Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLARIZABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Aqueous solvation of the chloride ion revisited with density functional theory: impact of correlation and exchange approximations

The specificity of aqueous halide solvation is fundamental to a wide range of bulk and interfacial phenomena spanning from biology to materials science. Halide polarizability is thought to drive the ion specificity, and if so, it is essential to have an accurate description of the electronic properties of halide ions in water. To this end, the solvation of the chloride anion, Cl - has been reinvestigated with state-of-the-art density functional theory. Specifically, the PBE-D3, PBE0-D3, and SCAN functionals have been employed to probe the impact of correlation and exchange approximations. Anticipating the findings, adding exact exchange improves the electronic structure, but simultaneously significantly reduces the Cl - polarizability, resulting in an over-structured Cl–O radial distribution function (RDF) and longer water H-bond lifetimes to Cl - . SCAN does not yield as much improvement in the energetics of Cl - relative to bulk water, but does result in a smaller reduction of the polarizability and thus a less structured Cl–O RDF, which agrees better with experiment. Special consideration is therefore warranted in assessing the impact of exchange on the energy, charge density, and the charge density response when designing and testing hybrid functionals for aqueous halide solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Refractive index of lithium fluoride at high dynamic stresses

Alkali halides are prototypical ionic solids whose refractive index is a fundamental property related to their lattice structure and ionic polarizability. In particular, lithium fluoride (LiF) has the largest band gap of any known transparent material and maintains transparency at high pressures, making it well suited for use as an optical window in dynamic compression experiments. While empirical fits to the measured density dependence of the refractive index have been provided, a model that is valid over the entire pressure range of experiments and based on a polarization-based theoretical description is lacking. We present a refractive index model for dynamically compressed LiF based on the Lorentz-Lorenz equation, where the molecular polarizability is determined using a single oscillator model with a strain polarizability parameter Λ=0.73. Here, we show that our modeling approach provides an excellent match to the LiF refractive index data for both shock and ramp compression experiments to 900 GPa (density compression greater than threefold). Additionally, updated fits are provided to determine the refractive index correction for LiF windows used in dynamic compression experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Electric and magnetic dipole strength in 112,114,116,118,120,124 Sn

Background: There is renewed interest in electric dipole strength distributions for a variety of reasons including the extraction of the dipole polarizability related to properties of the symmetry energy and a measure for the neutron skin thickness, understanding the structure of low-energy $\textit{E}$1 strength in nuclei with neutron excess, and establishing the systematics of the isovector giant dipole resonance (IVGDR). Inelastic proton scattering at energies of a few hundred MeV and very forward angles including 0° has been established as a tool for the study of electric and magnetic dipole strength distributions in nuclei. Purpose: The present work aims at a systematic investigation of the electric and magnetic dipole strength distributions in the chain of stable even-mass tin isotopes. Methods: Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295-MeV beam covering laboratory angles 0°–6° and excitation energies 6–22 MeV. Cross sections due to $\textit{E}$1 and $\textit{M}$1 excitations were extracted with a multipole decomposition analysis (MDA) and then converted to reduced transition probabilities with the “virtual photon method” for $\textit{E}$1 and the “unit cross section method” for $\textit{M}$1 excitations, respectively. Including a theory-aided correction for the high-excitation-energy region not covered experimentally, the electric dipole polarizability was determined from the $\textit{E}$1 strength distributions. Results: In this work, total photoabsorption cross sections derived from the $\textit{E}$1 and $\textit{M}$1 strength distributions show significant differences compared to those from previous ($\textit{γ, xn}$) experiments in the energy region of the IVGDR. The widths of the IVGDR deduced from the present data with a Lorentz parametrization show an approximately constant value of about 4.5 MeV in contrast to the large variations between isotopes observed in previous work. The IVGDR centroid energies are in good correspondence to expectations from empirical systematics of their mass dependence. Furthermore, a study of the dependence of the IVGDR energies on bulk matter properties is presented. The $\textit{E}$1 strengths below neutron threshold show fair agreement in this work with results from ($\textit{γ, γ'}$) experiments on 112,116,120,124 Sn in the energy region between 6 and 7 MeV, where also isoscalar $\textit{E}$1 strength was found for 124 Sn. At higher excitation energies, large differences are observed, pointing to a different nature of the excited states with small ground-state branching ratios. The isovector spin-$\textit{M}$1 strengths exhibit a broad distribution between 6 and 12 MeV in all studied nuclei. Conclusions: The present results contribute to the solution of a variety of nuclear structure problems including the systematics of the energy and width of the IVGDR, the structure of low-energy $\textit{E}$1 strength in nuclei, new constraints to energy density functionals (EDFs) aiming at a systematic description of the dipole polarizability across the nuclear chart, from which properties of the symmetry energy can be derived, and the systematics of the isovector spin-$\textit{M}$1 strength in heavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Electromagnetic observables of open-shell nuclei from coupled-cluster theory

