Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polyethylene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Crosslinked polymer gel electrolytes based on polyethylene glycol methacrylate and ionic liquid for lithium battery applications

Gel polymer electrolytes were synthesized by copolymerization polyethylene glycol methyl ether methacrylate with polyethylene glycol dimethacrylate in the presence of a room temperature ionic liquid, methylpropylpyrrolidinium bis(trifluoromethanesulfonyl)imide (MPPY TFSI). The physical properties of gel polymer electrolytes were characterized by thermal analysis, impedance spectroscopy, and electrochemical tests. The ionic conductivities of the gel polymer electrolytes increased linearly with the amount of MPPY TFSI and were mainly attributed to the increased ion mobility as evidenced by the decreased glass transition temperatures. Li||LiFePO4 cells were assembled using the gel polymer electrolytes containing 80 wt% MPPY TFSI via an in situ polymerization method. A reversible cell capacity of 90 mAh g 1 was maintained under the current density of C/10 at room temperature, which was increased to 130 mAh g 1 by using a thinner membrane and cycling at 50 C.

Liao, Chen↗

Benchmarking GEANT4 and PHITS for 14.8-MeV neutron transport in polyethylene and graphite materials

The feasibility of GEANT4 and PHITS with ENDF/B-VIII.0, JEFF-3.3 and JENDL-4.0 evaluated nuclear data libraries in 14.8-MeV neutron transport simulation are verified by comparing with the MCNP calculations and the experimental data. Here the measured data are from neutron integral experiments including graphite and polyethylene samples. For 6 cm-thick polyethylene and 20 cm-thick graphite samples, the results from GEANT4 and PHITS with three evaluated nuclear data libraries agree well with the MCNP calculations. For a 2 cm-thick graphite sample, the simulated results from GEANT4 and PHITS agree with the MCNP calculations, and they all underestimate the experiment data in below 3 MeV and overestimate them in the energy range of 5–7 MeV. The difference between the simulation results and the experimental data depends on the evaluated nuclear data libraries. In overall, GEANT4 and PHITS are performing reasonable jobs for 14.8-MeV neutron transport simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low temperature upcycling of polyethylene to gasoline range chemicals: Hydrogen transfer and heat compensation to endothermic pyrolysis reaction over zeolites

Selective production of gasoline ranged chemicals were of great interest in the field of plastic upcycling. Here this work reports exothermic hydrogen transfer reaction which was observed when HY zeolite was adopted to catalytic pyrolyze the polyethylene to gasoline ranged chemicals, while it was not observed when H-ZSM5 was used as catalyst. Both zeolite catalysts could significantly bring down the reaction temperature from 500 to 300–350 °C. TG-FITR analysis revealed that products obtained with HY zeolites were dominated with saturated hydrocarbons as compared to H-ZSM5 where the combination of alkanes, alkenes, and aromatics was obtained. In addition to the formation of saturated compounds, the TG-DSC analysis confirmed that, over the HY zeolites, the endothermic hydrogen transfer reaction of olefins occurred along with the pyrolysis of LDPE visibly when the zeolite ratio in the zeolite/polyethylene mixture exceeded 50% by mass. The TG results also indicated that the polyethylene undergone nearly 100% converted with very few residues. Further product analysis from batch pyrolysis by GC-MS confirmed that gasoline ranged iso-alkanes were produced over HY zeolite. This study highlighted that coupling exothermic hydrogen transfer reactions with endothermic pyrolysis could be an energy-efficient way of producing gasoline ranged chemicals. Chemical upcycling of plastics is tunable by using different zeolite combinations for the formation of desired products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-pot synthesis of mechanically robust hierarchical graphene-polyethylene aerogels

