Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIATION SPECTRUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Si-based materials for lithium-ion batteries II. Surface-modified Si/C/polyethylene glycol powder

X-ray photoelectron spectroscopy was used to analyze Si/C/polyethylene glycol powder obtained from Paraclete Energy, Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals, with only minor calcium and nitrogen signal, and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries III: Surface-modified Si/C/polyvinylidine difluoride powder

X-ray photoelectron spectroscopy was used to analyze Si/C/polyvinylidine difluoride powder obtained from Paraclete Energy Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with F 1s, O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected silicon-carbon and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries IV: Surface-modified Si/C/perfluorooctene powder

X-ray photoelectron spectroscopy was used to analyze nano-Si/C/perfluorooctene powder obtained from Paraclete Energy Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with F 1s, O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected silicon-carbon, carbon-fluorine, and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries V. n-SiO powder

X-ray photoelectron spectroscopy was used to analyze Si powders that have a native oxide surface, obtained from Paraclete Energy, Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected oxidized carbon and silicon species related to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries VI. 15% surface-modified Si/C-graphite/carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 15%Si/C-graphite/carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.83 401 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. The spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen and lithium signals and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure as well contributions related to the binder material.

17 WIND ENERGY↗
DOE OSTI2020

Si-based materials for lithium-ion batteries VII. 70% surface-modified Si/C-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy (XPS) was used to analyze a 70% Si/C-carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor copper, nitrogen, calcium, and lithium signals and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure as well contributions related to the binder material.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries VIII. 90% surface-modified Si/C-lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 90% Si/C-lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor lithium signal and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure as well contributions related to the binder material.

25 ENERGY STORAGE↗
DOE OSTI2020

Si-based materials for lithium-ion batteries IX: 70% surface-modified Si/C/polyethylene glycol-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 70% Si/C-carbon black/polyethylene glycol/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping Facility (CAMP), Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey scan was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor copper and lithium signals and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure as well as contributions related to the binder material.

25 ENERGY STORAGE↗
DOE OSTI2023

Enhancing photonic systems using topology and non-Hermiticity

The broad goal of this project was to develop new analytical and numerical insights for how important photonic processes can be improved using recently discovered principles in topological and non-Hermitian physics. In particular, there are two recent discoveries that we aimed to harness to achieve this goal. First, it was discovered in condensed matter physics that crystalline symmetries can protect low-dimensional topologically protected states in lattices without the need for breaking time-reversal symmetry. These so-called ‘higher-order’ topological systems represent an important development for photonic systems, where it is very difficult to break time-reversal symmetry, and which had been previously thought necessary to realize topological phenomena. Second, the last decade has seen a significant amount of interest in phenomena which are unique to non-Hermitian systems, i.e., systems which do not conserve energy. For example, spatially patterned gain and loss can be used to realize exceptional points, which are degeneracies in a system’s spectrum where the system becomes defective, while the existence of radiative losses also enables a new route to confinement through bound states in the continuum. For such non-Hermitian phenomena, photonics again represents a critical platform, as photonic systems naturally lose light to their radiative environments, making them generally non-Hermitian, and it is also possible to incorporate additional gain or loss. Based on these broad principles, we pursued a range of projects to harness bound states in the continuum in a variety of different systems and architectures, develop real-space methods for classifying topological systems to yield better photonic design principles, and a novel Brillouin-based fiber laser for sensing strain.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Augmented Human Analysis (AHA)

Radio frequency (RF) signal monitoring generally emphasizes intentionally generated signals, such as WiFi, Bluetooth, or cellular transmissions. However, electronic devices also produce unintended radiated emissions (UREs), which could also be useful in RF spectrum analysis. In either case, deriving intelligence from RF signals is typically a human-intensive process requiring significant domain knowledge. In the Augmented Human Analysis (AHA) project, we investigate the utility of dimensionally aligned signal projection (DASP) and machine learning (ML) algorithms for accelerating RF analysis workflows. We find that while DASP algorithms can indeed highlight signal characteristics relevant for classification tasks, the choice of algorithmic hyperparameters greatly affects performance. To address this challenge, we evaluate the quality of DASP outputs using the silhouette score, which measures how well data points cluster; high silhouette scores indicate good clustering, and thus good hyperparameter values. This approach is critical for machine learning pipelines as the DASP parameters cannot be directly optimized during model training. By identifying good DASP parameters, and thus good DASP outputs, as a preprocessing step, we can decrease the amount of effort required for downstream ML model training. We demonstrate our workflow using a dataset of UREs from common household devices, showing that even without the aid of ML, proper selection of DASP parameters enables clustering by device type.

