Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Perovskite Solar Cells (PSCs)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Sustainable lead management in halide perovskite solar cells

Despite the rapid development of perovskite solar cells (PSCs) toward commercialization, the toxic lead (Pb) ions in PSCs pose a potential threat to the environment, health and safety. Managing Pb via recycling represents a promising approach to mitigating its toxicity. However, managing Pb from commonly used organic solvents has been challenging due to the lack of suitable Pb adsorbents. Here, we report a new adsorbent for both separation and recovery of Pb from PSC pollutants. The synthesized iron-incorporated hydroxyapatite possesses a strongly negatively charged surface that improves electrostatic interaction through surface-charge delocalization, thus leading to enhanced Pb adsorption. Finally, we demonstrate the feasibility of a complete Pb management process, including the purification of Pb-containing non-aqueous solvents below 15 parts per 10 9 , a level compliant with the standards of the US Environmental Protection Agency, as well as recycling of 99.97% of Pb ions by forming lead iodide.

14 SOLAR ENERGY↗
DOE OSTI2026

An Open Source Perovskite Solar Cell Curve Tracer

When developing systems for perovskite solar cells (PSCs), it is important to have a testing platform that closely resembles your deployed systems. While developing a 1 U CubeSat, the Big Red Sat-1 at the University of Nebraska-Lincoln, we found a lack of passive curve tracing instrumentation, which we needed for our mission. To that end, we developed a benchtop passive curve tracer that leverages the Ossila Solar Simulator as an AM1.5 light source. This device utilizes a ladder of switched resistors and a precision voltage and current measurement to achieve the curve tracing. It also integrates a common-anode multiplexer to switch through multipixel PSCs. Finally, the solar cell holder is separate from the main measurement system, so various substrates sizes and pixel counts can be supported. This system is tested using various PSCs. It has been open sourced to enable reuse in future systems that may benefit from the lower power consumption and flight heritage.

14 SOLAR ENERGY↗
DOE OSTI2025

Full Device Evaluation of Metal Halide Perovskite Solar Cells in Low Earth Orbit Aboard the International Space Station

This study investigates how sustained low Earth orbit (LEO) exposure affects metal halide perovskite (MHP) thin films and perovskite solar cells (PSCs). It examines samples deployed on the Materials International Space Station Experiment (MISSE) 15 and 16 missions. Five methylammonium lead iodide (MAPI) thin films are deployed on MISSE-16, each with distinct UV filters to selectively attenuate AM0 spectral bands. While post-flight optical analysis reveals that the least UV-exposed film exhibits the highest emission and lowest non-radiative recombination rate, no clear correlation is observed among the rest, and all MAPI films maintained excellent integrity throughout the mission. MISSE-15 deployed eight PSCs with diverse structures, MHP compositions, and contact materials. Post-flight analysis reveals stable, highly emissive MHPs, but damaged contacts due to ion migration, which caused loss of electrical response. The MISSE missions demonstrate MHPs' suitability for space applications, while highlighting the need for improved interfacial layers and contact materials to enhance charge carrier mobility, prevent ion migration, and improve charge carrier extraction efficiency.

14 SOLAR ENERGY↗
DOE OSTI2025

Light induced ion migration studies in perovskite solar cell using nonlinear impedance spectroscopy

Complex interactions between mobile ions and charge carriers in perovskite solar cells (PSCs) make it challenging to fully understand their dynamic interplay. Exposure to light further complicates these interactions, altering the system’s dynamics and inducing nonlinear effects that lead to changes in the J−V curve. Understanding these effects is crucial for improving the operational stability of PSCs. Impedance spectroscopy (IS) is a powerful technique for evaluating relaxation processes in the frequency domain; however, it is limited in capturing nonlinear contributions. Here, in this work, nonlinear impedance spectroscopy (NLIS) is employed to analyze the higher harmonic response to AC perturbation, both in the dark and after short-term light exposure. A shift in the low-frequency (LF) higher harmonic peak is observed after open-circuit light exposure, attributed to an altered electric field suggesting ion re-distribution, whereas closed-circuit exposure shows no LF shift, indicating minimal ion movement. Additionally, light exposure reduces higher-order admittance, more notably in open-circuit conditions, suggesting decreased recombination. Temperature-dependent analysis was conducted to characterize the activation energy of migrating species, identifying iodide as the dominant migrating ion.