Fabricating mechanically robust graphene aerogels (GAs) without compromising their notable features including superelasticity, large surface area, high porosity, and low density is challenging. Here, this work presents a new one-pot strategy based on ambient drying to fabricate a three-dimensional (3D) graphene-polyethylene aerogel (G-PEA) with a unique hierarchical porous structure, in which the highly porous polyethylene is encapsulated by graphene frameworks. The hierarchical G-PEA exhibited substantially enhanced compressive strength while maintaining low density and superelasticity comparable to those of bare GAs. The G-PEAs with 5 wt% PE (G-PEA5) showed a significant improvement (up to 2083 %) in compressive stress compared to bare GAs, which can be attributed to the porous PE support within the GA framework. The G-PEA5 retained 94% of its compressive stress after 100 compression cycles, which is still higher than that (∼80%) of bare GAs, and maintained good elastic recovery. The designed hierarchical G-PEAs show great promise in the applications that require outstanding mechanical properties.

Composite↗

Radon daughter plate-out measurements at SNOLAB for polyethylene and copper

We report that polyethylene and copper samples were exposed to the underground air at SNOLAB for approximately three months while several environmental factors were monitored. Predictions of the radon-daughter plate-out rate are compared to the resulting surface activities, obtained from high-sensitivity measurements of alpha emissivity using the XIA UltraLo-1800 spectrometer at Southern Methodist University. From these measurements, we determine an average 210 Pb plate-out rate of 249 and 423 atoms/day/cm 2 for polyethylene and copper, respectively, when exposed to radon activity concentration of 135 Bq/m 3 at SNOLAB. Finally, a time-dependent model of alpha activity is discussed for these materials placed in similar environmental conditions.

36 MATERIALS SCIENCE↗

Molecular and Kinetic Models for High-rate Thermal Degradation of Polyethylene

Thermal degradation of polyethylene is studied under the extremely high rate temperature ramps expected in laser-driven and X-ray ablation experiments—from 10 10 to 10 14 K/s in isochoric, condensed phases. The molecular evolution and macroscopic state variables are extracted as a function of density from reactive molecular dynamics simulations using the ReaxFF potential. The enthalpy, dissociation onset temperature, bond evolution, and observed cross-linking are shown to be rate dependent. These results are used to parametrize a kinetic rate model for the decomposition and coalescence of hydrocarbons as a function of temperature, temperature ramp rate, and density. In conclusion, the results are contrasted to first-order random-scission macrokinetic models often assumed for pyrolysis of linear polyethylene under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Periodicity and Acid Chemistry on the Morphological Evolution and Strength in Precise Polyethylenes

We report herein the morphology evolution under tensile deformation for strictly linear polyethylenes with associating functional groups. In situ X-ray scattering measurements during elongation reveal that periodic acid group placement along the backbone is required to form hierarchical layered morphologies that lead to strain hardening. This phenomenon was observed in both semicrystalline and amorphous precise acid polyethylenes with acrylic, geminal acrylic, and phosphonic acids. Polymers with nonperiodic (pseudorandom) acid placement fail to form layered morphologies and instead retain a liquidlike distribution of acid aggregates. Acid chemistry and acid concentration influence morphological evolution in both periodic and nonperiodic polymers predominately through the modification of T g and percent crystallinity, which subsequently impact the mechanical properties. Our results indicate that hierarchical acid-rich layered structures, commensurate with improved mechanical properties, form in polymers with strictly periodic chemical structures and sufficient chain mobility for chain alignment during elongation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneous chain dynamics and aggregate lifetimes in precise acid-containing polyethylenes: Experiments and simulations

Melt state dynamics for a series of strictly linear polyethylenes with precisely spaced associating functional groups were investigated. The periodic pendant acrylic acid groups form hydrogen-bonded acid aggregates within the polyethylene (PE) matrix. The dynamics of these nanoscale heterogeneous morphologies were investigated from picosecond to nanosecond timescales by both quasi-elastic neutron scattering (QENS) measurements and fully atomistic molecular dynamics (MD) simulations. Two dynamic processes were observed. The faster dynamic processes which occur at the picosecond timescales are compositionally insensitive and indicative of spatially restricted local motions. The slower dynamic processes are highly composition dependent and indicate the structural relaxation of the polymer backbone. Higher acid contents, or shorter PE spacers between pendant acid groups, slow the structural relaxation timescale and increase the stretching parameter (β) of the structural relaxation. Additionally, the dynamics of specific hydrogen atom positions along the backbone correlate structural heterogeneity imposed by the associating acid groups with a mobility gradient along the polymer backbone. At time intervals (<2 ns), the mean-squared displacements for the four methylene groups closest to the acid groups are up to 10 times smaller than those of methylene groups further from the acid groups. At longer timescales acid aggregates rearrange and the chain dynamics of the slow, near-aggregate regions and the faster bridge regions converge, implying a characteristic timescale for the passage of chains between aggregates. As a result, the characterization of the nanoscale chain dynamics in these associating polymer systems both provides validation of simulation force fields and provides understanding of heterogeneous chain dynamics in associating polymers.

