Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Quantifying Percolated Triple Phase Boundary Density and Its Effects on Anodic Polarization in Ni-Infiltrated Ni/YSZ SOFC Anodes

Increasing the density of percolated triple phase boundaries (TPBs) by infiltrating nanoscale electrocatalysts can improve the performance of solid oxide fuel cell (SOFC) anodes. However, the complex microstructure of these infiltrated nanocatalysts creates challenges in quantifying their role in anode performance improvements. In this research, scanning electron microscopy of fractured cross-sections of a Ni-nanocatalyst infiltrated anodic symmetric cell along with three-dimensional (3-D) reconstruction of the same anode have been used to quantify the changes in percolated TPB densities due to infiltration. This change in percolated TPB density has been compared to the improvement in anode activation polarization resistance measured by electrochemical impedance spectroscopy (EIS). It was found that increased TPB densities only partially accounted for the measured performance improvement. Distribution of relaxation times (DRT) analyses showed that a reduction in the time constants of the catalytic processes in the anode also play a role, suggesting that the added nanoscale percolated TPB boundaries are more electrochemically active as compared to the cermet TPB boundaries.

25 ENERGY STORAGE↗

Hydrogen Component Performance Diagnostic Testing (CRADA CRD-18-743 Final Report)

H2@Scale is focused on the wide scale adoption of hydrogen as a flexible energy storage medium. Due to the low volumetric energy density of gaseous hydrogen, compressors are an essential component of hydrogen storage. Hydrogen compressors that support a flexible grid and on-demand vehicle fueling undergo challenging operating conditions, such as a high number of start and stop cycles and wide input and discharge pressure ranges. Equally robust components are required for these conditions while still meeting the financial requirements of sustainable hydrogen compression.

08 HYDROGEN↗

A Catalog of Distance Determinations for the LAMOST DR8 K Giants in the Galactic Halo

We present a catalog of distances for 19,544 K giants drawn from Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) DR8. Most of them are located in the halo of the Milky Way up to ~120 kpc. There are 15% K giants without Sloan Digital Sky Survey (SDSS) photometry, for which we supplements with Pan-STARRS1 (PS1) photometry calibrated to SDSS photometric system. The possible contamination of the red clumps/horizontal branch are removed according to metallicities and colors before the distance determination. Combining the LAMOST spectroscopic metallicities with the SDSS/PS1 photometry, we estimate the absolute magnitudes in the SDSS r band, the distance moduli, and the corresponding uncertainties through an Bayesian approach devised by Xue et al. for the Sloan Extension for Galactic understanding and exploration halo K giants. The typical distance precision is about 11%. The stars in the catalog lie in a region of 4–126 kpc from the Galactic center, of which with 6320 stars beyond 20 kpc and 273 stars beyond 50 kpc, forming the largest spectroscopic sample of distant tracers in the Milky Way halo so far.

79 ASTRONOMY AND ASTROPHYSICS↗

Data-driven Stellar Models

We developed a data-driven model to map stellar parameters ( T eff , log g , and [Fe/H]) accurately and precisely to broadband stellar photometry. This model must, and does, simultaneously constrain the passband-specific dust reddening vector in the Milky Way, R. The model uses a neural network to learn the (de-reddened) absolute magnitude in one band and colors across many bands, given stellar parameters from spectroscopic surveys and parallax constraints from Gaia. To demonstrate the effectiveness of this approach, we train our model on a data set with spectroscopic parameters from LAMOST, APOGEE, and GALAH, Gaia parallaxes, and optical and near-infrared photometry from Gaia, Pan-STARRS 1, Two Micron All Sky Survey and Wide-field Infrared Survey Explorer. Testing the model on these data sets leads to an excellent fit and a precise—and by construction—accurate prediction of the color–magnitude diagrams in many bands. This flexible approach rigorously links spectroscopic and photometric surveys, and also results in an improved, T eff -dependent R. As such, it provides a simple and accurate method for predicting photometry in stellar evolutionary models. Our model will form a basis to infer stellar properties, distances, and dust extinction from photometric data, which should be of great use in 3D mapping of the Milky Way. Our trained model can be obtained at doi:10.5281/zenodo.3902382.

