Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RACE RELATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Turbomachinery rotor support with damping

Damping seals, damping bearings, and a support sleeve are presented for the ball bearings of a high speed rotor. The ball bearings consist of a duplex set having the outer races packaged tightly within the sleeve while the sleeve provides a gap with a support member so that the bearings may float with the sleeve. The sleeve has a web extending radially between the pair of outer races and acts in conjunction with one or more springs to apply an axial preload to the outer races. The sleeves have a series of slits which provide the sleeve with a spring-like quality so that the spring acts to center the rotor upon which the bearings are mounted during start up and shut down. A damping seal or a damping bearing may be used in conjunction with the ball bearings and supporting sleeve, the damping seal and damping bearing having rotor portions including rigid outer surfaces mounted within the bore of a stator portion having triangular shaped pockets on the surface facing the rotor. Axial gates are provided between adjacent pockets in sections of the stator permitting fluid to flow with less resistance axially relative to the flow of fluids circumferentially between the rotor and the stator.

Vonpragenau, George L.↗

Observations of Spacecraft Bearing Lubricant Redistribution Based on Thermal Conductance Measurements

The performance and life of precision ball bearings are critically dependent on maintaining a quantity of oil at the ball/race interface that is sufficient to support a robust protective film. In space applications, where parched conditions are intentionally the norm, harsh operating conditions can displace the small reserves of oil, resulting in reduced film thickness and premature wear. In the past, these effects have proven difficult to model or to measure experimentally. This paper describes a study addressing this challenge, where bearing thermal conductance measurements are employed to infer changes in lubricant quantity at the critical rolling interfaces. In the first part of the paper, we explain how the lubricant's presence and its quantity impacts bearing thermal conductance measurements. For a stationary bearing, we show that conductance is directly related to the lubricant quantity in the ball/race contacts. Hence, aspects of bearing performance related to oil quantity can be understood and insights improved with thermal conductance data. For a moving bearing, a different mechanism of heat transfer dominates and is dependent on lubricant film thickness on the ball. In the second part of the report, we discuss lubricant quantity observations based on bearing thermal conductance measurements. Lubricant quantity, and thus bearing thermal conductance, depends on various initial and operating conditions and is impacted further by the run-in process. A significant effect of maximum run-in speed was also observed, with less oil remaining after obtaining higher speeds. Finally, we show that some of the lubricant that is displaced between the ball and race during run-in operation can be recovered during rest, and we measure the rate of recovery for one example.

Takeuchi, Yoshimi R.↗

A Preliminary Study on Racial Differences in HMOX1, NFE2L2, and TGFβ1 Gene Polymorphisms and Radiation-Induced Late Normal Tissue Toxicity

Purpose: This study tested whether racial differences in genetic polymorphisms of 4 genes involved in wound repair and response to radiation can be used to predict the occurrence of normal tissue late effects of radiation therapy and indicate potential therapeutic targets. Methods and Materials: This prospective study examined genetic polymorphisms that modulate the expression of 4 genes involved in inflammation and fibrosis and response to radiation (HMOX1, NFE2L2, NOS3, and TGFβ1). DNA from blood samples of 179 patients (∼80% breast and head and neck) collected at the time of diagnosis by their radiation oncologist as exhibiting late normal tissue toxicity was used for the analysis. Patient demographics were as follows: 56% white, 43% African American, 1% other. Allelic frequencies of the different polymorphisms of the participants were compared with those of the general American population stratified by race. Twenty-six additional patients treated with radiation, but without toxicity at 3 months or later after therapy, were also analyzed. Results: Increased frequency of a long GT repeat in the HMOX1 promoter was associated with late effects in both African American and white populations. The single nucleotide polymorphisms (SNP) rs1800469 in the TGFβ1 promoter and the rs6721961 SNP in the NFE2L2 promoter were also found to significantly associate with late effects in African Americans but not whites. A combined analysis of these polymorphisms revealed that >90% of African American patients with late effects had at least 1 of these minor alleles, and 58% had 2 or more. No statistical significance was found relating the studied NOS3 polymorphisms and normal tissue toxicity. Conclusions: These results support a strong association between wound repair and late toxicities of radiation. The presence of these genetic risk factors can vary significantly among different ethnic groups, as demonstrated for some of the SNPs. Future studies should account for the possibility of such ethnic heterogeneity in the late toxicities of radiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

