T 50 lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd δ+ site is related to its oxygen-deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of supplementary cementitious materials on the degradation of cement-based barriers in radioactive waste repository: A case study in Korea

This study focuses on investigating the chemical degradation characteristics of cementitious barriers used in low- and intermediate-level radioactive waste repository by reactive transport modeling. The impact of the blending with supplementary cementitious materials (SCMs) in the barriers on the chemical degradation was evaluated to find the optimum barrier design. A number of different barrier designs were examined by replacing ordinary Portland cement (OPC) by SCMs (i.e., fly ash, silica fume, and blast-furnace slag). The simulation results showed that silica fume blended barrier has better durability against chemical degradation by rainwater compared to fly ash or blast-furnace slag blended barriers. In addition, the chemical durability of silica fume-based barrier increased with increasing replacement level up to about 20 %. It seems that the amount of formed calcium silicate hydrate (CSH) in the initial cement-based barrier highly affects the overall chemical durability. The newly developed reactive transport model demonstrated its capability for understanding the barrier performance and investigating the optimal design of the barrier system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Using enzymes to tame nitrogen-centred radicals for enantioselective hydroamination

The formation of C–N bonds—of great importance to the pharmaceutical industry—can be facilitated enzymatically using nucleophilic and nitrene transfer mechanisms. However, neither natural nor engineered enzymes are known to generate and control nitrogen-centred radicals, which serve as valuable species for C–N bond formation. Here we use flavin-dependent ‘ene’-reductases with an exogenous photoredox catalyst to selectively generate amidyl radicals within the protein active site. These enzymes are engineered through directed evolution to catalyse 5-exo, 6-endo, 7-endo, 8-endo, and intermolecular hydroamination reactions with high levels of enantioselectivity. Mechanistic studies suggest that radical initiation occurs via an enzyme-gated mechanism, where the protein thermodynamically activates the substrate for reduction by the photocatalyst. Molecular dynamics studies indicate that the enzymes bind substrates using non-canonical binding interactions, which may serve as a handle to further manipulate reactivity. Furthermore, this approach demonstrates the versatility of these enzymes for controlling the reactivity of high-energy radical intermediates and highlights the opportunity for synergistic catalyst strategies to unlock previously inaccessible enzymatic functions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

MARVEL Guard Vessel System FEA and ASME Analysis

The INL is seeking to build the first microreactor in the United States, and the first advanced reactor in over 50 years. With the Microreactor Applications Research, Validation & EvaLuation (MARVEL) Project, this microreactor should be operational within a significantly faster timescale than has ever been seen in the nuclear industry. It uses two passive-convection loops, primarily Sodium Potassium eutectic (NaK), and Ga-In-Sn eutectic as an intermediate fluid. Due to the high reactivity of NaK, the primary coolant loop requires a secondary confinement boundary to prevent uncovering of the core in the event of a NaK leak. This secondary boundary is mostly accomplished through the addition of the Guard Vessel, which is a bucket-like metal containment, which is welded onto the primary boundary to maintain an inert gas environment and pressure

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

In crystallo organometallic chemistry

X-ray crystallography is an invaluable tool in design and development of organometallic catalysis, but application typically requires species to display sufficiently high solution concentrations and lifetimes for single crystalline samples to be obtained. In crystallo organometallic chemistry relies on chemical reactions that proceed within the single-crystal environment to access crystalline samples of reactive organometallic fragments that are unavailable by alternate means. Furthermore, this highlight describes approaches to in crystallo organometallic chemistry including (a) solid–gas reactions between transition metal complexes in molecular crystals and diffusing small molecules, (b) reactions of organometallic complexes within the extended lattices of metal–organic frameworks (MOFs), and (c) intracrystalline photochemical transformations to generate reactive organometallic fragments. Application of these methods has enabled characterization of catalytically important transient species, including σ-alkane adducts of transition metals, metal alkyl intermediates implicated in metal-catalyzed carbonylations, and reactive M–L multiply bonded species involved in C–H functionalization chemistry. Opportunities and challenges for in crystallo organometallic chemistry are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Transient Triplet Metallopnictinidenes M–Pn (M = Pd II , Pt II ; Pn = P, As, Sb): Characterization and Dimerization

