Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum Fluids and Solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Generalized charge-screening in relativistic Thomas–Fermi model

In this paper, we study the charge shielding within the relativistic Thomas-Fermi model for a wide range of electron number-densities and the atomic-number of screened ions. A generalized energy-density relation is obtained using the force-balance equation and taking into account the Chandrasekhar's relativistic electron degeneracy pressure. By numerically solving a second-order nonlinear differential equation, the Thomas-Fermi screening length is investigated, and the results are compared for three distinct regimes of the solid-density, warm-dense-matter, and white-dwarfs (WDs). It is revealed that our nonlinear screening theory is compatible with the exponentially decaying Thomas-Fermi-type shielding predicted by the linear response theory. Moreover, the variation of relative Thomas-Fermi screening length shows that extremely dense quantum electron fluids are relatively poor charge shielders. Calculation of the total number of screening electrons around a nucleus shows that there is a position of maximum number of screening localized electrons around the screened nucleus, which moves closer to the point-like nucleus by increase in the plasma number density but is unaffected due to increase in the atomic-number value. It is discovered that the total number of screening electrons, (N{sub s}∝r{sub TF}{sup 3}/r{sub d}{sup 3} where r{sub TF} and r{sub d} are the Thomas-Fermi and interparticle distance, respectively) has a distinct limit for extremely dense plasmas such as WD-cores and neutron star crusts, which is unique for all given values of the atomic-number. This is equal to saying that in an ultrarelativistic degeneracy limit of electron-ion plasma, the screening length couples with the system dimensionality and the plasma becomes spherically self-similar. Current analysis can provide useful information on the effects of relativistic correction to the charge screening for a wide range of plasma density, such as the inertial-confined plasmas and compact stellar objects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetosonic Waves in a Two-Dimensional Electron Fermi Liquid

The properties of highly viscous fluids at high frequencies become similar to those of amorphous solids. In particular, the propagation of not only longitudinal acoustic waves (plasmons in the case of an electron fluid), but also transverse acoustic waves associated with shear deformations becomes possible. In this work, the formation of transverse acoustic waves at high frequencies in a two-dimensional electron fluid in a magnetic field is studied. Consideration is performed within Landau’s Fermi-liquid model. It is shown that the dynamics of Fermi-liquid excitations is described by hydrodynamic equations at a rather strong quasiparticle interaction. The Navier–Stokes equation and expressions for high-frequency shear viscosity coefficients are derived. Based on the equations obtained, dispersion laws are calculated for transverse and longitudinal magnetosonic waves. It is shown that the cyclotron frequency entering the viscosity coefficients and the dispersion relation of transverse magnetosonic waves is renormalized and typically becomes lower than the ordinary cyclotron frequency determining cyclotron resonance. The latter fact was apparently observed in the photoresistance of high-mobility GaAs quantum wells in which two-dimensional electrons form a viscous fluid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shock-driven fluid-structure interaction for civil design

The multiphysics fluid-structure interaction simulation of shock-loaded structures requires the dynamic coupling of a shock-capturing flow solver to a solid mechanics solver for large deformations. The Virtual Test Facility combines a Cartesian embedded boundary approach with dynamic mesh adaptation in a generic software framework of flow solvers using hydrodynamic finite volume upwind schemes that are coupled to various explicit finite element solid dynamics solvers (Deiterding et al., 2006). This paper gives a brief overview of the computational approach and presents first simulations that utilize the general purpose solid dynamics code DYNA3D for complex 3D structures of interest in civil engineering. Results from simulations of a reinforced column, highway bridge, multistory building, and nuclear reactor building are presented.

42 ENGINEERING↗

Three-Dimensional Complex-Shaped Photopolymerized Microparticles at Liquid Crystal Interfaces

Microparticles of arbitrary shapes immersed in the bulk of nematic fluids are known to produce dipolar or quadrupolar elastic distortions that can mediate long-range colloidal interactions. We use two-photon photopolymerization to obtain complex-shaped surface-bound microparticles that are then embedded into a nematic liquid crystal host with a uniform far-field director. By means of three-dimensional imaging with multi-photon excitation fluorescence polarizing microscopy, we demonstrate low-symmetry, long-range elastic distortions induced by the particles in the liquid crystal director field. These director distortions may provide a means for controlling elastic interactions in liquid crystals between custom-designed photopolymerized microparticles attached to confining solid substrates and nematic fluid-borne colloids, thus enabling elasticity-mediated templated self-assembly.

