Results for “PSe” — Page 9

NASA NTRS2022

Transition Analysis for the CRM-NLF Wind Tunnel Configuration using Transport Equation Models and Linear Stability Correlations

Transition models based on auxiliary transport equations augmenting the Reynolds-averaged Navier-Stokes (RANS) framework rely upon transition correlations that were derived from a limited number of low-speed experiments. Furthermore, these models often account for only a subset of the relevant transition mechanisms and/or cannot accurately predict the sensitivity of those mechanisms to the changes in significant flow parameters. A preceding investigation had targeted the assessment of the transport-equation-based transition models in NASA's OVERFLOW 2.3b solver, namely, the amplification factor transport (AFT-2017b) equation model coupled with the Spalart-Allmaras RANS model and the Langtry-Menter transition models (LM2009 without crossflow effects and LM2015 including the modeling of crossflow transition) implemented with Menter’s shear-stress transport equation (SST2003) RANS model. Comparisons with recent measurements at transonic freestream conditions on the Common Research Model with Natural Laminar Flow (CRM-NLF) reinforced our earlier finding that all three of the above models significantly underpredict the reported extent of the laminar flow region over the entire span of the wing, regardless of the dominant instability mechanism(s) underlying the onset of the transition process. The underprediction of the laminar flow extent was attributed to the failure of the above models in accounting for the stabilizing effect of compressibility on the amplification of Tollmien-Schlichting instabilities. Based on previous linear stability studies related to compressibility effects, the present work proposes modifications to the two classes of transition models that reduce to the original form of each model at low subsonic speeds and do not require any nonlocal flow information or additional transport equation(s). The modifications are shown to significantly improve the predicted laminar extent of the flow and compare well against the data from the CRM-NLF experiment. Additionally, a previous assessment of transition prediction based on the dual, nonparallel N -factor method in conjunction with linear parabolized stability equations (PSE) is extended to additional angles of attack to provide the first comprehensive assessment of transition models based on nonparallel disturbance amplification over the CRM-NLF. In general, the transition criterion based on the dual, nonparallel N-factor method with N TS = N CF = 6 is reasonably successful at correlating with the measured transition fronts at R eMAC = 15 million for all angles of attack investigated herein and provides additional validation of the improved predictions from the compressibility-corrected transition models.

CFD modeling↗

NASA NTRS2022

The Harmonic Linearized Navier-Stokes Equations for Transition Prediction in Three-Dimensional Flows

The conventional method to predict the onset of laminar-turbulent transition in convectively unstable boundary-layer flows is based on the logarithmic amplification ratio, the so-called N-factor, of the linear instability waves. To calculate the N-factor, the flow variables are decomposed into a laminar basic state solution and the linear disturbances, which are assumed to be harmonic in time. The most commonly used linear stability analysis approaches include the locally parallel linear stability theory (LST) and the nonlocal, weakly nonparallel parabolized stability equations (PSE). However, these methods do not account for strong streamwise gradients that are encountered in several configurations of interest, such as those in the vicinity of roughness elements, steps, gaps, or corners. To compute the linear evolution of disturbances along such strongly nonparallel regions, the harmonic linearized Navier-Stokes equations (HLNSE) need to be solved. The discretization of the HLNSE for spanwise/azimuthally inhomogeneous laminar basic states yields a linear system of complex arithmetic with a leading dimension of the order of 10^(7) to 10^(8) even in relatively simple flows. A combined multithread and multiprocessor algorithm is implemented for the direct solution of such linear systems. Results for a supersonic boundary layer over a three-dimensional roughness patch show good agreement with experimental measurements when the evolution of the instability waves over the roughness patch is included via the HLNSE. Additionally, inflow-resolvent analysis based on the HLNSE for discrete-roughness-induced disturbances in the nose tip of a blunt cone at Mach 6 demonstrates the importance of including the disturbance amplification along the near vicinity of the roughness element and separation region.