Nitrenes (R–N) have been subject to a large body of experimental and theoretical studies. The fundamental reactivity of this important class of transient intermediates has been attributed to their electronic structures, particularly the accessibility of triplet vs singlet states. In contrast, electronic structure trends along the heavier pnictinidene analogues (R–Pn; Pn = P–Bi) are much less systematically explored. We here report the synthesis of a series of metallodipnictenes, {M–Pn=Pn–M} (M = Pd II , Pt II ; Pn = P, As, Sb, Bi) and the characterization of the transient metallopnictinidene intermediates, {M–Pn} for Pn = P, As, Sb. Structural, spectroscopic, and computational analysis revealed spin triplet ground states for the metallopnictinidenes with characteristic electronic structure trends along the series. In comparison to the nitrene, the heavier pnictinidenes exhibit lower-lying ground state SOMOs and singlet excited states, thus suggesting increased electrophilic reactivity. Furthermore, the splitting of the triplet magnetic microstates is beyond the phosphinidenes {M–P} dominated by heavy pnictogen atom induced spin–orbit coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Methyl formate oxidation kinetics up to 100 atm

Methyl formate (MF, CH3OCHO), the simplest ester, is a representative oxygenated fuel with high oxygen content, and low sooting tendency. However, its oxidation behavior under high-pressure and intermediate-temperature conditions remains insufficiently understood, especially where low-temperature peroxy radical chemistry, methanol chemistry, and pressure-dependent reaction pathways play a critical role. In this study, MF oxidation experiments were conducted in the Princeton supercritical-pressure jet-stirred reactor (SP-JSR) at 20 and 100 atm over the temperature range of 400–950 K under both fuel-lean and fuel-rich conditions. Based on the experimental results, an updated HP-Mech was developed by incorporating previous MF sub-mechanisms, expanded low-temperature peroxy pathways, and evaluated pressure-dependent decomposition kinetics. The newly updated HP-Mech shows greatly improved performance in predicting the onset temperature, the key intermediate species fractions, methanol formation, and the progression of MF oxidation across all the experimental conditions. Path flux analysis indicates that MF consumption at the onset stage is dominated by H-abstraction at the methyl site, forming CH2OCHO radicals that lead to the formation and isomerization of O2CH2OCHO, driving low-temperature chain propagation. Moreover, H-abstraction at the formate site forms CH3OCO radicals that preferentially decompose to CH3, initiating the methanol formation pathway linked to CH3O2 and HO2 chemistry. At the same time, HO2 formation is strongly coupled to MF oxidation through multiple MF-derived radical pathways. HCO originates from MF oxidation and acts as a key coupling species linking fuel consumption to HO2 buildup, especially under high-pressure and intermediate-temperature conditions. In addition to this dominant channel, supplementary HO2 formation pathways involving CH3, CH3O, CH2OH, and CH3O2 reacting with O2 further connect methanol chemistry and oxygenated radical chemistry to the HO2 pool, indicating the central role of HO2 in governing MF oxidation. Sensitivity analysis identifies MF with OH/HO2/CH3O2 reactions and the HO2/H2O2/OH sequence as the key factors controlling reactivity in the high-pressure and intermediate-temperature regime. MF directly reacts with OH/HO2/CH3O2 to consume the fuel and produce reactive radicals like CH2OCHO and CH3OCO that undergo subsequent oxidation pathways. Moreover, HO2 recombination suppresses oxidation at lower temperatures, while thermal decomposition of H2O2 accelerates OH production and promotes fuel consumption as temperature increases. The direct formation of active OH from HO2 radicals further completes the mechanism, improving its prediction especially during the oxidation onset stage.

Low-temperature Chemistry↗
DOE OSTI2021

Observing and Modeling the Sequential Pairwise Reactions that Drive Solid‐State Ceramic Synthesis