42 ENGINEERING↗
DOE OSTI2020

GeV–TeV Counterparts of SS 433/W50 from Fermi -LAT and HAWC Observations

The extended jets of the microquasar SS 433 have been observed in optical, radio, X-ray, and recently very-high-energy γ-rays by High Altitude Water Cerenkov (HAWC). The detection of HAWC γ-rays with energies as great as 25 TeV motivates searches for high-energy γ-ray counterparts in the Fermi-Large Area Telescope (LAT) data in the 100 MeV–300 GeV band. In this paper, we report on the first joint analysis of Fermi-LAT and HAWC observations to study the spectrum and location of γ-ray emission from SS 433. Our analysis finds common emission sites of GeV-to-TeV γ-rays inside the eastern and western lobes of SS 433. The total flux above 1 GeV is $\sim 1\times {10}^{-10}\,{\mathrm{cm}}^{-2}\,{{\rm{s}}}^{-1}$ in both lobes. The γ-ray spectrum in the eastern lobe is consistent with inverse Compton emission by an electron population that is accelerated by jets. To explain both the GeV and TeV flux, the electrons need to have a soft intrinsic energy spectrum, or undergo a quick cooling process due to synchrotron radiation in a magnetized environment.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Synchrotron Polarization Signatures of Surface Waves in Supermassive Black Hole Jets

Abstract Supermassive black holes in active galactic nuclei are known to launch relativistic jets, which are observed across the entire electromagnetic spectrum and thought to be efficient particle accelerators. Their primary radiation mechanism for radio emission is polarized synchrotron emission produced by a population of nonthermal electrons. In this Letter, we present a global general relativistic magnetohydrodynamical (GRMHD) simulation of a magnetically arrested disk (MAD). After the simulation reaches the MAD state, we show that waves are continuously launched from the vicinity of the black hole and propagate along the interface between the jet and the wind. At this interface, a steep gradient in velocity is present between the mildly relativistic wind and the highly relativistic jet. The interface is, therefore, a shear layer, and due to the shear, the waves generate roll-ups that alter the magnetic field configuration and the shear layer geometry. We then perform polarized radiation transfer calculations of our GRMHD simulation and find signatures of the waves in both total intensity and linear polarization, effectively lowering the fully resolved polarization fraction. The telltale polarization signatures of the waves could be observable by future very long baseline interferometric observations, e.g., the next-generation Event Horizon Telescope.

Astronomy & Astrophysics↗
DOE OSTI2025

Analytical Approximations for Beamstrahlung at Very High Energy Electron-Positron Colliders

Among the many effects that occur in beam-beam electron-positron collisions at TeV energies, emission of hard synchrotron radiation, or beamstrahlung, has special importance. Beamstrahlung determines the energy spectrum of the most energetic electrons, positrons, and photons and supplies the initial condition for the calculation of all other QED processes. In this paper, we show that the description of beamstrahlung simplifies in the limit of large quantum parameter $Υ$, which is realized in 10 TeV collider designs. The beamstrahlung spectra for electrons and photons are given in terms of universal functions. We supply approximations to these functions that will be useful for more general studies of the beam-beam interaction at very high energies.

Accelerator Physics (physics.acc-ph)↗
DOE OSTI2021

A temperature profile diagnostic for radiation waves on OMEGA-60

Predicting and matching radiation wave propagation with computational models has proven difficult. Information provided by experiments studying radiation flow has been limited when only radiation breakout is measured. We have developed the COAX (co-axial) diagnostic platform to provide spatial temperature profiles of a radiation wave through low density foams as a more detailed constraint for simulations. COAX uses a standard, laser-driven OMEGA-60 halfraum to drive radiation down a titanium-laden silicon oxide foam. Point-projection X-ray absorption spectroscopy perpendicular to the radiation flow measures the spatial profile of titanium ionization. The spectroscopic measurement utilizes a broadband capsule backlighter. Imaging and streak spectroscopy are used to characterize the size and spectrum of this source. Radiography provides an additional constraint by capturing the developing shock as the radiation flow becomes subsonic. The DANTE diagnostic is used to measure the halfraum temperature. Here, we provide a spectroscopic analysis of COAX data to determine temperature, and we describe experimental sources of uncertainty. The temperature is obtained by comparison to multi-temperature synthetic spectra post-processed from radiation-hydrodynamics simulations. Quantitative comparison between data and synthetic spectra generated from temperature profiles at relevant simulation times enable determination of a peak temperature of 114 ± 8 eV at 265 ± 22.4 μm from the halfraum. This represents an improvement over the temperature uncertainties of previous radiation flow experiments. Further refinements to the spectroscopic analysis could achieve ±4 eV. The combination between space-resolved spectroscopy and radiography enables us to determine the distance from the halfraum of both the radiation front and the shock front at the time of measurement. For the example shown in this paper the radiation front position is 600–630 μm at 3.43 ± 0.16 ns and the shock front position is 633 μm at 3.3 ± 0.24 ns.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