79 ASTRONOMY AND ASTROPHYSICS↗

Stellar Abundance Maps of the Milky Way Disk

To understand the formation of the Milky Way's prominent bar it is important to know whether stars in the bar differ in the chemical element composition of their birth material as compared to disk stars. This requires stellar abundance measurements for large samples across the Milky Way's body. Such samples, e.g., luminous red giant stars observed by the Sloan Digital Sky Survey's APOGEE survey, will inevitably span a range of stellar parameters; as a consequence, both modeling imperfections and stellar evolution may preclude consistent and precise estimates of their chemical composition at a level of purported bar signatures, which has left current analyses of a chemically distinct bar inconclusive. Here, we develop a new self-calibration approach to eliminate both modeling and astrophysical abundance systematics among red giant branch (RGB) stars of different luminosities (and hence surface gravity $\mathrm{log} g$). We apply our method to 48,853 luminous APOGEE Data Release 16 RGB stars to construct spatial abundance maps of 20 chemical elements near the Milky Way's mid-plane, covering galactocentric radii of 0 kpc < R GC < 20 kpc. Our results indicate that there are no abundance variations whose geometry matches that of the bar, and that the mean abundance gradients vary smoothly and monotonically with galactocentric radius. We confirm that the high-α disk is chemically homogeneous, without spatial gradients. Furthermore, we present the most precise [Fe/H] versus R GC gradient to date with a slope of – 0.057 ±0.001 dex kpc –1 out to approximately 15 kpc.

79 ASTRONOMY AND ASTROPHYSICS↗

The Poor Old Heart of the Milky Way

Our Milky Way should host an ancient, metal-poor, and centrally concentrated stellar population, which reflects the star formation and enrichment in the few most massive progenitors that coalesced at high redshift to form the proto-Galaxy. While metal-poor stars are known to reside in the inner few kiloparsecs of our Galaxy, current data do not yet provide a comprehensive picture of such a metal-poor "heart" of the Milky Way. We use information from Gaia Data Release 3, especially the XP spectra, to construct a sample of 2 million bright (G BP < 15.5 mag) giant stars within 30° of the Galactic center (GC) with robust [M/H] estimates, δ[M/H] ≲ 0.1. For ~1.25 million stars we calculate orbits from Gaia Radial Velocity Spectrometer velocities and astrometry. This sample reveals an extensive, ancient, and metal-poor population that includes ~18,000 stars with -2.7 < [M/H] < -1.5, representing a stellar mass of ≳5 × 10 7 M ⊙ . The spatial distribution of these [M/H] < -1.5 stars has a Gaussian extent of only σ R$_{GC}$ around the GC, with most orbits confined to the inner Galaxy. At high orbital eccentricities, there is clear evidence for accreted halo stars in their pericentral orbit phase. Most stars show [α/Fe] enhancement and [Al/Fe]–[Mn/Fe] abundances expected for an origin in the more massive portions of the proto-Galaxy. Stars with [M/H] < -2 show no net rotation, whereas those with [M/H] ~ -1 are rotation dominated. These central, metal-poor stars most likely predate the oldest disk population (τ age ≈ 12.5 Gyr), which implies that they formed at z ≳ 5, forging the proto-Milky Way.