Here we develop a new method to describe electromagnetic observables of open-shell nuclei with two nucleons outside a closed shell. This approach combines the equation-of-motion coupled-cluster method for such systems and the Lorentz integral transform technique, expanding the applicability of coupled-cluster theory for electromagnetic observables beyond closed-(sub)shell nuclei. To validate this new approach, we compute the non-energy-weighted dipole sum rule and the dipole polarizability of 16,24 ⁢O in both the closed-(sub)shell and the new equation-of-motion coupled-cluster frameworks, finding agreement within error bars. We then analyze the evolution of the dipole polarizability along the oxygen and calcium isotopic chains. Our predictions agree well with available experimental data and other available theoretical calculations for the closed-(sub)shell 16,22 ⁢O and the open-shell 18 O. In the calcium isotopes, we observe that our dipole polarizability predictions for open-shell nuclei are lower than those of closed-(sub)shell nuclei. We expect that our predictions for 24 O and 54,56 ⁢Ca will motivate future experimental studies at the drip line.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Constraints on Nuclear Symmetry Energy Parameters

A review is made of constraints on the nuclear symmetry energy parameters arising from nuclear binding energy measurements, theoretical chiral effective field predictions of neutron matter properties, the unitary gas conjecture, and measurements of neutron skin thicknesses and dipole polarizabilities. While most studies have been confined to the parameters 𝑆 𝑉 and L, the important roles played by, and constraints on 𝐾 sym , or, equivalently, the neutron matter incompressibility 𝐾 𝑁 , are discussed. Strong correlations among 𝑆 𝑉 ,𝐿, and 𝐾 𝑁 are found from both nuclear binding energies and neutron matter theory. However, these correlations somewhat differ in the two cases, and those from neutron matter theory have smaller uncertainties. To 68% confidence, it is found from neutron matter theory that 𝑆 𝑉 = 32.0 ± 1.1 MeV, 𝐿 = 51.9 ± 7.9 MeV and 𝐾 𝑁 = 152.2 ± 38.1 MeV. Theoretical predictions for neutron skin thickness and dipole polarizability measurements of the neutron-rich nuclei 48 Ca, 120 Sn, and 208 Pb are compared to recent experimental measurements, most notably the CREX and PREX neutron skin experiments from Jefferson Laboratory. By themselves, PREX I+II measurements of 208 Pb and CREX measurement of 48 Ca suggest 𝐿 = 121 ± 47 MeV and 𝐿 = −5 ± 40 MeV, respectively, to 68% confidence. However, we show that nuclear interactions optimally satisfying both measurements imply 𝐿 = 53 ± 13 MeV, nearly the range suggested by either nuclear mass measurements or neutron matter theory, and is also consistent with nuclear dipole polarizability measurements. This small parameter range implies 𝑅 1.4 = 11.6 ± 1.0 km and Λ 1.4 = 228$^{+148}_{−90}$, which are consistent with NICER X-ray and LIGO/Virgo gravitational wave observations of neutron stars.

neutron skins↗
NASA NTRS1982

Theory of metal atom-water interactions and alkali halide dimers

Theoretical studies of the interactions of metal atoms with water and some of its isoelectronic analogs, and of the properties of alkali halides and their aggregates are discussed. Results are presented of ab initio calculations of the heats of reaction of the metal-water adducts and hydroxyhydrides of Li, Be, B, Na, Mg, and Al, and of the bond lengths and angles an; the heats of reaction for the insertion of Al into HF, H2O, NH3, H2S and CH3OH, and Be and Mg into H2O. Calculations of the electron affinities and dipole moments and polarizabilities of selected gas phase alkali halide monomers and dimers are discussed, with particular attention given to results of calculations of the polarizability of LiF taking into account electron correlation effects, and the polarizability of the dimer (LiF)2.

