Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Proton detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Proton Quenching in Rare-Earth Inorganic Scintillators: GAGG:Ce and YSO:Ce

Scintillator detectors are an integral component of radiation detection systems for a variety of applications such as medical imaging, accelerator diagnostics, and space science. Typically, a scintillator detector’s response is characterized using gamma sources to understand the detection response to different types of radiation, including charged particle detection. However, there exists a nonlinearity of the amount of light produced from an incident gamma ray of specific energy and the light produced from an incident charged particle of the same energy. This important effect, known as quenching, must be accounted for to interpret energies from charged particles incident on detectors. In this article, we present results of quenching parameterization for two types of cerium-doped inorganic scintillators, Y2SiO5:Ce (YSO:Ce) and Gd3Al2Ga3O12:Ce (GAGG:Ce). We measured the light output from incident proton energies from 1 to 25 MeV using a 3-MV tandem accelerator and two reactions: Au(p,p)Au and 3He(d,p)⁴He. Using gamma-ray sources to calibrate the detectors, we compared the measured electron-equivalent energy versus the incident energy expected. Using an adaptation of the Birks semi-empirical formula, we extracted the Birks parameter (kB) to understand quenching. For one of the GAGG:Ce samples, the kB parameter of 0.0072 [g cm-2 MeV-1] is comparable to a similar study where the value of kB was 0.0065 [g cm-2 MeV-1]. For YSO:Ce, no other kB values were found in the literature. Three different types of GAGG:Ce were used to collect measurements of kB as a function of dopant concentration.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Platform for Automated Anomaly Detection in the Mercury Process System at the Target System in the Spallation Neutron Source

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory accelerates proton beams, which are directed toward a mercury target to generate the world’s most intense neutron beams via spallation. The target system consists of several interconnected subsystems and accounts for a major share of the facility’s overall downtime. Early detection of anomalies in the target system response can thus provide the possibility of taking corrective actions to reduce downtime. Accelerator facilities have largely focused on the beam side for data-driven fault prognostics. On the target side, SNS relies on operational shift technicians (OSTs), who respond to alarms and manually flag anomalies onto the System Tracking and Reliability (STAR) platform. This paper presents one of the first studies of using machine learning (ML) to automate anomaly detection in the target system. The study focused on the mercury process system as the first use case and employed reconstruction-based anomaly detection on minutely sampled time series signals. The pipeline was integrated into the STAR platform to autonomously rank and flag anomalies every week. The STAR platform provides a user interface for the OSTs to evaluate the flagged anomalies, thereby incorporating human feedback.

Anomaly detection↗
DOE OSTI2024

A Platform for Ultra-Fast Proton Probing of Matter in Extreme Conditions

Recent developments in ultrashort and intense laser systems have enabled the generation of short and brilliant proton sources, which are valuable for studying plasmas under extreme conditions in high-energy-density physics. However, developing sensors for the energy selection, focusing, transport, and detection of these sources remains challenging. This work presents a novel and simple design for an isochronous magnetic selector capable of angular and energy selection of proton sources, significantly reducing temporal spread compared to the current state of the art. The isochronous selector separates the beam based on ion energy, making it a potential component in new energy spectrum sensors for ions. Analytical estimations and Monte Carlo simulations validate the proposed configuration. Due to its low temporal spread, this selector is also useful for studying extreme states of matter, such as proton stopping power in warm dense matter, where short plasma stagnation time (<100 ps) is a critical factor. The proposed selector can also be employed at higher proton energies, achieving final time spreads of a few picoseconds. This has important implications for sensing technologies in the study of coherent energy deposition in biology and medical physics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Potential for neutron and proton transmutation doping of GaN and Ga 2 O 3

As the potential applications of GaN and Ga 2 O 3 are limited by the inadequacy of conventional doping techniques, specifically when uniform selective area p-type doping is required, the potential for transmutation doping of these materials is analyzed. All transmuted element concentrations are reported as a function of time for several common proton and neutron radiation sources, showing that previously published results considered a small subset of the dopants produced. A 40 MeV proton accelerator is identified as the most effective transmutation doping source considered, with a 2.25 × 10 17 protons per cm 2 fluence yielding net concentrations of uncompensated p-type dopants of 7.7 × 10 15 and 8.1 × 1015 cm -3 for GaN and Ga 2 O 3 , respectively. Furthermore, it is shown that high energy proton accelerator spectra are capable of producing dopants required for magnetic and neutron detection applications, although not of the concentrations required for current applications using available irradiation methods.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Searches for Sub-GeV Dark Matter with NOvA and LDMX and Performance Studies of the Cosmic-Ray Veto for Mu2e