AXIOM Unfold 0.7.0, Users Manual

The AXIOM-Unfold application is a computational code for performing spectral unfolds along with uncertainty quantification of the photon spectrum. While this code was principally designed for spectral unfolds on the Saturn source, it is also relevant to other radiation sources such as Pithon. This code is a component of the AXIOM project which was undertaken in order to measure the time-resolved spectrum of the Saturn source; to support this, the AXIOM-Unfold code is able to process time-dependent dose measurements in order to obtain a time-resolved spectrum. This manual contains a full description of the algorithms used by the method. The code features are fully documented along with several worked examples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Eco-friendly passive radiative cooling using recycled packaging plastics

Passive daytime radiative cooling, requiring zero external energy consumption, is a promising cooling strategy achieved by simultaneously reflecting solar irradiance and thermally radiating heat into the cold outer space (~3 K) through the atmospheric transparency window. However, current materials for passive radiative cooling face huge challenges, such as complicated fabrication approaches, expensive raw materials, and environmental requirements for practical applications. In line with the urgent need for plastic recycling to curb global environmental pollution, the recycled plastics are used to fabricate a passive radiative cooling material. Herein, the foam-paper composite (FPC) with excellent self-cooling capability is fabricated by a simple crushing-and-mixing procedure using recycled polystyrene (PS) foam and printer paper. The superhydrophobic PS foam particles not only protect the FPC from water damage for field applications but also reinforce its solar reflectivity via their porous structure. The cellulose fibers in printer paper can efficiently emit infrared thermal radiation into the cold outer space and bond dispersed PS foam particles together, further increasing its mechanical strength. The combination of highly diffusely reflective PS foam particles and fiber-based printer paper results in a reflectivity of 96% in the solar spectrum, a sub-ambient cooling performance of 8.4 degrees C, and a maximum radiative cooling power of 90 W/m2 during a 24-h cycle. Meanwhile, the FPC with high humidity can maintain its high solar reflectivity, which promotes its application in humid subtropical areas. Further, the low material cost and ease of fabrication will provide a path for effective daytime radiative cooling, especially in less developed areas.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Coherent Electromagnetic Emission from Relativistic Magnetized Shocks

Relativistic magnetized shocks are a natural source of coherent emission, offering a plausible radiative mechanism for fast radio bursts (FRBs). We present first-principles 3D simulations that provide essential information for the FRB models based on shocks: the emission efficiency, spectrum, and polarization. The simulated shock propagates in an e ± plasma with magnetization σ > 1 . The measured fraction of shock energy converted to coherent radiation is ≃ 10 -3 σ -1 , and the energy-carrying wave number of the wave spectrum is ≃ 4ω c /c, where ω c is the upstream gyrofrequency. The ratio of the O-mode and X-mode energy fluxes emitted by the shock is ≃ 0.4σ -1 . The dominance of the X mode at σ >> 1 is particularly strong, approaching 100% in the spectral band around 2ω c . We also provide a detailed description of the emission mechanism for both X and O modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The High-Frequency Signature of Slow and Fast Laboratory Earthquakes

Tectonic faults fail through a spectrum of slip modes, ranging from slow aseismic creep to rapid slip during earthquakes. Understanding the seismic radiation emitted during these slip modes is key for advancing earthquake science and earthquake hazard assessment. In this work, we use laboratory friction experiments instrumented with ultrasonic sensors to document the seismic radiation properties of slow and fast laboratory earthquakes. Stick-slip experiments were conducted at a constant loading rate of 8 μm/s and the normal stress was systematically increased from 7 to 15 MPa. We produced a full spectrum of slip modes by modulating the loading stiffness in tandem with the fault zone normal stress. Acoustic emission data were recorded continuously at 5 MHz. We demonstrate that the full continuum of slip modes radiate measurable high-frequency energy between 100 and 500 kHz, including the slowest events that have peak fault slip rates <100 μm/s. The peak amplitude of the high-frequency time-domain signals scales systematically with fault slip velocity. Stable sliding experiments further support the connection between fault slip rate and high-frequency radiation. Experiments demonstrate that the origin of the high-frequency energy is fundamentally linked to changes in fault slip rate, shear strain, and breaking of contact junctions within the fault gouge. Our results suggest that having measurements close to the fault zone may be key for documenting seismic radiation properties and fully understanding the connection between different slip modes.

58 GEOSCIENCES↗