Jordan, K. D.↗
NASA NTRS1991

Light scattering by nonspherical particles - A refinement to the coupled-dipole method

In the coupled-dipole method, an arbitrary particle is modeled as an array of N polarizable subunits, each of which gives rise to only electric dipole radiation. The Clausius-Mosotti relation is widely used to calculate the polarizability of the subunits that correspond to the dielectric function of the particle that the array represents. The Clausius-Mosotti relation is replaced here with an exact expression for the electric dipole polarizability, and improvement is found in extinction calculations for spheres as compared with Mie theory. Near a Froehlich frequency the coupled-dipole method yields extinction cross sections for spheres and spheroids that compare favorably with the continuous distribution of ellipsoids method and measured values.

Dungey, Clifton E.↗
DOE OSTI2022

Towards sharp error analysis of extended Lagrangian molecular dynamics

The extended Lagrangian molecular dynamics (XLMD) method provides a useful framework for reducing the computational cost of a class of molecular dynamics simulations with constrained latent variables. The XLMD method relaxes the constraints by introducing a fictitious mass ε for the latent variables and solving a set of singularly perturbed ordinary differential equations. While favorable numerical performance of XLMD has been demonstrated in several different contexts in the past decade, mathematical analysis of the method remains scarce. Here, we propose the first error analysis of the XLMD method in the context of a classical polarizable force field model. While the dynamics with respect to the atomic degrees of freedom are general and nonlinear, the key mathematical simplification of the polarizable force field model is that the constraints on the latent variables are given by a linear system of equations. We prove that when the initial value of the latent variables is compatible in a sense that we define, XLMD converges as the fictitious mass ε is made small with $\mathscr{O}$(ε) error for the atomic degrees of freedom and with $\mathscr{O}$($\sqrt{ε}$) error for the latent variables, when the dimension of the latent variable d' is 1. Furthermore, when the initial value of the latent variables is improved to be optimally compatible in a certain sense, we prove that the convergence rate can be improved to $\mathscr{O}$(ε) for the latent variables as well. Numerical results verify that both estimates are sharp not only for d'=1, but also for arbitrary d'. In the setting of general d', we do obtain convergence, but with the non-sharp rate of $\mathscr{O}$($\sqrt{ε}$) for both the atomic and latent variables.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Static Subspace Approximation for Random Phase Approximation Correlation Energies: Applications to Materials for Catalysis and Electrochemistry

Modeling complex materials using high-fidelity, ab initio methods at low cost is a fundamental goal for quantum chemical software packages. The GW approximation and random phase approximation (RPA) provide a unified description of both electronic structure and total energies using the same physics in a many-body perturbative approach that can be more accurate than generalized-gradient density functional theory (DFT) methods. However, GW/RPA implementations have historically been limited to either specific materials classes or application toward small chemical systems. Here, the static subspace approximation allows for reduced cost full-frequency GW/RPA calculations and has previously been benchmarked thoroughly for GW calculations. Here, we describe our approach to including partial occupations of electronic orbitals in full-frequency GW and RPA calculations for the study of electrocatalysts. We benchmarked RPA total energy calculations using the subspace approximation across a diverse test suite of materials for a variety of computational parameters. The benchmarking quantifies the impact of different extrapolation procedures for representing the static polarizability at infinite screened cutoff, and shows that using screened cutoffs above 20-25 Ryd result in diminishing accuracy returns for predicting RPA total energies. Additionally, for moderately sized electrocatalytic models, 2-3 times fewer computational resources are used to compute RPA total energies by representing the static polarizability with 20-30% of the static subspace basis, with an error of approximately 0.01 eV or better in RPA adsorption energy calculations. Finally, we show that for these electrochemical models RPA can shift DFT adsorption energy shifts by up to 0.5 eV and that GW can frequently shift DFT eigenvalues of surface and adsorbate states by approximately 0.5-1 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