Abstract Solid‐state synthesis from powder precursors is the primary processing route to advanced multicomponent ceramic materials. Designing reaction conditions and precursors for ceramic synthesis can be a laborious, trial‐and‐error process, as heterogeneous mixtures of precursors often evolve through a complicated series of reaction intermediates. Here, ab initio thermodynamics is used to model which pair of precursors has the most reactive interface, enabling the understanding and anticipation of which non‐equilibrium intermediates form in the early stages of a solid‐state reaction. In situ X‐ray diffraction and in situ electron microscopy are then used to observe how these initial intermediates influence phase evolution in the synthesis of the classic high‐temperature superconductor YBa 2 Cu 3 O 6+ x (YBCO). The model developed herein rationalizes how the replacement of the traditional BaCO 3 precursor with BaO 2 redirects phase evolution through a low‐temperature eutectic melt, facilitating the formation of YBCO in 30 min instead of 12+ h. Precursor selection plays an important role in tuning the thermodynamics of interfacial reactions and emerges as an important design parameter in planning kinetically favorable synthesis pathways to complex ceramic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All experiments are conducted at ambient temperature and follow a similar protocol: (i) application of confining stresses (3MPa) on the fault fully saturated with DI water, (ii) shear-mobilization through the increase of axial loading at a constant displacement rate until a post-peak steady-state condition is reached, (iii) reduction of axial loading and related shear stress to a prescribed fraction of the peak steady-state frictional strength (typically 60% to 90%, representing intermediate to high magnitudes) and (iv), fault reactivation triggered by a stepwise increase of pore pressure on the fault in 0.1 MPa increments held constant for 1-5 minutes. Mechanical data from three ISCO pumps connected to a Temco pressure vessel measure axial, confining, and fault-related parameters, including fluid pressure (kPa), fluid flow rate (mL/min), and axial displacement (mm). See included code for initial data analysis and visualization for select experiments. Resource names represent experiment numbers found in the "Read Me" file, which describes each experimental setup and parameters.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Direct Aerobic Generation of a Ferric Hydroperoxo Intermediate Via a Preorganized Secondary Coordination Sphere

Enzymes exert control over the reactivity of metal centers with precise tuning of the secondary coordination sphere of active sites. One particularly elegant illustration of this principle is in the controlled delivery of proton and electron equivalents in order to activate abundant but kinetically inert oxidants such as O 2 for oxidative chemistry. Chemists have drawn inspiration from biology in designing molecular systems where the secondary coordination sphere can shuttle protons or electrons to substrates. However, a biomimetic activation of O 2 requires the transfer of both protons and electrons, and molecular systems where ancillary ligands are designed to provide both of these equivalents are comparatively rare. Here, we report the use of a dihydrazonopyrrole (DHP) ligand complexed to Fe to perform exactly such a biomimetic activation of O 2 . In the presence of O 2 , this complex directly generates a high spin Fe(III)-hydroperoxo intermediate which features a DHP• ligand radical via ligand-based transfer of an H atom. This system displays oxidative reactivity and ultimately releases hydrogen peroxide, providing insight on how secondary coordination sphere interactions influence the evolution of oxidizing intermediates in Fe-mediated aerobic oxidations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Interactions between molecular-scale processes and hyporheic exchange for understanding Fe-S-C cycling in riparian wetlands (Final Report)