Boundary Layer Stability↗

NASA NTRS2022

The Harmonic Linearized Navier-Stokes Equations for Transition Prediction in Three-Dimensional Flows

The conventional method to predict the onset of laminar-turbulent transition in convectively unstable boundary-layer flows is based on the logarithmic amplification ratio, the so-called N-factor, of the linear instability waves. To calculate the N-factor, the flow variables are decomposed into a laminar basic state solution and the linear disturbances, which are assumed to be harmonic in time. The most commonly used linear stability analysis approaches include the locally parallel linear stability theory (LST) and the non-local, weakly nonparallel parabolized stability equations (PSE). However, these methods do not account for strong streamwise gradients that are encountered in several configurations of interest, as roughness elements, steps, gaps, or corners. To solve the linear evolution of disturbances along such strongly nonparallel regions, the harmonic linearized Navier-Stokes equations (HLNSE) need to be solved. The discretization of the HLNSE for spanwise/azimuthally inhomogeneous laminar basic states yields a linear system of complex arithmetic with a leading dimension of the order of 107 to 108. A combined multithread and multiprocessor algorithm is implemented for the direct solution of such linear system. Results for a supersonic boundary layer over a three-dimensional roughness patch show good agreement with experimental measurements when the evolution of the instability waves over the roughness patch is included via the HLNSE.

Boundary Layer Stability↗

NASA NTRSDate not supplied

MUSTANG: A Workhorse for NASA Spaceflight Avionics

The Modular Unified Space Technology Avionics for Next Generation (MUSTANG) is a small integrated Avionics system including Command and Data Handling (C&DH), Power System Electronics (PSE), Attitude Control System Interfaces (ACS), and Propulsion Electronics. The MUSTANG Avionics Architecture is built upon many years of knowledge capture and lessons learned at the Goddard Space Flight Center. With a motivation towards modularity and keeping board redesign costs to a minimum, MUSTANG offers flexibility in features with a backplane-less design and allows the user to choose the options (cards) needed for their system. It incorporates a distributed power system that provides secondary power to all its subcomponents reducing the number of primary services needed for an Avionics. MUSTANG can be integrated into one system or divided into several smaller components. MUSTANG supports redundancy and cross-strap ability for a more robust and reliable Avionics system. A variation of MUSTANG exists for Instrument Electronics called iMUSTANG and allows the user to select functionality applicable to the instrument electronics. MUSTANG is not meant to replace Avionics for all spacecraft. There are limitations due to its relatively compact size, but the MUSTANG design has proven broadly applicable on many spacecraft and instrument bus avionics architectures.

MUSTANG↗

NASA NTRSDate not supplied

Transition Modeling Based on the Dual N-factor Method for the CRM-NLF Wind Tunnel Configuration

The dual N-factor method is used to model the boundary-layer transition over the common research model with natural laminar flow (CRM-NLF) aircraft configuration. The flow conditions match selected test conditions from a wind tunnel experiment in the National Transonic Facility at the NASA Langley Research Center. The paper presents a systematic methodology for transition prediction in the presence of a dual shock system and extends the prior capability for iteratively coupled computational fluid dynamics (CFD) predictions to incorporate three-dimensional, transonic wings. The method employs stability computations based on the linear parabolized stability equations (PSE), along with a dual N-factor criterion. The iterative process begins with the fully turbulent Reynolds-averaged-Navier-Stokes (RANS) mean flow solution. For the first iteration, a mean flow solution is calculated with an imposed transition front that aligns with the shock front from the fully turbulent solution. Subsequently, stability computations are performed along a set of streamlines across the wing to calculate the amplification of planar Tollmien-Schlichting (TS) and stationary crossflow (CF) modes. The transition criterion based on the dual N-factor method is used to infer the updated transition front and the process is successively repeated until convergence of the solution. Within three iterations, the predicted fronts for angles of attack of 1.45, 1.98, 2.46 and 2.94 degrees and a mean-aerodynamic-chord Reynolds number equal to 15 million, approach visual convergence in most regions of the studied cases, and the resulting predictions are in good agreement with the transition fronts deduced from measurements of temperature-sensitive paint. Even though surface pressure measurements based on fully-turbulent flow agree well with the measured pressure coefficient distributions, strong viscous-inviscid interaction effects cause significant shifts in the shock locations based on the imposed transition front, underscoring the intrusive nature of static pressure measurements using surface mounted ports on the CRM-NLF configuration.