OH PLIF Visualization of an Optically Accessible Rotating Detonation Combustor

OH PLIF imaging has been successfully conducted within an optically accessible race- track shaped rotating detonation combustor. The OH PLIF images taken in this study corroborate the overall flow field structure reconstructed from previous OH* chemilumi- nescence studies conducted on the same combustor. However, the increased spatial and temporal resolution achieved with the OH PLIF technique allowed for the identification of previously unknown structures present in the detonation wave and its wake. These struc- tures appear as non-uniformities in the OH PLIF signal throughout the channel. Smaller scale structures range from variations in light intensity all the way to seemingly unburnt gas pockets passing through the detonation wave, suggesting non uniform reaction across the propagating detonation wave. Also present in the flow is a relatively large structure, consisting of a dark band surrounded by regions of higher OH intensity that trails the detonation wave. This band is hypothesized to be a result of the effect of secondary waves on the injection system and subsequent fill region composition stratification. Both of these flow structures represent potential avenues for performance loss through off-design mixing and heat release being uncoupled from the detonation wave.

Chacon, Fabian↗

[ ] or SUCCESS is Not Enough: Current Technology and Future Directions in Proof Presentation

Automated theorem provers for first order logic are now around for several decades. Over the last few years, their deductive power to solve hard problems has increased tremendously. The annual CASC system competitions [Se97] give a clear picture of this situation. However, today's automated theorem provers are restricted "more by general usability than by raw deductive power." As a result of this, there are only very few serious applications of automated theorem provers. There are numerous features which a theorem prover lacks for real-world applicability. An automated theorem prover (as it is currently seen) is nothing more than a fast and elaborate search procedure. In that sense, an ATP can compared to a formulated race car, cool and fast, but virtually unusable for shopping groceries around the corner. Many important features are missing, or are optimized for speed rather than for applicability. [Schol] identifies important features which are needed for practical usability like detection of non-theorems, handling of modal/inductive proof tasks, control of the prover, and proof output. In this paper, we will focus solely on the last point, the presentation of the ATP's result to the user. In the rest of this paper, we will first discuss the general importance of providing feedback to the user, then we will describe the system ExplainIt!, a part of the deductive synthesis system AMPHION/NAV. In the conclusions we will relate proof presentation to other ways of post-processing a proof found by an ATP and stress their role in the future of automated deduction.

Schumann, Johann↗

Processing of the glycosomal matrix-protein import receptor PEX5 of Trypanosoma brucei

Highlights: ► Most eukaryotic cells have a single gene for the peroxin PEX5. ► PEX5 is sensitive to in vitro proteolysis in distantly related organisms. ► TbPEX5 undergoes N-terminal truncation in vitro and possibly in vivo. ► Truncated TbPEX5 is still capable of binding PTS1-containing proteins. ► PEX5 truncation is physiologically relevant or an evolutionary conserved artifact. -- Abstract: Glycolysis in kinetoplastid protists such as Trypanosoma brucei is compartmentalized in peroxisome-like organelles called glycosomes. Glycosomal matrix-protein import involves a cytosolic receptor, PEX5, which recognizes the peroxisomal-targeting signal type 1 (PTS1) present at the C-terminus of the majority of matrix proteins. PEX5 appears generally susceptible to in vitro proteolytic processing. On western blots of T. brucei, two PEX5 forms are detected with apparent M{sub r} of 100 kDa and 72 kDa. 5′-RACE-PCR showed that TbPEX5 is encoded by a unique transcript that can be translated into a protein of maximally 72 kDa. However, recombinant PEX5 migrates aberrantly in SDS–PAGE with an apparent M{sub r} of 100 kDa, similarly as observed for the native peroxin. In vitro protease susceptibility analysis of native and {sup 35}S-labelled PEX5 showed truncation of the 100 kDa form at the N-terminal side by unknown parasite proteases, giving rise to the 72 kDa form which remains functional for PTS1 binding. The relevance of these observations is discussed.