36 MATERIALS SCIENCE↗

Nanoconfinement and Salt Synergistically Suppress Crystallization in Polyethylene Oxide

Suppressing the crystallization of polyether-based solid electrolytes is a widely sought-after strategy to improve ionic conductivity. We report the effects of nanoconfinement on polyethylene oxide electrolytes. We find that neat polyethylene oxide responds to nanoconfinement by adopting a preferred orientation, yet is able to crystallize even in nanoconfinement volumes with widths as small as 8 nm. However the combination of nanoconfinement and salt addition does suppress polymer crystallization at room temperature, even though either factor alone cannot. Such synergistic suppression of crystallization has implications for polymer electrolytes, since amorphous rather than crystalline domains predominantly contribute to ionic conduction. Our results suggest that salts previously discounted due to their inability to suppress crystallinity in bulk materials could be made viable when combined with nanoconfinement, thereby opening new possibilities for high-performance solid polymer electrolytes.

36 MATERIALS SCIENCE↗

Catalytic Deconstruction of Ethylene Vinyl Acetate Copolymer and Polyethylene Mixtures via Hydroconversion: Challenges and Solutions

We explore hydrogenolysis over ruthenium supported on zirconia (Ru/ZrO 2 ) and hydrocracking over platinum (Pt) supported on zeolites as an effective end-of-life strategy for ethylene vinyl acetate (EVA)–a widely used performance heat sealant in hard-to-recycle multilayer packaging. For Ru/ZrO 2 hydrogenolysis, EVA reacts slower than low-density polyethylene (LDPE) and the catalyst deactivates due to carbonaceous deposits originating from polyenes generated in situ during EVA thermal degradation. High H 2 pressures and temperatures can overcome catalyst deactivation; however, CH 4 yields are excessive due to cascade hydrogenolysis stemming from strong C=C/metal interactions. Polyene hydrogenation allows chains anchored by C=C to desorb from Ru, shifting product selectivity from CH 4 to higher-value liquids. Hydrogenolysis of mixed EVA and linear low-density polyethylene (LLDPE), mirroring typical frozen food packaging formulations, results in comparable catalyst activity and CH 4 yield as the pure EVA resin. For Pt/zeolite hydrocracking, pure EVA and EVA:LLDPE mixtures are deconstructed to propane or light naphtha with minimal CH 4 production. Among catalysts tested, Pt/HY gives the highest liquid productivity (g C5+products /g cat ·h). Furthermore, these findings showcase the recalcitrant nature of EVA and its associated mixtures for Ru/ZrO 2 hydrogenolysis, highlighting that hydrocracking catalysts may be superior for complex packaging waste.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Chemical Recycling of Post-Consumer Polyethylene