79 ASTRONOMY AND ASTROPHYSICS↗

Distant Echoes of the Milky Way’s Last Major Merger

The majority of the Milky Way’s stellar halo consists of debris from our galaxy’s last major merger, the Gaia-Sausage-Enceladus (GSE). In the past few years, stars from the GSE have been kinematically and chemically studied in the inner 30 kpc of our galaxy. However, simulations predict that accreted debris could lie at greater distances, forming substructures in the outer halo. Here we derive metallicities and distances using Gaia DR3 XP spectra for an all-sky sample of luminous red giant stars, and map the outer halo with kinematics and metallicities out to 100 kpc. We obtain follow-up spectra of stars in two strong overdensities—including the previously identified outer Virgo Overdensity—and find them to be relatively metal rich and on predominantly retrograde orbits, matching predictions from simulations of the GSE merger. We argue that these are apocentric shells of GSE debris, forming 60–90 kpc counterparts to the 15–20 kpc shells that are known to dominate the inner stellar halo. Extending our search across the sky with literature radial velocities, we find evidence for a coherent stream of retrograde stars encircling the Milky Way from 50 to 100 kpc, in the same plane as the Sagittarius Stream but moving in the opposite direction. These are the first discoveries of distant and structured imprints from the GSE merger, cementing the picture of an inclined and retrograde collision that built up our galaxy’s stellar halo.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectacular Nucleosynthesis from Early Massive Stars

Abstract Stars that formed with an initial mass of over 50 M ⊙ are very rare today, but they are thought to be more common in the early Universe. The fates of those early, metal-poor, massive stars are highly uncertain. Most are expected to directly collapse to black holes, while some may explode as a result of rotationally powered engines or the pair-creation instability. We present the chemical abundances of J0931+0038, a nearby low-mass star identified in early follow-up of the SDSS-V Milky Way Mapper, which preserves the signature of unusual nucleosynthesis from a massive star in the early Universe. J0931+0038 has a relatively high metallicity ([Fe/H] = −1.76 ± 0.13) but an extreme odd–even abundance pattern, with some of the lowest known abundance ratios of [N/Fe], [Na/Fe], [K/Fe], [Sc/Fe], and [Ba/Fe]. The implication is that a majority of its metals originated in a single extremely metal-poor nucleosynthetic source. An extensive search through nucleosynthesis predictions finds a clear preference for progenitors with initial mass >50 M ⊙ , making J0931+0038 one of the first observational constraints on nucleosynthesis in this mass range. However, the full abundance pattern is not matched by any models in the literature. J0931+0038 thus presents a challenge for the next generation of nucleosynthesis models and motivates the study of high-mass progenitor stars impacted by convection, rotation, jets, and/or binary companions. Though rare, more examples of unusual early nucleosynthesis in metal-poor stars should be found in upcoming large spectroscopic surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasar microlensing and dark matter

The amplification of quasar brightness due to gravitational lensing by foreground objects is discussed. It is shown that a recently published sample of X-ray-selected quasars behind foreground galaxies shows a statistically significant brightening compared to a control sample. Correlations with galaxy redshift and impact parameter predicted by microlensing are also demonstrated. A technique is described to measure the mean density of the lenses from a small number of identified cases of microlensing. It is shown that, in this sample, amplification bias is important in determining the mean intensity enhancement and must be included in the density estimate. Assuming that at least two of the four intrinsically brightest quasars behind galaxies are indeed microlensed, the present data yield a formal lower limit on the mean density parameter of lenses Omega(l) greater than 0.25 at 95 percent confidence. These data also imply that a considerable quantity of dark matter exists in macroscopic objects outside the visible parts of galaxies but is still highly correlated with them.

Rix, Hans-Walter↗

Design and analysis of composite primary structures for advanced launch vehicles

The current status of the Lightweight Composite Intertank Structures (LCIS) study, a program aimed at developing technologies required to apply advanced composite materials to launch vehicle primary structures, is reviewed. The launch system concept used for establishing design requirements consisted of a fully reusable winged booster and a partially reusable core vehicle. The component selected from this system for design and manufacturing studies was the core vehicle intertank adapter, a component consisting of approximately 26-ft diameter by 25 ft long stiffened cylindrical structure that separates the liquid hydrogen and liquid oxygen tanks on the core vehicle. The discussion covers the program approach, design requirements, material properties, structural analysis, and the test program.