36 MATERIALS SCIENCE↗

Application of parallel distributed Lagrange multiplier technique to simulate coupled Fluid-Granular flows in pipes with varying Cross-Sectional area

Fluid-granular flows are common phenomena in nature and industry. Here, an efficient computational technique based on the distributed Lagrange multiplier method is utilized to simulate complex fluid-granular flows. Each particle is explicitly resolved on an Eulerian grid as a separate domain, using solid volume fractions. The fluid equations are solved through the entire computational domain, however, Lagrange multiplier constrains are applied inside the particle domain such that the fluid within any volume associated with a solid particle moves as an incompressible rigid body. The particle–particle interactions are implemented using explicit force-displacement interactions for frictional inelastic particles similar to the DEM method with some modifications using the volume of an overlapping region as an input to the contact forces. Here, a parallel implementation of the method is based on the SAMRAI (Structured Adaptive Mesh Refinement Application Infrastructure) library.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light confinement by a cylindrical metallic waveguide in a dense buffer-gas environment

We report on the implementation of metallic microtubes in a system of rubidium vapor at 230 bar of argon buffer gas. The high-buffer gas pressure leads to a widely pressure broadened linewidth of several nanometers, interpolating between the sharp atomic physics spectra and the band structure of solid state systems. Tube-like metallic waveguide structures have been inserted in the high-pressure buffer gas system, allowing for guiding light in an optical dense gas over a length in the tube of up to 1 mm. The system holds promise for nonlinear optics experiments and the study of atom-light polariton condensation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Phases of Transition Metal Dichalcogenide Moiré Systems

Moiré systems provide a rich platform for studies of strong correlation physics. Recent experiments on heterobilayer transition metal dichalcogenide Moiré systems are exciting in that they manifest a relatively simple model system of an extended Hubbard model on a triangular lattice. Inspired by the prospect of the hetero-transition metal dichalcogenide Moiré system’s potential as a solid-state-based quantum simulator, we explore the extended Hubbard model on the triangular lattice using the density matrix renormalization group. Specifically, we explore the two-dimensional phase space spanned by the key tuning parameters in the extended Hubbard model, namely, the kinetic energy strength and the further-range Coulomb interaction strengths. We find competition between Fermi fluid, chiral spin liquid, spin density wave, and charge order. In particular, our finding of the optimal further-range interaction for the chiral correlation presents a tantalizing possibility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-fidelity modeling to predict the rheological properties of a suspension of fibers using neural networks and Gaussian processes

Unveiling the rheological properties of fiber suspensions is of paramount interest to many industrial applications. There are multiple factors, such as fiber aspect ratio and volume fraction, that play a significant role in altering the rheological behavior of suspensions. Three-dimensional (3D) numerical simulations of coupled differential equations of the suspension of fibers are computationally expensive and time-consuming. Machine learning algorithms can be trained on the available data and make predictions for the cases where no numerical data are available. However, some widely used machine learning surrogates, such as neural networks, require a relatively large training dataset to produce accurate predictions. Multi-fidelity models, which combine high-fidelity data from numerical simulations and less expensive lower fidelity data from resources such as simplified constitutive equations, can pave the way for more accurate predictions. Here, we focus on neural networks and the Gaussian processes with two levels of fidelity, i.e., high and low fidelity networks, to predict the steady-state rheological properties, and compare them to the single-fidelity network. High-fidelity data are obtained from direct numerical simulations based on an immersed boundary method to couple the fluid and solid motion. The low-fidelity data are produced by using constitutive equations. Multiple neural networks and the Gaussian process structures are used for the hyperparameter tuning purpose. Results indicate that with the best choice of hyperparameters, both the multi-fidelity Gaussian processes and neural networks are capable of making predictions with a high level of accuracy with neural networks demonstrating marginally better performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amplification of laser radiation in disk Yb:YAG crystals cooled down to the liquid nitrogen temperature