The constituents of dark matter are still unknown, and the viable possibilities span a very large mass range. Specific scenarios for the origin of dark matter sharpen the focus to within about an MeV to 100 TeV. Most of the stable constituents of known matter have masses in the lower range, and a thermal origin for dark matter works in a simple and predictive manner in this mass range as well. Non-gravitational couplings of dark matter to Standard Model particles would make it possible to produce dark matter at accelerators. Through 120 GeV proton-nucleus collisions, NOvA is effectively a beam dump experiment for producing and detecting dark matter. This thesis presents a search for dark matter – electron scattering in the NOvA near detector from sub-GeV dark matter produced at the target. A future search for sub-GeV dark matter with the Light Dark Matter eXperiment (LDMX) is discussed, along with a study of LDMX's expected sensitivity to visibly decaying dark photons. Additionally, performance studies of the Mu2e cosmic ray veto (CRV) are presented. A calibration procedure for the CRV counters is discussed, along with tests of the efficiency, position resolution, and light yield decline of the CRV counters.

Horoho, Tyler Gregory [Virginia U.] (ORCID:0000000↗
DOE OSTI2025

Using Neural Networks for Low Energy Reconstruction and Neutron Identification in the MicroBooNE LArTPC

Identifying and reconstructing final-state neutrons from neutrino interactions in Liquid Argon Time Projection Chambers (LArTPCs) will enhance future oscillation measurements by recovering missing energy and improving neutrino interaction channel identification. However, neutrons are challenging to reconstruct as the majority leave only small, isolated charge signatures known as blips. Here we present initial efforts to identify neutrons in the MicroBooNE LArTPC with low energy protons from neutron-argon inelastic interactions that present as blips below the traditional tracking threshold in the TPC. Unlike for tracks, there is no algorithmic method to determine direction for blips since they span only a few wires. Therefore, we developed and trained a Recurrent Neural Network (RNN) to reconstruct the directionality of proton-induced blips, allowing us to separate signal from background by selecting blips that point back to the neutrino vertex. The model achieves a preliminary average angular resolution of 17 degrees when tested on a simulated sample of protons over 6 MeV in kinetic energy. This novel tool will enhance neutron detection in LArTPCs and expand a broad range of other low-energy physics searches such as for solar and supernova neutrinos.

Silva, Liani Isabel [Unlisted, US]↗
DOE OSTI2021

Design and Performance of a Smartphone-based Cosmic Ray Observatory

This dissertation examines the feasibility of appropriating the global network of smartphones as an observatory for ultra-high-energy cosmic rays. An application and cloud-based data-acquisition system are first proposed for such an observatory, in which heterogenous devices self-calibrate and server feedback optimizes individual device triggers. Methods of monitoring and manually controlling this network are also examined. Detection efficiencies for cosmic muons, MeV-scale gamma rays, and 120 GeV protons are then measured for this trigger, with which a Monte Carlo pixel model is fine-tuned. Extending this model to cosmic ray showers, the effective area of the observatory for super-GZK primaries is shown to equal that of the Pierre Auger Observatory with a global participation rate under 0.1%, far below initial estimates presented in Ref. [83]. A vastly improved sensitivity to photons and more precise modeling of electrons are primarily responsible for this discrepancy, though more refined models of the combinatorial background may yet lead to more stringent requirements.

Swaney, Jeff↗
DOE OSTI2026

Machine-learning techniques for model-independent searches in dijet final states

Anomaly detection methods used in a recent search for new phenomena by CMS at the CERN LHC are presented. The methods use machine learning to detect anomalous jets produced in the decay of new massive particles without depending on a specific theory model. The effectiveness of these approaches in enhancing sensitivity to various simulated signal samples is studied and compared using data collected in proton–proton collisions at a center-of-mass energy of 13 TeV. In an example analysis, the capabilities of anomaly detection methods are further demonstrated by identifying large-radius jets consistent with Lorentz-boosted hadronically decaying top quarks in a model-agnostic framework.

