Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer Matrix Composites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Additively Manufactured, Lightweight, Low-Cost Composite Vessels for Compressed Natural Gas Fuel Storage

This project will develop a process to combine AM via direct ink writing (DIW) technology for CFC printing and to use design optimization tools pioneered at LLNL, with advances in resin/composite formulation enabled by chemical and nano-material modification to produce lightweight low-cost CNG tanks. Our approach will yield sub-scale prototype composite pressure tanks equivalent to Type-5 CNG vessel designs that demonstrate a potential cost-benefit advantage. Central to our vision is using agile AM and design based on computationally informed DIW of both short and continuous CF, further coupled with high-performance thermoset polymer matrixes modified by emergent nanomaterials. Our single-stage, multi-material AM technology, combined with a decreased volume fraction of CF and an increased proportion of economically advantaged short fiber, all together drive the reduction in manufacturing time and overall cost. Importantly, reductions in continuous fiber and overall fiber volume fraction will be achieved without detriment to the mechanical strength of the composite vessel. This will be achieved by employing a single process using multi materials grading involving a thermoset resin “ink” modified with aligned nanoplatelets to leverage the efficient tortuous-path gas barrier effect, printed as an inner flexible gas barrier as the initial stage in our manufacturing process before compositionally grading the AM feedstock in real-time to transition to a rigid, structural CF-filled resin. The proposed hybrid construction is projected to achieve pressure ratings at a service range of 2,900–3,600 psi with a 3× burst safety factor comparable to conventional filament-wound composite tanks with an estimated 30–50% reduction in total manufacturing cost.

03 NATURAL GAS↗
DOE OSTI2020

A Solubility Comparison of Cyclotetramethylenetetranitramine (HMX) and Potential Mock-HMX Candidates in Solvents Relevant to Slurry Formulating Polymer-Bonded Materials

Understanding solubility behavior of organic crystalline materials is critical in the development of slurry-formulated plastic bonded composites. In the field of high explosives (HE), a common method for obtaining high density, greater than 95 % theoretical maximum density, is to encapsulate HE in a polymer matrix resulting in the formation of plastic bonded explosive (PBX) prills. Prill formation is highly nuanced and requires understanding of particle size distributions, solvent, antisolvent, and binder system as well as interactions thereof. In this paper, in an effort to create mock-HE that mimics HE in density and mechanical strength, solubility of candidate molecules was compared to cyclotetramethylenetetranitramine (HMX) in binder solvents relevant to prill formation. The results indicate that the mock candidates chosen for this study have different solubilities compared to HMX in water and both organic solvents, 2-butanone and ethyl acetate, investigated. With these solubility differences known, prills to match PBXs based on HMX can be formulated, pressed and tested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Additively Manufactured Carbon Fiber-Reinforced Siliconized Silicon Carbide Composites Using Carbon Fiber-Reinforced Poly-Ether-Ether-Ketone (PEEK) as a Precursor

Herein, we report a method to additively manufacture carbon fiber-reinforced siliconized silicon carbide composites. The process involves the pyrolysis of a 3D-printed carbon fiber-reinforced poly-ether-ether-ketone (PEEK) composite to produce a porous carbon fiber-reinforced carbon matrix composite preform, which is subsequently infiltrated with molten silicon to obtain a carbon fiber-reinforced siliconized silicon carbide composite. A key aspect of the method is limiting polymer melt flow during pyrolysis of PEEK, which is achieved by thermally annealing the 3D-printed carbon fiber-reinforced PEEK preform in air at a temperature below PEEK’s melting temperature. Rheological and differential scanning calorimetry (DSC) measurements demonstrate that the thermal annealing treatment altered the melting behavior of PEEK, while NMR and FTIR measurements provided a mechanistic explanation for the structural changes responsible for the behavior. It was also found that dimensional changes during pyrolysis were anisotropic with greater shrinkage in the stacking direction of the material.