Boundary Layer Transition↗

NASA NTRSDate not supplied

Effects of Random Micron-Sized Roughness on Swept-Wing Transition

This study examines the effect of random micron-sized distributed roughness on stationary crossflow instabilities. The roughness parameters are varied by creating nanoparticle coatings of various formulations and applying them to inserts that cover approximately the first 14% of the model. In addition to the baseline configuration (no added roughness, root-mean-square (RMS) ≈ 0.42 𝜇m), panels with RMS roughness values of 4.8 and 8.6 𝜇m were tested, with correlation lengths of 1029 and 385 𝜇m, respectively. Despite the significant roughness levels tested, the transition location was found to be only mildly impacted by the additional roughness, and the roughness panel with lower RMS amplitude caused a larger upstream movement of transition, on average. However, the stationary crossflow amplitudes and wavelength content were found to vary substantially depending on the roughness input. In particular, the panel with higher RMS roughness amplitude resulted in significantly larger amplitudes in the 7.5-9 mm wavelength range at the farthest upstream measurement station, while the lower roughness panel resulted in mildly larger amplitudes at 10 mm and wavelengths larger than 15 mm. Nonlinear Parabolized Stability Equations (PSE) computations were performed to attempt to estimate the initial amplitudes of the stationary crossflow instabilities. Wavelength spectra were matched at the most upstream measurement location, but large discrepancies exist between the predicted and measured growth behavior farther downstream, thus, more work is required to improve confidence in initial amplitude estimates.

boundary-layer transition↗

NASA NTRSDate not supplied

Effects of Random Micron-Sized Roughness on Swept-Wing Transition

This study examines the effect of random micron-sized distributed roughness on stationary crossflow instabilities. The roughness parameters are varied by creating nanoparticle coatings of various formulations and applying them to inserts that cover approximately the first 14% of the model. In addition to the baseline configuration (no added roughness, root-mean-square (RMS) ≈ 0.42 𝜇m), panels with RMS roughness values of 4.8 and 8.6 𝜇m were tested, with correlation lengths of 1029 and 385 𝜇m, respectively. Despite the significant roughness levels tested, the transition location was found to be only mildly impacted by the additional roughness, and the roughness panel with lower RMS amplitude caused a larger upstream movement of transition, on average. However, the stationary crossflow amplitudes and wavelength content were found to vary substantially depending on the roughness input. In particular, the panel with higher RMS roughness amplitude resulted in significantly larger amplitudes in the 7.5-9 mm wavelength range at the farthest upstream measurement station, while the lower roughness panel resulted in mildly larger amplitudes at 10 mm and wavelengths larger than 15 mm. Nonlinear Parabolized Stability Equations (PSE) computations were performed to attempt to estimate the initial amplitudes of the stationary crossflow instabilities. Wavelength spectra were matched at the most upstream measurement location, but large discrepancies exist between the predicted and measured growth behavior farther downstream, thus, more work is required to improve confidence in initial amplitude estimates.

boundary-layer transition↗

NASA NTRSDate not supplied

Effects of Random Micron-Sized Roughness on Swept-Wing Transition

This study examines the effect of random micron-sized distributed roughness on stationary crossflow instabilities. The roughness parameters are varied by creating nanoparticle coatings of various formulations and applying them to inserts that cover approximately the first 14% of the model. In addition to the baseline configuration (no added roughness, root-mean-square (RMS) ≈ 0.42 𝜇m), panels with RMS roughness values of 4.8 and 8.6 𝜇m were tested, with correlation lengths of 1029 and 385 𝜇m, respectively. Despite the significant roughness levels tested, the transition location was found to be only mildly impacted by the additional roughness, and the roughness panel with lower RMS amplitude caused a larger upstream movement of transition, on average. However, the stationary crossflow amplitudes and wavelength content were found to vary substantially depending on the roughness input. In particular, the panel with higher RMS roughness amplitude resulted in significantly larger amplitudes in the 7.5-9 mm wavelength range at the farthest upstream measurement station, while the lower roughness panel resulted in mildly larger amplitudes at 10 mm and wavelengths larger than 15 mm. Nonlinear Parabolized Stability Equations (PSE) computations were performed to attempt to estimate the initial amplitudes of the stationary crossflow instabilities. Wavelength spectra were matched at the most upstream measurement location, but large discrepancies exist between the predicted and measured growth behavior farther downstream, thus, more work is required to improve confidence in initial amplitude estimates.