DFT-Based Calculation of Molecular Hyperpolarizability and SFG Intensity of Symmetric and Asymmetric Stretch Modes of Alkyl Groups

Vibrational sum frequency generation (SFG) spectroscopy has been extensively used for obtaining structural information of molecular functional groups at two-dimensional (2D) interfaces buried in the gas or liquid medium. Although the SFG experiment can be done elegantly, interpreting the measured intensity in terms of molecular orientation with respect to the lab coordinate is quite complicated. One of the main reasons is the difficulty of determining the hyperpolarizability tensors of even simple molecules that govern their SFG responses. The single-bond polarizability derivative (SBPD) model has been proposed to estimate the relative magnitude of SFG-active hyperpolarizability by assuming that the perturbation associated to each vibration is negligible. In this study, density functional theory (DFT) was used to calculate the polarizability and dipole derivative tensors of the CH 3 stretch mode of CH 3 I, CH 3 CH 2 I, CH 3 OH, CH 3 CH 2 OH. Then, the hyperpolarizability tensors of symmetric and asymmetric vibration modes were calculated considering the Boltzmann distribution of representative conformers, which allowed theoretical calculation of their SFG intensities at all polarization combinations as a function of the tilt angle of the CH 3 group with respect to the surface normal direction. Then the ratios of the calculated SFG intensities for the CH 3 peaks used in experimental studies for the CH 3 tilt angle determination were compared. This comparison clearly showed the effect of vibrational coupling among neighboring functional groups. As a result, this study presents new parameters that can be used in determining the average tilt angle of the CH 3 group at the 2D interface with SFG measurements as well as limitations of the method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Meta-Generalized Gradient Approximation for the Cavity-Dependent Exchange-Correlation Interaction in Strongly Coupled Light–Matter Systems

Strong light–matter coupling in optical cavities enables the manipulation of chemical and physical properties without altering molecular composition. Theoretical modeling of such phenomena requires exchange-correlation (XC) functionals that account for both electron–electron and electron–photon (ep) interactions within quantum electrodynamical density functional theory (QEDFT). In this work, we develop a meta-generalized gradient approximation (meta-GGA) specifically targeting the cavity-dependent XC interaction in strongly coupled light–matter systems. This novel approximation is built upon a new semilocal polarizability approximation, which draws from the jellium-with-a-gap model, and can be extended to a “global hybrid” variant that goes beyond the isotropic model from previous approximations. The polarizability model yields significantly improved dispersion coefficients and benchmark calculations with the cavity-dependent XC functional demonstrate improved agreement with QED Hartree–Fock (QED-HF) reference energies. Application to the regioselectivity of brominated nitrobenzene intermediates reveals the functional’s capacity to capture cavity-induced energetic shifts. In conclusion, our results advance the Jacob’s ladder of functionals for QEDFT and provide a practical tool for modeling polaritonic chemistry.

Approximation↗
DOE OSTI2020

Molecular simulation of liquid–vapor coexistence for NaCl: Full-charge vs scaled-charge interaction models

Scaled-charge models have been recently introduced for molecular simulations of electrolyte solutions and molten salts to attempt to implicitly represent polarizability. Although these models have been found to accurately predict electrolyte solution dynamic properties, they have not been tested for coexistence properties, such as the vapor pressure of the melt. In this work, we evaluate the vapor pressure of a scaled-charge sodium chloride (NaCl) force field and compare the results against experiments and a non-polarizable full-charge force field. The scaled-charge force field predicts a higher vapor pressure than found in experiments, due to its overprediction of the liquid-phase chemical potential. Reanalyzing the trajectories generated from the scaled-charge model with full charges improves the estimation of the liquid-phase chemical potential but not the vapor pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Time propagation of electronic wavefunctions using nonorthogonal determinant expansions

The use of truncated configuration interaction in real-time time-dependent simulations of electron dynamics provides a balance of computational cost and accuracy, while avoiding some of the failures associated with real-time time-dependent density functional theory. However, low-order truncated configuration interaction also has limitations, such as overestimation of polarizability in configuration interaction singles, even when perturbative doubles are included. Increasing the size of the determinant expansion may not be computationally feasible, and so, in this work, we investigate the use of nonorthogonality in the determinant expansion to establish the extent to which higher-order substitutions can be recovered, providing an improved description of electron dynamics. Model systems are investigated to quantify the extent to which different methods accurately reproduce the (hyper)polarizability, including the high-harmonic generation spectrum of H 2 , water, and butadiene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Non-resonant Raman optical activity from phase-space electronic structure theory