14 SOLAR ENERGY↗
DOE OSTI2023

Combined Stress Testing of Perovskite Solar Cells for Stable Operation in Space

Perovskite solar cells (PSCs) could provide new low-cost opportunities for powering spacecraft. Here we are designing a PSC resilient to lunar surface conditions, focusing on contact/barrier layers combinations that maximize stability. Thermal vacuum stress shows cells with gold back-contacts and SiOx protection retain >90% of initial efficiency and indium tin oxide (ITO)-contacted cells retain ~100% of initial efficiency after five months of stress. SiO x mitigates mechanical aspects of contact stress, retaining 99% of initial efficiency, whereas cells with silicone/cover glass decreased 27%. We further exposed cells to combined illumination, 75 °C heat, and 10 -6 Torr vacuum for 24 h and found that ITO-contacted cells outperformed Au-contacted cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Low-dimensional carbon materials decorated FAPbI 3 for carbon-based perovskite solar cells

Carbon nanomaterials are at the forefront of research in perovskite solar cells (PSCs) due to their exceptional electrical, optical, and stability properties. Their diverse applications include serving as interfacial layers, additives, hole and electron transport materials, and back electrodes. While the influence of various low-dimensional carbon nanomaterial structures on crystallinity, optical and electrical performance, and overall device efficiency has been a topic of interest, it has not been thoroughly explored until now. In this study, we effectively integrated carbon quantum dots (CQDs), multi-walled carbon nanotubes (MWCNTs), and graphene into the FAPbI 3 photoactive layer using a two-step sequential deposition method. Our experiments revealed marked improvements in the photovoltaic performance of PSCs that incorporated all three types of carbon nanomaterials. In particular, the data shows significant enhancements in power conversion efficiency, demonstrating the effectiveness of these materials in optimizing device functionality. Notably, MWCNTs distinguished themselves by exhibiting a remarkable potential for enhancing long-term stability. This finding underscores the importance of selecting the right carbon nanomaterials for future PSC developments, paving the way for more reliable and efficient solar energy solutions. As a result, our research highlights the critical role of carbon nanomaterials in advancing perovskite solar technology.

14 SOLAR ENERGY↗
DOE OSTI2020

Facile healing of cracks in organic–inorganic halide perovskite thin films

Organic-inorganic halide perovskite (OIHP) thin films at the heart of the burgeoning thin-film perovskite solar cells (PSCs) technology possess poor mechanical properties, which is likely to limit the long-term reliability of PSCs as they are poised for commercialization. In an effort to address this issue, in this work we demonstrate that through-thickness cracks induced by bending-tension in thin films of the two prototypical OlHPs, methylammonium lead triiodide (MAPbl(3)) and formamidinium lead triiodide (FAPbl(3)), can be healed easily. This is through the application of either a moderate compressive stress (bending-compression) at room temperature or a simple heat-treatment at modest temperatures. The crack-healing process is found to be time-dependent, which indicates that facile mass-transport in OlHPs plays a key role in this phenomenon. An explanation for this phenomenon is provided, one based on the fundamentals of brittle fracture. This discovery has broad implications for the prevention and/or restoration of the overall performance, environmental stability, and mechanical reliability of PSCs, and other devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Flexible transparent conducting electrodes unexpectedly influence MAPbI 3 film morphology and perovskite solar cell performance