60 APPLIED LIFE SCIENCES↗

Registration of the sorghum carbon–partitioning nested association mapping (CP–NAM) population

The sorghum [ Sorghum bicolor (L.) Moench] carbon-partitioning nested association mapping (CP_NAM) (Reg. no. MP-4, NSL 542189 MAP) population was developed at Clemson University, SC, using 11 diverse, male founder accessions, each crossed with a recurrent female parent ‘Grassl’. The male parents represent all five major botanical races and the four major agronomic types: cellulosic (5), sweet (3), grain (2) and forage (1). A set of 11 recombinant inbred line (RIL) families CP_NAM01 to CP_NAM011 were maintained, which consisted of 2,484 (F 6 ) individuals. Each RIL family contained a minimum of 193 individuals (CP_NAM01) and a maximum of 287 individuals (CP_NAM06). For the development of this population, the founder lines were judiciously selected from the sorghum Bioenergy Association Panel based on carbon-partitioning phenotypes that make this population an ideal genetic resource for dissecting a wide range of agronomic and compositional traits for basic and applied research. The founder accessions of the CP_NAM were phenotypically characterized for various traits, including agronomic, biomass and related components, and additional compositional components. Each of the 11 F 6 RIL families of the CP_NAM were genotyped using genotyping-by-sequencing analysis, and 144,087 single nucleotide polymorphisms were generated for each individual. Genotypic information along with phenotypic data were used for the characterization of this population and to explore the range of phenotypes that permits the understanding of carbon-partitioning dynamics. This population is a unique resource for researchers to study a wide range of contrasting carbon-partitioning characteristics in sorghum to understand the genetic architecture underlying whole-plant carbon partitioning and allocation.

59 BASIC BIOLOGICAL SCIENCES↗

One Giant Leap to Protect All Mankind: An Overview of the Lunar Receiving Laboratory

Motivation. In 1961, President John F. Kennedy charged the nation "to land a man on the moon and return him safely to Earth." Eight years later, the Apollo 11 astronauts splashed down in the Pacific Ocean after this first 8-day journey to the moon. As humans had never ventured to another extraterrestrial body, the U.S. government noted the great uncertainty associated with the unknown exposures related to this historic mission. Overview. With this uncertainty in mind, a newly formed Interagency Committee on Back Contamination (ICBC) was established to review the potential for lunar contaminants and establish the prevention of their escape into the biosphere during crew and sample recovery operations from the floating command module to the mobile quarantine facility on the recovery ship and return to the Johnson Space Center. Significance. As a result of the ICBC recommendations, in 1966 NASA planned and built the Lunar Receiving Laboratory (LRL) at the Johnson Space Center in Houston, Texas. The LRL served a great role in service of human space exploration to quarantine Apollo crewmembers, their space vehicles, and the lunar samples collected. Almost an afterthought in the space race to the Moon, the 83,000-square-foot LRL was designed and completed in 1967 for $7.8 million. The core purpose of the LRL was "to protect the public's health, agriculture, and other living resources; to provide lunar sample distribution to approved scientific investigators; and to preserve the scientific integrity of the lunar samples at all times." Its layout was comprised of three major zones: a quarantined Crew Area, a separate but also quarantined Sample Operations Area, and a Support and Administration Area outside the controlled biological barrier. This facility required trained personnel to live and perform within it for several weeks post-flight, to include astronaut crewmembers, flight surgeons, scientists, and vehicle recovery engineers. The LRL holds memories of these historic events but has since been repurposed for NASA's medical and environmental sciences activities, in what is now known as Building 37. As we approach its 50th anniversary, the LRL story will end in demolition as NASA advances its facilities for the next steps in human exploration of space. Learning Objectives: 1. To capture the historical relevance of the NASA Lunar Receiving Laboratory 2. To understand the requirements of receiving crew and samples from the moon for the first time 3. To describe the facility capabilities in protection of public health.