In order to model experimental non-resonant Raman optical activity, chemists must compute a host of second-order response tensors (e.g., the electric-dipole–magnetic-dipole polarizability) and their nuclear derivatives along a set of vibrational modes. While these response functions are almost always computed within a Born–Oppenheimer (BO) framework, here we provide a natural interpretation of the electric-dipole–magnetic-dipole polarizability within phase space electronic structure theory, a beyond-BO model whereby the electronic structure depends on nuclear momentum (P) in addition to nuclear position (R). By coupling to nuclear momentum, phase space electronic structure theory is able to capture the asymmetric response of the electronic properties to an external field, in so far as for a vibrating (non-stationary) molecule, $\frac{∂μ}{∂B}$≠$\frac{∂m}{∂F}$, where μ and m are the electrical linear and magnetic dipoles, and F and B are electric and magnetic fields. As an example, for a prototypical methyloxirane molecule, we show that phase space electronic structure theory is able to deliver a reasonably good match with experimental results in a manner that is formally invariant to gauge origin G 0 —provided that one uses a complete basis or, alternatively, gauge invariant atomic orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

VeloxChem: A Python-driven density-functional theory program for spectroscopy simulations in high-performance computing environments

An open-source program named VeloxChem has been developed for the calculation of electronic real and complex linear response functions at the levels of Hartree–Fock and Kohn–Sham density functional theories. With an object-oriented program structure written in a Python/C++ layered fashion, VeloxChem enables time-efficient prototyping of novel scientific approaches without sacrificing computational efficiency, so that molecular systems involving up to and beyond 500 second-row atoms (or some 10,000 contracted and in part diffuse Gaussian basis functions) can be routinely addressed. In addition, VeloxChem is equipped with a polarizable embedding scheme for the treatment of the classical electrostatic interactions with an environment that in turn is modeled by atomic site charges and polarizabilities. The underlying hybrid message passing interface (MPI)/open multiprocessing (OpenMP) parallelization scheme makes VeloxChem suitable for execution in high-performance computing cluster environments, showing even slightly beyond linear scaling for the Fock matrix construction with use of up to 16,384 central processing unit (CPU) cores. An efficient—with respect to convergence rate and overall computational cost—multifrequency/gradient complex linear response equation solver enables calculations not only of conventional spectra, such as visible/ultraviolet/X-ray electronic absorption and circular dichroism spectra, but also time-resolved linear response signals as due to ultra-short weak laser pulses.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Post-remediation geophysical assessment: Investigating long-term electrical geophysical signatures resulting from bioremediation at a chlorinated solvent contaminated site

There is a growing need to assess long-term impacts of active remediation strategies on treated aquifers. A variety of biogeochemical alterations can result from interactions of the amendment with the aquifer, conceivably leading to a geophysical footprint of the long-term alteration of an aquifer. This concept of post-remediation geophysical assessment was investigated in a shallow, chlorinated solvent-contaminated aquifer six to eight years after amendment delivery. Surface resistivity imaging and cross-borehole resistivity and induced polarization (IP) imaging were performed on a transect that spanned treated and untreated zones of the aquifer. Established relationships between IP parameters and surface electrical conductivity were used to predict vertical profiles of electrolytic conductivity and surface conductivity from the inverted cross-borehole images. Aqueous geochemistry data, along with natural gamma and magnetic susceptibility logs, were used to constrain the interpretation. The electrical conductivity structure determined from surface and borehole imaging was foremost controlled by the electrolytic conductivity of the interconnected pore space, being linearly related to fluid specific conductance. The electrolytic conductivity (and thus the conductivity images alone) did not discriminate between treated and untreated zones of the aquifer. In contrast, inverted phase angles and surface conductivities did discriminate between treated and untreated zones of the aquifer, with the treated zone being up to an order of magnitude more polarizable in places. Supporting aqueous chemistry and borehole logging datasets indicate that this geophysical footprint of the long-term impact of the remediation on the aquifer is most likely associated with the formation of polarizable, dispersed iron sulfide minerals. The study opens the door to the possibility of employing time-lapse electrical geophysical measurements to assist with long-term environmental stewardship of legacy sites undergoing active remediation.