Yoon, Bola [ORNL] (ORCID:0000000260875373)↗
DOE OSTI2020

Evaluating Novel Polymer-Composite Resins for the Ability to Derive Elastic Properties for Explicit Formulations, or to Develop Nonlinear Models Thereof

This project evaluates the ability to derive elastic material properties for novel additively manufactured carbon-polymer matrix materials. Initially stress-strain equilibrium equations were thought to be sufficient to characterize the elastic region of material performance. However, initial test data shows the cured material behaves nonlinearly in the elastic region. To properly determine the elastic performance, additional strain data must be collected in future testing. This paper discusses the initial test data, methods and models used to describe nonlinear elasticity, and the determination of mean elastic material properties, such as Lame’s constants, using the stress-strain equilibrium equations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of chemical composition and physicochemical properties of poplar biomass on the performance of 3D printed poplar-reinforced PLA materials

Lignocellulosic biomass has been well-acknowledged as a filler for making 3D printed composites. The technical performances of composites were influenced by the characteristics of the components. The correlations between poplar biomass properties and the mechanical and thermal performances of the 3D printed poplar-plastic composites were investigated. The characteristics of poplar were modified by different pretreatment methods, including using hot water, dilute acid, and organic solvent (organosolv), and each treated poplar biomass was applied as a filler in a polylactic acid (PLA) polymer matrix to produce eco-friendly materials. These solvent pretreatments increased the hydrophobicity and surface area of poplar. Organosolv treated poplar showed the highest cellulose content and significantly increased Young's modulus of its biocomposites. Principal component analysis revealed that the specific surface area and water contact angle of biomass contributed to the thermal stability of biocomposites. Additionally, the degree of polymerization of cellulose and xylan content within the biomass correlated with the biocomposites' break stress. Notably, the crystallinity of biocomposites impacted the modulus of these materials. The reported relationships between biomass characteristics and 3D printed composite behaviors provide guidance for optimizing biomass processing in biocomposite applications.

Ji, Anqi [State Univ. of New York (SUNY), Syracuse↗
DOE OSTI2023

Silicon carbide fiber composite receiver tubes manufactured by PIP process

The performance of SiC fiber composites made by a polymer infiltration and pyrolysis (PIP) process was investigated. Two types of tubular composites were manufactured using Hi-Nicalon and Nicalon-CG silicon carbide fibers infiltrated with SMP10 silicon carbide matrix. The fiber content in both composites was about 25 vol.% with an average density of 2.39 g/cc. The tubular SiC composites showed stable solar absorptance and emittance of 0.97 and 0.91, respectively, at 800 °C. The composites were thermally shocked at 900, 1000, and 1100 °C with a waterjet simulating raindrops. As a result, the hoop tensile strength of the composites revealed no loss of mechanical strength due to the thermal shock experiments up to 1100 °C.

14 SOLAR ENERGY↗
DOE OSTI2020

Tritium Effects on Aromatic Carbon–Loaded Polymers

By incorporating carbon nanotubes (CNTs) and graphene nanomaterials with aromatic sp2 carbon structures, we have specifically tuned filled ethylene propylene diene monomer elastomer (EPDM) seal and gasket composite materials for radiation resistance. Our results show that CNTs and graphene have an increased ability to stabilize the EPDM matrix compared to standard carbon black (CB) as a radiation-resistant filler. Here, graphene outperforms both CNT and CB fillers when considering surface damage under conditions where beta exposure is an issue. Both graphene and CNT fillers offer significantly reduced changes in glass transition temperature under prolonged exposure to tritium compared to CB-filled standards, with a 2.5-fold and almost 5-fold reduction, respectively. Thus, CNT- and graphene-filled O-ring materials could be designed that would maintain acceptable seals significantly longer than currently used composites.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Crystallization kinetics and nanoparticle ordering in semicrystalline polymer nanocomposites