Hayes, Judith↗

A Short Glossary of Inclusive Language

Words matter—that old adage that many of us may have heard as children, Sticks and stones may break my bones, but words will never hurt me, is a harmful fallacy. In reality, the language we use has tremendous power to alienate, exclude, deride, humiliate, and wound. On the other hand, thoughtful use of language can signal openness, inclusivity, admiration, and celebration, or simply be an expression of empathy and care for our fellow humans. As part of The Oceanography Society (TOS) Justice, Equity, Diversity, and Inclusion Committee’s series of columns in Oceanography, here we provide a glossary of terms that are often used while discussing topics such as race, ethnicity, gender, sexual orientation, and gender identity. It should be explicitly stated that this list is neither definitive nor exhaustive. Indeed, the terms included here are likely heavily influenced by the authors’ own lived experiences and the lenses through which we see the world. Language is a living entity, a fluid social construct subject to rapid changes and overlaid with regional nuances. Indeed, what may be accurate and acceptable terminology for one person may be entirely unacceptable for another. Keeping this in mind, the following glossary is an attempt to group together some of the acronyms and phrases that are most commonly used today in social justice studies and bodies of work and that may have particular relevance to our community of ocean-related scientists, technologists, and stakeholders. We have borrowed heavily from a wide range of excellent existing scholarship and activism and have cited all sources used. We encourage the reader to follow the links to these multimedia resources and, perhaps, use them as teaching and discussion materials with your students, colleagues, and mentees. Finally, it is our hope that this glossary, along with the links provided to more comprehensive definitions and discussions, helps to define terms that you may have heard used, but not understood, and that it will serve to remind us of the power of the words we use in our everyday professional and personal lives. We begin by defining the very words that form the name of our committee: Justice, Equity, Diversity, and Inclusion (JEDI)

Susanne E. Craig↗

Feasibility study of microwave electron heating on the C-2 field-reversed configuration device

Different microwave heating scenarios for the C-2 plasmas have been investigated recently with use of both the Genray ray-racing code and the IPF-FDMC full-wave code, and the study was focused on the excitation of the electron Bernstein wave (EBW) with O-mode launch. For a given antenna position on C-2 and the fixed 2D plasma density and equilibrium field profiles, simulations have been done for six selected frequencies (2.45 GHz, 5 GHz, 8 GHz, 18 GHz, 28 GHz, and 50 GHz). Launch angles have been optimized for each case in order to achieve high coupling efficiencies to the EBW by the O-X-B mode conversion process and high power deposition. Results show that among those six frequencies, the case of 8 GHz is the most promising scenario, which has both high mode conversion efficiency (90%) and the relatively deeper power deposition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quirky Circling Behavior in Mice Informs Research on Humans in Space

As interest in long duration effects of space habitation increases, understanding the behavior of model organisms living within the habitats engineered to fly them is vital for designing, validating, and interpreting future spaceflight studies. We previously conducted a detailed phenotypic analysis of mouse behavior during long duration (33-day) spaceflight in the NASA Rodent Habitat (Rodent Research-1; RR1 mission). Notably, we documented the emergence within the 8-10 days of launch of spontaneous ambulatory behavior in the form of circling or ‘race-tracking’ behavior in spaceflight but not in an identical ground control condition. Circling is unique to the NASA RH not having been reported to occur in other mouse habitats that provide limited opportunity for grasping, and/or are characterized by smaller habitable volumes viz., Italian Mice Drawer System (MDS) flown on ISS; Russian Block Obespecheniya Soderzhaniya (BOS) flown on Bion M-1, or JAXA Habitat Cage Unit (HCU) flown in the ISS Kibo module. Over time, circling became the primary dark cycle activity of FLT mice, occurring in individuals then as a coordinated group activity. Here we discuss possible interpretations of circling behavior including: (1) Stereotypic or abnormal repetitive behaviors (ARBs) that are unvarying, and apparently functionless behavior patterns documented numerous species in laboratory and zoo settings, possibility related to insufficient environmental enrichment and stress, (2) Rewarding effects of physical activity that are well-documented in terrestrial studies of rodents given the opportunity to run in wheels, and (3) Vestibular self-stimulation, i.e., the generation biologically-relevant amounts of vestibular sensory input to reduce the effects of microgravity. Affording mice the opportunity to grab and run in the RH resembles physical activities that the crew participate in routinely. Our approach is yielding an interesting analogue for better understanding human responses to spaceflight, and providing the opportunity to begin to address how physical movement influences responses to microgravity.