Fabricating perovskite solar cells (PSCs) on plastic substrates will enable cost-effective manufacturing of lightweight and portable energy systems. Here, we study the influence of flexible transparent conductive electrodes (TCEs) on the methylammonium lead iodide (MAPbI3) film morphology and PSC performance. Three types of TCEs on polyethylene terephthalate (PET) are compared: a custom-made AgNWs/indium zinc oxide hybrid TCE and two commercial substrates with indium tin oxide (ITO) or metal/insulator/metal (MIM) as the TCE. Using the same p-i-n architecture and hole transport layer (HTL), we find that PSCs fabricated on the hybrid TCE show better performance and stability compared to those made on commercial TCEs. The PSC performance enhancement is attributed to the superior structural and optical properties of MAPbI3 film deposited on the hybrid TCE, which is explained by the surface energy difference of the HTL. While it is anticipated that solar cell performance can be affected by TCEs’ transmittance and sheet resistance as they determine light absorption and carrier transport, respectively, our finding of TCE influencing the morphology and crystallinity of MAPbI3 film, and hence PSC performance, is unexpected.

14 SOLAR ENERGY↗
DOE OSTI2023

Chemical Design of Organic Interface Modifiers for Highly Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have demonstrated rapid progress in their power conversion efficiencies (PCEs) - from 3.8% in 2009 to 25.7% in 2022 - and they have received considerable attention as a promising future photovoltaic (PV) technology. However, the operational stability of PSCs is still inadequate to satisfy the standards for commercial applications. Interface engineering has become one of the most important strategies to push PSCs' efficiency and stability for practical use. Among the various interface engineering approaches, organic interface modifiers (OIMs) have been frequently used by the PSC field to address the issues limiting PSC stability at high efficiency levels. In this perspective, the chemical structures of state-of-the-art OIMs are discussed, and their characteristics are reviewed, as well as the impact on device performance associated with key device interfaces (e.g., metal oxide/perovskite and organic transport layer/perovskite interfaces) from a chemical and materials engineering point of view is discussed. Finally, design considerations and the authors' perspective are discussed, on the basis of representative literature examples, for building new, customized organic OIMs to further improve PSC efficiency and stability toward commercialization.

14 SOLAR ENERGY↗
DOE OSTI2023

Vapor Phase Infiltration Improves Thermal Stability of Organic Layers in Perovskite Solar Cells

Despite the rapid increase in power conversion efficiency (PCE) of perovskite solar cells (PSCs) over the past decade, stability remains a major roadblock to commercialization. Here, this work shows vapor phase infiltration (VPI) as a tool to create hybrid organic–inorganic layers that improve the stability of organic charge transport layers, such as hole-selective spiro-OMeTAD in PSCs and in other organic electronic devices. Using X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and grazing incident wide-angle X-ray scattering (GIWAXS), we identify that infiltration of TiO x via VPI hinders the crystallization of the spiro-OMeTAD layer by likely preventing the π–π stacking of the molecules. Infiltrated PSCs retained more than 80% of their original efficiency after an operando stability test of 200 h at 75 °C, double the efficiency retained by devices without infiltration, in which the efficiency rapidly decreases in the first 50 h. This work provides a blueprint for using VPI to stabilize organic charge transport layers via prevention of π–π stacking leading to deleterious crystallization that shortens device lifetimes.

14 SOLAR ENERGY↗
DOE OSTI2022

2,3-Diphenylthieno[3,4-b]pyrazines as Hole-Transporting Materials for Stable, High-Performance Perovskite Solar Cells

High-performance and durable perovskite solar cells (PSCs) have advanced rapidly, enabled in part by the development of superior interfacial hole-transporting layers (HTLs). Here, in this study, a new series of 2,3-diphenylthieno[3,4-b]pyrazine (DPTP)-based small molecules containing bis- and tetrakis-triphenyl amino donors (1–3) was synthesized from simple, low-cost, and readily available starting materials. The matched energy levels, ideal surface topographies, high hole mobilities of 8.57 × 10 –4 cm 2 V –1 S –1 , and stable chemical structures of DPTP-4D (3) make it an effective hole-transporting material, delivering a PCE of 20.18% with high environmental, thermal, and light-soaking stability when compared to the reference HTL materials, doped Spiro-OMeTAD and PTAA in PSC n-i-p planar devices. Overall, these DPTP-based molecules are promising HTM candidates for the fabrication of stable PSCs.