Rix, C.↗

An infrared/optical investigation of 100 micron 'cirrus'

IRAS Skyflux images, in conjunction with ESO/SRC photographic plates, are presently used to study a sample of 151 compact cyrrus sources. IR colors entail at least two dust components; a simple two-temperature dust model yields a mean physical temperature of 22.5 + or - 0.3 K for the warm dust, and 173 + or - 8 K for the hot dust, which constitutes 15-42 percent of total IR luminosity. A variable proportion of cold dust may contribute significantly to the optical brightness in two isolated cloud complexes.

Paley, Elizabeth S.↗

Hubble Space Telescope Wide Field Camera imaging of the gravitational lens 2237 + 0305

Images of the gravitational lens system 2237 + 0305, taken with the HST Wide Field Camera, are analyzed. Positions for the four quasar images, accurate to +/-0.015 arcsec, and relative magnitudes in U and R, accurate to +/-0.06 and 0.04 mag, respectively, are determined. The upper limits on the observed brightness of the fifth image are found to be less than or approximately equal to 7 percent of the brightest quasar image. The mass of the lens inside 0.9 arcsec is found to be 1.08 +/-0.02 x 10 exp 10 solar masses/h100 corresponding to a mass-to-light ratio in B of 12.3h100. This solar mass/solar luminosity estimate agrees with values obtained from stellar dynamics for other elliptical galaxies. A comparison of predictions from this mass model with the measured central velocity dispersion yields a distance-independent agreement to within 10 percent, assuming isotropic velocity dispersions.

Rix, Hans-Walter↗

NGC 4550 - A laboratory for testing galaxy formation

The kinematic and photometric structure of the two components of the E7/S0 galaxy NGC 4550 are evaluated quantitatively to determine the system's morphology. Attention is given to whether the data indicate a rotating bulge with a counterrotating disk or a pair of counterstreaming disks, and formation scenarios are discussed in the light of the findings. The data examined include long-slit spectroscopy with evidence of bimodality in the line-of-sight velocity distribution. Two photometrically inseparable counterstreaming disk components are identified and their velocities given. The structure and the formation scenarios given point to the feasibility of absorption of external material by galaxy disks without extreme heating. The possibility of detecting stellar counterrotation in S0 disks is discussed based on the study of NGC 4550.

Rix, Hans-Walter↗

Mapping the stellar backbones of spiral galaxies

We present optical and IR surface photometry of M51 (NGC 5194) at B, V, R, I, J, K, and CO. These data are used to establish whether K-band images of spiral galaxies provide reliable maps of stellar surface mass density features such as massive spiral arms or bars. The main distorting agents in the mapping at shorter wavelengths are dust extinction and luminous young stars. From modeling the color changes across the main dust lanes in M51, we find the optical depths to be about 0.5 in the K band. For these optical depths the K-band flux is attenuated by only less than 10 percent even in the dust lanes. From monitoring the gravity-sensitive CO index across the spiral arms we find that young red supergiants do not significantly distort the K-band image. On this basis, we conclude that K-band images do trace the massive disk star population and allow to map azimuthal variation in the surface mass density of the stellar disk. In M51 we find the surface mass density contrast to range from 1.8 to 3, as expected from N-body simulations of the galaxy's tidal encounter with NGC 5195. The spiral arm amplitude in M51 clearly shows smooth, strong radial variations, with a maximum at about 130 arcsec and minima at 45 and 170 arcsec.

