Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power System Identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Modeling of human operator dynamics in simple manual control utilizing time series analysis

Time series analysis is applied to model human operator dynamics in pursuit and compensatory tracking modes. The normalized residual criterion is used as a one-step analytical tool to encompass the processes of identification, estimation, and diagnostic checking. A parameter constraining technique is introduced to develop more reliable models of human operator dynamics. The human operator is adequately modeled by a second order dynamic system both in pursuit and compensatory tracking modes. In comparing the data sampling rates, 100 msec between samples is adequate and is shown to provide better results than 200 msec sampling. The residual power spectrum and eigenvalue analysis show that the human operator is not a generator of periodic characteristics.

Agarwal, G. C.↗
NASA NTRS1985

System technology analysis of aeroassisted orbital transfer vehicles. Moderate lift/drag (0.75-1.5): Volume 1A, part 2: Executive summary, phase 2

Significant achievements and activities of Phase 2 of a study to assess aeroassisted orbit transfer vehicle (AOTV) system technology are summarized. Phase 2 was directed towards identification and prioritization of technology payoffs of representative space based mid lift/drag ratio (L/D) AOTV's and the cryofueled propulsion subsystem - configuration interactions. Enhancing technology areas were identified which could provide substantial transport cost reduction. These include: (1) improved lifetime of storable propellant engines; (2) avionics weight reduction; (3) external thermal protection system weight reduction; (4) decrease of uncertainties in aerodynamic and aerothermodynamic performance; electrical power subsystem weight reduction due to incorporation of advanced materials; and (6) structural shell weight reduction. Results indicated that advanced aerothermodynamic methodology and aft end configuring may provide an enlarged allowable zone for engine nozzle protrusions into the separated flow region. Payload manifesting and non-hydrogen propellant manifesting at the space station is recommended.

Source record↗
NASA NTRS1982

Clocks for airborne systems

The potential performance of compact oscillators, needed for the development of accurate clocks for future airborne systems (such as Identification Friend or Foe schemes), is addressed. In particular, extensive testing of rubidium oscillators manufactured by Efratom is discussed. The results indicate that an accuracy of better than 10 microseconds should be achievable in tactical aircraft provided that appropriate measures are adopted to counter the many environmental factors. In a favorable environment a stability of better than 5 x 10 to the -13th power for one day is achievable with present commercial units, but improvements are required to suit operation in an aircraft. With further development of rubidium controlled clocks the ultimate limitation on time accuracy in aircraft will probably be associated with time dissemination, maintenance difficulties and doctrinal hurdles.

Houlding, N.↗
NASA NTRS1995

Wide speed range turboshaft study

NASA-Lewis and NASA-Ames have sponsored a series of studies over the last few years to identify key high speed rotorcraft propulsion and airframe technologies. NASA concluded from these studies that for near term aircraft with cruise speeds up to 450 kt, tilting rotor rotorcraft concepts are the most economical and technologically viable. The propulsion issues critical to tilting rotor rotorcraft are: (1) high speed cruise propulsion system efficiency and (2) adequate power to hover safely with one engine inoperative. High speed cruise propeller efficiency can be dramatically improved by reducing rotor speed, yet high rotor speed is critical for good hover performance. With a conventional turboshaft, this wide range of power turbine operating speeds would result in poor engine performance at one or more of these critical operating conditions. This study identifies several wide speed range turboshaft concepts, and analyzes their potential to improve performance at the diverse cruise and hover operating conditions. Many unique concepts were examined, and the selected concepts are simple, low cost, relatively low risk, and entirely contained within the power turbine. These power turbine concepts contain unique, incidence tolerant airfoil designs that allow the engine to cruise efficiently at 51 percent of the hover rotor speed. Overall propulsion system efficiency in cruise is improved as much as 14 percent, with similar improvements in engine weight and cost. The study is composed of a propulsion requirement survey, a concept screening study, a preliminary definition and evaluation of selected concepts, and identification of key technologies and development needs. In addition, a civil transport tilting rotor rotorcraft mission analysis was performed to show the benefit of these concepts versus a conventional turboshaft. Other potential applications for this technology are discussed.

Dangelo, Martin↗
NASA NTRS2001

Integrated Neural Flight and Propulsion Control System

This paper describes an integrated neural flight and propulsion control system. which uses a neural network based approach for applying alternate sources of control power in the presence of damage or failures. Under normal operating conditions, the system utilizes conventional flight control surfaces. Neural networks are used to provide consistent handling qualities across flight conditions and for different aircraft configurations. Under damage or failure conditions, the system may utilize unconventional flight control surface allocations, along with integrated propulsion control, when additional control power is necessary for achieving desired flight control performance. In this case, neural networks are used to adapt to changes in aircraft dynamics and control allocation schemes. Of significant importance here is the fact that this system can operate without emergency or backup flight control mode operations. An additional advantage is that this system can utilize, but does not require, fault detection and isolation information or explicit parameter identification. Piloted simulation studies were performed on a commercial transport aircraft simulator. Subjects included both NASA test pilots and commercial airline crews. Results demonstrate the potential for improving handing qualities and significantly increasing survivability rates under various simulated failure conditions.