14 SOLAR ENERGY↗
DOE OSTI2023

Role of Surface Features on the Initial Dissolution of CH 3 NH 3 PbI 3 Perovskite in Liquid Water: An Ab Initio Molecular Dynamics Study

In this study, the degradation of CH 3 NH 3 PbI 3 (MAPbI 3 ) hybrid organic inorganic perovskite (HOIP) by water has been the major issue hampering its use in commercial perovskites solar cells (PSCs) as MAPbI 3 HOIP have been known to easily degrade in the presence of water molecules. However, even though there have been numerous studies investigating this phenomenon, there is still no consensus on the mechanisms of initial stages of dissolution. Here, we attempt to consolidate differing mechanistic interpretations previously reported in the literature through the use of the first-principles constrained ab-initio molecular dynamics (AIMD) to study the mechanisms, kinetics, and thermodynamics that accompany the degradation of MAPbI 3 HOIP in liquid water. We consider not only the dissolution of the species found on the pristine MAPbI 3 HOIP surfaces, but also the dissolution from defect sites to imitate the successive degradation steps, and propose a sequence of events in the initial phase of MAPbI 3 HOIP dissolution. By comparing the dissolution free energy barrier between surface species of different surficial types, we find that the dominant dissolution mechanisms of surface species varies widely based on the specific surface features adjacent to the dissolving ion. The high sensitivity of dissolution mechanism to surface features has contributed to the many dissolution mechanisms proposed in the literature. In contrast, the dissolution free energy barriers are mainly determined by the dissolving species rather than the type of surfaces, and the type of surfaces the ions are dissolving from are inconsequential toward the dissolution free energy barrier. However, the presence of surface defects such as vacancy sites are found to significantly lower the dissolution free energy barriers. Based on the estimated dissolution free energy barriers from different types of surfaces that we investigated in this study, we proposed that the dissolution of MAPbI 3 HOIP in liquid water originates from surface defect sites that propagate laterally along the surface layer of the MAPbI 3 HOIP crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Roadmap on commercialization of metal halide perovskite photovoltaics

Perovskite solar cells (PSCs) represent one of the most promising emerging photovoltaic technologies due to their high power conversion efficiency. However, despite the huge progress made not only in terms of the efficiency achieved, but also fundamental understanding of the relevant physics of the devices and issues which affect their efficiency and stability, there are still unresolved problems and obstacles on the path toward commercialization of this promising technology. In this roadmap, we aim to provide a concise and up to date summary of outstanding issues and challenges, and the progress made toward addressing these issues. While the format of this article is not meant to be a comprehensive review of the topic, it provides a collection of the viewpoints of the experts in the field, which covers a broad range of topics related to PSC commercialization, including those relevant for manufacturing (scaling up, different types of devices), operation and stability (various factors), and environmental issues (in particular the use of lead). We hope that the article will provide a useful resource for researchers in the field and that it will facilitate discussions and move forward toward addressing the outstanding challenges in this fast-developing field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Correlation of Band Bending and Ionic Losses in 1.68 eV Wide Band Gap Perovskite Solar Cells

Abstract Perovskite solar cells (PSCs) are promising for high‐efficiency tandem applications, but their long‐term stability, particularly due to ion migration, remains a challenge. Despite progress in stabilizing PSCs, they still fall short compared to mature technologies like silicon. This study explores how different piperazinium salt treatments using iodide, chloride, tosylate, and bistriflimide anions affect the energetics, carrier dynamics, and stability of 1.68 eV bandgap PSCs. Chloride‐based treatments achieved the highest power conversion efficiency (21.5%) and open‐circuit voltage (1.28 V), correlating with stronger band bending and n‐type character at the surface. At the same time, they showed reduced long‐term stability due to increased ionic losses. Tosylate‐treated devices offered the best balance, retaining 96.4% efficiency after 1000 h (ISOS‐LC‐1I). These findings suggest that targeted surface treatments can enhance both efficiency and stability in PSCs.