The parameters of a diode-pumped Yb:YAG amplifier are calculated. The derived expressions allow one to determine the optimal doping of the YAG crystal with Yb ions, which is {approx}10% for a 600-{mu}m-thick crystal. The calculations take into account the absorption line profile and the characteristics of the pump spectrum (the shape, width, central wavelength). When the 10% Yb-doped YAG crystal is cooled down from 296 K to 80 K, the shift of the gain profile centre ({approx}0.3 nm) and the increase in the stimulated emission cross section (by four times) as well as the depletion of the lower working level are observed. The small-signal gain (the maximum value is 1.7, which corresponds to the gain 4.4 cm{sup -1}) is measured as a function of the absorbed pump power and well agrees with the results of theoretical calculations. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single frequency stable VCSEL as a compact source for interferometry and vibrometry

Developing an innovative PS-DAVLL (Polarization Switching DAVLL) method of frequency stabilization, which used a ferroelectric liquid crystal cell as quarter wave plate, rubidium cell and developed ultra-stable current source, allowed to obtain a frequency stability of 10{sup -9}(frequency reproducibility of 1,2centre dot10{sup -8}) and reductions in external dimensions of laser source. The total power consumption is only 1,5 Watt. Because stabilization method used in the frequency standard is insensitive to vibration, the semiconductor laser interferometer was built for measuring range over one meter, which can also be used in industry for the accurate measurement of displacements with an accuracy of 1[mum/m]. Measurements of the VCSEL laser parameters are important from the standpoint of its use in laser interferometry or vibrometry, like narrow emission line DELTAnu{sub FWHM} = 70[MHz] equivalent of this laser type and stability of linear polarization of VCSEL laser. The undoubted advantage of the constructed laser source is the lack of mode-hopping effect during continuous work of VCSEL.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solid-liquid phase coexistence of alkali nitrates from molecular dynamics simulations.

Alkali nitrate eutectic mixtures are finding application as industrial heat transfer fluids in concentrated solar power generation systems. An important property for such applications is the melting point, or phase coexistence temperature. We have computed melting points for lithium, sodium and potassium nitrate from molecular dynamics simulations using a recently developed method, which uses thermodynamic integration to compute the free energy difference between the solid and liquid phases. The computed melting point for NaNO3 was within 15K of its experimental value, while for LiNO3 and KNO3, the computed melting points were within 100K of the experimental values [4]. We are currently extending the approach to calculate melting temperatures for binary mixtures of lithium and sodium nitrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fourth-order harmonic generation during parametric four-wave mixing in the filaments in ambient air

We propose a simplified scheme for efficient 200-nm pulse generation in isotropic medium using 800-nm radiation. The observation and optimization of the fourth-order harmonic generation during two-color filamentation in air are reported. This parametric process is based on four-wave mixing of the fundamental and the second-order harmonic radiation of the Ti:sapphire laser. A systematic study of the influence of the laser intensity, the polarization, the chirp, and the pulse duration on the fourth-order harmonic output from the filaments has been carried out. The fourth-order harmonic conversion efficiency was estimated to be of the order of 10{sup -4}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Raman scattering mediated by neighboring molecules

Raman scattering is most commonly associated with a change in vibrational state within individual molecules, the corresponding frequency shift in the scattered light affording a key way of identifying material structures. In theories where both matter and light are treated quantum mechanically, the fundamental scattering process is represented as the concurrent annihilation of a photon from one radiation mode and creation of another in a different mode. Developing this quantum electrodynamical formulation, the focus of the present work is on the spectroscopic consequences of electrodynamic coupling between neighboring molecules or other kinds of optical center. To encompass these nanoscale interactions, through which the molecular states evolve under the dual influence of the input light and local fields, this work identifies and determines two major mechanisms for each of which different selection rules apply. The constituent optical centers are considered to be chemically different and held in a fixed orientation with respect to each other, either as two components of a larger molecule or a molecular assembly that can undergo free rotation in a fluid medium or as parts of a larger, solid material. The two centers are considered to be separated beyond wavefunction overlap but close enough together to fall within an optical near-field limit, which leads to high inverse power dependences on their local separation. In this investigation, individual centers undergo a Stokes transition, whilst each neighbor of a different species remains in its original electronic and vibrational state. Analogous principles are applicable for the anti-Stokes case. The analysis concludes by considering the experimental consequences of applying this spectroscopic interpretation to fluid media; explicitly, the selection rules and the impact of pressure on the radiant intensity of this process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revisiting low-fidelity two-fluid models for gas–solids transport