Kaneshige, John↗
NASA NTRS1980

IUE low-dispersion spectra of four luminous stars in symmetric nebulae

The stars and nebulae are HD 56925 in NGC 2359, + 60 deg 2522 in NGC 7635, AG Car in its nebula, and 209 BAC in M1-67. A discussion of known properties of these systems precedes the IUE data, which are tabulated with types and identifications of significant line features and velocities of ultraviolet-displaced absorption features. Weaver et al.'s theory of the interaction of a stellar wind with the ambient interstellar medium is applied to the combined observational data. This gives a table of self-consistent values for stellar terminal wind velocity, rate of mass loss, and wind power; nebular mass, radius, expansion velocity, and age; also ambient interstellar density and mass swept up from the interstellar medium by the wind. The relatively infrequent occurrence of such symmetric nebulae around young, massive stars is possibly related to the short lifetimes of the nebulae in comparison with stellar evolution lifetimes.

Johnson, H. M.↗
NASA NTRS1982

Planning assistance for the NASA 30/20 GHz program. Network control architecture study.

Network Control Architecture for a 30/20 GHz flight experiment system operating in the Time Division Multiple Access (TDMA) was studied. Architecture development, identification of processing functions, and performance requirements for the Master Control Station (MCS), diversity trunking stations, and Customer Premises Service (CPS) stations are covered. Preliminary hardware and software processing requirements as well as budgetary cost estimates for the network control system are given. For the trunking system control, areas covered include on board SS-TDMA switch organization, frame structure, acquisition and synchronization, channel assignment, fade detection and adaptive power control, on board oscillator control, and terrestrial network timing. For the CPS control, they include on board processing and adaptive forward error correction control.

Inukai, T.↗
NASA NTRS1986

Environmental Control Life Support for the Space Station

The preliminary design of the nation's Space Station is presently being developed. The Environmental Control and Life Support System (ECLSS), consisting of regenerative and nonregenerative technologies, has progressed through a series of trade studies including evaluation of the closure and distribution within the evolutionary Space Station configuration. The analysis has included the identification of the time-critical functions, redundancy (backup) management, definition of common subsystem interfaces and quantification of technology options for the process equipment. Each technology has been characterized by its physical characteristics of weight, power, volume, heat rejection, etc. Summaries of the trade study findings for the overall ECLSS in terms of physical characteristics and the impact of selected technologies is presented.

Miller, Craig W.↗
NASA NTRS1997

On spurious behavior of CFD simulations

Spurious behavior in underresolved grids and/or semi-implicit temporal discretizations for four computational fluid dynamics (CFD) simulations are studied. The numerical simulations consist of (a) a 1-D chemically relaxed nonequilibrium model, (b) the direct numerical simulation (DNS) of 2-D incompressible flow over a backward facing step, (c) a loosely-coupled approach for a 2-D fluid-structure interaction, and (d) a 3-D compressible unsteady flow simulation of vortex breakdown in delta wings. Using knowledge from dynamical systems theory, various types of spurious behaviors that are numerical artifacts were systematically identified. These studies revealed the various possible dangers of misinterpreting numerical simulation of realistic complex flows that are constrained by the available computing power. In large scale computations underresolved grids, semi-implicit procedures, loosely-coupled implicit procedures, and insufficiently long time integration in DNS are most often unavoidable. Consequently, care must be taken in both computation and in interpretation of the numerical data. The results presented confirm the important role that dynamical systems theory can play in the understanding of the nonlinear behavior of numerical algorithms and in aiding the identification of the sources of numerical uncertainties in CFD.

Numerical Solution↗
NASA NTRSDate not supplied

EXCAP-LR: Exploration Capabilities Logistics Reduction

All human space missions require substantial logistical mass and volume. As our exploration missions increase in distance and duration, reduction of these logistics requirements becomes more important. The movement and tracking of logistics between vehicle elements are increasingly recognized as critical to crew efficiency and on-orbit mission assurance. This project targets the best opportunities to demonstrate logistics reduction, repurposing, and efficient tracking and management of logistics. These technologies and innovations will make future exploration missions more affordable. - REALM-3 (RFID (Radio Frequency Identification) Enabled Autonomous Logistics Management) – Hydra (HYper-Distributed RFID Antenna) Smart Stow: receives RFID signal from readers, use very small % of signal to self-power on-board microcontroller and RF switch, multiplex RFID signal to other nodes in a chain or to a multitude of antennas. ISS HYDRA Smart Stow is over-instrumented to allow evaluation of a branched network HYDRA chain. - UWMS (Universal Waste Management System) – provides a compact, lower mass/volume toilet for exploration missions - ACS (Advanced Clothing Systems) – investigates ways to reduce clothing mass and volume directly or through efficiently cleaning them for reuse.