14 SOLAR ENERGY↗
DOE OSTI2021

Intramolecular Electric Field Construction in Metal Phthalocyanine as Dopant‐Free Hole Transporting Material for Stable Perovskite Solar Cells with >21 % Efficiency

Abstract Low conductivity and hole mobility in the pristine metal phthalocyanines greatly limit their application in perovskite solar cells (PSCs) as the hole‐transporting materials (HTMs). Here, we prepare a Ni phthalocyanine (NiPc) decorated by four methoxyethoxy units as HTMs. In NiPc, the two oxygen atoms in peripheral substituent have a modified effect on the dipole direction, while the central Ni atom contributes more electron to phthalocyanine ring, thus efficiently increasing the intramolecular dipole. Calculation analyses reveal the extracted holes within NiPc are mainly concentrated on the phthalocyanine core induced by the intramolecular electric field, and further to be transferred by π‐π stacking space channel between NiPc molecules. Finally, the best efficiency of PSCs with NiPc as dopant‐free HTMs realizes a record value of 21.23 % (certified 21.03 %). The PSCs also exhibit the good moisture, heating and light stabilities. This work provides a novel way to improve the performance of PSCs with free‐doped metal phthalocyanines as HTMs.

Yu, Zefeng↗
DOE OSTI2022

A Mixed PC 61 BM‐CO i 8DFIC Based Electron Transport Material for Inverted High‐performance Perovskite Solar Cells

Abstract This study reports a blend of [6, 6]‐phenyl‐C61‐butyric acid methyl ester (PC 61 BM) and CO i 8DFIC non‐fullerene acceptor (NFA) as an electron transport layer (ETL) in perovskite solar cells (PSCs). This mixed small‐molecule ETL showed good inter‐molecule mixing, reduced intermolecular distances and decent morphology, resulting in excellent charge carrier transport properties. Morever, charge carrier extraction and transport at the perovskite/ETL interface was optimized by reducing surface traps and defects due to the passivation ability of various terminal groups from the CO i 8DFIC molecule. A high power conversion efficiency (PCE) of 19.12 % was achieved by taking advantage of benefits from both molecules, showing much better performance than the invidual PC 61 BM or CO i 8DFIC (7.13% for using the NFA only). Moreover, the storage and ambient stabilities of the mixed ETL‐based PSCs increased dramatically compared to control devices.

Chemistry↗
DOE OSTI2025

Bilayer Electron Transport Layers for High–Performance Rigid and Flexible Perovskite Solar Cells

While great progress is being made in achieving high power conversion efficiency (PCE), durability, and reliability in rigid and flexible n–i–p perovskite solar cells (PSCs), there is still room for improvement. Among myriad ways this can be achieved, one way is to improve the processing and quality of electron transport layers (ETLs) used in PSCs. To that end, here we explore the use of SnO 2 /TiO 2 bilayer ETLs in both rigid and flexible PSCs. In the case of rigid PSCs, chemical bath deposition (CBD) is used where the bilayer architecture affords the CBD of high-quality ETL, which results in PSCs with up to 25.13% PCE and operational stability T 80 (80% of initial PCE retained) of 2220 h under 1-sun continuous illumination with maximum power-point tracking. In the case of flexible PSCs, once again, the bilayer architecture allows us to fabricate high-quality ETL using spin coating, which results in PSCs with up to 22.54% PCE and excellent mechanical durability, withstanding 20 000 bending cycles with ≈92% of the initial PCE retained. Mechanisms underlying the enhanced performance and stability/durability of rigid and flexible PSCs that use SnO 2 /TiO 2 bilayer ETLs are elucidated. Furthermore, this approach could be extended to other ETL systems for PSCs for further improvements in PCE, durability, and reliability.

14 SOLAR ENERGY↗