Wetlands represent some of the most productive ecosystems on the planet and critically influence global environmental health. Specifically, wetlands promote water quality by transforming nutrients and organic compounds and sequestering metals and contaminants. Riparian wetland hyporheic zones, where toxic surface water and anoxic groundwater mix, exhibit dynamic conditions that drive steep redox gradients and promote hotspots of diverse and fluctuating microbial activity. Changes in climate, water quality, and water quantity can disturb hydrologic flow and biogeochemical processing in these environments. Understanding how sulfate loading, impacted by hydrologic flux and anthropogenic inputs, influences iron and carbon cycling in wetlands will be crucial for predicting water quality issues driven by iron mineral precipitation and sorption, such as the release of heavy metals and other toxic elements. We used a fully integrated multi-scale and multi-method approach to develop a mechanistic understanding of how hydrologic flow influences coupled iron and sulfur cycles in riparian wetlands. This entailed hydrological, geochemical, and microbial observations at two locations: an anthropogenic sulfate-impacted riparian wetland in northern Minnesota, and a low-sulfate Fe-rich riparian wetland in Tims Branch at the Savannah River Site (SRS). These sites were characterized by hydrologically dynamic conditions where the stream and wetland systems oscillated between gaining (upward flow) and losing (downward flow) conditions that recharged the system occasionally with oxidants that fueled a variety of biogeochemical reactions. Aqueous geochemical measurements of surface water, groundwater, and porewater samples were made alongside solid-phase geochemical analyses of sediment gravity cores. Bulk X-ray absorption spectroscopy at the Advanced Photon Source (APS; Argonne) interrogated the speciation and distribution of Fe and S mineral phases of the sediments. Interestingly, it was discovered that, despite strongly reducing conditions, Fe(III) compounds and a variety of intermediate valence S compounds were stable in the subsurface. Indeed, compounds like thiosulfate, S(0), and intermediate valence organosulfur compounds were more prevalent than FeS and pyrite. The composition of the sediments did change with changes in hydrologic flow, showing their reactivity in changing redox conditions. The abundance of these intermediate S compounds was likely formed as a result of anaerobic oxidation by aqueous and solid-phase Fe(III) compounds, fueling a cryptic S cycle that is driving the breakdown of organic matter in the hyporheic zone. Microbiome surveys showed a core community that seemed stable across the landscape, but changed with increasing depth into the sediment. The community composition did not seem to change dramatically with changes in season or hydrologic flow, except for some organisms that have the potential to contribute to S cycling. More work is needed to confirm their functional activity. These fine process-scale analyses were placed within a dynamic field context using physical flow parameters from surface water and groundwater level measurements. These data helped shed light on sulfur-driven biogeochemical processes in hydrologically dynamic riparian wetlands, addressing a gap in our understanding about the impacts of pollution and other anthropogenic changes on ecologically sensitive environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Functionalized Hydroperoxide Formation from the Reaction of Methacrolein-Oxide, an Isoprene-Derived Criegee Intermediate, with Formic Acid: Experiment and Theory

Methacrolein oxide (MACR-oxide) is a four-carbon, resonance-stabilized Criegee intermediate produced from isoprene ozonolysis, yet its reactivity is not well understood. This study identifies the functionalized hydroperoxide species, 1-hydroperoxy-2-methylallyl formate (HPMAF), generated from the reaction of MACR-oxide with formic acid using multiplexed photoionization mass spectrometry (MPIMS, 298 K = 25 °C, 10 torr = 13.3 hPa). Electronic structure calculations indicate the reaction proceeds via an energetically favorable 1,4-addition mechanism. The formation of HPMAF is observed by the rapid appearance of a fragment ion at m/z 99, consistent with the proposed mechanism and characteristic loss of HO2 upon photoionization of functional hydroperoxides. The identification of HPMAF is confirmed by comparison of the appearance energy of the fragment ion with theoretical predictions of its photoionization threshold. The results are compared to analogous studies on the reaction of formic acid with methyl vinyl ketone oxide (MVK-oxide), the other four-carbon Criegee intermediate in isoprene ozonolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isolation and Structural Elucidation of 15–Nuclear Copper Dihydride Clusters: An Intermediate in the Formation of a Two–Electron Copper Superatom

Highly reactive copper-dihydride clusters, [Cu 15 (H) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ](PF 6 ) {R = n Bu (1 H ), n Pr (2 H ), i Bu (3 H )}, are isolated during the reaction of [Cu 28 H 15 {S 2 CN n Bu 2 } 12 ](PF 6 ) with ten equivalents of phenylacetylene. They are found to be intermediates in the formation of the earlier reported two-electron superatom [Cu 13 (S 2 CNR 2 ) 6 (C 2 Ph) 4 ] + . Better yields are obtained by reacting dithiocarbamate sodium salts, [Cu(CH 3 CN) 4 ](PF 6 ), BH 4 – and phenylacetylene. The presence of two hydrides in the isolated clusters is confirmed by the synthesis and characterization of its deuteride analogue [Cu 15 (D) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ] + , and a single-crystal neutron structure of 2 H . Structural characterization of 1 H reveals a new bicapped icosahedral copper(I) cage encapsulating a linear copper dihydride (CuH 2 ) – unit. In conclusion, reaction of 3 H with Au(I) salts yields a highly luminescent [AuCu 12 (S 2 CNiBu 2 ) 6 (C 2 Ph) 4 ] + cluster.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Isomeric effects on the reactivity of branched alkenes: An experimental and kinetic modeling study of methylbutenes