Two-phase gas–solids transport models are widely utilized for process design and automation in a broad range of industrial applications. Some of these applications include proppant transport in gaseous fracking fluids, air/gas drilling hydraulics, coal-gasification reactors and food processing units. Systems automation and real time process optimization stand to benefit a great deal from availability of efficient and accurate theoretical models for operations data processing. However, modeling two-phase pneumatic transport systems accurately requires a comprehensive understanding of gas–solids flow behavior. In this study we discuss the prevailing flow conditions and present a low-fidelity two-fluid model equation for particulate transport. The model equations are formulated in a manner that ensures the physical flux term remains conservative despite the inclusion of solids normal stress through the empirical formula for modulus of elasticity. A new set of Roe–Pike averages are presented for the resulting strictly hyperbolic flux term in the system of equations, which was used to develop a Roe-type approximate Riemann solver. The resulting scheme is stable regardless of the choice of flux-limiter. The model is evaluated by the prediction of experimental results from both pneumatic riser and air-drilling hydraulics systems. We demonstrate the effect and impact of numerical formulation and choice of numerical scheme on model predictions. We illustrate the capability of a low-fidelity one-dimensional two-fluid model in predicting relevant flow parameters in two-phase particulate systems accurately even under flow regimes involving counter-current flow.

42 ENGINEERING↗

Derivation of a continuum model and the energy law for moving contact lines with insoluble surfactants

A continuous model is derived for the dynamics of two immiscible fluids with moving contact lines and insoluble surfactants based on thermodynamic principles. The continuum model consists of the Navier-Stokes equations for the dynamics of the two fluids and a convection-diffusion equation for the evolution of the surfactant on the fluid interface. The interface condition, the boundary condition for the slip velocity, and the condition for the dynamic contact angle are derived from the consideration of energy dissipations. Different types of energy dissipations, including the viscous dissipation, the dissipations on the solid wall and at the contact line, as well as the dissipation due to the diffusion of surfactant, are identified from the analysis. A finite element method is developed for the continuum model. Numerical experiments are performed to demonstrate the influence of surfactant on the contact line dynamics. The different types of energy dissipations are compared numerically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Infrared spectra of molecules and materials of astrophysical interest

The Raman spectra of gaseous, liquid and solid, and infrared spectra of gaseous and solid isopropylamine-d sub 0 and -d sub 2 was investigated between 4000 and 50 cm superscript -1. Differences between the spectrum of the solid phase and that of the fluid phases were interpreted in terms of an equilibrium between low energy s-trans and high energy gauche conformers, and a complete vibrational assignment was proposed for the s-trans conformer. The far infrared spectra of the gaseous compounds contained bands due to the asymmetric amino and coupled methyl torsions; the assignment of these bands was aided by observation of a number of two quantum transitions for each vibrational mode. The asymmetric potential functions were calculated, which resulted in values for the enthalpy differences between conformers in the gaseous phase of 446 and 523 callmole for the sub 0 -d and -d sub 2 compounds, respectively. The methyl torsional potential function of isopropylamine-d sub 0 was calculated which led to a value for the barrier height to internal rotation of the methyl rotors of 4.23 + or - 0.06 kcal/mole. Values for the ideal gas thermodynamic functions were calculated over a range of temperatures.

Durig, J. R.↗

Numerical models analysis of energy conversion process in air-breathing laser propulsion

Energy source was considered as a key essential in this paper to describe energy conversion process in air-breathing laser propulsion. Some secondary factors were ignored when three independent modules, ray transmission module, energy source term module and fluid dynamic module, were established by simultaneous laser radiation transportation equation and fluid mechanics equation. The incidence laser beam was simulated based on ray tracing method. The calculated results were in good agreement with those of theoretical analysis and experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