spaceflight↗

Local adaptation of both plant and pathogen: an arms‐race compromise in switchgrass rust

In coevolving species, parasites locally adapt to host populations as hosts locally adapt to resist parasites. Parasites often outpace host local adaptation since they have rapid life cycles, but host diversity, the strength of selection, and external environmental influence can result in complex outcomes. To better understand local adaptation in host–parasite systems, we examined locally adapted switchgrass (Panicum virgatum), and its leaf rust pathogen (Puccinia novopanici) across a latitudinal range in North America. We grew switchgrass genotypes in 10 replicated multiyear common gardens, measuring rust severity from natural infection in a ‘host reciprocal transplant’ framework for testing local adaptation. We conducted genome-wide association mapping to identify genetic loci associated with rust severity. Genetically differentiated rust populations were locally adapted to northern and southern switchgrass, despite host local adaptation to environmental conditions in the same regions. Rust resistance was polygenic, and distinct loci were associated with rust severity in the north and south. We narrowed a previously identified large-effect quantitative trait locus for rust severity to a candidate YELLOW STRIPE-LIKE gene and linked numerous other loci to defense-related genes. Overall, our results suggest that both hosts and parasites can be simultaneously locally adapted, especially when parasites impose less selection than other environmental factors.

59 BASIC BIOLOGICAL SCIENCES↗

Glioblastoma in Children: A Single-Institution Experience

Purpose: Current treatment recommendations for pediatric glioblastoma include surgery, chemotherapy, and radiation therapy. However, even with this multispecialty approach, overall survival remains poor. To assess outcome and evaluate treatment-related prognostic factors, we retrospectively reviewed the experience at our institution. Methods and Materials: Twenty-four glioblastoma patients under the age of 21 were treated with radiation therapy with curative intent at Washington University, St. Louis, from 1970 to 2008. Patients underwent gross total resection, subtotal resection or biopsy alone. Fourteen (58%) of the patients received chemotherapy. All patients received radiation therapy. Radiation consisted of whole-brain radiation therapy in 7 (29%) patients with a median dose of 50.4 Gy. Seventeen (71%) patients received three-dimensional conformal radiation therapy with a median dose of 54 Gy. Results: Median follow-up was 12.5 months from diagnosis. One and 2-year overall survival rates were 57% and 32%, respectively. Median overall survival was 13.5 months. There were no differences in overall survival based on patients' age, race, gender, tumor location, radiation volume, radiation dose, or the use of chemotherapy. There was a significant improvement in overall survival for patients in whom gross total resection was achieved (p = 0.023). Three patients were alive 5 years after gross total resection, and 2 patients were alive at 10 and 24 years after diagnosis. Conclusions: Survival for children with glioblastoma remains poor. Data from this and other studies demonstrate the importance of achieving a gross total resection. Continued investigation into new treatment options is needed in an attempt to improve outcome for these patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Propulsion Physics Under the Changing Density Field Model