Rix, Hans-Walter↗

Rule based design of conceptual models for formative evaluation

A Human-Computer Interface (HCI) Prototyping Environment with embedded evaluation capability has been investigated. This environment will be valuable in developing and refining HCI standards and evaluating program/project interface development, especially Space Station Freedom on-board displays for payload operations. This environment, which allows for rapid prototyping and evaluation of graphical interfaces, includes the following four components: (1) a HCI development tool, (2) a low fidelity simulator development tool, (3) a dynamic, interactive interface between the HCI and the simulator, and (4) an embedded evaluator that evaluates the adequacy of a HCI based on a user's performance. The embedded evaluation tool collects data while the user is interacting with the system and evaluates the adequacy of an interface based on a user's performance. This paper describes the design of conceptual models for the embedded evaluation system using a rule-based approach.

Moore, Loretta A.↗

Galaxy mergers and gravitational lens statistics

We investigate the impact of hierarchical galaxy merging on the statistics of gravitational lensing of distant sources. Since no definite theoretical predictions for the merging history of luminous galaxies exist, we adopt a parameterized prescription, which allows us to adjust the expected number of pieces comprising a typical present galaxy at z approximately 0.65. The existence of global parameter relations for elliptical galaxies and constraints on the evolution of the phase space density in dissipationless mergers, allow us to limit the possible evolution of galaxy lens properties under merging. We draw two lessons from implementing this lens evolution into statistical lens calculations: (1) The total optical depth to multiple imaging (e.g., of quasars) is quite insensitive to merging. (2) Merging leads to a smaller mean separation of observed multiple images. Because merging does not reduce drastically the expected lensing frequency, it cannot make lambda-dominated cosmologies compatible with the existing lensing observations. A comparison with the data from the Hubble Space Telescope (HST) Snapshot Survey shows that models with little or no evolution of the lens population are statistically favored over strong merging scenarios. A specific merging scenario proposed to Toomre can be rejected (95% level) by such a comparison. Some versions of the scenario proposed by Broadhurst, Ellis, & Glazebrook are statistically acceptable.

Rix, Hans-Walter↗

Detection of compact ultraviolet nuclear emission in liner galaxies

Low-ionization nuclear emission-line regions (LINERs), which exist in a large fraction of galaxies, may be the least luminous manifestation of quasar activity. As such, they may make possible the study of the active galactic nucleus (AGN) phenomenon in the nearest galaxies. The nature of LINERs has, however, remained controversial because an AGN-like nonstellar continuum source has not been directly observed in them. We report the detection of bright (greater than or approximately = 2 x 10(exp -16) ergs/s/sq cm/A), unresolved (full width at half maximum (FWHM) less than or approximately = 0.1 sec) point sources of UV (approximately 2300 A) emission in the nuclei of nine nearby galaxies. The galaxies were imaged using the Faint Object Camera (FOC) on the Hubble Space Telescope (HST), and seven of them are from a complete sample of 110 nearby galaxies that was observed with HST. Ground-based optical spectroscopy reveals that five of the nuclei are LINERs, three are starburst nuclei, and one is a Seyfert nucleus. The observed UV flux in each of the five LINERs implies an ionizing flux that is sufficient to account to the observed emission lines through photoionization. The detection of a strong UV continuum in the LINERs argues against shock excitation as the source of the observed emission lines, and supports the idea that photoionization excites the lines in at least some objects of this class. We have analyzed ground-based spectra for most of the northern-hemisphere galaxies in the HST sample and find that 26 of them are LINERs, among which only the above five LINERs have a detected nuclear UV source.

Maoz, Dan↗

Modular transportable superconducting magnetic energy systems

Design and cost studies were performed for the magnet components of mid-size (1-5 MWh), cold supported SMES systems using alternative configurations. The configurations studied included solenoid magnets, which required onsite assembly of the magnet system, and toroid and racetrack configurations which consisted of factory assembled modules. For each configuration, design concepts and cost information were developed for the major features of the magnet system including the conductor, electrical insulation, and structure. These studies showed that for mid-size systems, the costs of solenoid and toroid magnet configurations are comparable and that the specific configuration to be used for a given application should be based upon customer requirements such as limiting stray fields or minimizing risks in development or construction.

Lieurance, Dennis↗