CMS↗
DOE OSTI2020

CO as a substrate and inhibitor of H + reduction for the Mo-, V-, and Fe-nitrogenase isozymes

Three known nitrogenase isozymes, Mo-, V-, and Fe-, catalyze biological reduction of dinitrogen (N 2 ) to ammonia (NH 3 ). All three utilize the same reductive elimination mechanism: an intermediate with two metal-bound hydrides reductively-eliminates hydrogen gas (H 2 ) in a reaction coupled to binding and activation of N 2 . Nonetheless, the three isozymes show dramatically different relative rates of H 2 formation and N 2 reduction, revealing important differences in reactivity with substrates. Carbon monoxide (CO) has been characterized as both an inhibitor and substrate for Mo- and V-nitrogenases, but not for the Fe-nitrogenase. In this work, we present a comparative study of the reactivity of the three isozymes with CO, examining CO both as a substrate and as an inhibitor of proton (H + ) reduction under steady-state conditions. For Mo-nitrogenase, there is neither detectable reduction of CO nor inhibition of H + reduction. Fe- and V-nitrogenase show CO reduction and inhibition of H + reduction that depends on the CO partial pressure. For V-nitrogenase, ethylene (C 2 H 4 ) is the major reduction product with a maximum specific activity of ~7.5 nmol C 2 H 4 /nmol VFe protein/min at 1 atm CO. The major product of CO reduction for Fe-nitrogenase is methane (CH 4 ) with a maximum specific activity of ~4.8 nmol CH 4 /nmol FeFe protein/min at 0.05 atm CO. The rate of CH 4 production by Fe-nitrogenase progressively increases to a maximum at 0.05 atm CO and then declines to ~10% with increasing CO partial pressure up to 1 atm. CO does not inhibit proton reduction in Mo-nitrogenase but shows 16% inhibition for V-nitrogenase and 35% for Fe-nitrogenase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Measurement of the background in the CMS muon detector in ${p}{p}$-collisions at $\sqrt{s} = 13$ TeV

The CMS detector, including its muon system, has been operating at the CERN LHC in increasingly challenging conditions for about 15 years. The muon detector was designed to provide excellent triggering and track reconstruction for muons produced in proton–proton collisons at an instantaneous luminosity ($\mathcal{L}$) of 1 x 10 34 cm –2 s –1 . During the Run 2 data-taking period (2015–2018), the LHC achieved an instantaneous luminosity of twice its design value, resulting in larger background rates and making the efficient detection of muons more difficult. While some backgrounds result from natural radioactivity, cosmic rays, and interactions of the circulating protons with residual gas in the beam pipe, the dominant source of background hits in the muon system arises from proton–proton interactions themselves. Charged hadrons leaving the calorimeters produce energy deposits in the muon chambers. In addition, high-energy particles interacting in the hadron calorimeter and forward shielding elements generate thermal neutrons, which leak out of the calorimeter and shielding structures, filling the CMS cavern. We describe the method used to measure the background rates in the various muon subsystems. These rates, in conjunction with simulations, can be used to estimate the expected backgrounds in the High-Luminosity LHC. This machine will run for at least 10 years starting in 2029 reaching an instantaneous luminosity of $\mathcal{L}$ = 5 x 10 34 cm –2 s –1 and increasing ultimately to $\mathcal{L}$ = 7.5 x 10 34 cm –2 s –1 . These background estimates have been a key ingredient for the planning and design of the muon detector upgrade.

Tytgat, M. (ORCID:0000000239902074)↗
DOE OSTI2022

The Coupling of an EUV Coronal Wave and Ion Acceleration in a Fermi-LAT Behind-the-Limb Solar Flare

We present the Fermi-LAT observations of the behind-the-limb (BTL) flare of 2021 July 17 and the joint detection of this flare by STIX on board the Solar Orbiter. The separation between Earth and the Solar Orbiter was $99^{\circ}_{\centerdot}2$ at 05:00 UT, allowing STIX to have a front view of the flare. The location of the flare was S20E140 in Stonyhurst heliographic coordinates, making this the most distant behind-the-limb flare ever detected in >100 MeV gamma-rays. The LAT detection lasted for ~16 minutes, the peak flux was 3.6 ± 0.8 (10 –5 ) ph cm –2 s –1 with a significance >15σ. A coronal wave was observed from both STEREO-A and SDO in extreme ultraviolet (EUV), with an onset on the visible disk in coincidence with the LAT onset. A complex type II radio burst was observed by GLOSS also in coincidence with the onset of the LAT emission, indicating the presence of a shock wave. We discuss the relation between the time derivative of the EUV wave intensity profile at 193 Å as observed by STEREO-A and the LAT flux to show that the appearance of the coronal wave at the visible disk and the acceleration of protons as traced by the observed >100 MeV gamma-ray emission are coupled. We also report how this coupling is present in the data from three other BTL flares detected by Fermi-LAT, suggesting that the protons driving the gamma-ray emission of BTL solar flares and the coronal wave share a common origin.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Deep Learning for Intelligent Bubble Size Detection in the Spallation Neutron Source Visual Target