Among commercial plastics, polyolefins are the most widely produced worldwide but have limited recyclability. Here, we report a chemical recycling route for the conversion of post-consumer high-density polyethylene (HDPE) into telechelic macromonomers suitable for circular reprocessing. Unsaturation was introduced into HDPE by catalytic dehydrogenation using an Ir-POCOP catalyst without an alkene acceptor. Cross-metathesis with 2-hydroxyethyl acrylate followed by hydrogenation transformed the partially unsaturated HDPE into telechelic macromonomers. The direct repolymerization of the macromonomers gave a brittle material due to the low overall weight-average molecular weight. Aminolysis of telechelic macromonomers with a small amount of diethanolamine increased the overall functionality. The resulting macromonomers were repolymerized through transesterification to generate a polymer with comparable mechanical properties to the starting post-consumer HDPE waste. Finally, depolymerization of the repolymerized material catalyzed by an organic base regenerated the telechelic macromonomers, thereby allowing waste polyethylene materials to enter a chemical recycling pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Properties of Poly(vinyl chloride)- b -polyethylene Multiblock Copolymers through the Hydrodechlorination of PVC with Silylium Ions

Polymer compatibilizers stabilize the interface between two immiscible polymers to allow for a material that improves properties for additional use. Chlorinated polyethylene (CPE) is a common compatibilizer, yet there does not exist a synthetic pathway either from monomers or via the functionalization of polyethylene (PE) to yield a polymer that has a controlled chlorine amount and primary structure along the polymer chain. Herein, we report a series of novel block copolymers of poly(vinyl chloride) (PVC) and PE, synthesized through selective hydrodechlorination of PVC. Contrary to CPE, the full range of chlorination can be obtained and the block number can be altered. Interfacial adhesion studies reveal samples with competitive compatibilization of PVC/polyolefin elastomer blends (POE). In conclusion, this method shows that post-polymerization modification can be a strategic top-down synthesis to achieve high performance polymers.

Wood, Zachary A. [Univ. of Southern California, Lo↗

A Stepwise "Micellization-Crystallization" Route to Oblate Ellipsoidal, Cylindrical, and Bilayer Micelles with Polyethylene Cores in Water

Micellar polymorphism from block copolymers has been well documented, but most attention has focused on noncrystalline hydrophobic systems. We have investigated the micellization in water of model diblock copolymers with semicrystalline polyethylene (PE) as the core-forming component. Poly(N,N-dimethylacrylamide)–polyethylene (AE) diblock copolymers were synthesized by a combination of anionic and RAFT polymerizations. The bulk nanostructures were probed by small-angle X-ray scattering (SAXS) and AE diblock copolymers were found to be moderately segregated at 140 °C. Dispersions of AE amphiphiles in water were prepared by direct dissolution at 120 °C (i.e., above the melting transition of PE) followed by cooling to 25 °C. By manipulating the composition of AE diblock copolymers, discrete structures with oblate ellipsoidal, cylindrical, and bilayer morphologies were produced, as evidenced in cryogenic transmission electron microscopy (cryo-TEM). The self-assembled aggregates were also studied by small-angle neutron scattering (SANS) and dilute solution rheology. The semicrystalline nature of the nanostructures was further revealed by differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS). A stepwise “micellization–crystallization” process was proposed as the micelle formation mechanism, as supported by the existence of similar nanostructures at 120 °C using SANS. This strategy holds promise for a general protocol toward the production of giant wormlike micelles and vesicles with semicrystalline polymeric cores.

Yin, Ligeng↗

Warming up human body by nanoporous metallized polyethylene textile

Space heating accounts for the largest energy end-use of buildings that imposes significant burden on the society. The energy wasted for heating the empty space of the entire building can be saved by passively heating the immediate environment around the human body. Here, we demonstrate a nanophotonic structure textile with tailored infrared (IR) property for passive personal heating using nanoporous metallized polyethylene. By constructing an IR-reflective layer on an IR-transparent layer with embedded nanopores, the nanoporous metallized polyethylene textile achieves a minimal IR emissivity (10.1%) on the outer surface that effectively suppresses heat radiation loss without sacrificing wearing comfort. This enables 7.1 °C decrease of the set-point compared to normal textile, greatly outperforming other radiative heating textiles by more than 3 °C. This large set-point expansion can save more than 35% of building heating energy in a cost-effective way, and ultimately contribute to the relief of global energy and climate issues.