To grow as a space faring race, future spaceflight systems will requires new propulsion physics. Specifically a propulsion physics model that does not require mass ejection without limiting the high thrust necessary to accelerate within or beyond our solar system and return within a normal work period or lifetime. In 2004 Khoury and Weltman produced a density dependent cosmology theory they called Chameleon Cosmology, as at its nature, it is hidden within known physics. This theory represents a scalar field within and about an object, even in the vacuum. Whereby, these scalar fields can be viewed as vacuum energy fields with definable densities that permeate all matter; having implications to dark matter/energy with universe acceleration properties; implying a new force mechanism for propulsion physics. Using Chameleon Cosmology, the author has developed a new propulsion physics model, called the Changing Density Field (CDF) Model. This model relates to density changes in these density fields, where the density field density changes are related to the acceleration of matter within an object. These density changes in turn change how an object couples to the surrounding density fields. Whereby, thrust is achieved by causing a differential in the coupling to these density fields about an object. Since the model indicates that the density of the density field in an object can be changed by internal mass acceleration, even without exhausting mass, the CDF model implies a new propellant-less propulsion physics model

Robertson, Glen A.↗

Cervical Precancers and Cancers Attributed to HPV Types by Race and Ethnicity: Implications for Vaccination, Screening, and Management

Abstract Background Racial and ethnic variations in attribution of cervical precancer and cancer to human papillomavirus (HPV) types may result in different HPV vaccine protection, screening test coverage, and clinical management. Methods Pooling data from 7 US studies, we calculated the proportional attribution of precancers and cancers to HPV types using HPV DNA typing from diagnosis. All statistical tests were 2-sided. Results For all racial and ethnic groups, most cases of cervical intraepithelial neoplasia grade 3 (CIN3) (84.2%-90.8% of 5526) and squamous cell carcinoma (SCC) (90.4%-93.8% of 1138) were attributed to types targeted by the 9-valent vaccine. A higher proportion of CIN3s were attributed to nonvaccine HPV types among non-Hispanic Black women (15.8%) compared with non-Hispanic Asian or Pacific Islander (9.7%; P = .002), non-Hispanic White (9.2%; P < .001), and Hispanic (11.3%; P = .004) women. The proportion of SCCs attributed to 9-valent types was similar by race and ethnicity (P = .80). A higher proportion of CIN3s were attributed to nonvaccine HPV35 among non-Hispanic Black (9.0%) compared with non-Hispanic Asian or Pacific Islander (2.2%), non-Hispanic White (2.5%), and Hispanic (3.0%; all P < .001) women. Compared with CIN3, the proportion of SCCs attributed to HPV35 among non-Hispanic Black women (3.2%) was lower and closer to other groups (0.3%-2.1%; P = .70). Conclusion The 9-valent HPV vaccine will prevent nearly all cervical precancers and invasive cancers among major racial and ethnic groups in the United States. Adding HPV35 to vaccines could prevent a small percentage of CIN3s and SCCs, with greater potential impact for CIN3s among Black women. HPV screening tests target high-risk HPV types, including HPV35. Future genotyping triage strategies could consider the importance of HPV35- and other HPV16-related types.

Mix, Jacqueline (ORCID:0000000164187706)↗

Real-Time Modeling of Thermal Interactions in Cryogenic Ball Bearings

Based on the integration of classical differential equations of motion of bearing elements, a real-time dynamic simulation of ball bearing performance is coupled with simultaneous modeling of thermal interactions between the bearing elements. The transient heat generations are time averaged over a significantly larger time step before they are used to compute the changes in bearing temperature fields. Such an averaging algorithm eliminates the numerical difficulties associated with simultaneous integration of mechanical thermal differential equations with vastly different time scales. Under stable operation, the step change in temperatures at each thermal time step converges to a steady-state solution. Following is a list of accomplishments in the present investigation: (1) A real-time dynamic performance of both 440C and hybrid ball bearings in a LOX environment is modeled in both transient and steady-state time domains, as the inner race accelerates to a prescribed operating speed. (2) The frictional interactions at the ball to race contacts are modeled by experimentally measured traction coefficients as a function of slide-to-roll ratios. (3) Bearing heat generation, as defined by the heat transferred to circulating LOX, is validated against experimental values determined by measured LOX temperatures under prescribed pressures and flow rates. The predicted heat generation is in good agreement with the experimental values. (4) The steady-state solutions are shown to be independent of initial conditions. This establishes convergence of the numerical integration of a differential equation of motion of the bearing elements. (5) Churning and drag losses in the circulating LOX constitutes the majority of bearing heat generation under the experimental test conditions. (6) The heat dissipated in frictional interactions in hybrid bearings is significantly lower in hybrid bearings in comparison to that simulated in all-steel bearings, while the churning and drag losses are relatively unchanged.