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) will undergo proton power upgrade (PPU), increasing the proton beam power from 1.4 MW to 2.8 MW. From 2.8 MW, 2.0 MW will go to the current First Target Station and the rest will go to the future Second Target Station (STS). The First Target Station uses a liquid mercury target that is contained in a 316L stainless steel vessel. The proton beam is pulsed at 60 Hz, with a pulse of about 0.7μs. When the proton beam hits the target, the intense energy deposition leads to a rapid rise in temperature in the mercury. This temperature rise creates pressure waves that propagate through the mercury and cause cavitation erosion. The power upgrade will cause stronger pressure waves that will further increase damage because of cavitation. Injecting small helium bubbles in the mercury has been an efficient method of mitigating the pressure wave at 1.4 MW. However, at higher power, additional mitigation is necessary. Therefore, the 2 MW target vessel will be equipped with swirl bubblers and an additional gas injection port near the nose to inject more gas in the target. To develop a gas injection strategy and design, flow visualization in water with a transparent prototypical target (“visual target”) was performed. Bubble sizes and their spatial distribution in the flow loop are crucial to understanding the effectiveness of the bubbles in mitigating pressure waves. Bubbles were generated in the visual target under varied conditions of input pressures with helium and air. Images were captured using a high-speed camera at varied frame rates at different positions away from the swirl bubbler and different depths in the flow loop under varying lighting conditions. Initially, methods such as circular Hough transforms were applied after a series of images processing to obtain a general distribution of bubble sizes. Bubbles smaller than 500 μm are preferred to effectively mitigate the effect of pressure waves, which demands an accurate bubble detection and sizing system. Intelligent detection and identification of bubble sizes alleviate misdetection and improves accuracies. Employing neural networks, intelligent detection of bubble sizes and their distribution was developed and provides a robust alternative to traditional techniques. Human intervention was employed to label in-focus and out-of-focus bubbles in the set of training images. An object detection network using a pretrained convolutional neural network was created that extracted the features from the training images. Data augmentation was used to improve network accuracy through a random transformation of the original data.

Rasheed, Fayaz↗
DOE OSTI2021

PET imaging of zinc transport

A method for producing a solution including a positron emitting zinc cation of 63Zn, and the method comprises bombarding a solution target including 63 Cu with high energy protons to produce a solution including a positron emitting zinc cation. A method for detecting or ruling out Alzheimer's disease in a patient comprises administering to a patient a detectable amount of a compound including a positron emitting zinc cation, wherein the zinc cation is targeted to β-amyloid in the patient, and acquiring an image to detect the presence or absence of β-amyloid in the patient. A method for detecting or ruling out cancer in a patient comprises administering to a patient a detectable amount of a compound including a positron emitting zinc cation, wherein the zinc cation is targeted to tissue in the patient; and acquiring an image using a medical imaging technique to detect zinc distribution in tissue in the patient.

DeGrado, Timothy R.↗
DOE OSTI2020

Angular scattering of protons through ultrathin graphene foils: Application for time-of-flight instrumentation

Space plasma instruments often rely on ultrathin carbon foils for incident ion detection, time-of-flight (TOF) mass spectrometry, and ionization of energetic neutral atoms. Angular scattering and energy loss of ions or neutral atoms in the foil can degrade instrument performance, including sensitivity and mass resolution; thus, there is an ongoing effort to manufacture thinner foils. Using new 3-layer graphene foils manufactured at the Los Alamos National Laboratory, we demonstrate that these are the thinnest foils reported to date and discuss future testing required for application in space instrumentation. We characterize the angular scattering distribution for 3–30 keV protons through the foils, which is used as a proxy for the foil thickness. We show that these foils are ~2.5–4.5 times thinner than the state-of-the-art carbon foils and ~1.6 times thinner than other graphene foils described in the literature. We find that the inverse relationship between angular scattering and energy no longer holds, reaffirming that this may indicate a new domain of beam–foil interactions for ultrathin (few-layer) graphene foils.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