36 MATERIALS SCIENCE↗

Upcycling of polyethylene to gasoline through a self-supplied hydrogen strategy in a layered self-pillared zeolite

Conversion of plastic wastes to valuable carbon resources without using noble metal catalysts or external hydrogen remains a challenging task. Here we report a layered self-pillared zeolite that enables the conversion of polyethylene to gasoline with a remarkable selectivity of 99% and yields of >80% in 4 h at 240 °C. The liquid product is primarily composed of branched alkanes (selectivity of 72%), affording a high research octane number of 88.0 that is comparable to commercial gasoline (86.6). In situ inelastic neutron scattering, small-angle neutron scattering, solid-state nuclear magnetic resonance, X-ray absorption spectroscopy and isotope-labelling experiments reveal that the activation of polyethylene is promoted by the open framework tri-coordinated Al sites of the zeolite, followed by β-scission and isomerization on Brönsted acids sites, accompanied by hydride transfer over open framework tri-coordinated Al sites through a self-supplied hydrogen pathway to yield selectivity to branched alkanes. This study shows the potential of layered zeolite materials in enabling the upcycling of plastic wastes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic closed-loop recycling of polyethylene-like materials produced by acceptorless dehydrogenative polymerization of bio-derived diols

Petroleum-derived polyolefins exhibit diverse properties and are the most important and largest volume class of plastics. However, polyolefins are difficult to efficiently recycle or break down and are now a persistent global contaminant. Broadly replacing polyolefins with bio-derived and degradable polyethylene-like materials is an important yet challenging endeavour towards sustainable plastics. Here, in this study, we report a solution for circular bio-based polyethylene-like materials synthesized by acceptorless dehydrogenative polymerization from linear and branched diols and their catalytic closed-loop recycling. The polymerization and depolymerization processes utilize earth-abundant manganese complexes as catalysts. These materials exhibit a wide range of mechanical properties, encompassing thermoplastics to plastomers to elastomers. The branched diols, produced through a thiol-ene click reaction, can be polymerized to plastics with significantly enhanced tensile properties, toughness and adhesive properties. These materials could be depolymerized back to monomers through hydrogenation and were separatable with a monomer recovery of up to 99%, unaffected by the presence of dyes and additives. Overall, this system establishes a route to more sustainable plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for Crystalline Structure in Dynamically-Compressed Polyethylene up to 200 GPa

Abstract We investigated the high-pressure behavior of polyethylene (CH 2 ) by probing dynamically-compressed samples with X-ray diffraction. At pressures up to 200 GPa, comparable to those present inside icy giant planets (Uranus, Neptune), shock-compressed polyethylene retains a polymer crystal structure, from which we infer the presence of significant covalent bonding. The A 2 /m structure which we observe has previously been seen at significantly lower pressures, and the equation of state measured agrees with our findings. This result appears to contrast with recent data from shock-compressed polystyrene (CH) at higher temperatures, which demonstrated demixing and recrystallization into a diamond lattice, implying the breaking of the original chemical bonds. As such chemical processes have significant implications for the structure and energy transfer within ice giants, our results highlight the need for a deeper understanding of the chemistry of high pressure hydrocarbons, and the importance of better constraining planetary temperature profiles.

36 MATERIALS SCIENCE↗

Catalytic upcycling of high-density polyethylene via a processive mechanism

The overconsumption of single-use plastics is creating a global waste catastrophe, with widespread environmental, economic and health-related consequences. In this work we show that the benefits of processive enzyme-catalysed conversions of biomacromolecules can be leveraged to affect the selective hydrogenolysis of high-density polyethylene into a narrow distribution of diesel and lubricant-range alkanes using an ordered, mesoporous shell/active site/core catalyst architecture that incorporates catalytic platinum sites at the base of the mesopores. Solid-state nuclear magnetic resonance revealed that long hydrocarbon macromolecules readily move within the pores of this catalyst, with a subsequent escape being inhibited by polymer–surface interactions, a behaviour that resembles the binding and translocation of macromolecules in the catalytic cleft of processive enzymes. Accordingly, the hydrogenolysis of polyethylene with this catalyst proceeds processively to yield a reliable, narrow and tunable stream of alkane products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