bioremediation↗
DOE OSTI2023

Chemistry and Dynamics of Supercritical Carbon Dioxide and Methane in the Slit Pores of Layered Silicates

In the mid 2010s, high-pressure diffraction and spectroscopic tools opened a window into the molecular-scale behavior of fluids at the conditions of many CO 2 sequestration and shale/tight gas reservoirs - conditions where CO 2 and CH 4 are present as variably wet supercritical fluids. Integrating high-pressure spectroscopy and diffraction with molecular modeling has revealed much about the ways that supercritical CO 2 and CH 4 behave in reservoir components, particularly in the slit-shaped micro- and meso-pores of layered silicates (phyllosilicates) abundant in caprocks and shales. This Account summarizes how supercritical CO 2 and CH 4 behave in the slit pores of swelling phyllosilicates as functions of the H 2 O activity, framework structural features, and charge-balancing cation properties at 90 bar and 323 K – conditions similar to a reservoir at ~1 km depth. Slit pores containing cations with large radii, low hydration energy, and large polarizability readily interact with CO 2 , allowing CO 2 and H 2 O to adsorb and co-exist in these interlayer pores over a wide range of fluid humidities. In contrast, cations with small radii, high hydration energy, and low polarizability weakly interact with CO 2 leading to reduced CO 2 uptake and a tendency to exclude CO 2 from interlayers when H 2 O is abundant. The reorientation dynamics of confined CO 2 depends on the interlayer pore height, which is strongly influenced by the cation properties, framework properties, and fluid humidity. The silicate structural framework also influences CO 2 uptake and behavior - for example, smectites with increasing F-for-OH substitution in the framework take up greater quantities of CO 2 . Reactions that trap CO 2 in carbonate phases have been observed in thin H 2 O films near smectite surfaces, including a dissolution-reprecipitation mechanism when the edge surface area is high and an ion exchange-precipitation mechanism when the interlayer cation can form a highly insoluble carbonate. In contrast, supercritical CH 4 does not readily associate with cations, does not react with smectites, and is only incorporated into interlayer slit mesopores when (i) the pore has a $z$-dimension large enough to accommodate CH 4 , (ii) the smectite has low charge and (iii) the H 2 O activity is low. In conclusion, the adsorption and displacement of CH 4 by CO 2 and vice-versa have been studied on the molecular scale in one shale, but opportunities remain to examine behavioral details in this more complicated, slit-pore inclusive system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Accurate calculation of many-body energies in water clusters using a classical geometry-dependent induction model

We incorporate geometry-dependent distributed multipole and polarizability surfaces into an induction model that is used to describe the 3- and 4-body terms of the interaction between water molecules. The expansion is carried out up to hexadecapole with the multipoles distributed on the atom sites. Dipole-dipole, dipole-quadrupole, and quadrupole-quadrupole distributed polarizabilities are used to represent the response of the multipoles to an electric field. We compare the model against two large databases consisting of 43,844 3-body terms and 3,603 4-body terms obtained from high level ab initio calculations previously used to fit the MB-pol and q-AQUA interaction potentials. The classical induction model with no adjustable parameters reproduces the ab-initio 3- and 4-body terms contained in these teo Databases with a Root-Mean-Square-Error (RMSE) of 0.104/0.058 and a Mean-Absolute-Error (MAE) of 0.054/0.026 kcal/mol, respectively, results that are on a par with those obtained 1 by fitting the same data using tens of thousands of Permutationally Invariant Polynomials (PIPs). This demonstrates the accuracy of this physically motivated model in describing the 3- and 4-body terms in the interactions between water molecules with no adjustable parameters. The triple-dipole-dispersion energy was included in the 3-body energy and was found to be small but not quite negligible. The model represents a practical, efficient and transferable approach for obtaining accurate non-additive interactions for multi-component systems without the need of performing tens of thousands of high level electronic structure calculations and fitting them with tens of thousands of PIPs.

molecular analysis water, aqueous↗