DUNE Photon Detection System

The Deep Underground Neutrino Experiment (DUNE) aims to provide a broad physics program primarily addressed to probing CP violation in the neutrino sector and identifying the neutrino mass hierarchy. The search for proton decay, the observation of supernova neutrino bursts, and the investigation of solar neutrinos represent other additional goals of DUNE experiment, which can be enhanced by the use and the high performances of the Photon Detection System (PDS). Using the technology based on liquid argon Time Projection Chamber (LArTPC), the experiment plans to observe neutrino interactions inside detectors located 1300 km away from the Long Baseline Neutrino Facility (LBNF) at Fermi National Accelerator Laboratory (FNAL), where the neutrinos are produced. The experiment consists of two main parts, respectively the far and near detectors. The far site will comprise four detector modules. The first module is constituted by a vertical drift single-phase LArTPC, while the second module provides a horizontal drift single-phase LArTPC. The configurations of the other modules are still under definition. Neutrino detection in LArTPCs is achieved by identifying the charge and light generated from its interactions with liquid argon. The wire planes of the instrumented anode and the PDS detect these signals, respectively. The PDS in the first two modules, detailed in the present document, uses a modified version of the so-called ARAPUCA technology, named X-ARAPUCA. This system consisting of a highly reflecting box with an entrance window made by dichroic filters and wavelength shifters, creates a trap to detect the VUV (128 nm) scintillation photons. The X-ARAPUCA of the first module is called Supercell, and it has dimensions of 488×100 mm 2 , while Megacell is the second module version, with an active area of 60×60 cm 2 . This latter configuration also represents a significant technological advancement. Since half of the modules are placed on the cathode at high voltage, they are powered and read out using innovative power-over-fiber (PoF) and signal-over-fiber (SoF) technologies. Meanwhile, the other half are installed in a membrane behind the field cage, with a total transparency of around 70%.

Neutrino detectors↗
DOE OSTI2024

Studies of e+e- Pair Photo-Production on Proton Target at 8 GeV in the GlueX Experiment

Lepton pair production has played an important role in both nuclear and particle physics, being among the earliest calculations utilizing QED, and seen most famously in the discovery of the J= at BNL. A technique is presented for measuring the linear polarization of GeV scale photon beams through the detection of e+e? pairs photo-produced in the target. This technique is applied to the analysis of GlueX data on proton target. Simulation predicts the analyzing power for pair production to be :5725 ? 0:0025 for the GlueX data, and the analysis of experimental data gives a linear polarization of approximately 35%, in good agreement with other measurements of beam polarization. The pair production technique is complementary to other electromagnetic and hadronic measurements of beam polarization, and is generally applicable in experiments that allow for forward angle electron and positron identi?fication and tracking. To facilitate this study, a neural net was trained for e=? separation to eliminate the pion background. Further, it is demonstrated that these e+e? pairs are sensitive to the proton charge form factor, which opens up the possibility for a new method to measure the proton RMS charge radius.

Schick, Andrew↗
DOE OSTI2022

Light Dark Matter Detection with Hydrogen-Rich Targets and Low-$T_c$ TES Detectors

Direct detection of nuclear scatterings of sub-GeV dark matter (DM) particles favors low-Z nuclei. Hydrogen nucleus, which has a single proton, provides the best kinematic match. The characteristic nuclear recoil energy is boosted by a factor of a few tens from those for larger nuclei used in traditional Weakly Interacting Massive Particles searches. Furthermore, hydrogen is optimal for detecting spin-dependent nuclear scatterings of sub-GeV DM, where large parameter space still remains unconstrained yet. In this paper, we first introduce several hydrogen-rich targets, which emit two classes of signals under kinetic excitations. One class of the signals is infrared photons, which are from fundamental vibrational and rotational modes of molecules and at several characteristic wavelengths. Another is acoustic phonons and optical phonons that decay into acoustic phonons. Then we discuss the technical status and future researches of low-T c transition-edge sensor (TES) detectors, which measure the infrared photons and acoustic phonons with desirable sensitivities. Utilization of hydrogen-rich targets and ultra-sensitive low-T c TES detectors for light DM detection requires both theoretical modeling and experimental prototyping.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Fast collective neutrino oscillations inside the neutrino sphere in core-collapse supernovae

Neutrinos are believed to have a key role in the explosion mechanism of core-collapse supernovae as they carry most of the energy released by the gravitational collapse of a massive star. If their flavor is converted fast inside the neutrino sphere, the supernova explosion may be influenced. This paper is reporting the results of the extended work of our previous paper. Here, we perform a thorough survey of the electron lepton number (ELN) crossing in one of our self-consistent, realistic Boltzmann simulations in two spatial dimensions under axisymmetry for the existence of the crossings between $ν_e$ and $\bar{ν}_e$ angular distributions, or the ELN crossing. We report for the first time the positive detections deep inside the core of the massive star in the vicinity of neutrino sphere at $\textit{r}$ ≈ 16 – 21 km . We find that low values of the electron fraction $Y_e$ produced by convective motions together with the appearance of light elements are critically important to give rise to the ELN crossing by enhancing the chemical potential difference between proton and neutron, and hence by mitigating the Fermi-degeneracy of $ν_e$. Since the region of positive detection are sustained and, in fact, expanding with time, it may have an impact on the explosion of core-collapse supernovae, observational neutrino astronomy, and nucleosynthesis of heavy nuclei.

79 ASTRONOMY AND ASTROPHYSICS↗