There has been considerable interest in the nucleation and crystallization of polymers in the presence of nanoparticles (NPs, or nanofillers in general, NFs). Most of the extensive work in this area has focused on anisotropic, non-Brownian NFs (e.g., clay sheets, carbon nanotubes) whose spatial dispersion state in these nanocomposites is controlled by the process by which they are formed. Hence, NF spatial dispersion is generally limited and often remains poorly characterized. Thermodynamic handles that can be used to control NF dispersion state in the polymer melt include (a) favorable interactions between the polymer chains and the bare NP surfaces, or (b) the density and length of the chains, with the same chemistry as the matrix, grafted to the NP surface. These relatively large NFs merely act as stationary objects that affect the kinetics of nucleation by providing heterogeneous sites, and the crystallization rate by confining the polymer in the melt state. The dispersion state of the NFs can dramatically affect the nucleation and crystallization of the matrix, but in most cases reported, the NFs increase nucleation efficiency relative to the neat polymer. At higher NF loadings, the effect of polymer confinement by the NFs dominates, leading to a decrease in crystal growth rates. This review describes the most important lessons learned from these commonly studied systems and then extends to polymer composite systems containing small, mobile spherical NPs (typically smaller than 100 nm in size). The role of NP mobility, which provides for dynamic confinement of the polymer melt, on the kinetics of polymer crystallization (nucleation, growth, and overall crystallization) and how this behavior is mostly consistent with the case of immobile NF is a second important focus of this review. In addition to the role of NFs on crystallization kinetics, recently reported nanoparticle ordering phenomena such as the effect of matrix crystallization on the organization of small spherical NPs within the amorphous regions of the semicrystalline morphology are discussed. In conclusion, such phenomena are clearly not observed for large NFs and hence provide a point of departure from past works in this area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effects of PLA/PHB Blend Ratio and Wood Flour Loading on the Melt Rheology and Thermomechanical Properties of Biobased Polymer Composites

The development of sustainable, biobased polymer composites is crucial for reducing supply chain dependence on fossil fuels. A major challenge lies in understanding and predicting the processability of these sustainable material alternatives, which directly impacts large-scale manufacturing. Here, this study systematically investigates the effect of poly(lactic acid) (PLA)/polyhydroxybutyrate (PHB) blend ratios and wood flour (WF) loadings on the thermal, rheological, and mechanical properties of the composites. Composites were prepared via melt compounding and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), oscillatory shear melt rheology, tensile testing, and scanning electron microscopy. Results showed that increasing the PHB content lowered the glass transition temperature, while higher PHB and WF loadings decreased thermal stability. Complex viscosity decreased with increasing PHB in 0 and 10% WF, whereas it increased in 20% and 30% WF for PHB-rich blends (80/20 and 70/30 PLA/PHB) due to stronger filler interactions with flexible PHB chains. At 30% WF, PHB-containing composites also showed elastic dominance with G′ higher than G″. This behavior was confirmed by van Gurp–Palmen plots, where the phase angle decreased with increasing PHB and WF loadings. WF addition also shifted Cole–Cole plots away from semicircular terminal relaxation, while time–temperature superposition validity was maintained, confirming that polymer chain dynamics continue to dominate melt behavior. Young’s modulus increased with WF loading, while tensile strength and toughness decreased due to weaker interfacial adhesion between the matrix and the filler. Interestingly, 10% WF systems containing PHB exhibited the highest toughness among all of the filled systems, indicating synergistic reinforcement from WF fillers and PHB-induced ductility. Overall, melt rheology effectively captured the internal structure and stiffness of the composites as the formulation changed, reinforcing the concept that the PLA/PHB ratio and WF content can be tuned to adjust melt elasticity and balance mechanical property trade-offs for targeted applications.

melt rheology↗
DOE OSTI2025

Feedstock Variability: Differences Among Biomass Anatomical Fractions and Tissues