boundary-layer transition↗

DOE OSTI2021

Machine Learning Tools Set for Natural Gas Fuel Cell System Design

This study is focusing on leveraging the system design tools set for the next-generation solid oxide fuel cell (SOFC) based natural gas fuel cell (NGFC) system. Conventionally, system design and optimization of NGFC systems rely heavily on traditional reduced order model (ROM) techniques and designers’ experience level. For overcoming the technical barriers of system design, multiple multi-physics models and machine learning (ML) tools have been utilized to automate the conceptual design process and enhance the reliability of solutions for the NGFC system. The proposed tools set includes a physics-informed ML tool for automated ROM construction that leverages advances in deep neural networks to significantly reduce ROM prediction error for the NGFC power island compared to traditional approaches. The constructed physics-informed ML ROM can be used in system design, and optimization tools set Institute for the Design of Advanced Energy Systems (IDAES) Process Systems Engineering (PSE) framework. The tools set also provides a user-friendly graphic user interface built within Jupyter Notebooks, and the complete tools set is open-source public available.

Wang, Dewei↗

DOE OSTI2022

Dynamic Simulation and Optimization of a Subcritical Coal-Fired Power Plant During Load-Ramping Operations

Paper for presentation at The 14th International Symposium on Process Systems Engineering (PSE 2021+), Kyoto, Japan, June 19-23, (2022).

Ma, Jinliang N.↗

DOE OSTI2025

Kinetic Modeling of Secondary Organic Aerosol in a Weather-Chemistry Model: Parameterizations, Processes, and Predictions for GOAmazon

Secondary organic aerosol (SOA) forms and evolves in the atmosphere through many pathways and processes, over diverse spatial and time scales. Hence, there is a need to represent these widely-varying kinetic processes in large-scale atmospheric models to allow for accurate predictions of the abundance, properties, and impacts of SOA. In this work, we integrated a kinetic, process-level model (simpleSOM-MOSAIC) into a weather-chemistry model (WRF-Chem) to simulate the oxidation chemistry and microphysics of atmospheric SOA. simpleSOM-MOSAIC simulates multigenerational gas-phase chemistry, autoxidation reactions, heterogeneous oxidation, oligomerization, and phase-state-influenced gas/particle partitioning of SOA. As a case study, the integrated WRF-Chem-simpleSOM-MOSAIC (WC-SSM) model was used to simulate the photochemical evolution downwind of a large city (Manaus, Brazil) in the Amazon and, in turn, study the anthropogenic and biogenic interactions in an otherwise pristine environment. Consistent with previous work, we found that OA was enhanced by up to a factor of four in the urban plume due to elevated hydroxyl radical (OH) concentrations, relative to the background, and that this OA was dominated by SOA from biogenic precursors (80%). Further, in addition to accurately simulating the OA enhancement in the urban plume, the model reproduced the magnitude of the OA oxygen-to-carbon (O:C) ratio and broadly tracked the evolution of the aerosol size distribution. Our work highlights the importance of including an integrated, kinetic representation of SOA processes in an atmospheric model

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

High average-flux laser-driven neutron source

Laser-driven neutron generation is an attractive alternative to more established methods for compact, short-pulse-duration neutron sources with applications in medical science, material science and imaging. Despite extensive investigation of various techniques, achieving performance comparable to nuclear reactors or conventional accelerators remains challenging. In this work, we generate a stable, high-repetition-rate laser-driven neutron source reaching a record average flux of 7.8 × 10 7 n/sr/s, improving on other existing laser-based sources by more than one order of magnitude. Our approach is based on a two-step process where electrons are accelerated to relativistic energies via laser wakefield acceleration (LWFA), and subsequently generate neutrons through Bremsstrahlung emission followed by photonuclear reactions in a tungsten converter. Experimental results, supported by Monte Carlo simulations, show a neutron flux of 3.0 × 10 7 n/cm 2 /s near the target, on par with some compact accelerator-based neutron sources. Additionally, a direct comparison with the target-normal sheath acceleration (TNSA) pitcher-catcher scheme, performed on the same laser system, reveals a significantly higher total neutron yield of 3.9 × 10 8 neutrons per shot, outperforming the TNSA scheme by several orders of magnitude. These findings represent a significant advancement towards the development of practical laser-driven neutron sources and highlight the advantages of LWFA-based neutron generation for future applications.

Vallières, Simon [Institut National de la Recherch↗

DOE OSTI2024

PARETO UI 24.01.24 (0.9.0) Release

This is a standalone release of PARETO UI using the previously released PARETO version 0.9.0 for the backend.. New features in this version of PARETO UI are: - Added functionality to upload GIS map network visualizations and auto generate input templates - Added map visualizations based on GIS data