Gupta, P. K.↗

Tribometer for Lubrication Studies in Vacuum

The NASA Lewis Research Center has developed a new way to evaluate the liquid lubricants used in ball bearings in space mechanisms. For this evaluation, a liquid lubricant is exercised in the rolling contact vacuum tribometer shown in the photo. This tribometer, which is essentially a thrust bearing with three balls and flat races, has contact stresses similar to those in a typical preloaded, angular contact ball bearing. The rotating top plate drives the balls in an outward-winding spiral orbit instead of a circular path. Upon contact with the "guide plate," the balls are forced back to their initial smaller orbit radius; they then repeat this spiral orbit thousands of times. The orbit rate of the balls is low enough, 2 to 5 rpm, to allow the system to operate in the boundary lubrication regime that is most stressful to the liquid lubricant. This system can determine the friction coefficient, lubricant lifetime, and species evolved from the liquid lubricant by tribodegradation. The lifetime of the lubricant charge is only few micrograms, which is "used up" by degradation during rolling. The friction increases when the lubricant is exhausted. The species evolved by the degrading lubricant are determined by a quadrupole residual gas analyzer that directly views the rotating elements. The flat races (plates) and 0.5-in.-diameter balls are of a configuration and size that permit easy post-test examination by optical and electron microscopy and the full suite of modern surface and thin-film chemical analytical techniques, including infrared and Raman microspectroscopy and x-ray photoelectron spectroscopy. In addition, the simple sphere-on-a-flat-plate geometry allows an easy analysis of the contact stresses at all parts of the ball orbit and an understanding of the frictional energy losses to the lubricant. The analysis showed that when the ball contacts the guide plate, gross sliding occurs between the ball and rotating upper plate as the ball forced back to a smaller orbit radius. The friction force due to gross sliding is sensed by the piezoelectric force transducer behind the guide plate and furnishes the coefficient of friction for the system. This tribometer has been used to determine the relative lifetimes of Fomblin Z-25, a lubricant often used in space mechanisms, as a function of the material of the plates against which it was run. The balls were 440C steel in all cases; the plate materials were aluminum, chromium (Cr), 440C steel (17 wt % Cr), and 4150 steel (1 wt % Cr). As shown in the bar graph, the lifetime is greatest for the plate material with least chromium, thus implicating chromium as a tribochemically active element attacking Fomblin Z-25.

Pepper, Stephen V.↗

Simulating quantum materials with digital quantum computers

Quantum materials exhibit a wide array of exotic phenomena and practically useful properties. A better understanding of these materials can provide deeper insights into fundamental physics in the quantum realm as well as advance technology for entertainment, healthcare, and sustainability. The emergence of digital quantum computers (DQCs), which can efficiently perform quantum simulations that are otherwise intractable on classical computers, provides a promising path forward for testing and analyzing the remarkable, and often counter-intuitive, behavior of quantum materials. Equipped with these new tools, scientists from diverse domains are racing towards achieving physical quantum advantage (i.e., using a quantum computer to learn new physics with a computation that cannot feasibly be run on any classical computer). The aim of this review, therefore, is to provide a summary of progress made towards this goal that is accessible to scientists across the physical sciences. We will first review the available technology and algorithms, and detail the myriad ways to represent materials on quantum computers. Next, we will showcase the simulations that have been successfully performed on currently available DQCs, emphasizing the variety of properties, both static and dynamic, that can be studied with this nascent technology. Finally, we work through two examples of how to map a materials problem onto a DQC, with full code included in the Supplementary Material. It is our hope that this review can serve as an organized overview of progress in the field for domain experts and an accessible introduction to scientists in related fields interested in beginning to perform their own simulations of quantum materials on DQCs.

97 MATHEMATICS AND COMPUTING↗