Here, a detailed experimental study of the low-to-intermediate temperature combustion of methylbutene isomers, i.e., branched C 5 alkenes, has been undertaken with multiple experimental facilities. Ignition delay times were measured at equivalence ratios 0.5–2.0, 685–1020 K and up to 45 bar condition from two rapid compression machines and showed slight deviation from an Arrhenius behavior for all three isomers, while their reactivity order differs as temperature changes. Sampled intermediates formed during the oxidation process of mixtures at 900–1150 K and 0.82 bar from a flow reactor and at 730 K and 20 bar from a rapid compression machine were analyzed using gas chromatography techniques. Trends in the formation and consumption of sampled intermediates were modeled using a kinetic model developed in this work for all three isomers. Rate of production and sensitivity analyses emphasize the role of double bond-specific reactions governing the global reactivity of these fuels. Additional studies of the addition reactions of HO 2 radicals to the double bond and to allylic radicals may improve the model performance.

2-Methyl-1-butene↗
DOE OSTI2020

Stabilization of Photocatalytically Active Uranyl Species in a Uranyl–Organic Framework for Heterogeneous Alkane Fluorination Driven by Visible Light

When photoactivated, the uranyl ion is a robust oxidant capable of abstracting hydrogen atoms from nonactivated C–H bonds. Yet, the highly reactive singly reduced [U V O 2 ] + intermediate is unstable with respect to disproportionation to the uranyl dication and insoluble tetravalent uranium phases, which limits the usage of uranyl ions as robust photocatalysts. Herein, we demonstrate that photoactivated uranyl ions can be stabilized by immobilizing and separating them spatially in a uranyl–organic framework heterogeneous catalyst, NU-1301. The visible-light-photoactivated uranyl ions in NU-1301 demonstrated longer-lived U(V) and radicals than those in homogeneous counterparts, as evidenced by X-ray photoelectron spectroscopy and time-dependent electron paramagnetic resonance, leading to higher turnovers and enhanced stability for the fluorination of nonactivated alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Silica accelerates the selective hydrogenation of CO 2 to methanol on cobalt catalysts

The reaction pathways on supported catalysts can be tuned by optimizing the catalyst structures, which helps the development of efficient catalysts. Such design is particularly desired for CO 2 hydrogenation, which is characterized by complex pathways and multiple products. Here, we report an investigation of supported cobalt, which is known for its hydrocarbon production and ability to turn into a selective catalyst for methanol synthesis in CO 2 hydrogenation which exhibits good activity and stability. The crucial technique is to use the silica, acting as a support and ligand, to modify the cobalt species via Co-O-SiOn linkages, which favor the reactivity of spectroscopically identified *CH 3 O intermediates, that more readily undergo hydrogenation to methanol than the C-O dissociation associated with hydrocarbon formation. Cobalt catalysts in this class offer appealing opportunities for optimizing selectivity in CO 2 hydrogenation and producing high-grade methanol. By identifying this function of silica, we provide support for rationally controlling these reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The role of transition metal formyl intermediates in the reduction of CO and CO 2

Transition-metal formyl (metalloformyl) complexes occupy a central position in the activation of small molecules, particularly in the reduction of carbon monoxide (CO) and carbon dioxide (CO 2 ). This review examines five decades of progress in the synthesis of metalloformyl complexes and investigations into their structure and reactivity. The bonding in the M–CHO unit is best described as a resonance hybrid between a classical σ-bound formyl ligand and an oxycarbene-like electronic structure, which governs their distinctive spectroscopic signatures and versatile reactivity. Established synthetic routes are summarized, including pathways involving hydride addition and CO insertion, alongside a discussion of the thermodynamic and kinetic factors that control formyl stability. Decomposition pathways and Lewis-acid stabilization strategies are analyzed as key design principles for extending metalloformyl lifetimes under catalytic conditions. Particular attention is given to hydride transfer processes and the role of metalloformyl intermediates as both reactive substrates and hydride sources in reduction chemistry. Lastly, emerging catalytic strategies that exploit metalloformyl intermediates in CO 2 and CO reduction are evaluated, highlighting how control of hydricity, redox potential, and secondary-sphere interactions enables selective C—H bond formation under comparatively mild conditions. Collectively, these studies establish metalloformyl complexes as mechanistically informative and functionally relevant intermediates that bridge fundamental organometallic chemistry with modern approaches to small-molecule activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