Patrick Fink↗
NASA NTRS1998

Empirical Mode Decomposition and Hilbert Spectral Analysis

The difficult facing data analysis is the lack of method to handle nonlinear and nonstationary time series. Traditional Fourier-based analyses simply could not be applied here. A new method for analyzing nonlinear and nonstationary data has been developed. The key part is the Empirical Mode Decomposition (EMD) method with which any complicated data set can be decomposed into a finite and often small number of Intrinsic Mode Functions (IMF) that serve as the basis of the representation of the data. This decomposition method is adaptive, and, therefore, highly efficient. The IMFs admit well-behaved Hilbert transforms, and yield instantaneous energy and frequency as functions of time that give sharp identifications of imbedded structures. The final presentation of the results is an energy-frequency-time distribution, designated as the Hilbert Spectrum. Among the main conceptual innovations is the introduction of the instantaneous frequencies for complicated data sets, which eliminate the need of spurious harmonics to represent nonlinear and nonstationary signals. Examples from the numerical results of the classical nonlinear equation systems and data representing natural phenomena are given to demonstrate the power of this new method. The classical nonlinear system data are especially interesting, for they serve to illustrate the roles played by the nonlinear and nonstationary effects in the energy-frequency-time distribution.

Huang, Norden E.↗
NASA NTRS2016

Design and Performance of the NASA SCEPTOR Distributed Electric Propulsion Flight Demonstrator

Distributed Electric Propulsion (DEP) technology uses multiple propulsors driven by electric motors distributed about the airframe to yield beneficial aerodynamic-propulsion interaction. The NASA SCEPTOR flight demonstration project will retrofit an existing internal combustion engine-powered light aircraft with two types of DEP: small "high-lift" propellers distributed along the leading edge of the wing which accelerate the flow over the wing at low speeds, and larger cruise propellers co-located with each wingtip for primary propulsive power. The updated high-lift system enables a 2.5x reduction in wing area as compared to the original aircraft, reducing drag at cruise and shifting the velocity for maximum lift-to-drag ratio to a higher speed, while maintaining low-speed performance. The wingtip-mounted cruise propellers interact with the wingtip vortex, enabling a further efficiency increase that can reduce propulsive power by 10%. A tradespace exploration approach is developed that enables rapid identification of salient trades, and subsequent creation of SCEPTOR demonstrator geometries. These candidates were scrutinized by subject matter experts to identify design preferences that were not modeled during configuration exploration. This exploration and design approach is used to create an aircraft that consumes an estimated 4.8x less energy at the selected cruise point when compared to the original aircraft.

Borer, Nicholas K.↗
NASA NTRS1978

Satellite Power System (SPS). State and local regulations as applied to satellite power system microwave receiving antenna facilities

State and local regulation of power plant construction and operation of solar power satellite (SPS) receiving stations is presented. Each receiving antenna station occupies a land area 100-200 km square, receives microwave transmissions from the solar power satellite, and converts them into electricity for transmission to the power grid. The long lead time associated with the SPS and the changing status of state and local regulation dictated emphasis on: generic classification of the types of regulation, and identification of regulatory vectors which affect rectenna facilities.

Kotin, A. D.↗
NASA NTRS1997

Dynamics of Numerics & Spurious Behaviors in CFD Computations

The global nonlinear behavior of finite discretizations for constant time steps and fixed or adaptive grid spacings is studied using tools from dynamical systems theory. Detailed analysis of commonly used temporal and spatial discretizations for simple model problems is presented. The role of dynamics in the understanding of long time behavior of numerical integration and the nonlinear stability, convergence, and reliability of using time-marching approaches for obtaining steady-state numerical solutions in computational fluid dynamics (CFD) is explored. The study is complemented with examples of spurious behavior observed in steady and unsteady CFD computations. The CFD examples were chosen to illustrate non-apparent spurious behavior that was difficult to detect without extensive grid and temporal refinement studies and some knowledge from dynamical systems theory. Studies revealed the various possible dangers of misinterpreting numerical simulation of realistic complex flows that are constrained by available computing power. In large scale computations where the physics of the problem under study is not well understood and numerical simulations are the only viable means of solution, extreme care must be taken in both computation and interpretation of the numerical data. The goal of this paper is to explore the important role that dynamical systems theory can play in the understanding of the global nonlinear behavior of numerical algorithms and to aid the identification of the sources of numerical uncertainties in CFD.