Corn stover is a versatile feedstock for producing biofuels and other sustainable products. However, its diverse chemical and physical attributes can hinder the processes that convert it into these compounds. The composition of corn stover varies according to factors including corn plant variety, cultivation conditions and maturity at harvest. In essence, corn stover consists of the polymers cellulose, hemicellulose and lignin. The structural core of plant cell walls consists of elongated chains of glucose molecules arranged in bundles of cellulose. Additionally, lower concentrations of hemicellulose, a complex carbohydrate composed of various sugars, form part of the matrix surrounding cellulose bundles. Lignin is a complex aromatic polymer that reinforces plant cell walls. Corn stover generally comprises 40%-50% cellulose, 20%-30% hemicellulose, and 20%-30% lignin. The ratios of these components vary based on the specific type of corn plant and the growth conditions. For example, corn plants cultivated in drought conditions exhibit higher lignin levels than those grown under optimal conditions. The compositional diversity resulting from growth conditions is most pronounced among the different anatomical fractions of the corn plant. Understanding and accommodating the variation among the anatomical fractions of corn stover can enhance the effective utilization of this resource.

09 BIOMASS FUELS↗
DOE OSTI2020

Easy-Processable and Aging-Free All-Polymer Polysiloxane Composites

In this work, we report all-polymer polysiloxane composites that overcome the long-standing processing problems of silica-reinforced silicone rubbers. Polystyrene fillers are dispersed with styrene/dimethylsiloxane symmetric diblock and triblock copolymers that control the filler morphology, filler–matrix interactions, and filler–filler interactions. Surprisingly, the composites not only rival the traditional silica-reinforced polysiloxane in mechanical properties of cured materials but also have better processability and stability than the silica-filled compound before curing. Large amplitude oscillatory shear experiments demonstrate that the triblock copolymer addition strongly affects the rheological properties. We hypothesize that the bridges and entangled loops that were formed by the triblock copolymer can connect different PS domains to provide additional reinforcement. The aging effect that originates from PDMS chain adsorption on the filler particle surface is also avoided because of the thermodynamic repulsion between PS and PDMS phases.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Understanding surfaces and interfaces in nanocomposites of silicone and barium titanate through experiments and modeling

Barium titanate (BTO) is a ferroelectric perovskite used in electronics and energy storage systems because of its high dielectric constant. Decreasing the BTO particle size was shown to increase the dielectric constant of the perovskite, which is an intriguing but contested result. We investigated this result by fabricating silicone-matrix nanocomposite specimens containing BTO particles of decreasing diameter. Furthermore, density functional theory modeling was used to understand the interactions at the BTO particle surface. Combining results from experiments and modeling indicated that polymer type, particle surface interactions, and particle surface structure can influence the dielectric properties of polymer-matrix nanocomposites containing BTO.

composite↗
DOE OSTI2025

Sizing of discontinuous natural fibers: Effect of sizing approach and sizing concentration on composite properties

Natural fiber reinforced composites (NFRCs) are gaining attention in automotive applications as an alternative to glass fiber composites due to their lightweight and renewable sourcing. However, the inherent hydrophilicity of natural fibers leads to poor compatibility with hydrophobic polymers which adversely affects the mechanical properties of the composites and can limit their application to non-structural parts. Sizing is a common approach used for synthetic fibers to improve the interface between fiber and matrix. However, there is limited study on the sizing of natural fibers, and hence the focus of this work. Here, in this study, two different approaches to sizing discontinuous coir fibers were investigated, namely; (1) ex-situ sizing and (2) in-situ sizing. A commercial polypropylene (PP) based sizing agent was used and the effects of varying sizing solution concentrations (1.5, 2.5, and 3.5 wt%) on the properties of the composites was studied. Results showed that composites prepared via the in-situ sizing process had better fiber–matrix adhesion and improved tensile properties compared to ex-situ sized composites. On studying the effect of different sizing concentrations on composite properties, we found that the tensile strength of the composites increased (by ∼ 42 %) up to 2.5 wt% sizing concentration (in solution) and then decreased. However, the impact strength decreased significantly on increasing the sizing content beyond 1.5 wt% (by ∼ 40 %). Additionally, the study was further extended to investigate the effect of sizing on different NFRCs (coir, banana, and cottonized hemp fiber) where effectiveness of sizing was found to be influenced by the fiber surface morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Redox enzyme-embedded pyrene-poly(ethylenimine) hydrogel electrode for electrosynthesis