Yee, Helen C.↗
NASA NTRS1992

WELDSMART: A vision-based expert system for quality control

This work was aimed at exploring means for utilizing computer technology in quality inspection and evaluation. Inspection of metallic welds was selected as the main application for this development and primary emphasis was placed on visual inspection, as opposed to other inspection methods, such as radiographic techniques. Emphasis was placed on methodologies with the potential for use in real-time quality control systems. Because quality evaluation is somewhat subjective, despite various efforts to classify discontinuities and standardize inspection methods, the task of using a computer for both inspection and evaluation was not trivial. The work started out with a review of the various inspection techniques that are used for quality control in welding. Among other observations from this review was the finding that most weld defects result in abnormalities that may be seen by visual inspection. This supports the approach of emphasizing visual inspection for this work. Quality control consists of two phases: (1) identification of weld discontinuities (some of which may be severe enough to be classified as defects), and (2) assessment or evaluation of the weld based on the observed discontinuities. Usually the latter phase results in a pass/fail judgement for the inspected piece. It is the conclusion of this work that the first of the above tasks, identification of discontinuities, is the most challenging one. It calls for sophisticated image processing and image analysis techniques, and frequently ad hoc methods have to be developed to identify specific features in the weld image. The difficulty of this task is generally not due to limited computing power. In most cases it was found that a modest personal computer or workstation could carry out most computations in a reasonably short time period. Rather, the algorithms and methods necessary for identifying weld discontinuities were in some cases limited. The fact that specific techniques were finally developed and successfully demosntrated to work illustrates that the general approach taken here appears to be promising for commercial development of computerized quality inspection systems. Inspection based on these techniques may be used to supplement or substitute more elaborate inspection methods, such as x-ray inspections.

Andersen, Kristinn↗
NASA NTRS1991

An optical catalog of extragalactic emission-line objects similar to quasi-stellar objects

A catalog of 935 galaxies which have optical properties similar to those of QSOs is given. A subsidiary table of cross-identifications enables the reader to relate the name of a given object to its coordinate name. Most of the objects appear to be nonstellar. The majority, more than 700, have redshifts z = 0.2 or less, and have mostly been classified as Seyfert galaxies, N systems, or radio galaxies. The Hubble diagram for all of the objects with z = 0.2 or less is shown. The redshift distribution peaks at z = 0.025, but there are about 200 powerful radio galaxies in the extended tail of the distribution which have z greater than 0.2. There is a separate and distinct peak in the redshift distribution at z = 0.06.

Hewitt, A.↗
NASA NTRS2009

Remotely Piloted Vehicles for Experimental Flight Control Testing

A successful flight test and training campaign of the NASA Flying Controls Testbed was conducted at Naval Outlying Field, Webster Field, MD during 2008. Both the prop and jet-powered versions of the subscale, remotely piloted testbeds were used to test representative experimental flight controllers. These testbeds were developed by the Subsonic Fixed Wing Project s emphasis on new flight test techniques. The Subsonic Fixed Wing Project is under the Fundamental Aeronautics Program of NASA's Aeronautics Research Mission Directorate (ARMD). The purpose of these testbeds is to quickly and inexpensively evaluate advanced concepts and experimental flight controls, with applications to adaptive control, system identification, novel control effectors, correlation of subscale flight tests with wind tunnel results, and autonomous operations. Flight tests and operator training were conducted during four separate series of tests during April, May, June and August 2008. Experimental controllers were engaged and disengaged during fully autonomous flight in the designated test area. Flaps and landing gear were deployed by commands from the ground control station as unanticipated disturbances. The flight tests were performed NASA personnel with support from the Maritime Unmanned Development and Operations (MUDO) team of the Naval Air Warfare Center, Aircraft Division

Motter, Mark A.↗
NASA NTRSDate not supplied

Electrical Endurance to Extrinsic Aging of Polyphenylsulfone-Boron Nitride Composite Insulation for Aeronautical Power Systems

Various insulating materials which can be potentially used in energy application, especially in electrified transportation, are investigated in this paper. They are based on Polyphenylsulfone matrix filled by macro and nano hexagonal Boron-nitride particles. Our study focuses on electrical properties, particularly endurance to partial discharges. Upon developing an original testing procedure and adequate partial discharge inception modeling, it is shown that that the h-BN micron and nano fillers can significantly improve the dielectric strength and resistance of PPSU to extrinsic aging, even in comparison with the insulating material typically used for electrified transportation, i.e., corona resistant polyimide. Also, a new diagnostic marker, extracted from partial discharge monitoring and analytics obtained by an innovative software, i.e., the likelihood surface discharge identification, seems to be very promising for dynamic residual life prediction for an insulation system subjected to surface discharges.

Polyphenylsulfone (PPSU)↗