Devices, systems, and compositions of matter involving enzyme-mediated bioelectrocatalysis are disclosed and described. An enzyme electrode can include an electrode, a bioelectric material coupled to the electrode, the bioelectric material further including a water-permeable polymer matrix, a planar linker covalently coupled to the water-permeable polymer matrix and noncovalently coupled to the electrode, and electrochemically active oxidoreductase enzyme molecules functionally embedded in the water-permeable polymer matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Recyclable CFRPs with extremely high T g : hydrothermal recyclability in pure water and upcycling of the recyclates for new composite preparation

In recent years researchers have introduced different malleable and/or degradable thermosetting polymers to address the recyclability of traditional thermoset materials. Nonetheless, the mechanical properties and glass transition temperature (T g ) of these polymers are often compromised to achieve the desired depolymerization rate. In this work, a hydrothermally recyclable epoxy/anhydride thermosetting system with superior mechanical performance and high T g (>200 °C) was developed for carbon fiber reinforced plastic (CFRP) applications, using triethanolamine as the co-curing agent and tetraglycidyl methylenedianiline (TGDDM) as the epoxy matrix. The hydrothermal recycling of such cured systems is achieved at relatively low temperature (200 °C) without the addition of a catalyst. This mild recycling process decomposes the recyclable polymer matrix into an oligomer and imparts little damage to the valuable carbon fiber. The recycled carbon fiber and the decomposed polymer resin are reused to prepare a new CFRP. Here, this study has introduced a simple and practical approach for the preparation of recyclable CFRPs with high T g and a pathway for highly efficient closed-loop recycling, which sets up a framework for the future design of sustainable polymer composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fluid-like shock compression of dilute polymer nanocomposites

The shock Hugoniot of heterogenous mixtures of discrete particles has been experimentally investigated for porous agglomerates and fluids, while the study of full-density solids has been primarily limited to compressed powders and high-dimensional composites. By dispersing ceria nanoparticles in a polyethylene matrix, we are able to examine the hydrodynamic behavior of a nonporous, heterogenous solid in thermal equilibrium during weak shock compression. Phase-driven discontinuities in the Hugoniot particle velocity–shock velocity (u−D) relationship of pure polyethylene are replicated in the nanocomposites but are shifted to lower velocity and to higher pressure with higher particle concentration. The results are explained using an isothermal, two-velocity fluid model under the hydrodynamic approximation. The model, which assumes a theoretical equation-of-state for ceria and either a low-order or high-order fit to the measured polyethylene Hugoniot, reasonably predicts the Hugoniot for two different polyethylene/ceria nanocomposites. Using the model, the mixture Hugoniot is shown to be insensitive to the Hugoniot of the stiffer constituent when the moduli are sufficiently disparate, while dependence on particle density and volume fraction is preserved through fluid-like motion.

Moore, Nathan W. [Sandia National Laboratories (SN↗
DOE OSTI2022

Methods and apparatus for additive manufacturing utilizing multifunctional composite materials, and articles made therefrom

A method of depositing a multiphase material. The method includes providing a Continuous Multifunctional Composite (CMC) phase containing at least one continuous element in a polymeric matrix, passing the CMC phase through a feeding system containing a cutting system, producing a predetermined length of the CMC phase, providing a flow a molten polymer such that the molten polymer and the CMC phase are merged into a continuous co-extrusion nozzle so as to produce a co-extruded multiphase material, and depositing the co-extruded multiphase material onto a surface. An apparatus for depositing a multiphase material. The apparatus contains a co-extrusion nozzle, a means to introduce a CMC phase and a molten polymer into the co-extrusion nozzle, such that the molten polymer and the CMC phase are co-extruded and deposited on a surface. An article containing a CMC phase containing continuous elements embedded in a polymer resin forming a multiphase structure.

Barocio, Eduardo↗